sf: Add Macronix MX25R6435F SPI NOR flash to flash parameters array
PATCH 1/1 sf: Add Macronix MX25R6435F SPI NOR flash to flash parameters array
On i.MX7ULP EVK board, we use MX25R6435F NOR flash, add its parameters and IDs to flash parameter array. Otherwise, the flash probe will fails.
--- drivers/mtd/spi/spi_flash_ids.c | 1 + 1 file changed, 1 insertion(+)
drivers/mtd/spi/spi_flash_ids.c +1 -0
@@ -94,6 +94,7 @@ const struct spi_flash_info spi_flash_ids[] = { {"mx25u25635f", INFO(0xc22539, 0x0, 64 * 1024, 512, RD_FULL | WR_QPP) }, {"mx66u51235f", INFO(0xc2253a, 0x0, 64 * 1024, 1024, RD_FULL | WR_QPP) }, {"mx66l1g45g", INFO(0xc2201b, 0x0, 64 * 1024, 2048, RD_FULL | WR_QPP) }, + {"mx25r6435f", INFO(0xc22817, 0x0, 64 * 1024, 128, RD_FULL | SECT_4K) }, #endif #ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */ {"s25fl008a", INFO(0x010213, 0x0, 64 * 1024, 16, 0) },
Signature · 1 line
2.7.4
PATCH 1/1 sf: Add Macronix MX25R6435F SPI NOR flash to flash parameters array
+ Vignesh
Quoted 14 lines · Ye Li
On i.MX7ULP EVK board, we use MX25R6435F NOR flash, add its parameters and IDs to flash parameter array. Otherwise, the flash probe will fails.
Signed-off-by Ye Li <[email protected]>--- drivers/mtd/spi/spi_flash_ids.c | 1 + 1 file changed, 1 insertion(+)drivers/mtd/spi/spi_flash_ids.c +0
-0
drivers/mtd/spi/spi_flash_ids.c const struct spi_flash_info spi_flash_ids[] = { · line 97
Quoted 4 lines
drivers/mtd/spi/spi_flash_ids.c +1
-0@@ -94,6 +94,7 @@ const struct spi_flash_info spi_flash_ids[] = { {"mx25u25635f", INFO(0xc22539, 0x0, 64 * 1024, 512, RD_FULL | WR_QPP) }, {"mx66u51235f", INFO(0xc2253a, 0x0, 64 * 1024, 1024, RD_FULL | WR_QPP) }, {"mx66l1g45g", INFO(0xc2201b, 0x0, 64 * 1024, 2048, RD_FULL | WR_QPP) }, + {"mx25r6435f", INFO(0xc22817, 0x0, 64 * 1024, 128, RD_FULL | SECT_4K) },
Look like this would also support WR_QPP, how about updating the same?
Vignesh R
maintainerPATCH 1/1 sf: Add Macronix MX25R6435F SPI NOR flash to flash parameters array
Quoted 10 lines · Jagan Teki
+ Vignesh
Quoted 7 lines · Ye Li
On i.MX7ULP EVK board, we use MX25R6435F NOR flash, add its parameters and IDs to flash parameter array. Otherwise, the flash probe will fails.
Signed-off-by Ye Li <[email protected]>--- drivers/mtd/spi/spi_flash_ids.c | 1 +
This file no longer exists after recent SPI NOR migration. Could you rebase on the latest? The capabilities flags are now same as kernel.
Quoted 14 lines
drivers/mtd/spi/spi_flash_ids.c const struct spi_flash_info spi_flash_ids[] = { · line 97
Quoted 11 lines
1 file changed, 1 insertion(+)drivers/mtd/spi/spi_flash_ids.c +1
-0@@ -94,6 +94,7 @@ const struct spi_flash_info spi_flash_ids[] = { {"mx25u25635f", INFO(0xc22539, 0x0, 64 * 1024, 512, RD_FULL | WR_QPP) }, {"mx66u51235f", INFO(0xc2253a, 0x0, 64 * 1024, 1024, RD_FULL | WR_QPP) }, {"mx66l1g45g", INFO(0xc2201b, 0x0, 64 * 1024, 2048, RD_FULL | WR_QPP) }, + {"mx25r6435f", INFO(0xc22817, 0x0, 64 * 1024, 128, RD_FULL | SECT_4K) },Look like this would also support
WR_QPP, how about updating the same?
Signature · 2 lines
Regards Vignesh