Enable Plane Input CSC for ICL
Subsystems (2)
v4 cover Enable Plane Input CSC for ICL
This patch series enables plane input csc feature for ICL. This is needed for YUV to RGB conversion on bottom 3 planes on ICL, other planes are handled in the legacy way using fixed function hardware.
This series enables color conversion for Full Range YUV data, limited range handling will be done as a separate patch.
v2: Separated the patch into 2 parts as per Maarten's comments. Addressed Ville and Maarten's review comment.
v3: Redesigned the register macro definition as per Matt's comment. Addressed Maarten's review comment.
v4: Added support for Limited Range Color Handling.
Note: This is currently untested and floated to get feedback on the design and implementation for this feature. In parallel, I will test this on actual ICL hardware and confirm with planar formats.
Uma Shankar (2):
drm/i915/icl: Define Plane Input CSC Coefficient Registers drm/i915/icl: Enable Plane Input CSC for YUV to RGB Conversion
drivers/gpu/drm/i915/i915_reg.h | 50 +++++++++++++++++++++++ drivers/gpu/drm/i915/intel_color.c | 79 ++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_display.c | 23 ++++++++--- drivers/gpu/drm/i915/intel_drv.h | 2 + 4 files changed, 148 insertions(+), 6 deletions(-)
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v4 1/2 drm/i915/icl: Define Plane Input CSC Coefficient Registers
Defined the plane input csc coefficient registers and macros. 6 registers are used to program a total of 9 coefficients, added macros to define each of them for all the planes supporting the feature on pipes. On ICL, bottom 3 planes have this capability.
v2: Segregated the register macro definition as separate patch as per Maarten's suggestion.
v3: Removed a redundant 3rd Pipe register definition and simplified the equally spaced register definition by adding an offset as per Matt's comment.
v4: No Change
--- drivers/gpu/drm/i915/i915_reg.h | 50 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+)
drivers/gpu/drm/i915/i915_reg.h +50 -0
@@ -6569,6 +6569,7 @@ enum {#define _PLANE_COLOR_CTL_3_A 0x703CC/* GLK+ */ #define PLANE_COLOR_PIPE_GAMMA_ENABLE (1 << 30)/* Pre-ICL */ #define PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE (1 << 28) +#define PLANE_COLOR_INPUT_CSC_ENABLE (1 << 20)/* ICL+ */ #define PLANE_COLOR_PIPE_CSC_ENABLE (1 << 23)/* Pre-ICL */ #define PLANE_COLOR_CSC_MODE_BYPASS (0 << 17)#define PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709 (1 << 17)
@@ -6585,6 +6586,55 @@ enum {#define _PLANE_NV12_BUF_CFG_1_A 0x70278#define _PLANE_NV12_BUF_CFG_2_A 0x70378 +/* Input CSC Register Definitions */ +#define _PLANE_INPUT_CSC_RY_GY_1_A 0x701E0 +#define _PLANE_INPUT_CSC_RY_GY_2_A 0x702E0 + +#define _PLANE_INPUT_CSC_RY_GY_1_B 0x711E0 +#define _PLANE_INPUT_CSC_RY_GY_2_B 0x712E0 + +#define _PLANE_INPUT_CSC_RY_GY_1 (pipe) \ + _PIPE(pipe, _PLANE_INPUT_CSC_RY_GY_1_A, \ + _PLANE_INPUT_CSC_RY_GY_1_B) +#define _PLANE_INPUT_CSC_RY_GY_2 (pipe) \ + _PIPE(pipe, _PLANE_INPUT_CSC_RY_GY_2_A, \ + _PLANE_INPUT_CSC_RY_GY_2_B) + +#define PLANE_INPUT_CSC_COEFF_REG (pipe, plane, index) \ + _MMIO_PLANE(plane, _PLANE_INPUT_CSC_RY_GY_1(pipe) + (index) * 4, \ + _PLANE_INPUT_CSC_RY_GY_2(pipe) + (index) * 4) + +#define _PLANE_INPUT_CSC_PREOFF_HI_1_A 0x701F8 +#define _PLANE_INPUT_CSC_PREOFF_HI_2_A 0x702F8 + +#define _PLANE_INPUT_CSC_PREOFF_HI_1_B 0x711F8 +#define _PLANE_INPUT_CSC_PREOFF_HI_2_B 0x712F8 + +#define _PLANE_INPUT_CSC_PREOFF_HI_1 (pipe) \ + _PIPE(pipe, _PLANE_INPUT_CSC_PREOFF_HI_1_A, \ + _PLANE_INPUT_CSC_PREOFF_HI_1_B) +#define _PLANE_INPUT_CSC_PREOFF_HI_2 (pipe) \ + _PIPE(pipe, _PLANE_INPUT_CSC_PREOFF_HI_2_A, \ + _PLANE_INPUT_CSC_PREOFF_HI_2_B) +#define PLANE_INPUT_CSC_PREOFF_REG (pipe, plane, index) \ + _MMIO_PLANE(plane, _PLANE_INPUT_CSC_PREOFF_HI_1(pipe) + (index) * 4, \ + _PLANE_INPUT_CSC_PREOFF_HI_2(pipe) + (index) * 4) + +#define _PLANE_INPUT_CSC_POSTOFF_HI_1_A 0x70204 +#define _PLANE_INPUT_CSC_POSTOFF_HI_2_A 0x70304 + +#define _PLANE_INPUT_CSC_POSTOFF_HI_1_B 0x71204 +#define _PLANE_INPUT_CSC_POSTOFF_HI_2_B 0x71304 + +#define _PLANE_INPUT_CSC_POSTOFF_HI_1 (pipe) \ + _PIPE(pipe, _PLANE_INPUT_CSC_POSTOFF_HI_1_A, \ + _PLANE_INPUT_CSC_POSTOFF_HI_1_B) +#define _PLANE_INPUT_CSC_POSTOFF_HI_2 (pipe) \ + _PIPE(pipe, _PLANE_INPUT_CSC_POSTOFF_HI_2_A, \ + _PLANE_INPUT_CSC_POSTOFF_HI_2_B) +#define PLANE_INPUT_CSC_POSTOFF_REG (pipe, plane, index) \ + _MMIO_PLANE(plane, _PLANE_INPUT_CSC_POSTOFF_HI_1(pipe) + (index) * 4, \ + _PLANE_INPUT_CSC_POSTOFF_HI_2(pipe) + (index) * 4)#define _PLANE_CTL_1_B 0x71180#define _PLANE_CTL_2_B 0x71280
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [v4 1/2] drm/i915/icl: Define Plane Input CSC Coefficient Registers
Quoted 41 lines · Uma Shankar
Defined the plane input csc coefficient registers and macros. 6 registers are used to program a total of 9 coefficients, added macros to define each of them for all the planes supporting the feature on pipes. On ICL, bottom 3 planes have this capability.
v2: Segregated the register macro definition as separate patch as per Maarten's suggestion.
v3: Removed a redundant 3rd Pipe register definition and simplified the equally spaced register definition by adding an offset as per Matt's comment.
