Skip to contentSkip to conversation

iommu/arm-smmu: Add Stratix10 SMMU Support

PATCH In review [email protected] 3 participants 6 messages Jul 25, 2018 – Aug 17, 2018

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

cover iommu/arm-smmu: Add Stratix10 SMMU Support

From: Thor Thayer <[email protected]>

Add SMMU support for the Stratix10 SOCFPGA. This patch requires clock enables for the master TBUs and therefore has a dependency on patches currently being reviewed.

This patchset is dependent on the patch series
"iommu/arm-smmu: Add runtime pm/sleep support"
(https://patchwork.ozlabs.org/cover/946160/)

Thor Thayer (2):
arm64: dts: stratix10: Add Stratix10 SMMU support iommu/arm-smmu: Add support for Stratix10 smmu-v2 variant

 .../devicetree/bindings/iommu/arm,smmu.txt         | 25 ++++++++++++++++++
 arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi  | 30 ++++++++++++++++++++++
 drivers/iommu/arm-smmu.c                           | 12 +++++++++
 3 files changed, 67 insertions(+)
Signature · 1 line
2.7.4
#1 lore raw

PATCH 1/2 arm64: dts: stratix10: Add Stratix10 SMMU support

From: Thor Thayer <[email protected]>

Add SMMU support to the Stratix10 Device Tree which includes adding the SMMU node and adding IOMMU stream ids to the SMMU peripherals. Update bindings.

---
This patch is dependent on the patch series "iommu/arm-smmu: Add runtime pm/sleep support"
(https://patchwork.ozlabs.org/cover/946160/)

---
 .../devicetree/bindings/iommu/arm,smmu.txt         | 25 ++++++++++++++++++
 arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi  | 30 ++++++++++++++++++++++
 2 files changed, 55 insertions(+)
Documentation/devicetree/bindings/iommu/arm,smmu.txt +25 -0
index 7c71a6ed465a..8e3fe0594e3e 100644
@@ -18,6 +18,7 @@ conditions.
                         "arm,mmu-500"
                         "cavium,smmu-v2"
                         "qcom,<soc>-smmu-v2", "qcom,smmu-v2"
+                        "altr,smmu-v2"
 
                   depending on the particular implementation and/or the
                   version of the architecture implemented.
@@ -179,3 +180,27 @@ conditions.
 			 <&mmcc SMMU_MDP_AHB_CLK>;
 		clock-names = "bus", "iface";
 	};
+
+	/* Stratix10 arm,smmu-v2 implementation */
+	smmu5: iommu@fa000000 {
+		compatible = "altr,smmu-v2", "arm,mmu-500",
+			     "arm,smmu-v2";
+		reg = <0xfa000000 0x40000>;
+		#global-interrupts = <2>;
+		#iommu-cells = <1>;
+		clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
+		clock-names = "masters";
+		interrupt-parent = <&intc>;
+		interrupts = <0 128 4>,	/* Global Secure Fault */
+			<0 129 4>, /* Global Non-secure Fault */
+			/* Non-secure Context Interrupts (32) */
+			<0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>,
+			<0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>,
+			<0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>,
+			<0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>,
+			<0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>,
+			<0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>,
+			<0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>,
+			<0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>;
+		stream-match-mask = <0x7ff0>;
+	};
arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +30 -0
index d033da401c26..e38ca86d48f6 100644
@@ -137,6 +137,7 @@
 			reset-names = "stmmaceth", "stmmaceth-ocp";
 			clocks = <&clkmgr STRATIX10_EMAC0_CLK>;
 			clock-names = "stmmaceth";
+			iommus = <&smmu 1>;
 			status = "disabled";
 		};
 
@@ -150,6 +151,7 @@
 			reset-names = "stmmaceth", "stmmaceth-ocp";
 			clocks = <&clkmgr STRATIX10_EMAC1_CLK>;
 			clock-names = "stmmaceth";
+			iommus = <&smmu 2>;
 			status = "disabled";
 		};
 
@@ -163,6 +165,7 @@
 			reset-names = "stmmaceth", "stmmaceth-ocp";
 			clocks = <&clkmgr STRATIX10_EMAC2_CLK>;
 			clock-names = "stmmaceth";
+			iommus = <&smmu 3>;
 			status = "disabled";
 		};
 
@@ -273,6 +276,7 @@
 			clocks = <&clkmgr STRATIX10_L4_MP_CLK>,
 				 <&clkmgr STRATIX10_SDMMC_CLK>;
 			clock-names = "biu", "ciu";
+			iommus = <&smmu 5>;
 			status = "disabled";
 		};
 
@@ -307,6 +311,30 @@
 			altr,modrst-offset = <0x20>;
 		};
 
+		smmu: iommu@fa000000 {
+			compatible = "altr,smmu-v2", "arm,mmu-500",
+				     "arm,smmu-v2";
+			reg = <0xfa000000 0x40000>;
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+			clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
+			clock-names = "masters";
+			interrupt-parent = <&intc>;
+			interrupts = <0 128 4>,	/* Global Secure Fault */
+				<0 129 4>, /* Global Non-secure Fault */
+				/* Non-secure Context Interrupts (32) */
+				<0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>,
+				<0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>,
+				<0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>,
+				<0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>,
+				<0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>,
+				<0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>,
+				<0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>,
+				<0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>;
+			stream-match-mask = <0x7ff0>;
+			status = "disabled";
+		};
+
 		spi0: spi@ffda4000 {
 			compatible = "snps,dw-apb-ssi";
 			#address-cells = <1>;
@@ -416,6 +444,7 @@
 			resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
 			reset-names = "dwc2", "dwc2-ecc";
 			clocks = <&clkmgr STRATIX10_USB_CLK>;
+			iommus = <&smmu 6>;
 			status = "disabled";
 		};
 
@@ -428,6 +457,7 @@
 			resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
 			reset-names = "dwc2", "dwc2-ecc";
 			clocks = <&clkmgr STRATIX10_USB_CLK>;
+			iommus = <&smmu 7>;
 			status = "disabled";
 		};
 
Signature · 1 line
2.7.4
#5 lore raw

PATCH 2/2 iommu/arm-smmu: Add support for Stratix10 smmu-v2 variant

In reply to [email protected]

From: Thor Thayer <[email protected]>

Add the clocks required for the Stratix10 SMMU. Define the clock names in the SMMU name array and add DT compatible matching element.

---
This patch is dependent on the patch series
"iommu/arm-smmu: Add runtime pm/sleep support"
(https://patchwork.ozlabs.org/cover/946160/)

---
 drivers/iommu/arm-smmu.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
drivers/iommu/arm-smmu.c +12 -0
index 7c69736a30f8..d46216b34a77 100644
@@ -1983,6 +1983,17 @@ static const struct arm_smmu_match_data qcom_smmuv2 = {
 	.num_clks = ARRAY_SIZE(qcom_smmuv2_clks),
 };
 
+static const char * const altr_smmuv2_clks[] = {
+	"masters"
+};
+
+static const struct arm_smmu_match_data altr_smmuv2 = {
+	.version = ARM_SMMU_V2,
+	.model = ARM_MMU500,
+	.clks = altr_smmuv2_clks,
+	.num_clks = ARRAY_SIZE(altr_smmuv2_clks),
+};
+
 static const struct of_device_id arm_smmu_of_match[] = {
 	{ .compatible = "arm,smmu-v1", .data = &smmu_generic_v1 },
 	{ .compatible = "arm,smmu-v2", .data = &smmu_generic_v2 },
@@ -1991,6 +2002,7 @@ static const struct of_device_id arm_smmu_of_match[] = {
 	{ .compatible = "arm,mmu-500", .data = &arm_mmu500 },
 	{ .compatible = "cavium,smmu-v2", .data = &cavium_smmuv2 },
 	{ .compatible = "qcom,smmu-v2", .data = &qcom_smmuv2 },
+	{ .compatible = "altr,smmu-v2", .data = &altr_smmuv2 },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, arm_smmu_of_match);
Signature · 1 line
2.7.4
maintainer Reviewed-by on v1 1/2
#2 lore raw

