riscv: Adding RISC-V CPU and timer driver
Subsystems (2)
v4 cover riscv: Adding RISC-V CPU and timer driver
This adds DM drivers to support RISC-V CPU and timer, plus some bug fixes.
This series is available at u-boot-x86/riscv-working for testing.
Changes in v4:
- print warnings for S-mode without CONFIG_CPU
Changes in v3:
- remove 'select RISCV_CLINT' in Kconfig
- do not mention the spec version number v1.10
- adjust riscv_get_time() API signature to have a return value
- check return value of syscon_get_first_range()
- probe cpus in the pre-relocation stage too
- new patch to remove non-DM version of print_cpuinfo()
- add sedeleg (0x102) and sideleg (0x103) CSRs
- new patch to update supports_extension() to use desc from cpu driver
- only initialize mcounteren CSR for S-mode
- only touch satp in M-mode U-Boot
- move the implementation to arch_cpu_init_dm()
- new patch to save boot hart id to the global data
- new patch to change to use boot_hart from global data
- new patch to remove ae350.dts
Changes in v2:
- Use 'Hz' instead of 'HZ'
- add DM_FLAG_PRE_RELOC flag to the simple-bus driver
- pass NULL as the timer device to device_bind_with_driver_data()
- remove the probe to syscon driver in the timer probe, to make the driver generic, and rely on platform codes to provide the API riscv_get_time().
- incorporated and reworked Anup's S-mode timer patch
@ http://patchwork.ozlabs.org/patch/1006663/
- rename the driver name to sifive_clint
- save the clint base address to arch specific global data to support pre-relocation stage
- remove the probe routine
- add riscv_clear_ipi() API
- incorporated and reworked Anup's S-mode timer patch
@ http://patchwork.ozlabs.org/patch/1006663/
- add CMD_CPU as well
- move to arch/riscv/cpu/cpu.c
- new patch to add indirect stringification to csr_xxx ops
- use csr_set() to set MSTATUS_FS
- only enabling the cycle, time, and instret counters
- change to use satp
- rebase on u-boot/master
- drop the patch "riscv: Pass correct exception code to _exit_trap()"
- drop the patch "riscv: Refactor handle_trap() a little for future extension"
- drop the patch "riscv: Allow U-Boot to run on hart 0 only", and leave the SMP support to Lukas's future patch series
Anup Patel (2):
riscv: Introduce a Kconfig option for machine mode
riscv: Implement riscv_get_time() API using rdtime instruction
Bin Meng (22):
dm: cpu: Add timebase frequency to the platdata
riscv: qemu: Create a simple-bus driver for the soc node
cpu: Add a RISC-V CPU driver
timer: Add generic driver for RISC-V privileged architecture defined
timer
riscv: ax25: Hide the ax25-specific Kconfig option
riscv: Add a SYSCON driver for SiFive's Core Local Interruptor
riscv: qemu: Add platform-specific Kconfig options
riscv: Enlarge the default SYS_MALLOC_F_LEN
riscv: Probe cpus during boot
riscv: Remove non-DM version of print_cpuinfo()
riscv: Add CSR numbers
riscv: Add exception codes for xcause register
riscv: Update supports_extension() to use desc from cpu driver
riscv: Add indirect stringification to csr_xxx ops
riscv: Do some basic architecture level cpu initialization
riscv: Move trap handler codes to mtrap.S
riscv: Fix context restore before returning from trap handler
riscv: Return to previous privilege level after trap handling
riscv: Adjust the _exit_trap() position to come before handle_trap()
riscv: Save boot hart id to the global data
riscv: bootm: Change to use boot_hart from global data
riscv: Remove ae350.dts
Lukas Auer (1):
riscv: add Kconfig entries for the code model
arch/riscv/Kconfig | 60 ++++++++- arch/riscv/Makefile | 9 +- arch/riscv/cpu/Makefile | 2 +- arch/riscv/cpu/ax25/Kconfig | 8 +- arch/riscv/cpu/cpu.c | 94 +++++++++----- arch/riscv/cpu/mtrap.S | 103 +++++++++++++++ arch/riscv/cpu/qemu/Kconfig | 12 ++ arch/riscv/cpu/qemu/cpu.c | 14 +++ arch/riscv/cpu/start.S | 93 +------------- arch/riscv/dts/ae350.dts | 229 --------------------------------- arch/riscv/include/asm/csr.h | 16 +-- arch/riscv/include/asm/encoding.h | 236 +++++++++++++++++++++++++++++++++++ arch/riscv/include/asm/global_data.h | 4 + arch/riscv/include/asm/syscon.h | 19 +++ arch/riscv/lib/Makefile | 2 + arch/riscv/lib/asm-offsets.c | 19 +++ arch/riscv/lib/bootm.c | 2 +- arch/riscv/lib/interrupts.c | 62 +++++---- arch/riscv/lib/rdtime.c | 38 ++++++ arch/riscv/lib/sifive_clint.c | 84 +++++++++++++ board/emulation/qemu-riscv/Kconfig | 1 + drivers/cpu/Kconfig | 6 + drivers/cpu/Makefile | 1 + drivers/cpu/riscv_cpu.c | 116 +++++++++++++++++ drivers/timer/Kconfig | 7 ++ drivers/timer/Makefile | 1 + drivers/timer/riscv_timer.c | 56 +++++++++ include/cpu.h | 3 + 28 files changed, 898 insertions(+), 399 deletions(-) create mode 100644 arch/riscv/cpu/mtrap.S create mode 100644 arch/riscv/cpu/qemu/Kconfig delete mode 100644 arch/riscv/dts/ae350.dts create mode 100644 arch/riscv/include/asm/syscon.h create mode 100644 arch/riscv/lib/asm-offsets.c create mode 100644 arch/riscv/lib/rdtime.c create mode 100644 arch/riscv/lib/sifive_clint.c create mode 100644 drivers/cpu/riscv_cpu.c create mode 100644 drivers/timer/riscv_timer.c
Signature · 1 line
2.7.4
PATCH v4 1/25 riscv: add Kconfig entries for the code model
From: Lukas Auer <[email protected]>
RISC-V has two code models, medium low (medlow) and medium any (medany). Medlow limits addressable memory to a single 2 GiB range between the absolute addresses -2 GiB and +2 GiB. Medany limits addressable memory to any single 2 GiB address range.
By default, medlow is selected for U-Boot on both 32-bit and 64-bit systems.
The -mcmodel compiler flag is selected according to the Kconfig configuration.
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/riscv/Kconfig | 18 ++++++++++++++++++ arch/riscv/Makefile | 9 ++++++++- 2 files changed, 26 insertions(+), 1 deletion(-)
arch/riscv/Kconfig +18 -0
@@ -44,6 +44,24 @@ config ARCH_RV64I endchoice +choice + prompt "Code Model" + default CMODEL_MEDLOW + +config CMODEL_MEDLOW + bool "medium low code model" + help + U-Boot and its statically defined symbols must lie within a single 2 GiB + address range and must lie between absolute addresses -2 GiB and +2 GiB. + +config CMODEL_MEDANY + bool "medium any code model" + help + U-Boot and its statically defined symbols must be within any single 2 GiB + address range. + +endchoice + config RISCV_ISA_C bool "Emit compressed instructions" default y
arch/riscv/Makefile +8 -1
@@ -17,8 +17,15 @@ endif ifeq ($(CONFIG_RISCV_ISA_C),y) ARCH_C = c endif +ifeq ($(CONFIG_CMODEL_MEDLOW),y) + CMODEL = medlow +endif +ifeq ($(CONFIG_CMODEL_MEDANY),y) + CMODEL = medany +endif -ARCH_FLAGS = -march=$(ARCH_BASE)$(ARCH_A)$(ARCH_C) -mabi=$(ABI) +ARCH_FLAGS = -march=$(ARCH_BASE)$(ARCH_A)$(ARCH_C) -mabi=$(ABI) \ + -mcmodel=$(CMODEL) PLATFORM_CPPFLAGS += $(ARCH_FLAGS) CFLAGS_EFI += $(ARCH_FLAGS)
Signature · 1 line
2.7.4
PATCH v4 2/25 dm: cpu: Add timebase frequency to the platdata
In reply to Bin MengThis adds a timebase_freq member to the 'struct cpu_platdata', to hold the "timebase-frequency" value in the cpu or /cpus node.
---
Changes in v4: None
Changes in v3: None
Changes in v2:
- Use 'Hz' instead of 'HZ'
include/cpu.h | 3 +++ 1 file changed, 3 insertions(+)
include/cpu.h +3 -0
@@ -14,6 +14,8 @@* @device_id: Driver-defined device identifier * @family: DMTF CPU Family identifier * @id: DMTF CPU Processor identifier +* @timebase_freq: the current frequency at which the cpu timer timebase +* registers are updated (in Hz) * * This can be accessed with dev_get_parent_platdata() for any UCLASS_CPU * device.