v4: No Change
Signed-off-by Uma Shankar <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 50 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+)drivers/gpu/drm/i915/i915_reg.h +6
-0@@ -6569,6 +6569,7 @@ enum {#define _PLANE_COLOR_CTL_3_A 0x703CC/* GLK+ */ #define PLANE_COLOR_PIPE_GAMMA_ENABLE (1 << 30)/* Pre-ICL */ #define PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE (1 << 28) +#define PLANE_COLOR_INPUT_CSC_ENABLE (1 << 20)/* ICL+ */ #define PLANE_COLOR_PIPE_CSC_ENABLE (1 << 23)/* Pre-ICL */ #define PLANE_COLOR_CSC_MODE_BYPASS (0 << 17)#define PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709 (1 << 17)@@ -6585,6 +6586,55 @@ enum {#define _PLANE_NV12_BUF_CFG_1_A 0x70278#define _PLANE_NV12_BUF_CFG_2_A 0x70378 +/* Input CSC Register Definitions */ +#define _PLANE_INPUT_CSC_RY_GY_1_A 0x701E0 +#define _PLANE_INPUT_CSC_RY_GY_2_A 0x702E0 + +#define _PLANE_INPUT_CSC_RY_GY_1_B 0x711E0
drivers/gpu/drm/i915/i915_reg.h enum { · line 6603
Quoted 10 lines
drivers/gpu/drm/i915/i915_reg.h +10
-0+#define _PLANE_INPUT_CSC_RY_GY_2_B 0x712E0 + +#define _PLANE_INPUT_CSC_RY_GY_1 (pipe) \ + _PIPE(pipe, _PLANE_INPUT_CSC_RY_GY_1_A, \ + _PLANE_INPUT_CSC_RY_GY_1_B) +#define _PLANE_INPUT_CSC_RY_GY_2 (pipe) \ + _PIPE(pipe, _PLANE_INPUT_CSC_RY_GY_2_A, \ + _PLANE_INPUT_CSC_RY_GY_2_B) + +#define PLANE_INPUT_CSC_COEFF_REG (pipe, plane, index) \
The _REG suffix on these names could probably be dropped to make them a bit shorter. But otherwise, these match all the offsets I see in the bspec, so
Quoted 44 lines
drivers/gpu/drm/i915/i915_reg.h +34
-0+_MMIO_PLANE (plane,_PLANE_INPUT_CSC_RY_GY_1 (pipe) + (index) *4 , \ + _PLANE_INPUT_CSC_RY_GY_2(pipe) + (index) * 4) + +#define _PLANE_INPUT_CSC_PREOFF_HI_1_A 0x701F8 +#define _PLANE_INPUT_CSC_PREOFF_HI_2_A 0x702F8 + +#define _PLANE_INPUT_CSC_PREOFF_HI_1_B 0x711F8 +#define _PLANE_INPUT_CSC_PREOFF_HI_2_B 0x712F8 + +#define _PLANE_INPUT_CSC_PREOFF_HI_1 (pipe) \ + _PIPE(pipe, _PLANE_INPUT_CSC_PREOFF_HI_1_A, \ + _PLANE_INPUT_CSC_PREOFF_HI_1_B) +#define _PLANE_INPUT_CSC_PREOFF_HI_2 (pipe) \ + _PIPE(pipe, _PLANE_INPUT_CSC_PREOFF_HI_2_A, \ + _PLANE_INPUT_CSC_PREOFF_HI_2_B) +#define PLANE_INPUT_CSC_PREOFF_REG (pipe, plane, index) \ + _MMIO_PLANE(plane, _PLANE_INPUT_CSC_PREOFF_HI_1(pipe) + (index) * 4, \ + _PLANE_INPUT_CSC_PREOFF_HI_2(pipe) + (index) * 4) + +#define _PLANE_INPUT_CSC_POSTOFF_HI_1_A 0x70204 +#define _PLANE_INPUT_CSC_POSTOFF_HI_2_A 0x70304 + +#define _PLANE_INPUT_CSC_POSTOFF_HI_1_B 0x71204 +#define _PLANE_INPUT_CSC_POSTOFF_HI_2_B 0x71304 + +#define _PLANE_INPUT_CSC_POSTOFF_HI_1 (pipe) \ + _PIPE(pipe, _PLANE_INPUT_CSC_POSTOFF_HI_1_A, \ + _PLANE_INPUT_CSC_POSTOFF_HI_1_B) +#define _PLANE_INPUT_CSC_POSTOFF_HI_2 (pipe) \ + _PIPE(pipe, _PLANE_INPUT_CSC_POSTOFF_HI_2_A, \ + _PLANE_INPUT_CSC_POSTOFF_HI_2_B) +#define PLANE_INPUT_CSC_POSTOFF_REG (pipe, plane, index) \ + _MMIO_PLANE(plane, _PLANE_INPUT_CSC_POSTOFF_HI_1(pipe) + (index) * 4, \ + _PLANE_INPUT_CSC_POSTOFF_HI_2(pipe) + (index) * 4)#define _PLANE_CTL_1_B 0x71180#define _PLANE_CTL_2_B 0x71280Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 9 lines
Matt Roper Graphics Software Engineer IoTG Platform Enabling & Development Intel Corporation (916) 356-2795 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v4 2/2 drm/i915/icl: Enable Plane Input CSC for YUV to RGB Conversion
In reply to Uma ShankarPlane input CSC needs to be enabled to convert frambuffers from YUV to RGB. This is needed for bottom 3 planes on ICL, rest of the planes have hardcoded conversion and taken care by the legacy code.
This patch defines the co-efficient values for YUV to RGB conversion in BT709 and BT601 formats. It programs the coefficients and enables the plane input csc unit in hardware.
Note: This is currently untested and floated to get an early feedback on the design and implementation for this feature. In parallel, I will test this on actual ICL hardware and confirm with planar formats.
v2: Addressed Maarten's and Ville's review comments and added the coefficients in a 2D array instead of independent Macros.
v3: Added individual coefficient matrix (9 values) instead of 6 register values as per Maarten's comment. Also addresed a shift issue with B channel coefficient.
v4: Added support for Limited Range Color Handling
--- drivers/gpu/drm/i915/intel_color.c | 79 ++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_display.c | 23 ++++++++--- drivers/gpu/drm/i915/intel_drv.h | 2 + 3 files changed, 98 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/intel_color.c +79 -0
@@ -57,6 +57,15 @@#define CSC_RGB_TO_YUV_RV_GV 0xbce89ad8#define CSC_RGB_TO_YUV_BV 0x1e080000 +#define ROFF (x) (((x) & 0xffff) << 16) +#define GOFF (x) (((x) & 0xffff) << 0) +#define BOFF (x) (((x) & 0xffff) << 16) + +/* Preoffset values for YUV to RGB Conversion */ +#define PREOFF_YUV_TO_RGB_HI 0x800 +#define PREOFF_YUV_TO_RGB_ME 0xF00 +#define PREOFF_YUV_TO_RGB_LO 0x800 +/* * Extract the CSC coefficient from a CTM coefficient (in U32.32 fixed point * format). This macro takes the coefficient we want transformed and the
@@ -643,6 +652,76 @@ int intel_color_check(struct drm_crtc *crtc,return -EINVAL ; } +void icl_program_input_csc_coeff (const struct intel_crtc_state *crtc_state, +const struct intel_plane_state *plane_state) +{ +struct drm_i915_private *dev_priv = +to_i915 (plane_state->base.plane->dev); +struct intel_crtc *crtc =to_intel_crtc (crtc_state->base.crtc); +enum pipe pipe = crtc->pipe; +struct intel_plane *intel_plane = +to_intel_plane (plane_state->base.plane); +enum plane_id plane = intel_plane->id; + +static const u16 input_csc_matrix[][9 ] = { +/* BT.601 full range YCbCr -> full range RGB */ + [DRM_COLOR_YCBCR_BT601 ] = { +0x7AF8 ,7800 ,0x0 , +0x8B28 ,7800 ,0x9AC0 , +0x0 ,7800 ,0x7DD8 , + }, +/* BT.709 full range YCbCr -> full range RGB */ + [DRM_COLOR_YCBCR_BT709 ] = { +0x7C98 ,7800 ,0x0 , +0x9EF8 ,7800 ,0xABF8 , +0x0 ,0x7800 ,0x7ED8 , + }, + }; + +/* Matrix for Limited Range to Full Range Conversion */ +static const u16 input_csc_matrix_lr[][9 ] = { +/* BT.601 Limted range YCbCr -> full range RGB */ + [DRM_COLOR_YCBCR_BT601 ] = { +0x7CC8 ,7950 ,0x0 , +0x8CB8 ,7918 ,0x9C40 , +0x0 ,7918 ,0x7FC8 , + }, +/* BT.709 Limited range YCbCr -> full range RGB */ + [DRM_COLOR_YCBCR_BT709 ] = { +0x7EA8 ,7950 ,0x0 , +0x8888 ,7918 ,0xADA8 , +0x0 ,0x7918 ,0x6870 , + }, + }; +const u16 *csc; + +if (plane_state->base.color_range ==DRM_COLOR_YCBCR_FULL_RANGE ) + csc = input_csc_matrix[plane_state->base.color_encoding]; +else + csc = input_csc_matrix_lr[plane_state->base.color_encoding]; + +I915_WRITE (PLANE_INPUT_CSC_COEFF_REG (pipe, plane,0 ),ROFF (csc[0 ]) | +GOFF (csc[1 ])); +I915_WRITE (PLANE_INPUT_CSC_COEFF_REG (pipe, plane,1 ),BOFF (csc[2 ])); +I915_WRITE (PLANE_INPUT_CSC_COEFF_REG (pipe, plane,2 ),ROFF (csc[3 ]) | +GOFF (csc[4 ])); +I915_WRITE (PLANE_INPUT_CSC_COEFF_REG (pipe, plane,3 ),BOFF (csc[5 ])); +I915_WRITE (PLANE_INPUT_CSC_COEFF_REG (pipe, plane,4 ),ROFF (csc[6 ]) | +GOFF (csc[7 ])); +I915_WRITE (PLANE_INPUT_CSC_COEFF_REG (pipe, plane,5 ),BOFF (csc[8 ])); + +I915_WRITE (PLANE_INPUT_CSC_PREOFF_REG (pipe, plane,0 ), +PREOFF_YUV_TO_RGB_HI ); +I915_WRITE (PLANE_INPUT_CSC_PREOFF_REG (pipe, plane,1 ), +PREOFF_YUV_TO_RGB_ME ); +I915_WRITE (PLANE_INPUT_CSC_PREOFF_REG (pipe, plane,2 ), +PREOFF_YUV_TO_RGB_LO ); + +I915_WRITE (PLANE_INPUT_CSC_POSTOFF_REG (pipe, plane,0 ),0x0 ); +I915_WRITE (PLANE_INPUT_CSC_POSTOFF_REG (pipe, plane,1 ),0x0 ); +I915_WRITE (PLANE_INPUT_CSC_POSTOFF_REG (pipe, plane,2 ),0x0 ); +} +void intel_color_init (struct drm_crtc *crtc) {struct drm_i915_private *dev_priv =to_i915 (crtc->dev);
