sim800: merge sim800 and sim900 documentation.
PATCH 2/3 sim800: merge sim800 and sim900 documentation.
--- doc/sim900-modem.txt | 12 ------------ doc/simcom-modem.txt | 22 ++++++++++++++++++++++ 2 files changed, 22 insertions(+), 12 deletions(-) delete mode 100644 doc/sim900-modem.txt create mode 100644 doc/simcom-modem.txt
doc/sim900-modem.txt deleted +0 -12
@@ -1,12 +0,0 @@ -SIM900 modem usage -=================== - -To enable SIM900 module support you need to put the following -udev rule into appropriate file in /{etc,lib}/udev/rules.d: - -KERNEL=="gsmtty3", ENV{OFONO_DRIVER}="sim900" - -On the i-Tetra tracking device, the SIM900 is accessed -via N_GSM mux device. We use ofono as SMS message -service and incoming voice calls service, so we -use /dev/gsmtty1 provided by N_GSM mux.
doc/simcom-modem.txt new file +22 -0
@@ -0,0 +1,22 @@ +SIM900 modem usage +=================== + +To enable SIM900 module support you need to put the following +udev rule into appropriate file in /{etc,lib}/udev/rules.d: + +KERNEL=="gsmtty3", ENV{OFONO_DRIVER}="sim900" + +On the i-Tetra tracking device, the SIM900 is accessed +via N_GSM mux device. We use ofono as SMS message +service and incoming voice calls service, so we +use /dev/gsmtty1 provided by N_GSM mux. + +SIM800 modem usage +================== + +When using sim800 modem, the udev rule is the same as the +sim900 rule : + +KERNEL=="ttyS3", ENV{OFONO_DRIVER}="sim900" + +Because the SIM800 and SIM900 code are the merged into one driver.
Signature · 1 line
2.7.4
Denis Kenzior
AppliedHi Clement,
Quoted 6 lines · Clement Viel
--- doc/sim900-modem.txt | 12 ------------ doc/simcom-modem.txt | 22 ++++++++++++++++++++++ 2 files changed, 22 insertions(+), 12 deletions(-)delete mode 100644
doc/sim900-modem.txt
create mode 100644doc/simcom-modem.txt
Applied, thanks.
Regards,
-Denis