@@ -24,6 +26,7 @@ struct cpu_platdata {ulong device_id;u16 family;u32 id[2 ]; +u32 timebase_freq; };/* CPU features - mostly just a placeholder for now */
Signature · 1 line
2.7.4
PATCH v4 3/25 riscv: qemu: Create a simple-bus driver for the soc node
In reply to Bin MengTo enumerate devices on the /soc/ node, create a "simple-bus" driver to match "riscv-virtio-soc".
---
Changes in v4: None
Changes in v3: None
Changes in v2:
- add DM_FLAG_PRE_RELOC flag to the simple-bus driver
arch/riscv/cpu/qemu/cpu.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
arch/riscv/cpu/qemu/cpu.c +14 -0
@@ -4,6 +4,7 @@*/ #include <common.h> +#include <dm.h> /* * cleanup_before_linux() is called just before we call linux
@@ -19,3 +20,16 @@ int cleanup_before_linux(void)return 0 ; } + +/* To enumerate devices on the /soc/ node, create a "simple-bus" driver */ +static const struct udevice_id riscv_virtio_soc_ids[] = { + { .compatible ="riscv-virtio-soc" }, + { } +}; + +U_BOOT_DRIVER (riscv_virtio_soc) = { + .name ="riscv_virtio_soc" , + .id =UCLASS_SIMPLE_BUS , + .of_match = riscv_virtio_soc_ids, + .flags =DM_FLAG_PRE_RELOC , +};
Signature · 1 line
2.7.4
PATCH v4 4/25 cpu: Add a RISC-V CPU driver
In reply to Bin MengThis adds a driver for RISC-V CPU. Note the driver will bind a RISC-V timer driver if "timebase-frequency" property is present in the device tree.
---
Changes in v4: None
Changes in v3: None
Changes in v2:
- pass NULL as the timer device to device_bind_with_driver_data()
drivers/cpu/Kconfig | 6 +++ drivers/cpu/Makefile | 1 + drivers/cpu/riscv_cpu.c | 116 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 123 insertions(+) create mode 100644 drivers/cpu/riscv_cpu.c
drivers/cpu/Kconfig +6 -0
@@ -13,3 +13,9 @@ config CPU_MPC83XX select CLK_MPC83XX help Support CPU cores for SoCs of the MPC83xx series. + +config CPU_RISCV + bool "Enable RISC-V CPU driver" + depends on CPU && RISCV + help + Support CPU cores for RISC-V architecture.
drivers/cpu/Makefile +1 -0
@@ -8,4 +8,5 @@ obj-$(CONFIG_CPU) += cpu-uclass.o obj-$(CONFIG_ARCH_BMIPS) += bmips_cpu.o obj-$(CONFIG_CPU_MPC83XX) += mpc83xx_cpu.o +obj-$(CONFIG_CPU_RISCV) += riscv_cpu.o obj-$(CONFIG_SANDBOX) += cpu_sandbox.o
drivers/cpu/riscv_cpu.c new file +116 -0
116 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v4 5/25 timer: Add generic driver for RISC-V privileged architecture defined timer
In reply to Bin MengRISC-V privileged architecture v1.10 defines a real-time counter, exposed as a memory-mapped machine-mode register - mtime. mtime must run at constant frequency, and the platform must provide a mechanism for determining the timebase of mtime. The mtime register has a 64-bit precision on all RV32, RV64, and RV128 systems.
Different platform may have different implementation of the mtime block hence an API riscv_get_time() is required by this driver for platform codes to hide such implementation details. For example, on some platforms mtime is provided by the CLINT module, while on some other platforms a simple 'rdtime' can be used to get the timer counter.
With this timer driver the U-Boot timer functionalities like delay works correctly now.
---
Changes in v4: None
Changes in v3:
- remove 'select RISCV_CLINT' in Kconfig
- do not mention the spec version number v1.10
- adjust riscv_get_time() API signature to have a return value
Changes in v2:
- remove the probe to syscon driver in the timer probe, to make the driver generic, and rely on platform codes to provide the API riscv_get_time().
drivers/timer/Kconfig | 7 ++++++ drivers/timer/Makefile | 1 + drivers/timer/riscv_timer.c | 56 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 64 insertions(+) create mode 100644 drivers/timer/riscv_timer.c
drivers/timer/Kconfig +7 -0
@@ -126,6 +126,13 @@ config OMAP_TIMER help Select this to enable an timer for Omap devices. +config RISCV_TIMER + bool "RISC-V timer support" + depends on TIMER && RISCV + help + Select this to enable support for the timer as defined + by the RISC-V privileged architecture spec. + config ROCKCHIP_TIMER bool "Rockchip timer support" depends on TIMER
drivers/timer/Makefile +1 -0
@@ -13,6 +13,7 @@ obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence-ttc.o obj-$(CONFIG_DESIGNWARE_APB_TIMER) += dw-apb-timer.o obj-$(CONFIG_MPC83XX_TIMER) += mpc83xx_timer.o obj-$(CONFIG_OMAP_TIMER) += omap-timer.o +obj-$(CONFIG_RISCV_TIMER) += riscv_timer.o obj-$(CONFIG_ROCKCHIP_TIMER) += rockchip_timer.o obj-$(CONFIG_SANDBOX_TIMER) += sandbox_timer.o obj-$(CONFIG_STI_TIMER) += sti-timer.o
drivers/timer/riscv_timer.c new file +56 -0
56 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v4 6/25 riscv: ax25: Hide the ax25-specific Kconfig option
In reply to Bin MengThere is no need to expose RISCV_NDS to the Kconfig menu as it is an ax25-specific option.
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/riscv/cpu/ax25/Kconfig | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
arch/riscv/cpu/ax25/Kconfig +3 -5
@@ -1,7 +1,5 @@ config RISCV_NDS - bool "AndeStar V5 ISA support" - default n + bool help - Say Y here if you plan to run U-Boot on AndeStar v5 - platforms and use some specific features which are - provided by Andes Technology AndeStar V5 Families. + Run U-Boot on AndeStar v5 platforms and use some specific features + which are provided by Andes Technology AndeStar V5 Families.
Signature · 1 line
2.7.4
PATCH v4 7/25 riscv: Introduce a Kconfig option for machine mode
In reply to Bin MengFrom: Anup Patel <[email protected]>
So far we have a Kconfig option for supervisor mode. This adds an option for the machine mode.
---
Changes in v4: None
Changes in v3: None
Changes in v2:
- incorporated and reworked Anup's S-mode timer patch @ http://patchwork.ozlabs.org/patch/1006663/
arch/riscv/Kconfig | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-)
arch/riscv/Kconfig +16 -5
@@ -62,6 +62,22 @@ config CMODEL_MEDANY endchoice +choice + prompt "Run Mode" + default RISCV_MMODE + +config RISCV_MMODE + bool "Machine" + help + Choose this option to build U-Boot for RISC-V M-Mode. + +config RISCV_SMODE + bool "Supervisor" + help + Choose this option to build U-Boot for RISC-V S-Mode. + +endchoice + config RISCV_ISA_C bool "Emit compressed instructions" default y
@@ -73,11 +89,6 @@ config RISCV_ISA_C config RISCV_ISA_A def_bool y -config RISCV_SMODE - bool "Run in S-Mode" - help - Enable this option to build U-Boot for RISC-V S-Mode - config 32BIT bool
Signature · 1 line
2.7.4
PATCH v4 8/25 riscv: Add a SYSCON driver for SiFive's Core Local Interruptor
In reply to Bin MengThis adds U-Boot syscon driver for SiFive's Core Local Interruptor (CLINT). The CLINT block holds memory-mapped control and status registers associated with software and timer interrupts.
This driver implements the riscv_get_time() API as required by the generic RISC-V timer driver, as well as some other APIs that are needed for handling IPI.