drivers/gpu/drm/i915/intel_display.c +17 -6
@@ -3666,6 +3666,7 @@ u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state,struct drm_i915_private *dev_priv =to_i915 (plane_state->base.plane->dev);const struct drm_framebuffer *fb = plane_state->base.fb; +struct intel_plane *plane =to_intel_plane (plane_state->base.plane);u32 plane_color_ctl =0 ;if (INTEL_GEN (dev_priv) <11 ) {
@@ -3676,13 +3677,23 @@ u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state, plane_color_ctl |=glk_plane_color_ctl_alpha (plane_state);if (fb->format->is_yuv) { -if (plane_state->base.color_encoding ==DRM_COLOR_YCBCR_BT709 ) - plane_color_ctl |=PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709 ; -else - plane_color_ctl |=PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709 ; +if (!icl_is_hdr_plane (plane)) { +if (plane_state->base.color_encoding == +DRM_COLOR_YCBCR_BT709 ) + plane_color_ctl |= +PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709 ; +else + plane_color_ctl |= +PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709 ; -if (plane_state->base.color_range ==DRM_COLOR_YCBCR_FULL_RANGE ) - plane_color_ctl |=PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE ; +if (plane_state->base.color_range == +DRM_COLOR_YCBCR_FULL_RANGE ) + plane_color_ctl |= +PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE ; + }else { +icl_program_input_csc_coeff (crtc_state, plane_state); + plane_color_ctl |=PLANE_COLOR_INPUT_CSC_ENABLE ; + } }return plane_color_ctl;
drivers/gpu/drm/i915/intel_drv.h +2 -0
@@ -2285,6 +2285,8 @@ int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_int intel_color_check (struct drm_crtc *crtc,struct drm_crtc_state *state);void intel_color_set_csc (struct drm_crtc_state *crtc_state);void intel_color_load_luts (struct drm_crtc_state *crtc_state); +void icl_program_input_csc_coeff (const struct intel_crtc_state *crtc_state, +const struct intel_plane_state *plane_state);/* intel_lspcon.c */ bool lspcon_init (struct intel_digital_port *intel_dig_port);
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [v4 2/2] drm/i915/icl: Enable Plane Input CSC for YUV to RGB Conversion
Quoted 36 lines · Uma Shankar
Plane input CSC needs to be enabled to convert frambuffers from YUV to RGB. This is needed for bottom 3 planes on ICL, rest of the planes have hardcoded conversion and taken care by the legacy code.
This patch defines the co-efficient values for YUV to RGB conversion in BT709 and BT601 formats. It programs the coefficients and enables the plane input csc unit in hardware.
Note: This is currently untested and floated to get an early feedback on the design and implementation for this feature. In parallel, I will test this on actual ICL hardware and confirm with planar formats.
v2: Addressed Maarten's and Ville's review comments and added the coefficients in a 2D array instead of independent Macros.
v3: Added individual coefficient matrix (9 values) instead of 6 register values as per Maarten's comment. Also addresed a shift issue with B channel coefficient.
v4: Added support for Limited Range Color Handling
Signed-off-by Uma Shankar <[email protected]>--- drivers/gpu/drm/i915/intel_color.c | 79 ++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_display.c | 23 ++++++++--- drivers/gpu/drm/i915/intel_drv.h | 2 + 3 files changed, 98 insertions(+), 6 deletions(-)drivers/gpu/drm/i915/intel_color.c +0
-0@@ -57,6 +57,15 @@#define CSC_RGB_TO_YUV_RV_GV 0xbce89ad8
drivers/gpu/drm/i915/intel_color.c line 67
Quoted 10 lines
drivers/gpu/drm/i915/intel_color.c +8
-0#define CSC_RGB_TO_YUV_BV 0x1e080000 +#define ROFF (x) (((x) & 0xffff) << 16) +#define GOFF (x) (((x) & 0xffff) << 0) +#define BOFF (x) (((x) & 0xffff) << 16) + +/* Preoffset values for YUV to RGB Conversion */ +#define PREOFF_YUV_TO_RGB_HI 0x800 +#define PREOFF_YUV_TO_RGB_ME 0xF00 +#define PREOFF_YUV_TO_RGB_LO 0x800
Doesn't bit #12 need to be set for each of these values (0x1800, 0x1F00, 0x1800)? At least that's what I came up with based on the assumption that input CSC is programmed the same way as pipe CSC, but I might be overlooking or miscalculating something.
The pipe CSC page gives an example of converting YUV to RGB with a table that matches your csc matrix below, and a note "Program the CSC Pre-Offsets to -1/2, -1/16, and -1/2."
The bspec indicates the register values here are 13-bits (12:0 in the register dword) and are 2's complement fractions allowing values between -1 and 1 (exclusive). So I take that to mean:
1/2 = 0 1000 0000 0000
-1/2 (one's complement) = 1 0111 1111 1111
-1/2 (two's complement) = 1 1000 0000 0000 = 0x1800and
1/16 = 0 0001 0000 0000
-1/16 (one's complement) = 1 1110 1111 1111
-1/16 (two's complement) = 1 1111 0000 0000 = 0x1F00Anyway, it would probably be good to give a comment indicating what the human-readable values you're using are supposed to be and an indication of how the register is programmed to represent those values.
Matt
Quoted 143 lines
drivers/gpu/drm/i915/intel_color.c +71
-0+/* * Extract the CSC coefficient from a CTM coefficient (in U32.32 fixed point * format). This macro takes the coefficient we want transformed and the @@ -643,6 +652,76 @@ int intel_color_check(struct drm_crtc *crtc,return -EINVAL ; } +void icl_program_input_csc_coeff (const struct intel_crtc_state *crtc_state, +const struct intel_plane_state *plane_state) +{ +struct drm_i915_private *dev_priv = +to_i915 (plane_state->base.plane->dev); +struct intel_crtc *crtc =to_intel_crtc (crtc_state->base.crtc); +enum pipe pipe = crtc->pipe; +struct intel_plane *intel_plane = +to_intel_plane (plane_state->base.plane); +enum plane_id plane = intel_plane->id; + +static const u16 input_csc_matrix[][9 ] = { +/* BT.601 full range YCbCr -> full range RGB */ + [DRM_COLOR_YCBCR_BT601 ] = { +0x7AF8 ,7800 ,0x0 , +0x8B28 ,7800 ,0x9AC0 , +0x0 ,7800 ,0x7DD8 , + }, +/* BT.709 full range YCbCr -> full range RGB */ + [DRM_COLOR_YCBCR_BT709 ] = { +0x7C98 ,7800 ,0x0 , +0x9EF8 ,7800 ,0xABF8 , +0x0 ,0x7800 ,0x7ED8 , + }, + }; + +/* Matrix for Limited Range to Full Range Conversion */ +static const u16 input_csc_matrix_lr[][9 ] = { +/* BT.601 Limted range YCbCr -> full range RGB */ + [DRM_COLOR_YCBCR_BT601 ] = { +0x7CC8 ,7950 ,0x0 , +0x8CB8 ,7918 ,0x9C40 , +0x0 ,7918 ,0x7FC8 , + }, +/* BT.709 Limited range YCbCr -> full range RGB */ + [DRM_COLOR_YCBCR_BT709 ] = { +0x7EA8 ,7950 ,0x0 , +0x8888 ,7918 ,0xADA8 , +0x0 ,0x7918 ,0x6870 , + }, + }; +const u16 *csc; + +if (plane_state->base.color_range ==DRM_COLOR_YCBCR_FULL_RANGE ) + csc = input_csc_matrix[plane_state->base.color_encoding]; +else + csc = input_csc_matrix_lr[plane_state->base.color_encoding]; + +I915_WRITE (PLANE_INPUT_CSC_COEFF_REG (pipe, plane,0 ),ROFF (csc[0 ]) | +GOFF (csc[1 ])); +I915_WRITE (PLANE_INPUT_CSC_COEFF_REG (pipe, plane,1 ),BOFF (csc[2 ])); +I915_WRITE (PLANE_INPUT_CSC_COEFF_REG (pipe, plane,2 ),ROFF (csc[3 ]) | +GOFF (csc[4 ])); +I915_WRITE (PLANE_INPUT_CSC_COEFF_REG (pipe, plane,3 ),BOFF (csc[5 ])); +I915_WRITE (PLANE_INPUT_CSC_COEFF_REG (pipe, plane,4 ),ROFF (csc[6 ]) | +GOFF (csc[7 ])); +I915_WRITE (PLANE_INPUT_CSC_COEFF_REG (pipe, plane,5 ),BOFF (csc[8 ])); + +I915_WRITE (PLANE_INPUT_CSC_PREOFF_REG (pipe, plane,0 ), +PREOFF_YUV_TO_RGB_HI ); +I915_WRITE (PLANE_INPUT_CSC_PREOFF_REG (pipe, plane,1 ), +PREOFF_YUV_TO_RGB_ME ); +I915_WRITE (PLANE_INPUT_CSC_PREOFF_REG (pipe, plane,2 ), +PREOFF_YUV_TO_RGB_LO ); + +I915_WRITE (PLANE_INPUT_CSC_POSTOFF_REG (pipe, plane,0 ),0x0 ); +I915_WRITE (PLANE_INPUT_CSC_POSTOFF_REG (pipe, plane,1 ),0x0 ); +I915_WRITE (PLANE_INPUT_CSC_POSTOFF_REG (pipe, plane,2 ),0x0 ); +} +void intel_color_init (struct drm_crtc *crtc) {struct drm_i915_private *dev_priv =to_i915 (crtc->dev);drivers/gpu/drm/i915/intel_display.c +17