Re: [PATCH 1/2] arm64: dts: stratix10: Add Stratix10 SMMU support

In reply to [email protected]
Quoted 11 lines · thor.thayer at linux.intel.com

From: Thor Thayer <[email protected]>

Add SMMU support to the Stratix10 Device Tree which includes adding the SMMU node and adding IOMMU stream ids to the SMMU peripherals. Update bindings.

---
This patch is dependent on the patch series "iommu/arm-smmu: Add runtime pm/sleep support"
(https://patchwork.ozlabs.org/cover/946160/)

I don't think so.

Quoted 4 lines
---
 .../devicetree/bindings/iommu/arm,smmu.txt         | 25 ++++++++++++++++++
 arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi  | 30 ++++++++++++++++++++++
 2 files changed, 55 insertions(+)
reviewer
#3 lore raw

Re: [PATCH 1/2] arm64: dts: stratix10: Add Stratix10 SMMU support

In reply to [email protected]
Quoted 21 lines · thor.thayer at linux.intel.com

From: Thor Thayer <[email protected]>

Add SMMU support to the Stratix10 Device Tree which includes adding the SMMU node and adding IOMMU stream ids to the SMMU peripherals. Update bindings.

---
This patch is dependent on the patch series "iommu/arm-smmu: Add runtime pm/sleep support"
(https://patchwork.ozlabs.org/cover/946160/)

---
  .../devicetree/bindings/iommu/arm,smmu.txt         | 25 ++++++++++++++++++
  arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi  | 30 ++++++++++++++++++++++
  2 files changed, 55 insertions(+)
Documentation/devicetree/bindings/iommu/arm,smmu.txt +0 -0
index 7c71a6ed465a..8e3fe0594e3e 100644

Documentation/devicetree/bindings/iommu/arm,smmu.txt conditions. · line 21

Quoted 4 lines
Documentation/devicetree/bindings/iommu/arm,smmu.txt +1 -0
@@ -18,6 +18,7 @@ conditions.
                          "arm,mmu-500"
                          "cavium,smmu-v2"
                          "qcom,<soc>-smmu-v2", "qcom,smmu-v2"
+                        "altr,smmu-v2"

Can we guarantee that no Altera SoC will ever exist with a different SMMU implementation, configuration, or clock tree? If we must have compatibles for SoC-specific integrations, I'd be a lot happier if they were actually SoC-specific, i.e. at least "altr,stratix10-smmu", or even something like "altr,gx5500-smmu" if there's a chance of new incompatible designs being added to the Stratix 10 family in future.

I'm still dubious that we actually need this for MMU-500, though, since we will always need the TCU clock enabled to do anything, and given the difficulty in associating particular TBU clocks with whichever domains might cause allocations into which TBU's TLBs, it seems highly unlikely that it'll ever be feasible to work at a granularity finer than "all of the clocks". And at that point the names don't really matter, and we merely need something like the proposed of_clk_bulk_get()[1], which works fine regardless of how many TBUs and distinct clocks exist for a particular MMU-500 configuration and integration.

Quoted 7 lines
Documentation/devicetree/bindings/iommu/arm,smmu.txt +0 -0
                    depending on the particular implementation and/or the
                    version of the architecture implemented.
@@ -179,3 +180,27 @@ conditions.
  			 <&mmcc SMMU_MDP_AHB_CLK>;
  		clock-names = "bus", "iface";
  	};

Documentation/devicetree/bindings/iommu/arm,smmu.txt conditions. · line 192

Quoted 10 lines
Documentation/devicetree/bindings/iommu/arm,smmu.txt +10 -0
+
+	/* Stratix10 arm,smmu-v2 implementation */
+	smmu5: iommu at fa000000 {
+		compatible = "altr,smmu-v2", "arm,mmu-500",
+			     "arm,smmu-v2";
+		reg = <0xfa000000 0x40000>;
+		#global-interrupts = <2>;
+		#iommu-cells = <1>;
+		clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
+		clock-names = "masters";

This isn't documented as an actual property, and if it also clocks the TCU then I'm not sure it's really the most accurate name.