---
Changes in v4: None
Changes in v3:
- check return value of syscon_get_first_range()
Changes in v2:
- rename the driver name to sifive_clint
- save the clint base address to arch specific global data to support pre-relocation stage
- remove the probe routine
- add riscv_clear_ipi() API
arch/riscv/Kconfig | 9 ++++ arch/riscv/include/asm/global_data.h | 3 ++ arch/riscv/include/asm/syscon.h | 19 ++++++++ arch/riscv/lib/Makefile | 1 + arch/riscv/lib/sifive_clint.c | 84 ++++++++++++++++++++++++++++++++++++ 5 files changed, 116 insertions(+) create mode 100644 arch/riscv/include/asm/syscon.h create mode 100644 arch/riscv/lib/sifive_clint.c
arch/riscv/Kconfig +9 -0
@@ -95,4 +95,13 @@ config 32BIT config 64BIT bool +config SIFIVE_CLINT + bool + depends on RISCV_MMODE + select REGMAP + select SYSCON + help + The SiFive CLINT block holds memory-mapped control and status registers + associated with software and timer interrupts. + endmenu
arch/riscv/include/asm/global_data.h +3 -0
@@ -12,6 +12,9 @@/* Architecture-specific global data */ struct arch_global_data { +#ifdef CONFIG_SIFIVE_CLINT +void __iomem *clint;/* clint base address */ +#endif };#include <asm-generic/global_data.h>
arch/riscv/include/asm/syscon.h new file +19 -0
@@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (C) 2018, Bin Meng <[email protected]> +*/ + +#ifndef _ASM_SYSCON_H +#define _ASM_SYSCON_H + +/* +* System controllers in a RISC-V system +* +* So far only SiFive's Core Local Interruptor (CLINT) is defined. +*/ +enum { +RISCV_NONE , +RISCV_SYSCON_CLINT ,/* Core Local Interruptor (CLINT) */ +}; + +#endif /* _ASM_SYSCON_H */
arch/riscv/lib/Makefile +1 -0
@@ -9,6 +9,7 @@ obj-$(CONFIG_CMD_BOOTM) += bootm.o obj-$(CONFIG_CMD_GO) += boot.o obj-y += cache.o +obj-$(CONFIG_SIFIVE_CLINT) += sifive_clint.o obj-y += interrupts.o obj-y += reset.o obj-y += setjmp.o
arch/riscv/lib/sifive_clint.c new file +84 -0
84 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v4 9/25 riscv: Implement riscv_get_time() API using rdtime instruction
In reply to Bin MengFrom: Anup Patel <[email protected]>
This adds an implementation of riscv_get_time() API that is using rdtime instruction.
This is the case for S-mode U-Boot, and is useful for processors that support rdtime in M-mode too.
---
Changes in v4: None
Changes in v3: None
Changes in v2:
- incorporated and reworked Anup's S-mode timer patch @ http://patchwork.ozlabs.org/patch/1006663/
arch/riscv/Kconfig | 8 ++++++++ arch/riscv/lib/Makefile | 1 + arch/riscv/lib/rdtime.c | 38 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 47 insertions(+) create mode 100644 arch/riscv/lib/rdtime.c
arch/riscv/Kconfig +8 -0
@@ -104,4 +104,12 @@ config SIFIVE_CLINT The SiFive CLINT block holds memory-mapped control and status registers associated with software and timer interrupts. +config RISCV_RDTIME + bool + default y if RISCV_SMODE + help + The provides the riscv_get_time() API that is implemented using the + standard rdtime instruction. This is the case for S-mode U-Boot, and + is useful for processors that support rdtime in M-mode too. + endmenu
arch/riscv/lib/Makefile +1 -0
@@ -9,6 +9,7 @@ obj-$(CONFIG_CMD_BOOTM) += bootm.o obj-$(CONFIG_CMD_GO) += boot.o obj-y += cache.o +obj-$(CONFIG_RISCV_RDTIME) += rdtime.o obj-$(CONFIG_SIFIVE_CLINT) += sifive_clint.o obj-y += interrupts.o obj-y += reset.o
arch/riscv/lib/rdtime.c new file +38 -0
@@ -0,0 +1,38 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2018, Anup Patel <[email protected]> +* Copyright (C) 2018, Bin Meng <[email protected]> +* +* The riscv_get_time() API implementation that is using the +* standard rdtime instruction. +*/ + +#include <common.h> + +/* Implement the API required by RISC-V timer driver */ +int riscv_get_time (u64 *time) +{ +#ifdef CONFIG_64BIT +u64 n; + + __asm__ __volatile__ ( +"rdtime %0" + :"=r" (n)); + + *time = n; +#else +u32 lo, hi, tmp; + + __asm__ __volatile__ ( +"1:\n" +"rdtimeh %0\n" +"rdtime %1\n" +"rdtimeh %2\n" +"bne %0, %2, 1b" + :"=&r" (hi),"=&r" (lo),"=&r" (tmp)); + + *time = ((u64 )hi <<32 ) | lo; +#endif + +return 0 ; +}
Signature · 1 line
2.7.4
PATCH v4 10/25 riscv: qemu: Add platform-specific Kconfig options
In reply to Bin MengAdd the QEMU RISC-V platform-specific Kconfig options, to include CPU and timer drivers.
---
Changes in v4: None
Changes in v3: None
Changes in v2:
- add CMD_CPU as well
arch/riscv/Kconfig | 1 + arch/riscv/cpu/qemu/Kconfig | 11 +++++++++++ board/emulation/qemu-riscv/Kconfig | 1 + 3 files changed, 13 insertions(+) create mode 100644 arch/riscv/cpu/qemu/Kconfig
arch/riscv/Kconfig +1 -0
@@ -22,6 +22,7 @@ source "board/emulation/qemu-riscv/Kconfig" # platform-specific options below source "arch/riscv/cpu/ax25/Kconfig" +source "arch/riscv/cpu/qemu/Kconfig" # architecture-specific options below
arch/riscv/cpu/qemu/Kconfig new file +11 -0
@@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2018, Bin Meng <[email protected]> + +config QEMU_RISCV + bool + imply CPU + imply CPU_RISCV + imply RISCV_TIMER + imply SIFIVE_CLINT if RISCV_MMODE + imply CMD_CPU
board/emulation/qemu-riscv/Kconfig +1 -0
@@ -18,6 +18,7 @@ config SYS_TEXT_BASE config BOARD_SPECIFIC_OPTIONS # dummy def_bool y + select QEMU_RISCV imply SYS_NS16550 imply VIRTIO_MMIO imply VIRTIO_NET
Signature · 1 line
2.7.4
PATCH v4 11/25 riscv: Enlarge the default SYS_MALLOC_F_LEN
In reply to Bin MengIncrease the heap size for the pre-relocation stage, so that CPU driver can be loaded.
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/riscv/Kconfig | 3 +++ 1 file changed, 3 insertions(+)
arch/riscv/Kconfig +3 -0
@@ -113,4 +113,7 @@ config RISCV_RDTIME standard rdtime instruction. This is the case for S-mode U-Boot, and is useful for processors that support rdtime in M-mode too. +config SYS_MALLOC_F_LEN + default 0x1000 + endmenu
Signature · 1 line
2.7.4
PATCH v4 12/25 riscv: Probe cpus during boot
In reply to Bin MengThis calls cpu_probe_all() to probe all available cpus.
---
Changes in v4: None
Changes in v3:
- probe cpus in the pre-relocation stage too
Changes in v2:
- move to arch/riscv/cpu/cpu.c
arch/riscv/cpu/cpu.c | 26 ++++++++++++++++++++++++++ arch/riscv/cpu/qemu/Kconfig | 1 + 2 files changed, 27 insertions(+)
arch/riscv/cpu/cpu.c +26 -0
@@ -4,6 +4,8 @@*/ #include <common.h> +#include <cpu.h> +#include <log.h> #include <asm/csr.h> /*
@@ -53,3 +55,27 @@ int print_cpuinfo(void)return 0 ; } + +static int riscv_cpu_probe (void ) +{ +#ifdef CONFIG_CPU +int ret; + +/* probe cpus so that RISC-V timer can be bound */ + ret =cpu_probe_all (); +if (ret) +return log_msg_ret ("RISC-V cpus probe failed\n" , ret); +#endif + +return 0 ; +} + +int arch_cpu_init_dm (void ) +{ +return riscv_cpu_probe (); +} + +int arch_early_init_r (void ) +{ +return riscv_cpu_probe (); +}
arch/riscv/cpu/qemu/Kconfig +1 -0
@@ -4,6 +4,7 @@ config QEMU_RISCV bool + select ARCH_EARLY_INIT_R imply CPU imply CPU_RISCV imply RISCV_TIMER
Signature · 1 line
2.7.4
PATCH v4 13/25 riscv: Remove non-DM version of print_cpuinfo()
In reply to Bin MengWith DM CPU driver, the non-DM version of print_cpuinfo() is no longer needed.