-6@@ -3666,6 +3666,7 @@ u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state,struct drm_i915_private *dev_priv =to_i915 (plane_state->base.plane->dev);const struct drm_framebuffer *fb = plane_state->base.fb; +struct intel_plane *plane =to_intel_plane (plane_state->base.plane);u32 plane_color_ctl =0 ;if (INTEL_GEN (dev_priv) <11 ) {@@ -3676,13 +3677,23 @@ u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state, plane_color_ctl |=glk_plane_color_ctl_alpha (plane_state);if (fb->format->is_yuv) { -if (plane_state->base.color_encoding ==DRM_COLOR_YCBCR_BT709 ) - plane_color_ctl |=PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709 ; -else - plane_color_ctl |=PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709 ; +if (!icl_is_hdr_plane (plane)) { +if (plane_state->base.color_encoding == +DRM_COLOR_YCBCR_BT709 ) + plane_color_ctl |= +PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709 ; +else + plane_color_ctl |= +PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709 ; -if (plane_state->base.color_range ==DRM_COLOR_YCBCR_FULL_RANGE ) - plane_color_ctl |=PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE ; +if (plane_state->base.color_range == +DRM_COLOR_YCBCR_FULL_RANGE ) + plane_color_ctl |= +PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE ; + }else { +icl_program_input_csc_coeff (crtc_state, plane_state); + plane_color_ctl |=PLANE_COLOR_INPUT_CSC_ENABLE ; + } }return plane_color_ctl;drivers/gpu/drm/i915/intel_drv.h +2
-0@@ -2285,6 +2285,8 @@ int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_int intel_color_check (struct drm_crtc *crtc,struct drm_crtc_state *state);void intel_color_set_csc (struct drm_crtc_state *crtc_state);void intel_color_load_luts (struct drm_crtc_state *crtc_state); +void icl_program_input_csc_coeff (const struct intel_crtc_state *crtc_state, +const struct intel_plane_state *plane_state);/* intel_lspcon.c */ bool lspcon_init (struct intel_digital_port *intel_dig_port);Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 9 lines
Matt Roper Graphics Software Engineer IoTG Platform Enabling & Development Intel Corporation (916) 356-2795 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [v4 2/2] drm/i915/icl: Enable Plane Input CSC for YUV to RGB Conversion
Op 26-10-18 om 00:11 schreef Matt Roper:
Quoted 110 lines · Uma Shankar
Quoted 36 lines
Plane input CSC needs to be enabled to convert frambuffers from YUV to RGB. This is needed for bottom 3 planes on ICL, rest of the planes have hardcoded conversion and taken care by the legacy code.
This patch defines the co-efficient values for YUV to RGB conversion in BT709 and BT601 formats. It programs the coefficients and enables the plane input csc unit in hardware.
Note: This is currently untested and floated to get an early feedback on the design and implementation for this feature. In parallel, I will test this on actual ICL hardware and confirm with planar formats.
v2: Addressed Maarten's and Ville's review comments and added the coefficients in a 2D array instead of independent Macros.
v3: Added individual coefficient matrix (9 values) instead of 6 register values as per Maarten's comment. Also addresed a shift issue with B channel coefficient.
v4: Added support for Limited Range Color Handling
Signed-off-by Uma Shankar <[email protected]>--- drivers/gpu/drm/i915/intel_color.c | 79 ++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_display.c | 23 ++++++++--- drivers/gpu/drm/i915/intel_drv.h | 2 + 3 files changed, 98 insertions(+), 6 deletions(-)drivers/gpu/drm/i915/intel_color.c +0
-0@@ -57,6 +57,15 @@#define CSC_RGB_TO_YUV_RV_GV 0xbce89ad8drivers/gpu/drm/i915/intel_color.c line 67
Quoted 10 lines
drivers/gpu/drm/i915/intel_color.c +8
-0#define CSC_RGB_TO_YUV_BV 0x1e080000 +#define ROFF (x) (((x) & 0xffff) << 16) +#define GOFF (x) (((x) & 0xffff) << 0) +#define BOFF (x) (((x) & 0xffff) << 16) + +/* Preoffset values for YUV to RGB Conversion */ +#define PREOFF_YUV_TO_RGB_HI 0x800 +#define PREOFF_YUV_TO_RGB_ME 0xF00 +#define PREOFF_YUV_TO_RGB_LO 0x800Doesn't bit #12 need to be set for each of these values (
0x1800,0x1F00,0x1800)? At least that's what I came up with based on the assumption that input CSC is programmed the same way as pipe CSC, but I might be overlooking or miscalculating something.The pipe CSC page gives an example of converting YUV to RGB with a table that matches your csc matrix below, and a note "Program the CSC Pre-Offsets to -1/2, -1/16, and -1/2."
The bspec indicates the register values here are 13-bits (12:0 in the register dword) and are 2's complement fractions allowing values between -1 and 1 (exclusive). So I take that to mean:
1/2 = 0 1000 0000 0000 -1/2 (one's complement) = 1 0111 1111 1111 -1/2 (two's complement) = 1 1000 0000 0000 = 0x1800and
1/16 = 0 0001 0000 0000 -1/16 (one's complement) = 1 1110 1111 1111 -1/16 (two's complement) = 1 1111 0000 0000 = 0x1F00Anyway, it would probably be good to give a comment indicating what the human-readable values you're using are supposed to be and an indication of how the register is programmed to represent those values.
Matt
Quoted 33 lines
drivers/gpu/drm/i915/intel_color.c +26
-0+/* * Extract the CSC coefficient from a CTM coefficient (in U32.32 fixed point * format). This macro takes the coefficient we want transformed and the @@ -643,6 +652,76 @@ int intel_color_check(struct drm_crtc *crtc,return -EINVAL ; } +void icl_program_input_csc_coeff (const struct intel_crtc_state *crtc_state, +const struct intel_plane_state *plane_state) +{ +struct drm_i915_private *dev_priv = +to_i915 (plane_state->base.plane->dev); +struct intel_crtc *crtc =to_intel_crtc (crtc_state->base.crtc); +enum pipe pipe = crtc->pipe; +struct intel_plane *intel_plane = +to_intel_plane (plane_state->base.plane); +enum plane_id plane = intel_plane->id; + +static const u16 input_csc_matrix[][9 ] = { +/* BT.601 full range YCbCr -> full range RGB */ + [DRM_COLOR_YCBCR_BT601 ] = { +0x7AF8 ,7800 ,0x0 , +0x8B28 ,7800 ,0x9AC0 , +0x0 ,7800 ,0x7DD8 , + }, +/* BT.709 full range YCbCr -> full range RGB */ + [DRM_COLOR_YCBCR_BT709 ] = { +0x7C98 ,7800 ,0x0 , +0x9EF8 ,7800 ,0xABF8 , +0x0 ,0x7800 ,0x7ED8 , + }, + };
Quoted 8 lines
drivers/gpu/drm/i915/intel_color.c int intel_color_check(struct drm_crtc *crtc, · line 687
Quoted 8 lines
drivers/gpu/drm/i915/intel_color.c +8
-0+ +/* Matrix for Limited Range to Full Range Conversion */ +static const u16 input_csc_matrix_lr[][9 ] = { +/* BT.601 Limted range YCbCr -> full range RGB */ + [DRM_COLOR_YCBCR_BT601 ] = { +0x7CC8 ,7950 ,0x0 , +0x8CB8 ,7918 ,0x9C40 , +0x0 ,7918 ,0x7FC8 ,
I think you forgot to add 0x to the second value, resulting in part hex, part numeric.
