Skip to contentSkip to conversation

mx8mq_evk: README: Delete file introduced by mistake

PATCH New Fabio Estevam 2 participants 2 messages Oct 26, 2018

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mx8mq_evk: README: Delete file introduced by mistake

board/freescale/mx8mq_evk/README has been introduced by mistake in commit d0dd73974c61 ("imx: add i.MX8QXP MEK board support")

Remove it for now as this should be introduced when mx8mq_evk support is in place.

---
 board/freescale/mx8mq_evk/README | 81 ----------------------------------------
 1 file changed, 81 deletions(-)
 delete mode 100644 board/freescale/mx8mq_evk/README
board/freescale/mx8mq_evk/README deleted +0 -81
deleted file mode 100644
index cd7e67e..0000000
@@ -1,81 +0,0 @@
-U-Boot for the NXP i.MX8MQ EVK board
-
-Quick Start
-===========
-
-- Build U-Boot
-- Build the ARM Trusted firmware binary
-- Get DDR firmware and mkimage tool
-- Generate flash.bin using imx-mkimage
-- Flash the binary into the SD card
-- Boot
-
-Build U-Boot
-============
-
-$ make mx8mq_evk_defconfig
-$ make
-
-Get and Build the ARM Trusted firmware
-======================================
-
-$ git clone https://source.codeaurora.org/external/imx/imx-atf
-$ cd imx-atf/
-$ git checkout origin/imx_4.9.51_imx8m_beta
-$ make PLAT=imx8mq bl31
-
-Get the DDR firmware and mkimage tool
-==============================
-
-$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.2.bin
-$ chmod +x firmware-imx-7.2.bin
-$ ./firmware-imx-7.2.bin
-
-Download the imx-mkimage tool:
-
-$ git clone https://source.codeaurora.org/external/imx/imx-mkimage/
-$ cd imx-mkimage/
-$ git checkout origin/imx_4.9.51_imx8m_beta
-
-
-Generate flash.bin using imx-mkimage
-====================================
-
-Copy the following binaries to imx-mkimage/iMX8M folder:
-
-$ cp imx-atf/build/imx8mq/release/bl31.bin imx-mkimage/iMX8M/
-$ cp u-boot/u-boot-nodtb.bin imx-mkimage/iMX8M/
-$ cp u-boot/spl/u-boot-spl.bin imx-mkimage/iMX8M/
-$ cp u-boot/arch/arm/dts/fsl-imx8mq-evk.dtb imx-mkimage/iMX8M/
-
-Copy the following firmwares to imx-mkimage/iMX8 folder :
-
-$ cp firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem.bin imx-mkimage/iMX8M/
-$ cp firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem.bin imx-mkimage/iMX8M/
-$ cp firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem.bin imx-mkimage/iMX8M/
-$ cp firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem.bin imx-mkimage/iMX8M/
-
-If you want to run with HDMI, copy signed_hdmi_imx8m.bin to imx-mkimage/iMX8M.
-
-Before generating the flash.bin, transfer the mkimage generated by U-Boot to iMX8M folder:
-
-$ cp u-boot/tools/mkimage imx-mkimage/iMX8M/
-$ mv imx-mkimage/iMX8M/mkimage imx-mkimage/iMX8M/mkimage_uboot
-
-$ cd imx-mkimage/
-$ make SOC=iMX8M flash_spl_uboot
-
-Or for using HDMI:
-
-$ make SOC=iMX8M flash_hdmi_spl_uboot
-
-Flash the binary into the SD card
-=================================
-
-Burn the flash.bin binary to SD card offset 33KB:
-
-$ sudo dd if=iMX8M/flash.bin of=/dev/sd[x] bs=1024 seek=33
-
-Boot
-====
-Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD.
Signature · 1 line
2.7.4
#1 lore raw

PATCH 1/1 mx8mq_evk: README: Delete file introduced by mistake

Quoted 10 lines

-----Original Message-----
From: Fabio Estevam [mailto:festevam at gmail.com]
Sent: 2018年10月26日 8:23
To: sbabic at denx.de
Cc: u-boot at lists.denx.de; tharvey at gateworks.com; Peng Fan <[email protected]>; Fabio Estevam <[email protected]>
Subject: [PATCH] mx8mq_evk: README: Delete file introduced by mistake

Quoted 8 lines

board/freescale/mx8mq_evk/README has been introduced by mistake in commit d0dd73974c61 ("imx: add i.MX8QXP MEK board support")

Remove it for now as this should be introduced when mx8mq_evk support is in place.