---
Changes in v4: None
Changes in v3:
- new patch to remove non-DM version of print_cpuinfo()
Changes in v2: None
arch/riscv/cpu/cpu.c | 37 ------------------------------------- 1 file changed, 37 deletions(-)
arch/riscv/cpu/cpu.c +0 -37
@@ -14,48 +14,11 @@*/ phys_addr_t prior_stage_fdt_address __attribute__((section(".data"))); -enum { -ISA_INVALID =0 , -ISA_32BIT , -ISA_64BIT , -ISA_128BIT -}; - -static const char *const isa_bits[] = { - [ISA_INVALID ] =NULL , - [ISA_32BIT ] ="32" , - [ISA_64BIT ] ="64" , - [ISA_128BIT ] ="128" -}; -static inline bool supports_extension (char ext) {return csr_read (misa) & (1 << (ext -'a' )); } -int print_cpuinfo (void ) -{ -char name[32 ]; -char *s = name; -int bit; - - s +=sprintf (name,"rv" ); - bit =csr_read (misa) >> (sizeof (long ) *8 -2 ); - s +=sprintf (s, isa_bits[bit]); - -supports_extension ('i' ) ? *s++ ='i' :'r' ; -supports_extension ('m' ) ? *s++ ='m' :'i' ; -supports_extension ('a' ) ? *s++ ='a' :'s' ; -supports_extension ('f' ) ? *s++ ='f' :'c' ; -supports_extension ('d' ) ? *s++ ='d' :'-' ; -supports_extension ('c' ) ? *s++ ='c' :'v' ; - *s++ ='\0' ; - -printf ("CPU: %s\n" , name); - -return 0 ; -} -static int riscv_cpu_probe (void ) {#ifdef CONFIG_CPU
Signature · 1 line
2.7.4
PATCH v4 14/25 riscv: Add CSR numbers
In reply to Bin MengThe standard RISC-V ISA sets aside a 12-bit encoding space for up to 4096 CSRs. This adds all known CSR numbers as defined in the RISC-V Privileged Architecture Version 1.10.
---
Changes in v4: None
Changes in v3:
- add sedeleg (0x102) and sideleg (0x103) CSRs
Changes in v2: None
arch/riscv/include/asm/encoding.h | 221 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 221 insertions(+)
arch/riscv/include/asm/encoding.h +221 -0
@@ -152,6 +152,227 @@#define RISCV_PGSHIFT 12#define RISCV_PGSIZE BIT(RISCV_PGSHIFT) +/* CSR numbers */ +#define CSR_FFLAGS 0x1 +#define CSR_FRM 0x2 +#define CSR_FCSR 0x3 + +#define CSR_SSTATUS 0x100 +#define CSR_SEDELEG 0x102 +#define CSR_SIDELEG 0x103 +#define CSR_SIE 0x104 +#define CSR_STVEC 0x105 +#define CSR_SCOUNTEREN 0x106 +#define CSR_SSCRATCH 0x140 +#define CSR_SEPC 0x141 +#define CSR_SCAUSE 0x142 +#define CSR_STVAL 0x143 +#define CSR_SIP 0x144 +#define CSR_SATP 0x180 + +#define CSR_MSTATUS 0x300 +#define CSR_MISA 0x301 +#define CSR_MEDELEG 0x302 +#define CSR_MIDELEG 0x303 +#define CSR_MIE 0x304 +#define CSR_MTVEC 0x305 +#define CSR_MCOUNTEREN 0x306 +#define CSR_MHPMEVENT3 0x323 +#define CSR_MHPMEVENT4 0x324 +#define CSR_MHPMEVENT5 0x325 +#define CSR_MHPMEVENT6 0x326 +#define CSR_MHPMEVENT7 0x327 +#define CSR_MHPMEVENT8 0x328 +#define CSR_MHPMEVENT9 0x329 +#define CSR_MHPMEVENT10 0x32a +#define CSR_MHPMEVENT11 0x32b +#define CSR_MHPMEVENT12 0x32c +#define CSR_MHPMEVENT13 0x32d +#define CSR_MHPMEVENT14 0x32e +#define CSR_MHPMEVENT15 0x32f +#define CSR_MHPMEVENT16 0x330 +#define CSR_MHPMEVENT17 0x331 +#define CSR_MHPMEVENT18 0x332 +#define CSR_MHPMEVENT19 0x333 +#define CSR_MHPMEVENT20 0x334 +#define CSR_MHPMEVENT21 0x335 +#define CSR_MHPMEVENT22 0x336 +#define CSR_MHPMEVENT23 0x337 +#define CSR_MHPMEVENT24 0x338 +#define CSR_MHPMEVENT25 0x339 +#define CSR_MHPMEVENT26 0x33a +#define CSR_MHPMEVENT27 0x33b +#define CSR_MHPMEVENT28 0x33c +#define CSR_MHPMEVENT29 0x33d +#define CSR_MHPMEVENT30 0x33e +#define CSR_MHPMEVENT31 0x33f +#define CSR_MSCRATCH 0x340 +#define CSR_MEPC 0x341 +#define CSR_MCAUSE 0x342 +#define CSR_MTVAL 0x343 +#define CSR_MIP 0x344 +#define CSR_PMPCFG0 0x3a0 +#define CSR_PMPCFG1 0x3a1 +#define CSR_PMPCFG2 0x3a2 +#define CSR_PMPCFG3 0x3a3 +#define CSR_PMPADDR0 0x3b0 +#define CSR_PMPADDR1 0x3b1 +#define CSR_PMPADDR2 0x3b2 +#define CSR_PMPADDR3 0x3b3 +#define CSR_PMPADDR4 0x3b4 +#define CSR_PMPADDR5 0x3b5 +#define CSR_PMPADDR6 0x3b6 +#define CSR_PMPADDR7 0x3b7 +#define CSR_PMPADDR8 0x3b8 +#define CSR_PMPADDR9 0x3b9 +#define CSR_PMPADDR10 0x3ba +#define CSR_PMPADDR11 0x3bb +#define CSR_PMPADDR12 0x3bc +#define CSR_PMPADDR13 0x3bd +#define CSR_PMPADDR14 0x3be +#define CSR_PMPADDR15 0x3bf + +#define CSR_TSELECT 0x7a0 +#define CSR_TDATA1 0x7a1 +#define CSR_TDATA2 0x7a2 +#define CSR_TDATA3 0x7a3 +#define CSR_DCSR 0x7b0 +#define CSR_DPC 0x7b1 +#define CSR_DSCRATCH 0x7b2 + +#define CSR_MCYCLE 0xb00 +#define CSR_MINSTRET 0xb02 +#define CSR_MHPMCOUNTER3 0xb03 +#define CSR_MHPMCOUNTER4 0xb04 +#define CSR_MHPMCOUNTER5 0xb05 +#define CSR_MHPMCOUNTER6 0xb06 +#define CSR_MHPMCOUNTER7 0xb07 +#define CSR_MHPMCOUNTER8 0xb08 +#define CSR_MHPMCOUNTER9 0xb09 +#define CSR_MHPMCOUNTER10 0xb0a +#define CSR_MHPMCOUNTER11 0xb0b +#define CSR_MHPMCOUNTER12 0xb0c +#define CSR_MHPMCOUNTER13 0xb0d +#define CSR_MHPMCOUNTER14 0xb0e +#define CSR_MHPMCOUNTER15 0xb0f +#define CSR_MHPMCOUNTER16 0xb10 +#define CSR_MHPMCOUNTER17 0xb11 +#define CSR_MHPMCOUNTER18 0xb12 +#define CSR_MHPMCOUNTER19 0xb13 +#define CSR_MHPMCOUNTER20 0xb14 +#define CSR_MHPMCOUNTER21 0xb15 +#define CSR_MHPMCOUNTER22 0xb16 +#define CSR_MHPMCOUNTER23 0xb17 +#define CSR_MHPMCOUNTER24 0xb18 +#define CSR_MHPMCOUNTER25 0xb19 +#define CSR_MHPMCOUNTER26 0xb1a +#define CSR_MHPMCOUNTER27 0xb1b +#define CSR_MHPMCOUNTER28 0xb1c +#define CSR_MHPMCOUNTER29 0xb1d +#define CSR_MHPMCOUNTER30 0xb1e +#define CSR_MHPMCOUNTER31 0xb1f +#define CSR_MCYCLEH 0xb80 +#define CSR_MINSTRETH 0xb82 +#define CSR_MHPMCOUNTER3H 0xb83 +#define CSR_MHPMCOUNTER4H 0xb84 +#define CSR_MHPMCOUNTER5H 0xb85 +#define CSR_MHPMCOUNTER6H 0xb86 +#define CSR_MHPMCOUNTER7H 0xb87 +#define CSR_MHPMCOUNTER8H 0xb88 +#define CSR_MHPMCOUNTER9H 0xb89 +#define CSR_MHPMCOUNTER10H 0xb8a +#define CSR_MHPMCOUNTER11H 0xb8b +#define CSR_MHPMCOUNTER12H 0xb8c +#define CSR_MHPMCOUNTER13H 0xb8d +#define CSR_MHPMCOUNTER14H 0xb8e +#define CSR_MHPMCOUNTER15H 0xb8f +#define CSR_MHPMCOUNTER16H 0xb90 +#define CSR_MHPMCOUNTER17H 0xb91 +#define CSR_MHPMCOUNTER18H 0xb92 +#define CSR_MHPMCOUNTER19H 0xb93 +#define CSR_MHPMCOUNTER20H 0xb94 +#define CSR_MHPMCOUNTER21H 0xb95 +#define CSR_MHPMCOUNTER22H 0xb96 +#define CSR_MHPMCOUNTER23H 0xb97 +#define CSR_MHPMCOUNTER24H 0xb98 +#define CSR_MHPMCOUNTER25H 0xb99 +#define CSR_MHPMCOUNTER26H 0xb9a +#define CSR_MHPMCOUNTER27H 0xb9b +#define CSR_MHPMCOUNTER28H 0xb9c +#define CSR_MHPMCOUNTER29H 0xb9d +#define CSR_MHPMCOUNTER30H 