~Maarten
Quoted 98 lines
Quoted 98 lines
drivers/gpu/drm/i915/intel_color.c +37
-0+ }, +/* BT.709 Limited range YCbCr -> full range RGB */ + [DRM_COLOR_YCBCR_BT709 ] = { +0x7EA8 ,7950 ,0x0 , +0x8888 ,7918 ,0xADA8 , +0x0 ,0x7918 ,0x6870 , + }, + }; +const u16 *csc; + +if (plane_state->base.color_range ==DRM_COLOR_YCBCR_FULL_RANGE ) + csc = input_csc_matrix[plane_state->base.color_encoding]; +else + csc = input_csc_matrix_lr[plane_state->base.color_encoding]; + +I915_WRITE (PLANE_INPUT_CSC_COEFF_REG (pipe, plane,0 ),ROFF (csc[0 ]) | +GOFF (csc[1 ])); +I915_WRITE (PLANE_INPUT_CSC_COEFF_REG (pipe, plane,1 ),BOFF (csc[2 ])); +I915_WRITE (PLANE_INPUT_CSC_COEFF_REG (pipe, plane,2 ),ROFF (csc[3 ]) | +GOFF (csc[4 ])); +I915_WRITE (PLANE_INPUT_CSC_COEFF_REG (pipe, plane,3 ),BOFF (csc[5 ])); +I915_WRITE (PLANE_INPUT_CSC_COEFF_REG (pipe, plane,4 ),ROFF (csc[6 ]) | +GOFF (csc[7 ])); +I915_WRITE (PLANE_INPUT_CSC_COEFF_REG (pipe, plane,5 ),BOFF (csc[8 ])); + +I915_WRITE (PLANE_INPUT_CSC_PREOFF_REG (pipe, plane,0 ), +PREOFF_YUV_TO_RGB_HI ); +I915_WRITE (PLANE_INPUT_CSC_PREOFF_REG (pipe, plane,1 ), +PREOFF_YUV_TO_RGB_ME ); +I915_WRITE (PLANE_INPUT_CSC_PREOFF_REG (pipe, plane,2 ), +PREOFF_YUV_TO_RGB_LO ); + +I915_WRITE (PLANE_INPUT_CSC_POSTOFF_REG (pipe, plane,0 ),0x0 ); +I915_WRITE (PLANE_INPUT_CSC_POSTOFF_REG (pipe, plane,1 ),0x0 ); +I915_WRITE (PLANE_INPUT_CSC_POSTOFF_REG (pipe, plane,2 ),0x0 ); +} +void intel_color_init (struct drm_crtc *crtc) {struct drm_i915_private *dev_priv =to_i915 (crtc->dev);drivers/gpu/drm/i915/intel_display.c +17
-6@@ -3666,6 +3666,7 @@ u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state,struct drm_i915_private *dev_priv =to_i915 (plane_state->base.plane->dev);const struct drm_framebuffer *fb = plane_state->base.fb; +struct intel_plane *plane =to_intel_plane (plane_state->base.plane);u32 plane_color_ctl =0 ;if (INTEL_GEN (dev_priv) <11 ) {@@ -3676,13 +3677,23 @@ u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state, plane_color_ctl |=glk_plane_color_ctl_alpha (plane_state);if (fb->format->is_yuv) { -if (plane_state->base.color_encoding ==DRM_COLOR_YCBCR_BT709 ) - plane_color_ctl |=PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709 ; -else - plane_color_ctl |=PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709 ; +if (!icl_is_hdr_plane (plane)) { +if (plane_state->base.color_encoding == +DRM_COLOR_YCBCR_BT709 ) + plane_color_ctl |= +PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709 ; +else + plane_color_ctl |= +PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709 ; -if (plane_state->base.color_range ==DRM_COLOR_YCBCR_FULL_RANGE ) - plane_color_ctl |=PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE ; +if (plane_state->base.color_range == +DRM_COLOR_YCBCR_FULL_RANGE ) + plane_color_ctl |= +PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE ; + }else { +icl_program_input_csc_coeff (crtc_state, plane_state); + plane_color_ctl |=PLANE_COLOR_INPUT_CSC_ENABLE ; + } }return plane_color_ctl;drivers/gpu/drm/i915/intel_drv.h +2
-0@@ -2285,6 +2285,8 @@ int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_int intel_color_check (struct drm_crtc *crtc,struct drm_crtc_state *state);void intel_color_set_csc (struct drm_crtc_state *crtc_state);void intel_color_load_luts (struct drm_crtc_state *crtc_state); +void icl_program_input_csc_coeff (const struct intel_crtc_state *crtc_state, +const struct intel_plane_state *plane_state);/* intel_lspcon.c */ bool lspcon_init (struct intel_digital_port *intel_dig_port);Signature · 1 line
1.9.1
Quoted 4 lines
Quoted 4 lines
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [v4 2/2] drm/i915/icl: Enable Plane Input CSC for YUV to RGB Conversion
Quoted 44 lines
-----Original Message-----
From: Maarten Lankhorst [mailto:[email protected]]
Sent: Friday, October 26, 2018 2:11 PM
To: Roper, Matthew D <[email protected]>; Shankar, Uma <[email protected]>
Cc: [email protected]; Syrjala, Ville <[email protected]>; Lankhorst, Maarten <[email protected]>
Subject: Re: [Intel-gfx] [v4 2/2] drm/i915/icl: Enable Plane Input CSC for YUV to RGB ConversionOp 26-10-18 om 00:11 schreef Matt Roper:
Quoted 21 lines · Uma Shankar
Quoted 20 lines
Plane input CSC needs to be enabled to convert frambuffers from YUV to RGB. This is needed for bottom 3 planes on ICL, rest of the planes have hardcoded conversion and taken care by the legacy code.
This patch defines the co-efficient values for YUV to RGB conversion in BT709 and BT601 formats. It programs the coefficients and enables the plane input csc unit in hardware.
Note: This is currently untested and floated to get an early feedback on the design and implementation for this feature. In parallel, I will test this on actual ICL hardware and confirm with planar formats.
v2: Addressed Maarten's and Ville's review comments and added the coefficients in a 2D array instead of independent Macros.
v3: Added individual coefficient matrix (9 values) instead of 6 register values as per Maarten's comment. Also addresed a shift issue with B channel coefficient.
Quoted 5 lines
Quoted 5 lines
v4: Added support for Limited Range Color Handling
Signed-off-by Uma Shankar <[email protected]>--- drivers/gpu/drm/i915/intel_color.c | 79++++++++++++++++++++++++++++++++++++
Quoted 4 lines
Quoted 4 lines
drivers/gpu/drm/i915/intel_display.c | 23 ++++++++--- drivers/gpu/drm/i915/intel_drv.h | 2 + 3 files changed, 98 insertions(+), 6 deletions(-)
Quoted 45 lines
Quoted 7 lines
drivers/gpu/drm/i915/intel_color.c line 57
Quoted 7 lines
drivers/gpu/drm/i915/intel_color.c +0
-0@@ -57,6 +57,15 @@#define CSC_RGB_TO_YUV_RV_GV 0xbce89ad8 #define
CSC_RGB_TO_YUV_BVQuoted 37 lines
drivers/gpu/drm/i915/intel_color.c line 67
Quoted 10 lines
0x1e080000drivers/gpu/drm/i915/intel_color.c +8
-0+#define ROFF (x) (((x) & 0xffff) << 16) +#define GOFF (x) (((x) & 0xffff) << 0) +#define BOFF (x) (((x) & 0xffff) << 16) + +/* Preoffset values for YUV to RGB Conversion */ +#define PREOFF_YUV_TO_RGB_HI 0x800 +#define PREOFF_YUV_TO_RGB_ME 0xF00 +#define PREOFF_YUV_TO_RGB_LO 0x800Doesn't bit #12 need to be set for each of these values (
0x1800,0x1F00,0x1800)? At least that's what I came up with based on the assumption that input CSC is programmed the same way as pipe CSC, but I might be overlooking or miscalculating something.The pipe CSC page gives an example of converting YUV to RGB with a table that matches your csc matrix below, and a note "Program the CSC Pre-Offsets to -1/2, -1/16, and -1/2."
