patch "usb: uas: add support for more quirk flags" added to usb-linus
Subsystems (4)
This is a note to let you know that I've just added the patch titled
usb: uas: add support for more quirk flags
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.
The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.
If you have any questions about this process, please let me know.
Quoted 1 line
From
42d1c6d4a06a77b3ab206a919b9050c3080f3a71Mon Sep 17 00:00:00 2001
From: Oliver Neukum <[email protected]>
Date: Thu, 9 Aug 2018 16:03:37 +0200
Subject: usb: uas: add support for more quirk flags
The hope that UAS devices would be less broken than old style storage devices has turned out to be unfounded. Make UAS support more of the quirk flags of the old driver.
--- drivers/usb/storage/uas.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
drivers/usb/storage/uas.c +21 -0
@@ -842,6 +842,27 @@ static int uas_slave_configure(struct scsi_device *sdev) sdev->skip_ms_page_8 =1 ; sdev->wce_default_on =1 ; } + +/* +* Some disks return the total number of blocks in response +* to READ CAPACITY rather than the highest block number. +* If this device makes that mistake, tell the sd driver. +*/ +if (devinfo->flags &US_FL_FIX_CAPACITY ) + sdev->fix_capacity =1 ; + +/* +* Some devices don't like MODE SENSE with page=0x3f, +* which is the command used for checking if a device +* is write-protected. Now that we tell the sd driver +* to do a 192-byte transfer with this command the +* majority of devices work fine, but a few still can't +* handle it. The sd driver will simply assume those +* devices are write-enabled. +*/ +if (devinfo->flags &US_FL_NO_WP_DETECT ) + sdev->skip_ms_page_3f =1 ; +scsi_change_queue_depth (sdev, devinfo->qdepth -2 );return 0 ; }
Signature · 1 line
2.18.0