0xb9e +#define CSR_MHPMCOUNTER31H 0xb9f + +#define CSR_CYCLE 0xc00 +#define CSR_TIME 0xc01 +#define CSR_INSTRET 0xc02 +#define CSR_HPMCOUNTER3 0xc03 +#define CSR_HPMCOUNTER4 0xc04 +#define CSR_HPMCOUNTER5 0xc05 +#define CSR_HPMCOUNTER6 0xc06 +#define CSR_HPMCOUNTER7 0xc07 +#define CSR_HPMCOUNTER8 0xc08 +#define CSR_HPMCOUNTER9 0xc09 +#define CSR_HPMCOUNTER10 0xc0a +#define CSR_HPMCOUNTER11 0xc0b +#define CSR_HPMCOUNTER12 0xc0c +#define CSR_HPMCOUNTER13 0xc0d +#define CSR_HPMCOUNTER14 0xc0e +#define CSR_HPMCOUNTER15 0xc0f +#define CSR_HPMCOUNTER16 0xc10 +#define CSR_HPMCOUNTER17 0xc11 +#define CSR_HPMCOUNTER18 0xc12 +#define CSR_HPMCOUNTER19 0xc13 +#define CSR_HPMCOUNTER20 0xc14 +#define CSR_HPMCOUNTER21 0xc15 +#define CSR_HPMCOUNTER22 0xc16 +#define CSR_HPMCOUNTER23 0xc17 +#define CSR_HPMCOUNTER24 0xc18 +#define CSR_HPMCOUNTER25 0xc19 +#define CSR_HPMCOUNTER26 0xc1a +#define CSR_HPMCOUNTER27 0xc1b +#define CSR_HPMCOUNTER28 0xc1c +#define CSR_HPMCOUNTER29 0xc1d +#define CSR_HPMCOUNTER30 0xc1e +#define CSR_HPMCOUNTER31 0xc1f +#define CSR_CYCLEH 0xc80 +#define CSR_TIMEH 0xc81 +#define CSR_INSTRETH 0xc82 +#define CSR_HPMCOUNTER3H 0xc83 +#define CSR_HPMCOUNTER4H 0xc84 +#define CSR_HPMCOUNTER5H 0xc85 +#define CSR_HPMCOUNTER6H 0xc86 +#define CSR_HPMCOUNTER7H 0xc87 +#define CSR_HPMCOUNTER8H 0xc88 +#define CSR_HPMCOUNTER9H 0xc89 +#define CSR_HPMCOUNTER10H 0xc8a +#define CSR_HPMCOUNTER11H 0xc8b +#define CSR_HPMCOUNTER12H 0xc8c +#define CSR_HPMCOUNTER13H 0xc8d +#define CSR_HPMCOUNTER14H 0xc8e +#define CSR_HPMCOUNTER15H 0xc8f +#define CSR_HPMCOUNTER16H 0xc90 +#define CSR_HPMCOUNTER17H 0xc91 +#define CSR_HPMCOUNTER18H 0xc92 +#define CSR_HPMCOUNTER19H 0xc93 +#define CSR_HPMCOUNTER20H 0xc94 +#define CSR_HPMCOUNTER21H 0xc95 +#define CSR_HPMCOUNTER22H 0xc96 +#define CSR_HPMCOUNTER23H 0xc97 +#define CSR_HPMCOUNTER24H 0xc98 +#define CSR_HPMCOUNTER25H 0xc99 +#define CSR_HPMCOUNTER26H 0xc9a +#define CSR_HPMCOUNTER27H 0xc9b +#define CSR_HPMCOUNTER28H 0xc9c +#define CSR_HPMCOUNTER29H 0xc9d +#define CSR_HPMCOUNTER30H 0xc9e +#define CSR_HPMCOUNTER31H 0xc9f + +#define CSR_MVENDORID 0xf11 +#define CSR_MARCHID 0xf12 +#define CSR_MIMPID 0xf13 +#define CSR_MHARTID 0xf14 +#endif /* __riscv */ #endif /* RISCV_CSR_ENCODING_H */
Signature · 1 line
2.7.4
PATCH v4 15/25 riscv: Add exception codes for xcause register
In reply to Bin MengThis adds all exception codes in encoding.h.
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/riscv/include/asm/encoding.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
arch/riscv/include/asm/encoding.h +15 -0
@@ -85,6 +85,21 @@#define IRQ_COP 12#define IRQ_HOST 13 +#define CAUSE_MISALIGNED_FETCH 0 +#define CAUSE_FETCH_ACCESS 1 +#define CAUSE_ILLEGAL_INSTRUCTION 2 +#define CAUSE_BREAKPOINT 3 +#define CAUSE_MISALIGNED_LOAD 4 +#define CAUSE_LOAD_ACCESS 5 +#define CAUSE_MISALIGNED_STORE 6 +#define CAUSE_STORE_ACCESS 7 +#define CAUSE_USER_ECALL 8 +#define CAUSE_SUPERVISOR_ECALL 9 +#define CAUSE_MACHINE_ECALL 11 +#define CAUSE_FETCH_PAGE_FAULT 12 +#define CAUSE_LOAD_PAGE_FAULT 13 +#define CAUSE_STORE_PAGE_FAULT 15 +#define DEFAULT_RSTVEC 0x00001000#define DEFAULT_NMIVEC 0x00001004#define DEFAULT_MTVEC 0x00001010
Signature · 1 line
2.7.4
PATCH v4 16/25 riscv: Update supports_extension() to use desc from cpu driver
In reply to Bin MengThis updates supports_extension() implementation to use the desc string from the cpu driver whenever possible, which avoids the reading of misa CSR for S-mode U-Boot.
---
Changes in v4:
- print warnings for S-mode without CONFIG_CPU
Changes in v3:
- new patch to update supports_extension() to use desc from cpu driver
Changes in v2: None
arch/riscv/cpu/cpu.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
arch/riscv/cpu/cpu.c +22 -0
@@ -5,8 +5,10 @@#include <common.h> #include <cpu.h> +#include <dm.h> #include <log.h> #include <asm/csr.h> +#include <dm/uclass-internal.h> /* * prior_stage_fdt_address must be stored in the data section since it is used
@@ -16,7 +18,27 @@ phys_addr_t prior_stage_fdt_address __attribute__((section(".data")));static inline bool supports_extension (char ext) { +#ifdef CONFIG_CPU +struct udevice *dev; +char desc[32 ]; + +uclass_find_first_device (UCLASS_CPU , &dev); +if (!cpu_get_desc (dev, desc,sizeof (desc))) { +/* skip the first 4 characters (rv32|rv64) */ +if (strchr (desc +4 , ext)) +return true; + } + +return false; +#else /* !CONFIG_CPU */ +#ifdef CONFIG_RISCV_MMODE return csr_read (misa) & (1 << (ext -'a' )); +#else /* !CONFIG_RISCV_MMODE */ +#warning "There is no way to determine the available extensions in S-mode." +#warning "Please convert your board to use the RISC-V CPU driver." +return false; +#endif /* CONFIG_RISCV_MMODE */ +#endif /* CONFIG_CPU */ }static int riscv_cpu_probe (void )
Signature · 1 line
2.7.4
Auer
PATCH v4 16/25 riscv: Update supports_extension() to use desc from cpu driver
Hi Bin,
Quoted 37 lines · Bin Meng
This updates
supports_extension()implementation to use the desc string from the cpu driver whenever possible, which avoids the reading of misa CSR for S-mode U-Boot.Signed-off-by Bin Meng <[email protected]>---
Changes in v4:
- print warnings for S-mode withoutCONFIG_CPUChanges in v3:
- new patch to updatesupports_extension()to use desc from cpu driverChanges in v2: None
arch/riscv/cpu/cpu.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)arch/riscv/cpu/cpu.c +2
-0@@ -5,8 +5,10 @@#include <common.h> #include <cpu.h> +#include <dm.h> #include <log.h> #include <asm/csr.h> +#include <dm/uclass-internal.h> /* * prior_stage_fdt_address must be stored in the data section since it is used
arch/riscv/cpu/cpu.c phys_addr_t prior_stage_fdt_address · line 26
Quoted 9 lines
arch/riscv/cpu/cpu.c +5
-0@@ -16,7 +18,27 @@ phys_addr_t prior_stage_fdt_address __attribute__((section(".data")));static inline bool supports_extension (char ext) { +#ifdef CONFIG_CPU +struct udevice *dev; +char desc[32 ]; + +uclass_find_first_device (UCLASS_CPU , &dev);
Sorry, I missed this before. Can you add error handling here to catch uclass_find_first_device returning an error or not finding a device? It would probably also make sense to print a warning message to the user in this case.
