FAILED: patch "[PATCH] ARM: dts: exynos: Disable pull control for MAX8997 interrupts" failed to apply to 4.4-stable tree

The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From: Marek Szyprowski <[email protected]>
Date: Wed, 5 Sep 2018 12:02:15 +0200
Subject: [PATCH] ARM: dts: exynos: Disable pull control for MAX8997 interrupts
on Origen

PMIC_IRQB and PMIC_KEYINB lines on Exynos4210-based Origen board have external pull-up resistors, so disable any pull control for those lines in respective pin controller node. This fixes support for MAX8997 interrupts and enables operation of wakeup from MAX8997 RTC alarm.

index 2ab99f9f3d0a..dd9ec05eb0f7 100644
@@ -151,6 +151,8 @@
 		reg = <0x66>;
 		interrupt-parent = <&gpx0>;
 		interrupts = <4 IRQ_TYPE_NONE>, <3 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max8997_irq>;
 
 		max8997,pmic-buck1-dvs-voltage = <1350000>;
 		max8997,pmic-buck2-dvs-voltage = <1100000>;

@@ -288,6 +290,13 @@
 	};
 };
 
+&pinctrl_1 {
+	max8997_irq: max8997-irq {
+		samsung,pins = "gpx0-3", "gpx0-4";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
 &sdhci_0 {
 	bus-width = <4>;
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;