The bspec indicates the register values here are 13-bits (12:0 in the register dword) and are 2's complement fractions allowing values between
-1 and 1 (exclusive). So I take that to mean:1/2 = 0 1000 0000 0000 -1/2 (one's complement) = 1 0111 1111 1111 -1/2 (two's complement) = 1 1000 0000 0000 = 0x1800and
1/16 = 0 0001 0000 0000 -1/16 (one's complement) = 1 1110 1111 1111 -1/16 (two's complement) = 1 1111 0000 0000 = 0x1F00Anyway, it would probably be good to give a comment indicating what the human-readable values you're using are supposed to be and an indication of how the register is programmed to represent those values.
Yes, You are right here. Will correct it. Thanks Matt !!
Quoted 36 lines
Quoted 36 lines
Matt
Quoted 34 lines
+
/*
* Extract the CSC coefficient from a CTM coefficient (in U32.32 fixed point
* format). This macro takes the coefficient we want transformed and
the @@ -643,6 +652,76 @@ int intel_color_check(structdrm_crtc*crtc,drivers/gpu/drm/i915/intel_color.c +26
-0return -EINVAL ; } +void icl_program_input_csc_coeff (const struct intel_crtc_state *crtc_state, +const struct intel_plane_state *plane_state) { +struct drm_i915_private *dev_priv = +to_i915 (plane_state->base.plane->dev); +struct intel_crtc *crtc =to_intel_crtc (crtc_state->base.crtc); +enum pipe pipe = crtc->pipe; +struct intel_plane *intel_plane = +to_intel_plane (plane_state->base.plane); +enum plane_id plane = intel_plane->id; + +static const u16 input_csc_matrix[][9 ] = { +/* BT.601 full range YCbCr -> full range RGB */ + [DRM_COLOR_YCBCR_BT601 ] = { +0x7AF8 ,7800 ,0x0 , +0x8B28 ,7800 ,0x9AC0 , +0x0 ,7800 ,0x7DD8 , + }, +/* BT.709 full range YCbCr -> full range RGB */ + [DRM_COLOR_YCBCR_BT709 ] = { +0x7C98 ,7800 ,0x0 , +0x9EF8 ,7800 ,0xABF8 , +0x0 ,0x7800 ,0x7ED8 , + }, + }; + +/* Matrix for Limited Range to Full Range Conversion */
Quoted 8 lines
Quoted 6 lines
drivers/gpu/drm/i915/intel_color.c int intel_color_check(struct drm_crtc *crtc, · line 687
Quoted 6 lines
drivers/gpu/drm/i915/intel_color.c +6
-0+static const u16 input_csc_matrix_lr[][9 ] = { +/* BT.601 Limted range YCbCr -> full range RGB */ + [DRM_COLOR_YCBCR_BT601 ] = { +0x7CC8 ,7950 ,0x0 , +0x8CB8 ,7918 ,0x9C40 , +0x0 ,7918 ,0x7FC8 ,I think you forgot to add 0x to the second value, resulting in part hex, part numeric.
Oh :( , Yes my bad. Will rectify the error. Thanks
Regards,
Uma Shankar
Quoted 118 lines
~Maarten
Quoted 11 lines
drivers/gpu/drm/i915/intel_color.c int intel_color_check(struct drm_crtc *crtc,
Quoted 11 lines
drivers/gpu/drm/i915/intel_color.c +11
-0+ }, +/* BT.709 Limited range YCbCr -> full range RGB */ + [DRM_COLOR_YCBCR_BT709 ] = { +0x7EA8 ,7950 ,0x0 , +0x8888 ,7918 ,0xADA8 , +0x0 ,0x7918 ,0x6870 , + }, + }; +const u16 *csc; + + if (plane_state->base.color_range ==
DRM_COLOR_YCBCR_FULL_RANGE)Quoted 5 lines
drivers/gpu/drm/i915/intel_color.c int intel_color_check(struct drm_crtc *crtc,
Quoted 5 lines
drivers/gpu/drm/i915/intel_color.c +5
-0+ csc = input_csc_matrix[plane_state->base.color_encoding]; + else + csc = input_csc_matrix_lr[plane_state->base.color_encoding]; + + I915_WRITE(PLANE_INPUT_CSC_COEFF_REG(pipe, plane, 0),
ROFF(csc[0])|Quoted 2 lines
drivers/gpu/drm/i915/intel_color.c
Quoted 2 lines
drivers/gpu/drm/i915/intel_color.c +2
-0+ GOFF(csc[1])); + I915_WRITE(PLANE_INPUT_CSC_COEFF_REG(pipe, plane, 1),
BOFF(csc[2]));Quoted 1 line
drivers/gpu/drm/i915/intel_color.c
Quoted 1 line
drivers/gpu/drm/i915/intel_color.c +1
-0+ I915_WRITE(PLANE_INPUT_CSC_COEFF_REG(pipe, plane, 2),
ROFF(csc[3])|Quoted 2 lines
drivers/gpu/drm/i915/intel_color.c
Quoted 2 lines
drivers/gpu/drm/i915/intel_color.c +2
-0+ GOFF(csc[4])); + I915_WRITE(PLANE_INPUT_CSC_COEFF_REG(pipe, plane, 3),
BOFF(csc[5]));Quoted 1 line
drivers/gpu/drm/i915/intel_color.c
Quoted 1 line
drivers/gpu/drm/i915/intel_color.c +1
-0+ I915_WRITE(PLANE_INPUT_CSC_COEFF_REG(pipe, plane, 4),
ROFF(csc[6])|Quoted 15 lines
Quoted 15 lines
drivers/gpu/drm/i915/intel_color.c +15
-0+ GOFF(csc[7])); +I915_WRITE (PLANE_INPUT_CSC_COEFF_REG (pipe, plane,5 ), +BOFF (csc[8 ])); + +I915_WRITE (PLANE_INPUT_CSC_PREOFF_REG (pipe, plane,0 ), +PREOFF_YUV_TO_RGB_HI ); +I915_WRITE (PLANE_INPUT_CSC_PREOFF_REG (pipe, plane,1 ), +PREOFF_YUV_TO_RGB_ME ); +I915_WRITE (PLANE_INPUT_CSC_PREOFF_REG (pipe, plane,2 ), +PREOFF_YUV_TO_RGB_LO ); + +I915_WRITE (PLANE_INPUT_CSC_POSTOFF_REG (pipe, plane,0 ),0x0 ); +I915_WRITE (PLANE_INPUT_CSC_POSTOFF_REG (pipe, plane,1 ),0x0 ); +I915_WRITE (PLANE_INPUT_CSC_POSTOFF_REG (pipe, plane,2 ),0x0 ); } +Quoted 8 lines
drivers/gpu/drm/i915/intel_display.c u32 glk_plane_color_ctl(const struct
Quoted 8 lines
void
intel_color_init(struct drm_crtc *crtc){
structdrm_i915_private*dev_priv=to_i915(crtc->dev); diff --gita/drivers/gpu/drm/i915/intel_display.cb/drivers/gpu/drm/i915/intel_display.c
index fe045ab..d16a064 100644drivers/gpu/drm/i915/intel_display.c +0
-0@@ -3666,6 +3666,7 @@ u32 glk_plane_color_ctl(const struct
intel_crtc_state*crtc_state,Quoted 9 lines
drivers/gpu/drm/i915/intel_display.c u32 glk_plane_color_ctl(const struct
Quoted 9 lines
drivers/gpu/drm/i915/intel_display.c +2
-0struct drm_i915_private *dev_priv =to_i915 (plane_state->base.plane->dev);const struct drm_framebuffer *fb = plane_state->base.fb; +struct intel_plane *plane = +to_intel_plane (plane_state->base.plane);u32 plane_color_ctl =0 ;if (INTEL_GEN (dev_priv) <11 ) {@@ -3676,13 +3677,23 @@ u32 glk_plane_color_ctl(const struct
intel_crtc_state*crtc_state,Quoted 4 lines
drivers/gpu/drm/i915/intel_display.c u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state,
Quoted 4 lines
drivers/gpu/drm/i915/intel_display.c +0
