Skip to contentSkip to conversation

patch "usb: cdc_acm: Add quirk for Uniden UBC125 scanner" added to usb-linus

PATCH [email protected] 1 participant 1 message Jun 25, 2018

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

usb: cdc_acm: Add quirk for Uniden UBC125 scanner

to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

Quoted 1 line

From 4a762569a2722b8a48066c7bacf0e1dc67d17fa1 Mon Sep 17 00:00:00 2001

From: Houston Yaroschoff <[email protected]>
Date: Mon, 11 Jun 2018 12:39:09 +0200
Subject: usb: cdc_acm: Add quirk for Uniden UBC125 scanner

Uniden UBC125 radio scanner has USB interface which fails to work with cdc_acm driver:
usb 1-1.5: new full-speed USB device number 4 using xhci_hcd cdc_acm 1-1.5:1.0: Zero length descriptor references
cdc_acm: probe of 1-1.5:1.0 failed with error -22

Adding the NO_UNION_NORMAL quirk for the device fixes the issue:
usb 1-4: new full-speed USB device number 15 using xhci_hcd usb 1-4: New USB device found, idVendor=1965, idProduct=0018 usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4: Product: UBC125XLT
usb 1-4: Manufacturer: Uniden Corp.
usb 1-4: SerialNumber: 0001
cdc_acm 1-4:1.0: ttyACM0: USB ACM device

lsusb -v of the device:

Bus 001 Device 015: ID 1965:0018 Uniden Corporation Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1965 Uniden Corporation
idProduct 0x0018
bcdDevice 0.01
iManufacturer 1 Uniden Corp.
iProduct 2 UBC125XLT
iSerial 3 0001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 48
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 0 None
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)

---
 drivers/usb/class/cdc-acm.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/usb/class/cdc-acm.c +3 -0
index 7b366a6c0b49..998b32d0167e 100644
@@ -1758,6 +1758,9 @@ static const struct usb_device_id acm_ids[] = {
 	{ USB_DEVICE(0x11ca, 0x0201), /* VeriFone Mx870 Gadget Serial */
 	.driver_info = SINGLE_RX_URB,
 	},
+	{ USB_DEVICE(0x1965, 0x0018), /* Uniden UBC125XLT */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
 	{ USB_DEVICE(0x22b8, 0x7000), /* Motorola Q Phone */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
Signature · 1 line
2.18.0