hwmon: (nct6775) Fix temperature sources for NCT6796D
Guenter Roeck
maintainerPATCH 1/2 hwmon: (nct6775) Fix temperature sources for NCT6796D
The following kernel log message is reported for the nct6775 driver on ASUS WS X299 SAGE.
nct6775: Found NCT6796D or compatible chip at 0x2e:0x290 nct6775 nct6775.656: Invalid temperature source 11 at index 0,
source register 0x100, temp register 0x73 nct6775 nct6775.656: Invalid temperature source 11 at index 2, source register 0x300, temp register 0x77 nct6775 nct6775.656: Invalid temperature source 11 at index 3, source register 0x800, temp register 0x79 nct6775 nct6775.656: Invalid temperature source 11 at index 4, source register 0x900, temp register 0x7b
A recent version of the datasheet lists temperature source 11 as reserved. However, an older version of the datasheet lists temperature sources 10 and 11 as supported virtual temperature sources. Apparently the older version of the datasheet is correct, so list those temperature sources as supported.
--- drivers/hwmon/nct6775.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/hwmon/nct6775.c +4 -4
@@ -725,8 +725,8 @@ static const char *const nct6796_temp_label[] = {"AUXTIN4" ,"SMBUSMASTER 0" ,"SMBUSMASTER 1" , -"" , -"" , +"Virtual_TEMP2" , +"Virtual_TEMP3" ,"" ,"" , "",
@@ -746,10 +746,10 @@ static const char *const nct6796_temp_label[] = {"PECI Agent 0 Calibration" ,"PECI Agent 1 Calibration" ,"" , - "Virtual_TEMP" + "Virtual_TEMP1" }; -#define NCT6796_TEMP_MASK 0xbfff03fe +#define NCT6796_TEMP_MASK 0xbfff0ffe/* NCT6102D/NCT6106D specific data */
Signature · 1 line
2.7.4
Guenter Roeck
maintainerPATCH 2/2 hwmon: (nct6775) Fix RPM output for fan7 on NCT6796D
fan7 on NCT6796D does not have a fan count register; it only has an RPM register. Switch to using RPM registers to read the fan speed for all chips supporting it to solve the problem for good.
--- drivers/hwmon/nct6775.c | 36 +++++++++++++++++++++++++----------- 1 file changed, 25 insertions(+), 11 deletions(-)
drivers/hwmon/nct6775.c +25 -11
@@ -501,8 +501,8 @@ static const s8 NCT6779_BEEP_BITS[] = {16 ,17 ,-1 ,-1 ,-1 ,-1 ,/* temp1..temp6 */ 30, 31 }; /* intrusion0, intrusion1 */ -static const u16 NCT6779_REG_FAN [] = { -0x4b0 ,0x4b2 ,0x4b4 ,0x4b6 ,0x4b8 ,0x4ba ,0x660 }; +static const u16 NCT6779_REG_FAN_RPM [] = { +0x4c0 ,0x4c2 ,0x4c4 ,0x4c6 ,0x4c8 ,0x4ca };static const u16 NCT6779_REG_FAN_PULSES [NUM_FAN ] = {0x644 ,0x645 ,0x646 ,0x647 ,0x648 ,0x649 };
@@ -677,6 +677,9 @@ static const char *const nct6793_temp_label[] = {#define NCT6793_TEMP_MASK 0xbfff037e +static const u16 NCT6795_REG_FAN_RPM [] = { +0x656 ,0x658 ,0x65a ,0x65c ,0x65e ,0x654 ,0x660 }; +static const char *const nct6795_temp_label[] = {"" ,"SYSTIN" ,
@@ -984,6 +987,7 @@ struct nct6775_data {const u16 *REG_TARGET ;const u16 *REG_FAN ; +const u16 *REG_FAN_RPM ;const u16 *REG_FAN_MODE ;const u16 *REG_FAN_MIN ;const u16 *REG_FAN_PULSES ;
