Skip to contentSkip to conversation

patch "USB: serial: option: add support for Quectel EM12" added to usb-linus

PATCH [email protected] 1 participant 1 message Mar 29, 2019

Subsystems (3)
Stable branch USB USB serial
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

USB: serial: option: add support for Quectel EM12

to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From d1252f0237238b912c3e7a51bf237acf34c97983 Mon Sep 17 00:00:00 2001
From: Kristian Evensen <[email protected]>
Date: Sat, 2 Mar 2019 13:35:53 +0100
Subject: USB: serial: option: add support for Quectel EM12

The Quectel EM12 is a Cat. 12 LTE modem. It behaves in the exactly the same way as the EP06 (including the dynamic configuration behavior), so the same checks on reserved interfaces, etc. are needed.

Signed-off-by Kristian Evensen <[email protected]>
Cc stable <[email protected]>
Signed-off-by Johan Hovold <[email protected]>
---
 drivers/usb/serial/option.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/usb/serial/option.c +4 -0
index 11b21d9410f3..561d0b641120 100644
@@ -246,6 +246,7 @@ static void option_instat_callback(struct urb *urb);
 #define QUECTEL_PRODUCT_EC25			0x0125
 #define QUECTEL_PRODUCT_BG96			0x0296
 #define QUECTEL_PRODUCT_EP06			0x0306
+#define QUECTEL_PRODUCT_EM12			0x0512
 
 #define CMOTECH_VENDOR_ID			0x16d8
 #define CMOTECH_PRODUCT_6001			0x6001

@@ -1087,6 +1088,9 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
Signature · 1 line
2.21.0