-1plane_color_ctl |=glk_plane_color_ctl_alpha (plane_state);if (fb->format->is_yuv) { - if (plane_state->base.color_encoding ==
DRM_COLOR_YCBCR_BT709)Quoted 1 line
drivers/gpu/drm/i915/intel_display.c u32 glk_plane_color_ctl(const struct · line 3680
Quoted 1 line
drivers/gpu/drm/i915/intel_display.c +0
-1- plane_color_ctl |=
PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709;Quoted 2 lines
drivers/gpu/drm/i915/intel_display.c u32 glk_plane_color_ctl(const struct · line 3682
Quoted 2 lines
drivers/gpu/drm/i915/intel_display.c +0
-2-else - plane_color_ctl |=
PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709;Quoted 5 lines
drivers/gpu/drm/i915/intel_display.c u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state,
Quoted 5 lines
drivers/gpu/drm/i915/intel_display.c +5
-0+if (!icl_is_hdr_plane (plane)) { +if (plane_state->base.color_encoding == +DRM_COLOR_YCBCR_BT709 ) + plane_color_ctl |= +PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709;Quoted 3 lines
drivers/gpu/drm/i915/intel_display.c u32 glk_plane_color_ctl(const struct · line 3687
Quoted 3 lines
drivers/gpu/drm/i915/intel_display.c +3
-0+else + plane_color_ctl |= +PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709;Quoted 2 lines
drivers/gpu/drm/i915/intel_display.c u32 glk_plane_color_ctl(const struct · line 3683
Quoted 2 lines
drivers/gpu/drm/i915/intel_display.c +0
-1- if (plane_state->base.color_range ==
DRM_COLOR_YCBCR_FULL_RANGE)Quoted 1 line
drivers/gpu/drm/i915/intel_display.c u32 glk_plane_color_ctl(const struct · line 3684
Quoted 1 line
drivers/gpu/drm/i915/intel_display.c +0
-1- plane_color_ctl |=
PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE;Quoted 4 lines
drivers/gpu/drm/i915/intel_display.c u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state,
Quoted 4 lines
drivers/gpu/drm/i915/intel_display.c +4
-0+if (plane_state->base.color_range == +DRM_COLOR_YCBCR_FULL_RANGE ) + plane_color_ctl |= +PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE;Quoted 25 lines
Quoted 25 lines
drivers/gpu/drm/i915/intel_display.c +4
-0+ }else { +icl_program_input_csc_coeff (crtc_state, plane_state); + plane_color_ctl |=PLANE_COLOR_INPUT_CSC_ENABLE ; + } }return plane_color_ctl;drivers/gpu/drm/i915/intel_drv.h +0
-0@@ -2285,6 +2285,8 @@ int intel_plane_atomic_check_with_state(conststruct
intel_crtc_state*old_crtc_intintel_color_check(struct drm_crtc *crtc, struct drm_crtc_state *state); voidintel_color_set_csc(struct drm_crtc_state *crtc_state); voidintel_color_load_luts(struct drm_crtc_state *crtc_state);drivers/gpu/drm/i915/intel_drv.h +2
-1+void icl_program_input_csc_coeff (const struct intel_crtc_state *crtc_state, +const struct intel_plane_state *plane_state);/* intel_lspcon.c */ bool lspcon_init (struct intel_digital_port *intel_dig_port); --1.9.1
Quoted 5 lines
Quoted 4 lines
Quoted 4 lines
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for Enable Plane Input CSC for ICL (rev3)
In reply to Uma Shankar== Series Details ==
== Series Details ==
Series: Enable Plane Input CSC for ICL (rev3)
URL : https://patchwork.freedesktop.org/series/51463/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip 99febf0a6212 drm/i915/icl: Define Plane Input CSC Coefficient Registers -:54: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'pipe' - possible side-effects? #54: FILE: drivers/gpu/drm/i915/i915_reg.h:6603: +#define PLANE_INPUT_CSC_COEFF_REG(pipe, plane, index) \ + _MMIO_PLANE(plane, _PLANE_INPUT_CSC_RY_GY_1(pipe) + (index) * 4, \ + _PLANE_INPUT_CSC_RY_GY_2(pipe) + (index) * 4)
-:54: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'index' - possible side-effects? #54: FILE: drivers/gpu/drm/i915/i915_reg.h:6603:
+#define PLANE_INPUT_CSC_COEFF_REG(pipe, plane, index) \
+ _MMIO_PLANE(plane, _PLANE_INPUT_CSC_RY_GY_1(pipe) + (index) * 4, \
+ _PLANE_INPUT_CSC_RY_GY_2(pipe) + (index) * 4)
-:70: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'pipe' - possible side-effects? #70: FILE: drivers/gpu/drm/i915/i915_reg.h:6619:
+#define PLANE_INPUT_CSC_PREOFF_REG(pipe, plane, index) \
+ _MMIO_PLANE(plane, _PLANE_INPUT_CSC_PREOFF_HI_1(pipe) + (index) * 4, \
+ _PLANE_INPUT_CSC_PREOFF_HI_2(pipe) + (index) * 4)
-:70: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'index' - possible side-effects? #70: FILE: drivers/gpu/drm/i915/i915_reg.h:6619:
+#define PLANE_INPUT_CSC_PREOFF_REG(pipe, plane, index) \
+ _MMIO_PLANE(plane, _PLANE_INPUT_CSC_PREOFF_HI_1(pipe) + (index) * 4, \
+ _PLANE_INPUT_CSC_PREOFF_HI_2(pipe) + (index) * 4)
-:86: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'pipe' - possible side-effects? #86: FILE: drivers/gpu/drm/i915/i915_reg.h:6635:
+#define PLANE_INPUT_CSC_POSTOFF_REG(pipe, plane, index) \
+ _MMIO_PLANE(plane, _PLANE_INPUT_CSC_POSTOFF_HI_1(pipe) + (index) * 4, \
+ _PLANE_INPUT_CSC_POSTOFF_HI_2(pipe) + (index) * 4)
-:86: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'index' - possible side-effects? #86: FILE: drivers/gpu/drm/i915/i915_reg.h:6635:
+#define PLANE_INPUT_CSC_POSTOFF_REG(pipe, plane, index) \
+ _MMIO_PLANE(plane, _PLANE_INPUT_CSC_POSTOFF_HI_1(pipe) + (index) * 4, \
+ _PLANE_INPUT_CSC_POSTOFF_HI_2(pipe) + (index) * 4)
total: 0 errors, 0 warnings, 6 checks, 62 lines checked ca48ad67d283 drm/i915/icl: Enable Plane Input CSC for YUV to RGB Conversion
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.SPARSE: warning for Enable Plane Input CSC for ICL (rev3)
In reply to Uma Shankar== Series Details ==
== Series Details ==
Series: Enable Plane Input CSC for ICL (rev3)
URL : https://patchwork.freedesktop.org/series/51463/
State : warning
== Summary ==
$ dim sparse origin/drm-tip Sparse version: v0.5.2 Commit: drm/i915/icl: Define Plane Input CSC Coefficient Registers Okay!