Robin.

[1] https://patchwork.kernel.org/patch/10427095/

Quoted 98 lines
Documentation/devicetree/bindings/iommu/arm,smmu.txt +14 -0
+		interrupt-parent = <&intc>;
+		interrupts = <0 128 4>,	/* Global Secure Fault */
+			<0 129 4>, /* Global Non-secure Fault */
+			/* Non-secure Context Interrupts (32) */
+			<0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>,
+			<0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>,
+			<0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>,
+			<0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>,
+			<0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>,
+			<0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>,
+			<0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>,
+			<0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>;
+		stream-match-mask = <0x7ff0>;
+	};
arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +30 -0
index d033da401c26..e38ca86d48f6 100644
@@ -137,6 +137,7 @@
  			reset-names = "stmmaceth", "stmmaceth-ocp";
  			clocks = <&clkmgr STRATIX10_EMAC0_CLK>;
  			clock-names = "stmmaceth";
+			iommus = <&smmu 1>;
  			status = "disabled";
  		};
 
@@ -150,6 +151,7 @@
  			reset-names = "stmmaceth", "stmmaceth-ocp";
  			clocks = <&clkmgr STRATIX10_EMAC1_CLK>;
  			clock-names = "stmmaceth";
+			iommus = <&smmu 2>;
  			status = "disabled";
  		};
 
@@ -163,6 +165,7 @@
  			reset-names = "stmmaceth", "stmmaceth-ocp";
  			clocks = <&clkmgr STRATIX10_EMAC2_CLK>;
  			clock-names = "stmmaceth";
+			iommus = <&smmu 3>;
  			status = "disabled";
  		};
 
@@ -273,6 +276,7 @@
  			clocks = <&clkmgr STRATIX10_L4_MP_CLK>,
  				 <&clkmgr STRATIX10_SDMMC_CLK>;
  			clock-names = "biu", "ciu";
+			iommus = <&smmu 5>;
  			status = "disabled";
  		};
 
@@ -307,6 +311,30 @@
  			altr,modrst-offset = <0x20>;
  		};
 
+		smmu: iommu at fa000000 {
+			compatible = "altr,smmu-v2", "arm,mmu-500",
+				     "arm,smmu-v2";
+			reg = <0xfa000000 0x40000>;
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+			clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
+			clock-names = "masters";
+			interrupt-parent = <&intc>;
+			interrupts = <0 128 4>,	/* Global Secure Fault */
+				<0 129 4>, /* Global Non-secure Fault */
+				/* Non-secure Context Interrupts (32) */
+				<0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>,
+				<0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>,
+				<0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>,
+				<0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>,
+				<0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>,
+				<0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>,
+				<0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>,
+				<0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>;
+			stream-match-mask = <0x7ff0>;
+			status = "disabled";
+		};
+
  		spi0: spi at ffda4000 {
  			compatible = "snps,dw-apb-ssi";
  			#address-cells = <1>;
@@ -416,6 +444,7 @@
  			resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
  			reset-names = "dwc2", "dwc2-ecc";
  			clocks = <&clkmgr STRATIX10_USB_CLK>;
+			iommus = <&smmu 6>;
  			status = "disabled";
  		};
 
@@ -428,6 +457,7 @@
  			resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
  			reset-names = "dwc2", "dwc2-ecc";
  			clocks = <&clkmgr STRATIX10_USB_CLK>;
+			iommus = <&smmu 7>;
  			status = "disabled";
  		};
 
#4 lore raw

Re: [PATCH 1/2] arm64: dts: stratix10: Add Stratix10 SMMU support

Hi Robin,

Quoted 19 lines · Robin Murphy
Quoted 18 lines · On 25/07/18 19:24, [email protected] wrote:

From: Thor Thayer <[email protected]>

Add SMMU support to the Stratix10 Device Tree which includes adding the SMMU node and adding IOMMU stream ids to the SMMU peripherals. Update bindings.