Other than that, this patch and the series look good!
Thanks,
Lukas
Quoted 20 lines
arch/riscv/cpu/cpu.c +11
-0+if (!cpu_get_desc (dev, desc,sizeof (desc))) { +/* skip the first 4 characters (rv32|rv64) */ +if (strchr (desc +4 , ext)) +return true; + } + +return false; +#else /* !CONFIG_CPU */ +#ifdef CONFIG_RISCV_MMODE return csr_read (misa) & (1 << (ext -'a' )); +#else /* !CONFIG_RISCV_MMODE */ +#warning "There is no way to determine the available extensions inS-mode."
arch/riscv/cpu/cpu.c +4
-0+#warning "Please convert your board to use the RISC-V CPU driver." +return false; +#endif /* CONFIG_RISCV_MMODE */ +#endif /* CONFIG_CPU */ }static int riscv_cpu_probe (void )
PATCH v4 16/25 riscv: Update supports_extension() to use desc from cpu driver
Hi Lukas,
Quoted 43 lines · Lukas
Hi Bin,
Quoted 39 lines · Bin Meng
This updates
supports_extension()implementation to use the desc string from the cpu driver whenever possible, which avoids the reading of misa CSR for S-mode U-Boot.Signed-off-by Bin Meng <[email protected]>---
Changes in v4:
- print warnings for S-mode withoutCONFIG_CPUChanges in v3:
- new patch to updatesupports_extension()to use desc from cpu driverChanges in v2: None
arch/riscv/cpu/cpu.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)arch/riscv/cpu/cpu.c +2
-0@@ -5,8 +5,10 @@#include <common.h> #include <cpu.h> +#include <dm.h> #include <log.h> #include <asm/csr.h> +#include <dm/uclass-internal.h> /* * prior_stage_fdt_address must be stored in the data section since it is used
arch/riscv/cpu/cpu.c +0
-0@@ -16,7 +18,27 @@ phys_addr_t prior_stage_fdt_address __attribute__((section(".data")));
Quoted 13 lines
arch/riscv/cpu/cpu.c phys_addr_t prior_stage_fdt_address __attribute__((section(".data"))); · line 25
Quoted 7 lines
arch/riscv/cpu/cpu.c +5
-0static inline bool supports_extension (char ext) { +#ifdef CONFIG_CPU +struct udevice *dev; +char desc[32 ]; + +uclass_find_first_device (UCLASS_CPU , &dev);Sorry, I missed this before. Can you add error handling here to catch
uclass_find_first_devicereturning an error or not finding a device? It would probably also make sense to print a warning message to the user in this case.
Added the error check in v5. Note only checking not finding a device (dev == NULL) is enough as if uclass_find_first_device() returns an error code, dev is NULL too.
Quoted 3 lines
Other than that, this patch and the series look good!
Reviewed-by Lukas Auer <[email protected]>
Regards,
Bin
Auer
PATCH v4 16/25 riscv: Update supports_extension() to use desc from cpu driver
Hi Bin,
Quoted 65 lines · Bin Meng
Hi Lukas,
Quoted 44 lines · Lukas
Hi Bin,
Quoted 40 lines · Bin Meng
This updates
supports_extension()implementation to use the desc string from the cpu driver whenever possible, which avoids the reading of misa CSR for S-mode U-Boot.Signed-off-by Bin Meng <[email protected]>---
Changes in v4:
- print warnings for S-mode withoutCONFIG_CPUChanges in v3:
- new patch to updatesupports_extension()to use desc from cpu driverChanges in v2: None
arch/riscv/cpu/cpu.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)arch/riscv/cpu/cpu.c +2
-0@@ -5,8 +5,10 @@#include <common.h> #include <cpu.h> +#include <dm.h> #include <log.h> #include <asm/csr.h> +#include <dm/uclass-internal.h> /* * prior_stage_fdt_address must be stored in the data section since
it is usedarch/riscv/cpu/cpu.c +0
-0@@ -16,7 +18,27 @@ phys_addr_t prior_stage_fdt_address __attribute__((section(".data")));Quoted 16 lines
arch/riscv/cpu/cpu.c phys_addr_t prior_stage_fdt_address __attribute__((section(".data"))); · line 25
Quoted 7 lines
arch/riscv/cpu/cpu.c +5
-0static inline bool supports_extension (char ext) { +#ifdef CONFIG_CPU +struct udevice *dev; +char desc[32 ]; + +uclass_find_first_device (UCLASS_CPU , &dev);Sorry, I missed this before. Can you add error handling here to catch
uclass_find_first_devicereturning an error or not finding a device? It
would probably also make sense to print a warning message to the user
in this case.
Quoted 4 lines
Added the error check in v5. Note only checking not finding a device (dev == NULL) is enough as if
uclass_find_first_device()returns an error code, dev is NULL too.
Thanks! The series looks good now!
Lukas
Quoted 6 lines
Quoted 3 lines
Other than that, this patch and the series look good!
Reviewed-by Lukas Auer <[email protected]>Regards,
Bin
PATCH v4 17/25 riscv: Add indirect stringification to csr_xxx ops
In reply to Bin MengWith current csr_xxx ops, we cannot pass a macro to parameter 'csr', hence we need add another level to allow the parameter to be a macro itself, aka indirect stringification.
---
Changes in v4: None
Changes in v3: None
Changes in v2:
- new patch to add indirect stringification to csr_xxx ops
arch/riscv/include/asm/csr.h | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)
arch/riscv/include/asm/csr.h +9 -7
@@ -61,10 +61,12 @@#ifndef __ASSEMBLY__ +#define xcsr (csr) #csr +#define csr_swap (csr, val) \ ({ \ unsigned long __v = (unsigned long)(val); \ - __asm__ __volatile__ ("csrrw %0, " #csr ", %1" \ + __asm__ __volatile__ ("csrrw %0, " xcsr(csr) ", %1" \ : "=r" (__v) : "rK" (__v) \ : "memory"); \ __v; \
@@ -73,7 +75,7 @@#define csr_read (csr) \ ({ \ register unsigned long __v; \ - __asm__ __volatile__ ("csrr %0, " #csr \ + __asm__ __volatile__ ("csrr %0, " xcsr(csr) \ : "=r" (__v) : \ : "memory"); \ __v; \
@@ -82,7 +84,7 @@#define csr_write (csr, val) \ ({ \ unsigned long __v = (unsigned long)(val); \ - __asm__ __volatile__ ("csrw " #csr ", %0" \ + __asm__ __volatile__ ("csrw " xcsr(csr) ", %0" \ : : "rK" (__v) \ : "memory"); \ })
@@ -90,7 +92,7 @@#define csr_read_set (csr, val) \ ({ \ unsigned long __v = (unsigned long)(val); \ - __asm__ __volatile__ ("csrrs %0, " #csr ", %1" \ + __asm__ __volatile__ ("csrrs %0, " xcsr(csr) ", %1" \ : "=r" (__v) : "rK" (__v) \ : "memory"); \ __v; \
@@ -99,7 +101,7 @@#define csr_set (csr, val) \ ({ \ unsigned long __v = (unsigned long)(val); \ - __asm__ __volatile__ ("csrs " #csr ", %0" \ + __asm__ __volatile__ ("csrs " xcsr(csr) ", %0" \ : : "rK" (__v) \ : "memory"); \ })
@@ -107,7 +109,7 @@#define csr_read_clear (csr, val) \ ({ \ unsigned long __v = (unsigned long)(val); \ - __asm__ __volatile__ ("csrrc %0, " #csr ", %1" \ + __asm__ __volatile__ ("csrrc %0, " xcsr(csr) ", %1" \ : "=r" (__v) : "rK" (__v) \ : "memory"); \ __v; \
@@ -116,7 +118,7 @@#define csr_clear (csr, val) \ ({ \ unsigned long __v = (unsigned long)(val); \ - __asm__ __volatile__ ("csrc " #csr ", %0" \ + __asm__ __volatile__ ("csrc " xcsr(csr) ", %0" \ : : "rK" (__v) \ : "memory"); \ })
Signature · 1 line
2.7.4
PATCH v4 18/25 riscv: Do some basic architecture level cpu initialization
In reply to Bin MengIn arch_cpu_init_dm() do some basic architecture level cpu initialization, like FPU enable, etc.
---
Changes in v4: None
Changes in v3:
- only initialize mcounteren CSR for S-mode
- only touch satp in M-mode U-Boot
- move the implementation to arch_cpu_init_dm()
Changes in v2:
- use csr_set() to set MSTATUS_FS
- only enabling the cycle, time, and instret counters
- change to use satp
arch/riscv/cpu/cpu.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-)
arch/riscv/cpu/cpu.c +26 -1
@@ -8,6 +8,7 @@#include <dm.h> #include <log.h> #include <asm/csr.h> +#include <asm/encoding.h> #include <dm/uclass-internal.h> /*
@@ -57,7 +58,31 @@ static int riscv_cpu_probe(void)int arch_cpu_init_dm (void ) { -return riscv_cpu_probe (); +int ret; + + ret =riscv_cpu_probe (); +if (ret) +return ret; + +/* Enable FPU */ +if (supports_extension ('d' ) ||supports_extension ('f' )) { +csr_set (MODE_PREFIX (status),MSTATUS_FS ); +csr_write (fcsr,0 ); + } + +if (CONFIG_IS_ENABLED (RISCV_MMODE )) { +/* +* Enable perf counters for cycle, time, +* and instret counters only +*/ +csr_write (mcounteren,GENMASK (2 ,0 )); + +/* Disable paging */ +if (supports_extension ('s' )) +csr_write (satp,0 ); + } + +return 0 ; }int arch_early_init_r (void )
Signature · 1 line
2.7.4
PATCH v4 19/25 riscv: Move trap handler codes to mtrap.S
In reply to Bin MengCurrently the M-mode trap handler codes are in start.S. For future extension, move them to a separate file mtrap.S.
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/riscv/cpu/Makefile | 2 +- arch/riscv/cpu/mtrap.S | 111 ++++++++++++++++++++++++++++++++++++++++++++++++ arch/riscv/cpu/start.S | 89 -------------------------------------- 3 files changed, 112 insertions(+), 90 deletions(-) create mode 100644 arch/riscv/cpu/mtrap.S
arch/riscv/cpu/Makefile +1 -1
@@ -4,4 +4,4 @@ extra-y = start.o -obj-y += cpu.o +obj-y += cpu.o mtrap.o
arch/riscv/cpu/mtrap.S new file +111 -0
111 lines not on this page · raw message
arch/riscv/cpu/start.S +0 -89
92 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v4 20/25 riscv: Fix context restore before returning from trap handler
In reply to Bin Mengsp cannot be loaded before restoring other registers.
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/riscv/cpu/mtrap.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/riscv/cpu/mtrap.S +1 -1
@@ -77,7 +77,6 @@ trap_entry: #endif csrs MODE_PREFIX(status), t0 LREG x1, 1 * REGBYTES(sp) - LREG x2, 2 * REGBYTES(sp) LREG x3, 3 * REGBYTES(sp) LREG x4, 4 * REGBYTES(sp) LREG x5, 5 * REGBYTES(sp)
@@ -107,5 +106,6 @@ trap_entry: LREG x29, 29 * REGBYTES(sp) LREG x30, 30 * REGBYTES(sp) LREG x31, 31 * REGBYTES(sp) + LREG x2, 2 * REGBYTES(sp) addi sp, sp, 32 * REGBYTES MODE_PREFIX(ret)
Signature · 1 line
2.7.4
PATCH v4 21/25 riscv: Return to previous privilege level after trap handling
In reply to Bin MengAt present the trap handler returns to hardcoded M-mode/S-mode. Change to returning to previous privilege level instead.
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/riscv/cpu/mtrap.S | 8 -------- 1 file changed, 8 deletions(-)
arch/riscv/cpu/mtrap.S +0 -8
@@ -68,14 +68,6 @@ trap_entry: jal handle_trap csrw MODE_PREFIX(epc), a0 -#ifdef CONFIG_RISCV_SMODE - /* Remain in S-mode after sret */ - li t0, SSTATUS_SPP -#else - /* Remain in M-mode after mret */ - li t0, MSTATUS_MPP -#endif - csrs MODE_PREFIX(status), t0 LREG x1, 1 * REGBYTES(sp) LREG x3, 3 * REGBYTES(sp) LREG x4, 4 * REGBYTES(sp)
Signature · 1 line
2.7.4
PATCH v4 22/25 riscv: Adjust the _exit_trap() position to come before handle_trap()
In reply to Bin MengWith this change, we can avoid a forward declaration.
---
Changes in v4: None
Changes in v3: None
Changes in v2:
- rebase on u-boot/master
- drop the patch "riscv: Pass correct exception code to _exit_trap()"
- drop the patch "riscv: Refactor handle_trap() a little for future extension"
- drop the patch "riscv: Allow U-Boot to run on hart 0 only", and leave the SMP support to Lukas's future patch series
arch/riscv/lib/interrupts.c | 62 ++++++++++++++++++++++----------------------- 1 file changed, 30 insertions(+), 32 deletions(-)
arch/riscv/lib/interrupts.c +30 -32
@@ -12,7 +12,36 @@#include <asm/system.h> #include <asm/encoding.h> -static void _exit_trap (ulong code,ulong epc,struct pt_regs *regs); +static void _exit_trap (ulong code,ulong epc,struct pt_regs *regs) +{ +static const char *const exception_code[] = { +"Instruction address misaligned" , +"Instruction access fault" , +"Illegal instruction" , +"Breakpoint" , +"Load address misaligned" , +"Load access fault" , +"Store/AMO address misaligned" , +"Store/AMO access fault" , +"Environment call from U-mode" , +"Environment call from S-mode" , +"Reserved" , +"Environment call from M-mode" , +"Instruction page fault" , +"Load page fault" , +"Reserved" , +"Store/AMO page fault" , + }; + +if (code <ARRAY_SIZE (exception_code)) { +printf ("exception code: %ld , %s , epc %lx , ra %lx\n" , + code, exception_code[code], epc, regs->ra); + }else { +printf ("Reserved\n" ); + } + +hang (); +}int interrupt_init (void ) {
@@ -72,34 +101,3 @@ __attribute__((weak)) void external_interrupt(struct pt_regs *regs) __attribute__((weak))void timer_interrupt (struct pt_regs *regs) { } - -static void _exit_trap (ulong code,ulong epc,struct pt_regs *regs) -{ -static const char *const exception_code[] = { -"Instruction address misaligned" , -"Instruction access fault" , -"Illegal instruction" , -"Breakpoint" , -"Load address misaligned" , -"Load access fault" , -"Store/AMO address misaligned" , -"Store/AMO access fault" , -"Environment call from U-mode" , -"Environment call from S-mode" , -"Reserved" , -"Environment call from M-mode" , -"Instruction page fault" , -"Load page fault" , -"Reserved" , -"Store/AMO page fault" , - }; - -if (code <ARRAY_SIZE (exception_code)) { -printf ("exception code: %ld , %s , epc %lx , ra %lx\n" , - code, exception_code[code], epc, regs->ra); - }else { -printf ("Reserved\n" ); - } - -hang (); -}
Signature · 1 line
2.7.4
PATCH v4 23/25 riscv: Save boot hart id to the global data
In reply to Bin MengAt present the hart id passed via a0 in the U-Boot entry is saved to s0 at the beginning but does not preserve later. Save it to the global data structure so that it can be used later.
---
Changes in v4: None
Changes in v3:
- new patch to save boot hart id to the global data
Changes in v2: None
arch/riscv/cpu/start.S | 4 ++++ arch/riscv/include/asm/global_data.h | 1 + arch/riscv/lib/asm-offsets.c | 19 +++++++++++++++++++ 3 files changed, 24 insertions(+) create mode 100644 arch/riscv/lib/asm-offsets.c
arch/riscv/cpu/start.S +4 -0
@@ -14,6 +14,7 @@ #include <common.h> #include <elf.h> #include <asm/encoding.h> +#include <generated/asm-offsets.h> #ifdef CONFIG_32BIT #define LREG lw
@@ -70,6 +71,9 @@ call_board_init_f_0: jal board_init_f_init_reserve + /* save the boot hart id to global_data */ + SREG s0, GD_BOOT_HART(gp) + mv a0, zero /* a0 <-- boot_flags = 0 */ la t5, board_init_f jr t5 /* jump to board_init_f() */
arch/riscv/include/asm/global_data.h +1 -0
@@ -12,6 +12,7 @@/* Architecture-specific global data */ struct arch_global_data { +long boot_hart;/* boot hart id */ #ifdef CONFIG_SIFIVE_CLINT void __iomem *clint;/* clint base address */ #endif
arch/riscv/lib/asm-offsets.c new file +19 -0
@@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2018, Bin Meng <[email protected]> +* +* From arch/x86/lib/asm-offsets.c +* +* This program is used to generate definitions needed by +* assembly language modules. +*/ + +#include <common.h> +#include <linux/kbuild.h> + +int main (void ) +{ + DEFINE(GD_BOOT_HART, offsetof(gd_t, arch.boot_hart)); + +return 0 ; +}
Signature · 1 line
2.7.4
PATCH v4 24/25 riscv: bootm: Change to use boot_hart from global data
In reply to Bin MengAvoid reading mhartid CSR directly, instead use the one we saved in the global data structure before.
