patch "USB: serial: cp210x: add new device id" added to usb-linus

This is a note to let you know that I've just added the patch titled

    USB: serial: cp210x: add new device id

to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From a595ecdd5f60b2d93863cebb07eec7f935839b54 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <[email protected]>
Date: Wed, 27 Mar 2019 10:11:14 +0900
Subject: USB: serial: cp210x: add new device id

Lorenz Messtechnik has a device that is controlled by the cp210x driver, so add the device id to the driver. The device id was provided by Silicon-Labs for the devices from this vendor.

---
 drivers/usb/serial/cp210x.c | 1 +
 1 file changed, 1 insertion(+)

index fffe23ab0189..979bef9bfb6b 100644
@@ -80,6 +80,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME build-in converter */
 	{ USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
 	{ USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */
+	{ USB_DEVICE(0x10C4, 0x8056) }, /* Lorenz Messtechnik devices */
 	{ USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
 	{ USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
 	{ USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */

2.21.0