Commit: drm/i915/icl: Enable Plane Input CSC for YUV to RGB Conversion +drivers/gpu/drm/i915/intel_color.c:105:33: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_color.c:105:33: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_color.c:105:33: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_color.c:105:33: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_color.c:105:33: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_color.c:105:33: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_color.c:105:33: warning: expression using sizeof(void) -drivers/gpu/drm/i915/intel_color.c:105:33: warning: expression using sizeof(void) -drivers/gpu/drm/i915/intel_color.c:105:33: warning: expression using sizeof(void) -drivers/gpu/drm/i915/intel_color.c:105:33: warning: expression using sizeof(void) -drivers/gpu/drm/i915/intel_color.c:105:33: warning: expression using sizeof(void) -drivers/gpu/drm/i915/intel_color.c:105:33: warning: expression using sizeof(void) -drivers/gpu/drm/i915/intel_color.c:105:33: warning: expression using sizeof(void) -drivers/gpu/drm/i915/intel_color.c:105:33: warning: expression using sizeof(void)
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for Enable Plane Input CSC for ICL (rev3)
In reply to Uma Shankar== Series Details ==
== Series Details ==
Series: Enable Plane Input CSC for ICL (rev3)
URL : https://patchwork.freedesktop.org/series/51463/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_5038 -> Patchwork_10587 =
== Summary - SUCCESS ==
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/51463/revisions/3/mbox/
== Known issues ==
Here are the changes found in Patchwork_10587 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@kms_flip@basic-flip-vs-modeset:
fi-glk-j4005: PASS -> DMESG-WARN (fdo#106000)
igt@kms_flip@basic-plain-flip:
fi-glk-j4005: PASS -> DMESG-WARN (fdo#106097)
igt@kms_frontbuffer_tracking@basic:
fi-byt-clapper: PASS -> FAIL (fdo#103167)
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
fi-skl-6700k2: PASS -> INCOMPLETE (fdo#104108, k.org#199541, fdo#105524)
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c:
fi-icl-u: NOTRUN -> FAIL (fdo#103375) +1
==== Possible fixes ====
igt@kms_frontbuffer_tracking@basic:
fi-hsw-peppy: DMESG-WARN (fdo#102614) -> PASS
igt@kms_pipe_crc_basic@nonblocking-crc-pipe-a:
fi-byt-clapper: FAIL (fdo#107362) -> PASS
igt@kms_pipe_crc_basic@read-crc-pipe-c-frame-sequence:
fi-glk-j4005: DMESG-WARN (fdo#106000) -> PASS
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
fi-byt-clapper: FAIL (fdo#107362, fdo#103191) -> PASS fdo#102614 https://bugs.freedesktop.org/show_bug.cgi?id=102614
fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167
fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
fdo#103375 https://bugs.freedesktop.org/show_bug.cgi?id=103375
fdo#104108 https://bugs.freedesktop.org/show_bug.cgi?id=104108
fdo#105524 https://bugs.freedesktop.org/show_bug.cgi?id=105524
fdo#106000 https://bugs.freedesktop.org/show_bug.cgi?id=106000
fdo#106097 https://bugs.freedesktop.org/show_bug.cgi?id=106097
fdo#107362 https://bugs.freedesktop.org/show_bug.cgi?id=107362
k.org#199541 https://bugzilla.kernel.org/show_bug.cgi?id=199541
== Participating hosts (46 -> 44) ==
Additional (1): fi-icl-u
Missing (3): fi-ilk-m540 fi-byt-squawks fi-bsw-cyan
== Build changes ==
* Linux: CI_DRM_5038 -> Patchwork_10587
CI_DRM_5038: 96ecfb04d5acfcc565068c09afd6d0d713b2ddef @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4695: 81b66cf2806d6a8e9516580fb31879677487d32b @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_10587: ca48ad67d283f6b861e6acfbe8ba7b6cfba5ebae @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
ca48ad67d283 drm/i915/icl: Enable Plane Input CSC for YUV to RGB Conversion 99febf0a6212 drm/i915/icl: Define Plane Input CSC Coefficient Registers
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10587/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.IGT: failure for Enable Plane Input CSC for ICL (rev3)
In reply to Uma Shankar== Series Details ==
== Series Details ==
Series: Enable Plane Input CSC for ICL (rev3)
URL : https://patchwork.freedesktop.org/series/51463/
State : failure
== Summary ==
= CI Bug Log - changes from CI_DRM_5038_full -> Patchwork_10587_full =
== Summary - FAILURE ==
Serious unknown changes coming with Patchwork_10587_full absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_10587_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_10587_full:
=== IGT changes ===
==== Possible regressions ====
igt@gem_busy@close-race:
shard-apl: PASS -> DMESG-FAIL
==== Warnings ====
igt@pm_rc6_residency@rc6-accuracy:
shard-kbl: PASS -> SKIP
shard-snb: SKIP -> PASS== Known issues ==
Here are the changes found in Patchwork_10587_full that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@drv_suspend@shrink:
shard-snb: PASS -> INCOMPLETE (fdo#105411, fdo#106886)
igt@gem_exec_schedule@pi-ringfull-bsd:
shard-skl: NOTRUN -> FAIL (fdo#103158)
igt@kms_busy@extended-pageflip-modeset-hang-oldfb-render-c:
shard-skl: NOTRUN -> DMESG-WARN (fdo#107956) +2
igt@kms_color@pipe-a-ctm-max:
shard-apl: PASS -> FAIL (fdo#108147)
igt@kms_cursor_crc@cursor-128x128-random:
shard-apl: PASS -> FAIL (fdo#103232) +2
igt@kms_cursor_crc@cursor-128x128-suspend:
shard-apl: PASS -> FAIL (fdo#103232, fdo#103191)
igt@kms_cursor_crc@cursor-256x256-onscreen:
shard-skl: NOTRUN -> FAIL (fdo#103232)
igt@kms_cursor_crc@cursor-64x64-dpms:
shard-glk: PASS -> FAIL (fdo#103232) +1
igt@kms_fbcon_fbt@psr-suspend:
shard-skl: NOTRUN -> FAIL (fdo#107882) +1
igt@kms_flip@2x-flip-vs-expired-vblank:
shard-glk: PASS -> FAIL (fdo#105363)
igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt:
shard-apl: PASS -> FAIL (fdo#103167)
igt@kms_frontbuffer_tracking@fbc-2p-primscrn-cur-indfb-draw-pwrite:
shard-glk: PASS -> FAIL (fdo#103167) +1
igt@kms_frontbuffer_tracking@fbcpsr-stridechange:
shard-skl: NOTRUN -> FAIL (fdo#105683)
igt@kms_plane@plane-position-covered-pipe-a-planes:
shard-apl: PASS -> FAIL (fdo#103166) +1
igt@kms_plane_alpha_blend@pipe-b-alpha-basic:
shard-skl: NOTRUN -> FAIL (fdo#107815, fdo#108145) +1
igt@kms_plane_alpha_blend@pipe-c-alpha-transparant-fb:
shard-skl: NOTRUN -> FAIL (fdo#108145) +3
igt@kms_plane_alpha_blend@pipe-c-constant-alpha-max:
shard-glk: PASS -> FAIL (fdo#108145) +1
igt@kms_setmode@basic:
shard-apl: PASS -> FAIL (fdo#99912)
shard-kbl: PASS -> FAIL (fdo#99912)
==== Possible fixes ====
igt@gem_busy@close-race:
shard-glk: DMESG-FAIL -> PASS
igt@kms_cursor_crc@cursor-128x128-onscreen:
shard-glk: FAIL (fdo#103232) -> PASS +1
igt@kms_cursor_crc@cursor-128x128-sliding:
shard-apl: FAIL (fdo#103232) -> PASS +1
igt@kms_cursor_crc@cursor-256x256-dpms:
shard-skl: FAIL (fdo#103232) -> PASS
igt@kms_cursor_crc@cursor-64x64-suspend:
shard-skl: INCOMPLETE (fdo#104108) -> PASS
igt@kms_draw_crc@fill-fb:
shard-skl: FAIL (fdo#103184) -> PASS
igt@kms_frontbuffer_tracking@fbc-2p-primscrn-spr-indfb-onoff:
shard-glk: FAIL (fdo#103167) -> PASS +1
igt@kms_frontbuffer_tracking@fbc-2p-rte:
shard-glk: FAIL (fdo#103167, fdo#105682) -> PASS
igt@kms_plane_alpha_blend@pipe-a-coverage-7efc:
shard-skl: FAIL (fdo#107815, fdo#108145) -> PASS
igt@kms_plane_alpha_blend@pipe-c-alpha-opaque-fb:
shard-glk: FAIL (fdo#108145) -> PASS
igt@kms_plane_multiple@atomic-pipe-a-tiling-x:
shard-glk: FAIL (fdo#103166) -> PASS
igt@kms_plane_multiple@atomic-pipe-c-tiling-yf:
shard-apl: FAIL (fdo#103166) -> PASS +1
igt@perf@polling:
shard-hsw: FAIL (fdo#102252) -> PASS
==== Warnings ====
igt@kms_cursor_crc@cursor-64x64-sliding:
shard-apl: FAIL (fdo#103232) -> DMESG-WARN (fdo#108549)
igt@kms_frontbuffer_tracking@fbc-1p-rte:
shard-apl: DMESG-FAIL (fdo#103167, fdo#108549) -> DMESG-WARN (fdo#108549) fdo#102252 https://bugs.freedesktop.org/show_bug.cgi?id=102252
fdo#103158 https://bugs.freedesktop.org/show_bug.cgi?id=103158
fdo#103166 https://bugs.freedesktop.org/show_bug.cgi?id=103166
fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167
fdo#103184 https://bugs.freedesktop.org/show_bug.cgi?id=103184
fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
fdo#103232 https://bugs.freedesktop.org/show_bug.cgi?id=103232
fdo#104108 https://bugs.freedesktop.org/show_bug.cgi?id=104108
fdo#105363 https://bugs.freedesktop.org/show_bug.cgi?id=105363
fdo#105411 https://bugs.freedesktop.org/show_bug.cgi?id=105411
fdo#105682 https://bugs.freedesktop.org/show_bug.cgi?id=105682
fdo#105683 https://bugs.freedesktop.org/show_bug.cgi?id=105683
fdo#106886 https://bugs.freedesktop.org/show_bug.cgi?id=106886
fdo#107815 https://bugs.freedesktop.org/show_bug.cgi?id=107815
fdo#107882 https://bugs.freedesktop.org/show_bug.cgi?id=107882
fdo#107956 https://bugs.freedesktop.org/show_bug.cgi?id=107956
fdo#108145 https://bugs.freedesktop.org/show_bug.cgi?id=108145
fdo#108147 https://bugs.freedesktop.org/show_bug.cgi?id=108147
fdo#108549 https://bugs.freedesktop.org/show_bug.cgi?id=108549
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
== Participating hosts (6 -> 6) ==
No changes in participating hosts
== Build changes ==
* Linux: CI_DRM_5038 -> Patchwork_10587
CI_DRM_5038: 96ecfb04d5acfcc565068c09afd6d0d713b2ddef @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4695: 81b66cf2806d6a8e9516580fb31879677487d32b @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_10587: ca48ad67d283f6b861e6acfbe8ba7b6cfba5ebae @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10587/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx