Skip to contentSkip to conversation

FAILED: patch "[PATCH] regulator: bd71837: Disable voltage monitoring for LDO3/4" failed to apply to 4.18-stable tree

PATCH [email protected] 1 participant 1 message Sep 30, 2018

Subsystems (4)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 4.18-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

Quoted 1 line

From 823f18f8b860526fc099c222619a126d57d2ad8c Mon Sep 17 00:00:00 2001

From: Matti Vaittinen <[email protected]>
Date: Wed, 29 Aug 2018 15:36:10 +0300
Subject: [PATCH] regulator: bd71837: Disable voltage monitoring for LDO3/4

There is a HW quirk in BD71837. The shutdown sequence timings for bucks/LDOs which are enabled via register interface are changed. At PMIC poweroff the voltage for BUCK6/7 is cut immediately at the beginning of shut-down sequence. This causes LDO5/6 voltage monitoring to detect under voltage and force PMIC to emergency state instead of poweroff. Disable voltage monitoring for LDO5 and LDO6 at probe to avoid this.

drivers/regulator/bd71837-regulator.c +19 -0
index 0f8ac8dec3e1..a1bd8aaf4d98 100644
@@ -569,6 +569,25 @@ static int bd71837_probe(struct platform_device *pdev)
 			BD71837_REG_REGLOCK);
 	}
 
+	/*
+	 * There is a HW quirk in BD71837. The shutdown sequence timings for
+	 * bucks/LDOs which are controlled via register interface are changed.
+	 * At PMIC poweroff the voltage for BUCK6/7 is cut immediately at the
+	 * beginning of shut-down sequence. As bucks 6 and 7 are parent
+	 * supplies for LDO5 and LDO6 - this causes LDO5/6 voltage
+	 * monitoring to errorneously detect under voltage and force PMIC to
+	 * emergency state instead of poweroff. In order to avoid this we
+	 * disable voltage monitoring for LDO5 and LDO6
+	 */
+	err = regmap_update_bits(pmic->mfd->regmap, BD718XX_REG_MVRFLTMASK2,
+				 BD718XX_LDO5_VRMON80 | BD718XX_LDO6_VRMON80,
+				 BD718XX_LDO5_VRMON80 | BD718XX_LDO6_VRMON80);
+	if (err) {
+		dev_err(&pmic->pdev->dev,
+			"Failed to disable voltage monitoring\n");
+		goto err;
+	}
+
 	for (i = 0; i < ARRAY_SIZE(pmic_regulator_inits); i++) {
 
 		struct regulator_desc *desc;
include/linux/mfd/rohm-bd718x7.h +30 -3
index a528747f8aed..e8338e5dc10b 100644
@@ -78,9 +78,9 @@ enum {
 	BD71837_REG_TRANS_COND0        = 0x1F,
 	BD71837_REG_TRANS_COND1        = 0x20,
 	BD71837_REG_VRFAULTEN          = 0x21,
-	BD71837_REG_MVRFLTMASK0        = 0x22,
-	BD71837_REG_MVRFLTMASK1        = 0x23,
-	BD71837_REG_MVRFLTMASK2        = 0x24,
+	BD718XX_REG_MVRFLTMASK0        = 0x22,
+	BD718XX_REG_MVRFLTMASK1        = 0x23,
+	BD718XX_REG_MVRFLTMASK2        = 0x24,
 	BD71837_REG_RCVCFG             = 0x25,
 	BD71837_REG_RCVNUM             = 0x26,
 	BD71837_REG_PWRONCONFIG0       = 0x27,
@@ -159,6 +159,33 @@ enum {
 #define BUCK8_MASK		0x3F
 #define BUCK8_DEFAULT		0x1E
 
+/* BD718XX Voltage monitoring masks */
+#define BD718XX_BUCK1_VRMON80           0x1
+#define BD718XX_BUCK1_VRMON130          0x2
+#define BD718XX_BUCK2_VRMON80           0x4
+#define BD718XX_BUCK2_VRMON130          0x8
+#define BD718XX_1ST_NODVS_BUCK_VRMON80  0x1
+#define BD718XX_1ST_NODVS_BUCK_VRMON130 0x2
+#define BD718XX_2ND_NODVS_BUCK_VRMON80  0x4
+#define BD718XX_2ND_NODVS_BUCK_VRMON130 0x8
+#define BD718XX_3RD_NODVS_BUCK_VRMON80  0x10
+#define BD718XX_3RD_NODVS_BUCK_VRMON130 0x20
+#define BD718XX_4TH_NODVS_BUCK_VRMON80  0x40
+#define BD718XX_4TH_NODVS_BUCK_VRMON130 0x80
+#define BD718XX_LDO1_VRMON80            0x1
+#define BD718XX_LDO2_VRMON80            0x2
+#define BD718XX_LDO3_VRMON80            0x4
+#define BD718XX_LDO4_VRMON80            0x8
+#define BD718XX_LDO5_VRMON80            0x10
+#define BD718XX_LDO6_VRMON80            0x20
+
+/* BD71837 specific voltage monitoring masks */
+#define BD71837_BUCK3_VRMON80           0x10
+#define BD71837_BUCK3_VRMON130          0x20
+#define BD71837_BUCK4_VRMON80           0x40
+#define BD71837_BUCK4_VRMON130          0x80
+#define BD71837_LDO7_VRMON80            0x40
+
 /* BD71837_REG_IRQ bits */
 #define IRQ_SWRST		0x40
 #define IRQ_PWRON_S		0x20