@@ -1277,11 +1281,12 @@ static bool is_word_sized(struct nct6775_data *data, u16 reg)case nct6795:case nct6796:return reg ==0x150 || reg ==0x153 || reg ==0x155 || - ((reg &0xfff0 ) ==0x4b0 && (reg &0x000f ) <0x0b ) || + (reg &0xfff0 ) ==0x4c0 || reg ==0x402 || reg ==0x63a || reg ==0x63c || reg ==0x63e || reg ==0x640 || reg ==0x642 || reg ==0x64a || - reg ==0x64c || reg ==0x660 || + reg ==0x64c || + (reg &0xfff0 ) ==0x650 || reg ==0x660 || reg ==0x73 || reg ==0x75 || reg ==0x77 || reg ==0x79 || reg ==0x7b || reg ==0x7d ; }
@@ -1676,10 +1681,6 @@ static struct nct6775_data *nct6775_update_device(struct device *dev)if (!(data->has_fan &BIT (i)))continue ; - reg =nct6775_read_value (data, data->REG_FAN[i]); - data->rpm[i] = data->fan_from_reg (reg, - data->fan_div[i]); -if (data->has_fan_min &BIT (i)) data->fan_min[i] =nct6775_read_value (data, data->REG_FAN_MIN[i]);
@@ -1691,7 +1692,16 @@ static struct nct6775_data *nct6775_update_device(struct device *dev) >> data->FAN_PULSE_SHIFT[i]) & 0x03; } -nct6775_select_fan_div (dev, data, i, reg); +if (data->REG_FAN) { + reg =nct6775_read_value (data, + data->REG_FAN[i]); + data->rpm[i] = data->fan_from_reg (reg, + data->fan_div[i]); +nct6775_select_fan_div (dev, data, i, reg); + }else { + data->rpm[i] =nct6775_read_value (data, + data->REG_FAN_RPM[i]); + } }nct6775_update_pwm (dev);
@@ -3875,7 +3885,7 @@ static int nct6775_probe(struct platform_device *pdev) data->REG_IN_MINMAX[0 ] =NCT6775_REG_IN_MIN ; data->REG_IN_MINMAX[1 ] =NCT6775_REG_IN_MAX ; data->REG_TARGET =NCT6775_REG_TARGET ; - data->REG_FAN =NCT6779_REG_FAN ; + data->REG_FAN_RPM =NCT6779_REG_FAN_RPM ; data->REG_FAN_MODE =NCT6775_REG_FAN_MODE ; data->REG_FAN_MIN =NCT6776_REG_FAN_MIN ; data->REG_FAN_PULSES =NCT6779_REG_FAN_PULSES ;
@@ -3949,22 +3959,27 @@ static int nct6775_probe(struct platform_device *pdev)case nct6791: data->temp_label = nct6779_temp_label; data->temp_mask =NCT6791_TEMP_MASK ; + data->REG_FAN_RPM =NCT6779_REG_FAN_RPM ;break ;case nct6792: data->temp_label = nct6792_temp_label; data->temp_mask =NCT6792_TEMP_MASK ; + data->REG_FAN_RPM =NCT6779_REG_FAN_RPM ;break ;case nct6793: data->temp_label = nct6793_temp_label; data->temp_mask =NCT6793_TEMP_MASK ; + data->REG_FAN_RPM =NCT6779_REG_FAN_RPM ;break ;case nct6795: data->temp_label = nct6795_temp_label; data->temp_mask =NCT6795_TEMP_MASK ; + data->REG_FAN_RPM =NCT6795_REG_FAN_RPM ;break ;case nct6796: data->temp_label = nct6796_temp_label; data->temp_mask =NCT6796_TEMP_MASK ; + data->REG_FAN_RPM =NCT6795_REG_FAN_RPM ;break ; }
@@ -3976,7 +3991,6 @@ static int nct6775_probe(struct platform_device *pdev) data->REG_IN_MINMAX[0 ] =NCT6775_REG_IN_MIN ; data->REG_IN_MINMAX[1 ] =NCT6775_REG_IN_MAX ; data->REG_TARGET =NCT6775_REG_TARGET ; - data->REG_FAN =NCT6779_REG_FAN ; data->REG_FAN_MODE =NCT6775_REG_FAN_MODE ; data->REG_FAN_MIN =NCT6776_REG_FAN_MIN ; data->REG_FAN_PULSES =NCT6779_REG_FAN_PULSES ;
Signature · 1 line
2.7.4