---
This patch is dependent on the patch series "iommu/arm-smmu: Add runtime pm/sleep support"
(https://patchwork.ozlabs.org/cover/946160/)
---
  .../devicetree/bindings/iommu/arm,smmu.txt         | 25
++++++++++++++++++
  arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi  | 30
++++++++++++++++++++++

  2 files changed, 55 insertions(+)
Quoted 12 lines
Quoted 9 lines
Documentation/devicetree/bindings/iommu/arm,smmu.txt +0 -0
index 7c71a6ed465a..8e3fe0594e3e 100644
@@ -18,6 +18,7 @@ conditions.

                          "arm,mmu-500" "cavium,smmu-v2" "qcom,<soc>-smmu-v2", "qcom,smmu-v2" +                        "altr,smmu-v2"

Can we guarantee that no Altera SoC will ever exist with a different SMMU implementation, configuration, or clock tree? If we must have compatibles for SoC-specific integrations, I'd be a lot happier if they were actually SoC-specific, i.e. at least "altr,stratix10-smmu", or even something like "altr,gx5500-smmu" if there's a chance of new incompatible designs being added to the Stratix 10 family in future.

Good point. I'll get a better compatible string if I pursue this.

Quoted 2 lines

I'm still dubious that we actually need this for MMU-500, though, since we will always need the TCU clock enabled to do anything, and given the difficulty in associating particular TBU clocks with whichever domains might cause allocations into which TBU's TLBs, it seems highly unlikely that it'll ever be feasible to work at a granularity finer than "all of the clocks". And at that point the names don't really matter, and we merely need something like the proposed of_clk_bulk_get()[1], which works fine regardless of how many TBUs and distinct clocks exist for a particular MMU-500 configuration and integration.

Yes, I would prefer to use the standard arm,mmu-500 but with the changes proposed by [2] that this patch was dependent on, it seemed I would need to make a new structure and type.

I like the patch series for devm_clk_bulk_get_all() that includes of_clk_bulk_get(). That would enable my patch to work with minor changes to add bulk_clk to arm-smmu.c. However, the patchset doesn't seem to have been accepted yet.

Quoted 19 lines
Quoted 6 lines

                    depending on the particular implementation and/or the version of the architecture implemented.

Documentation/devicetree/bindings/iommu/arm,smmu.txt +0 -0
@@ -179,3 +180,27 @@ conditions.
                <&mmcc SMMU_MDP_AHB_CLK>;
           clock-names = "bus", "iface";
       };

Documentation/devicetree/bindings/iommu/arm,smmu.txt conditions. · line 192

Quoted 10 lines
Documentation/devicetree/bindings/iommu/arm,smmu.txt +10 -0
+
+    /* Stratix10 arm,smmu-v2 implementation */
+    smmu5: iommu@fa000000 {
+        compatible = "altr,smmu-v2", "arm,mmu-500",
+                 "arm,smmu-v2";
+        reg = <0xfa000000 0x40000>;
+        #global-interrupts = <2>;
+        #iommu-cells = <1>;
+        clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
+        clock-names = "masters";

This isn't documented as an actual property, and if it also clocks the TCU then I'm not sure it's really the most accurate name.

Quoted 3 lines

Robin.

[1] https://patchwork.kernel.org/patch/10427095/

In the patch I'll remove the clock-names.

I'll keep track of the status of this patch (and [3] from the same patchset). I tested a simple patch that uses devm_clk_bulk_get_all() from these bulk_clk patches and it works well with the standard "arm,mmu-500" compatible.

