Skip to contentSkip to conversation

arm64: defconfig: Add PWM Fan support

PATCH Applied Jon Hunter 2 participants 2 messages Feb 27, 2019 – Apr 3, 2019 Tegra architecture support

lore
Share & tools
lore

Jon Hunter

author maintainer
#0 lore raw

PATCH 1/1 arm64: defconfig: Add PWM Fan support

The Tegra194 Jetson AGX Xavier board includes a PWM based fan. Enable PWM fan support in the ARM64 defconfig to support the fan on this board. Please note that the device-tree PWM fan node is already present for this board.

---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
index 2d9c39033c1a..1fbbfbb5d9d1 100644
@@ -408,6 +408,7 @@ CONFIG_BATTERY_SBS=m
 CONFIG_BATTERY_BQ27XXX=y
 CONFIG_SENSORS_ARM_SCPI=y
 CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_PWM_FAN=m
 CONFIG_SENSORS_RASPBERRYPI_HWMON=m
 CONFIG_SENSORS_INA2XX=m
 CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
Signature · 1 line
2.7.4
#1 lore raw
Quoted 9 lines · Jon Hunter

The Tegra194 Jetson AGX Xavier board includes a PWM based fan. Enable PWM fan support in the ARM64 defconfig to support the fan on this board. Please note that the device-tree PWM fan node is already present for this board.

---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

Applied to for-5.2/arm64/defconfig, thanks.

Thierry

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel