Could not suspend device 0000:00:03.3: error -5
Hello List,
i am running Debian testing with the kernel 2.6.8-2-686 and when i try to put my laptop into suspend to ram mode, i get this dmesg error:
PM: Preparing system for suspend
Stopping tasks:
=================================================================|
NVRM: RmPowerManagement: 3
Could not suspend device 0000:00:03.3: error -5
NVRM: RmPowerManagement: 4
Restarting tasks... done
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
eth0: Media Link On 100mbps full-duplex
lspci:
--------------------------
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
Subsystem: Mitac: Unknown device 8640
Flags: bus master, medium devsel, latency 128, IRQ 209 Memory at f4001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
This is my grub menu:
title Debian GNU/Linux, kernel 2.6.8-2-686 root (hd0,0) kernel /boot/vmlinuz-2.6.8-2-686 root=/dev/hda1 ro initrd /boot/initrd.img-2.6.8-2-686
savedefault
boot
dmesg | grep -i apm
---------------------------------------
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
SpiekLap:/home/spiekey# dmesg | grep -i acpi ACPI: PCI interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 177 ACPI: (supports S0 S3 S4 S5) ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 217 ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 177 ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 185 ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 193 ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 201 shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5 pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5 pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5 ACPI: PCI interrupt 0000:00:02.3[B] -> GSI 17 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 209 ACPI: Battery Slot [BAT0] (battery present) ACPI: AC Adapter [AC] (on-line) ACPI: Processor [CPU0] (supports C1, 8 throttling states) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SBTN] ACPI: Lid Switch [LID] apm: overridden by ACPI. apm: overridden by ACPI. ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 225 apm: overridden by ACPI. ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 225
any idea how i could fix this?
Thanks, Mario
Signature · 8 lines
Sparen beginnt mit GMX DSL: http://www.gmx.net/de/go/dsl ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Mario,
unload the ehci driver before suspending or upgrade your kernel to 2.6.11.
-Herman
Quoted 80 lines · Mario Ohnewald
Hello List,
i am running Debian testing with the kernel 2.6.8-2-686 and when i try to put my laptop into suspend to ram mode, i get this dmesg error:
PM: Preparing system for suspend
Stopping tasks:
=================================================================|
NVRM: RmPowerManagement: 3
Could not suspend device 0000:00:03.3: error -5
NVRM: RmPowerManagement: 4
Restarting tasks... done
apm: BIOS version 1.2 Flags0x03(Driver version 1.16ac)
apm: overridden by ACPI.
eth0: Media Link On 100mbps full-duplexlspci:
--------------------------
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
Subsystem: Mitac: Unknown device 8640
Flags: bus master, medium devsel, latency 128, IRQ 209 Memory atf4001000(32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2This is my grub menu:
title Debian GNU/Linux, kernel 2.6.8-2-686 root (hd0,0) kernel /boot/vmlinuz-2.6.8-2-686 root=/dev/hda1 ro initrd /boot/initrd.img-2.6.8-2-686savedefault
bootdmesg | grep -i apm
---------------------------------------
apm: BIOS version 1.2 Flags0x03(Driver version 1.16ac)
apm: overridden by ACPI.SpiekLap:/home/spiekey# dmesg | grep -i acpi ACPI: PCI interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 177 ACPI: (supports S0 S3 S4 S5) ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 217 ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 177 ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 185 ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 193 ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 201 shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5 pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5 pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5 ACPI: PCI interrupt 0000:00:02.3[B] -> GSI 17 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 209 ACPI: Battery Slot [BAT0] (battery present) ACPI: AC Adapter [AC] (on-line) ACPI: Processor [CPU0] (supports C1, 8 throttling states) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SBTN] ACPI: Lid Switch [LID] apm: overridden by ACPI. apm: overridden by ACPI. ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 225 apm: overridden by ACPI. ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 225any idea how i could fix this?
Thanks, Mario
Signature · 10 lines
Herman Sheremetyev <herman-6MNMYbGzEYJWk0Htik3J/[email protected]> n/a ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click