This patch has dependencies on [2]. It seems like [2] could use the bulk_clk patches in [1] above (in particular [2]'s patch 1/4). The function arm_smmu_fill_clk_data() wouldn't be needed because everything happens in devm_clk_bulk_get_all(). However, those bulk_clk patches have been hanging out there since May.

I'm unclear on how to proceed. Do I continue with dependency on [2] or create a new patch adding the bulk clocks changes in [1] (and [3])?

Thanks for reviewing!

Thor

[2] https://patchwork.kernel.org/patch/10546677/
[3] https://patchwork.kernel.org/patch/10427079/

Quoted 93 lines
Quoted 92 lines
Documentation/devicetree/bindings/iommu/arm,smmu.txt +14 -0
+        interrupt-parent = <&intc>;
+        interrupts = <0 128 4>,    /* Global Secure Fault */
+            <0 129 4>, /* Global Non-secure Fault */
+            /* Non-secure Context Interrupts (32) */
+            <0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>,
+            <0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>,
+            <0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>,
+            <0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>,
+            <0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>,
+            <0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>,
+            <0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>,
+            <0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>;
+        stream-match-mask = <0x7ff0>;
+    };
arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +30 -0
index d033da401c26..e38ca86d48f6 100644
@@ -137,6 +137,7 @@
               reset-names = "stmmaceth", "stmmaceth-ocp";
               clocks = <&clkmgr STRATIX10_EMAC0_CLK>;
               clock-names = "stmmaceth";
+            iommus = <&smmu 1>;
               status = "disabled";
           };
@@ -150,6 +151,7 @@
               reset-names = "stmmaceth", "stmmaceth-ocp";
               clocks = <&clkmgr STRATIX10_EMAC1_CLK>;
               clock-names = "stmmaceth";
+            iommus = <&smmu 2>;
               status = "disabled";
           };
@@ -163,6 +165,7 @@
               reset-names = "stmmaceth", "stmmaceth-ocp";
               clocks = <&clkmgr STRATIX10_EMAC2_CLK>;
               clock-names = "stmmaceth";
+            iommus = <&smmu 3>;
               status = "disabled";
           };
@@ -273,6 +276,7 @@
               clocks = <&clkmgr STRATIX10_L4_MP_CLK>,
                    <&clkmgr STRATIX10_SDMMC_CLK>;
               clock-names = "biu", "ciu";
+            iommus = <&smmu 5>;
               status = "disabled";
           };
@@ -307,6 +311,30 @@
               altr,modrst-offset = <0x20>;
           };
+        smmu: iommu@fa000000 {
+            compatible = "altr,smmu-v2", "arm,mmu-500",
+                     "arm,smmu-v2";
+            reg = <0xfa000000 0x40000>;
+            #global-interrupts = <2>;
+            #iommu-cells = <1>;
+            clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
+            clock-names = "masters";
+            interrupt-parent = <&intc>;
+            interrupts = <0 128 4>,    /* Global Secure Fault */
+                <0 129 4>, /* Global Non-secure Fault */
+                /* Non-secure Context Interrupts (32) */
+                <0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>,
+                <0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>,
+                <0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>,
+                <0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>,
+                <0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>,
+                <0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>,
+                <0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>,
+                <0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>;
+            stream-match-mask = <0x7ff0>;
+            status = "disabled";
+        };
+
           spi0: spi@ffda4000 {
               compatible = "snps,dw-apb-ssi";
               #address-cells = <1>;
@@ -416,6 +444,7 @@
               resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
               reset-names = "dwc2", "dwc2-ecc";
               clocks = <&clkmgr STRATIX10_USB_CLK>;
+            iommus = <&smmu 6>;
               status = "disabled";
           };
@@ -428,6 +457,7 @@
               resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
               reset-names = "dwc2", "dwc2-ecc";
               clocks = <&clkmgr STRATIX10_USB_CLK>;
+            iommus = <&smmu 7>;
               status = "disabled";
           };