Thanks,

Quoted 118 lines
---
 board/freescale/mx8mq_evk/README | 81 ----------------------------------------
 1 file changed, 81 deletions(-)
 delete mode 100644 board/freescale/mx8mq_evk/README
board/freescale/mx8mq_evk/README deleted +0 -22
deleted file mode 100644
index cd7e67e..0000000
@@ -1,81 +0,0 @@
-U-Boot for the NXP i.MX8MQ EVK board
-
-Quick Start
-===========
-
-- Build U-Boot
-- Build the ARM Trusted firmware binary
-- Get DDR firmware and mkimage tool
-- Generate flash.bin using imx-mkimage
-- Flash the binary into the SD card
-- Boot
-
-Build U-Boot
-============
-
-$ make mx8mq_evk_defconfig
-$ make
-
-Get and Build the ARM Trusted firmware
-======================================
-
-$ git clone

https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fsource.
codeaurora.org%2Fexternal%2Fimx%2Fimx-atf&amp;data=02%7C01%7Cpeng.f an%40nxp.com%7C7b3f29a20357475a4b2108d63ad9451a%7C686ea1d3bc2b4 c6fa92cd99c5c301635%7C0%7C0%7C636761102173985023&amp;sdata=6xDil qlAeAHIjR%2FDbHTzdpPLBW5fhcwWjeUGOlkjjOs%3D&amp;reserved=0 -$ cd imx-atf/
-$ git checkout origin/imx_4.9.51_imx8m_beta -$ make PLAT=imx8mq bl31

board/freescale/mx8mq_evk/README deleted +0 -5
-
-Get the DDR firmware and mkimage tool
-==============================
-
-$ wget

https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.n
xp.com%2Flgfiles%2FNMG%2FMAD%2FYOCTO%2Ffirmware-imx-7.2.bin&amp; data=02%7C01%7Cpeng.fan%40nxp.com%7C7b3f29a20357475a4b2108d63ad9 451a%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6367611021739 85023&amp;sdata=%2BuPPIGvFH7VoCGZL4Hw6%2B0KxuxLsH5udefKwWE%2F vJZc%3D&amp;reserved=0
-$ chmod +x firmware-imx-7.2.bin
-$ ./firmware-imx-7.2.bin

board/freescale/mx8mq_evk/README deleted +0 -4
-
-Download the imx-mkimage tool:
-
-$ git clone

https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fsource.
codeaurora.org%2Fexternal%2Fimx%2Fimx-mkimage%2F&amp;data=02%7C01 %7Cpeng.fan%40nxp.com%7C7b3f29a20357475a4b2108d63ad9451a%7C686ea 1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C636761102173995031&amp;sd ata=7%2Fgnl%2B6gT5uHlzz5Xt8nCprpna%2FVjnPhw62x4yEICKE%3D&amp;rese rved=0
-$ cd imx-mkimage/
-$ git checkout origin/imx_4.9.51_imx8m_beta

board/freescale/mx8mq_evk/README deleted +0 -8
-
-
-Generate flash.bin using imx-mkimage
-====================================
-
-Copy the following binaries to imx-mkimage/iMX8M folder:
-
-$ cp imx-atf/build/imx8mq/release/bl31.bin imx-mkimage/iMX8M/ -$ cp

u-boot/u-boot-nodtb.bin imx-mkimage/iMX8M/ -$ cp u-boot/spl/u-boot-spl.bin imx-mkimage/iMX8M/ -$ cp u-boot/arch/arm/dts/fsl-imx8mq-evk.dtb imx-mkimage/iMX8M/

board/freescale/mx8mq_evk/README deleted +0 -4
-
-Copy the following firmwares to imx-mkimage/iMX8 folder :
-
-$ cp

firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem.bin imx-mkimage/iMX8M/ -$ cp firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem.bin imx-mkimage/iMX8M/ -$ cp firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem.bin imx-mkimage/iMX8M/ -$ cp firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem.bin imx-mkimage/iMX8M/

board/freescale/mx8mq_evk/README deleted +0 -2
-
-If you want to run with HDMI, copy signed_hdmi_imx8m.bin to

imx-mkimage/iMX8M.

board/freescale/mx8mq_evk/README deleted +0 -2
-
-Before generating the flash.bin, transfer the mkimage generated by U-Boot to

iMX8M folder:
-
-$ cp u-boot/tools/mkimage imx-mkimage/iMX8M/ -$ mv imx-mkimage/iMX8M/mkimage imx-mkimage/iMX8M/mkimage_uboot

board/freescale/mx8mq_evk/README deleted +0 -19
-
-$ cd imx-mkimage/
-$ make SOC=iMX8M flash_spl_uboot
-
-Or for using HDMI:
-
-$ make SOC=iMX8M flash_hdmi_spl_uboot
-
-Flash the binary into the SD card
-=================================
-
-Burn the flash.bin binary to SD card offset 33KB:
-
-$ sudo dd if=iMX8M/flash.bin of=/dev/sd[x] bs=1024 seek=33
-
-Boot
-====
-Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD.
--

2.7.4