With this patch, BBL no longer needs to be hacked to provide the mhartid CSR emulation for S-mode U-Boot.
---
Changes in v4: None
Changes in v3:
- new patch to change to use boot_hart from global data
Changes in v2: None
arch/riscv/lib/bootm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/riscv/lib/bootm.c +1 -1
@@ -93,7 +93,7 @@ static void boot_jump_linux(bootm_headers_t *images, int flag)if (!fake) {if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) -kernel (csr_read (mhartid), images->ft_addr); +kernel (gd->arch.boot_hart, images->ft_addr); } }
Signature · 1 line
2.7.4
PATCH v4 25/25 riscv: Remove ae350.dts
In reply to Bin MengThis is not used by any board. Remove it.
---
Changes in v4: None
Changes in v3:
- new patch to remove ae350.dts
Changes in v2: None
arch/riscv/dts/ae350.dts | 229 ----------------------------------------------- 1 file changed, 229 deletions(-) delete mode 100644 arch/riscv/dts/ae350.dts
arch/riscv/dts/ae350.dts deleted +0 -229
@@ -1,229 +0,0 @@ -/dts-v1/; - -/ { - #address-cells = <2>; - #size-cells = <2>; - compatible = "andestech,ax25"; - model = "andestech,ax25"; - - aliases { - uart0 = &serial0; - spi0 = &spi; - }; - - chosen { - bootargs = "console=ttyS0,38400n8 debug loglevel=7"; - stdout-path = "uart0:38400n8"; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - timebase-frequency = <60000000>; - CPU0: cpu at 0 { - device_type = "cpu"; - reg = <0>; - status = "okay"; - compatible = "riscv"; - riscv,isa = "rv64imafdc"; - mmu-type = "riscv,sv39"; - clock-frequency = <60000000>; - d-cache-size = <0x8000>; - d-cache-line-size = <32>; - CPU0_intc: interrupt-controller { - #interrupt-cells = <1>; - interrupt-controller; - compatible = "riscv,cpu-intc"; - }; - }; - }; - - memory at 0 { - device_type = "memory"; - reg = <0x0 0x00000000 0x0 0x40000000>; - }; - - soc { - #address-cells = <2>; - #size-cells = <2>; - compatible = "andestech,riscv-ae350-soc"; - ranges; - - plic0: interrupt-controller at e4000000 { - compatible = "riscv,plic0"; - #address-cells = <2>; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0x0 0xe4000000 0x0 0x2000000>; - riscv,ndev=<71>; - interrupts-extended = <&CPU0_intc 11 &CPU0_intc 9>; - }; - - plic1: interrupt-controller at e6400000 { - compatible = "riscv,plic1"; - #address-cells = <2>; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0x0 0xe6400000 0x0 0x400000>; - riscv,ndev=<1>; - interrupts-extended = <&CPU0_intc 3>; - }; - - plmt0 at e6000000 { - compatible = "riscv,plmt0"; - interrupts-extended = <&CPU0_intc 7>; - reg = <0x0 0xe6000000 0x0 0x100000>; - }; - }; - - spiclk: virt_100mhz { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <100000000>; - }; - - timer0: timer at f0400000 { - compatible = "andestech,atcpit100"; - reg = <0x0 0xf0400000 0x0 0x1000>; - clock-frequency = <60000000>; - interrupts = <3 4>; - interrupt-parent = <&plic0>; - }; - - serial0: serial at f0300000 { - compatible = "andestech,uart16550", "ns16550a"; - reg = <0x0 0xf0300000 0x0 0x1000>; - interrupts = <9 4>; - clock-frequency = <19660800>; - reg-shift = <2>; - reg-offset = <32>; - no-loopback-test = <1>; - interrupt-parent = <&plic0>; - }; - - mac0: mac at e0100000 { - compatible = "andestech,atmac100"; - reg = <0x0 0xe0100000 0x0 0x1000>; - interrupts = <19 4>; - interrupt-parent = <&plic0>; - }; - - mmc0: mmc at f0e00000 { - compatible = "andestech,atfsdc010"; - max-frequency = <100000000>; - clock-freq-min-max = <400000 100000000>; - fifo-depth = <0x10>; - reg = <0x0 0xf0e00000 0x0 0x1000>; - interrupts = <18 4>; - cap-sd-highspeed; - interrupt-parent = <&plic0>; - }; - - dma0: dma at f0c00000 { - compatible = "andestech,atcdmac300"; - reg = <0x0 0xf0c00000 0x0 0x1000>; - interrupts = <10 4 64 4 65 4 66 4 67 4 68 4 69 4 70 4 71 4>; - dma-channels = <8>; - interrupt-parent = <&plic0>; - }; - - lcd0: lcd at e0200000 { - compatible = "andestech,atflcdc100"; - reg = <0x0 0xe0200000 0x0 0x1000>; - interrupts = <20 4>; - interrupt-parent = <&plic0>; - }; - - smc0: smc at e0400000 { - compatible = "andestech,atfsmc020"; - reg = <0x0 0xe0400000 0x0 0x1000>; - }; - - snd0: snd at f0d00000 { - compatible = "andestech,atfac97"; - reg = <0x0 0xf0d00000 0x0 0x1000>; - interrupts = <17 4>; - interrupt-parent = <&plic0>; - }; - - virtio_mmio at fe007000 { - interrupts = <0x17 0x4>; - interrupt-parent = <0x2>; - reg = <0x0 0xfe007000 0x0 0x1000>; - compatible = "virtio,mmio"; - }; - - virtio_mmio at fe006000 { - interrupts = <0x16 0x4>; - interrupt-parent = <0x2>; - reg = <0x0 0xfe006000 0x0 0x1000>; - compatible = "virtio,mmio"; - }; - - virtio_mmio at fe005000 { - interrupts = <0x15 0x4>; - interrupt-parent = <0x2>; - reg = <0x0 0xfe005000 0x0 0x1000>; - compatible = "virtio,mmio"; - }; - - virtio_mmio at fe004000 { - interrupts = <0x14 0x4>; - interrupt-parent = <0x2>; - reg = <0x0 0xfe004000 0x0 0x1000>; - compatible = "virtio,mmio"; - }; - - virtio_mmio at fe003000 { - interrupts = <0x13 0x4>; - interrupt-parent = <0x2>; - reg = <0x0 0xfe003000 0x0 0x1000>; - compatible = "virtio,mmio"; - }; - - virtio_mmio at fe002000 { - interrupts = <0x12 0x4>; - interrupt-parent = <0x2>; - reg = <0x0 0xfe002000 0x0 0x1000>; - compatible = "virtio,mmio"; - }; - - virtio_mmio at fe001000 { - interrupts = <0x11 0x4>; - interrupt-parent = <0x2>; - reg = <0x0 0xfe001000 0x0 0x1000>; - compatible = "virtio,mmio"; - }; - - virtio_mmio at fe000000 { - interrupts = <0x10 0x4>; - interrupt-parent = <0x2>; - reg = <0x0 0xfe000000 0x0 0x1000>; - compatible = "virtio,mmio"; - }; - - nor at 0,0 { - compatible = "cfi-flash"; - reg = <0x0 0x88000000 0x0 0x1000>; - bank-width = <2>; - device-width = <1>; - }; - - spi: spi at f0b00000 { - compatible = "andestech,atcspi200"; - reg = <0x0 0xf0b00000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - num-cs = <1>; - clocks = <&spiclk>; - interrupts = <4 4>; - interrupt-parent = <&plic0>; - flash at 0 { - compatible = "spi-flash"; - spi-max-frequency = <50000000>; - reg = <0>; - spi-cpol; - spi-cpha; - }; - }; -};
Signature · 1 line
2.7.4
v4 cover riscv: Adding RISC-V CPU and timer driver
In reply to Bin MengThanks for folding my timer patches in your series.
I agree with Lukas comment on "riscv: Update supports_extension() to use desc from cpu driver". Please don't access misa in S-mode.
Otherwise entire series looks good to me.
Regards,
Anup