Skip to contentSkip to conversation

FAILED: patch "[PATCH] USB: serial: cp210x: fix GPIO in autosuspend" failed to apply to 4.14-stable tree

PATCH [email protected] 1 participant 1 message Mar 8, 2019

Subsystems (3)
Stable branch USB USB serial
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 7b0b644b9aa2de5032db0f468fddca091d0b7b90 Mon Sep 17 00:00:00 2001
From: Karoly Pados <[email protected]>
Date: Sun, 17 Feb 2019 18:59:01 +0100
Subject: [PATCH] USB: serial: cp210x: fix GPIO in autosuspend

Current GPIO code in cp210x fails to take USB autosuspend into account, making it practically impossible to use GPIOs with autosuspend enabled without user configuration. Fix this like for ftdi_sio in a previous patch. Tested on a CP2102N.

Signed-off-by Karoly Pados <[email protected]>
Fixes cf5276ce7867 ("USB: serial: cp210x: Adding GPIO support for CP2105")
Cc stable <[email protected]>
Signed-off-by Johan Hovold <[email protected]>
drivers/usb/serial/cp210x.c +11 -0
index fac7a4547523..de076e866661 100644
@@ -1370,8 +1370,13 @@ static int cp210x_gpio_get(struct gpio_chip *gc, unsigned int gpio)
 	if (priv->partnum == CP210X_PARTNUM_CP2105)
 		req_type = REQTYPE_INTERFACE_TO_HOST;
 
+	result = usb_autopm_get_interface(serial->interface);
+	if (result)
+		return result;
+
 	result = cp210x_read_vendor_block(serial, req_type,
 					  CP210X_READ_LATCH, &buf, sizeof(buf));
+	usb_autopm_put_interface(serial->interface);
 	if (result < 0)
 		return result;
 

@@ -1392,6 +1397,10 @@ static void cp210x_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
 
 	buf.mask = BIT(gpio);
 
+	result = usb_autopm_get_interface(serial->interface);
+	if (result)
+		goto out;
+
 	if (priv->partnum == CP210X_PARTNUM_CP2105) {
 		result = cp210x_write_vendor_block(serial,
 						   REQTYPE_HOST_TO_INTERFACE,

@@ -1409,6 +1418,8 @@ static void cp210x_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
 					 NULL, 0, USB_CTRL_SET_TIMEOUT);
 	}
 
+	usb_autopm_put_interface(serial->interface);
+out:
 	if (result < 0) {
 		dev_err(&serial->interface->dev, "failed to set GPIO value: %d\n",
 				result);