ath11k: Fix nss value to get proper rate_code for peer fixed rate
PATCH 1/1 ath11k: Fix nss value to get proper rate_code for peer fixed rate
The rate_code is not proper when the peer fixed rate is set by the user via the set bitrate command. The rate_code needs the nss values as {0, 1, 2, 3}. Hence fixing the nss value in this patch.
Signed-off-by Maharaja Kennadyrajan <[email protected]>
--- drivers/net/wireless/ath/ath11k/mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/ath/ath11k/mac.c +1 -1
@@ -2300,7 +2300,7 @@ ath11k_mac_set_peer_vht_fixed_rate(struct ath11k_vif *arvif,"Setting Fixed VHT Rate for peer %pM. Device will not switch to any other selected rates" , sta->addr); - rate_code =ATH11K_HW_RATE_CODE (vht_rate, nss, + rate_code =ATH11K_HW_RATE_CODE (vht_rate, nss -1 ,WMI_RATE_PREAMBLE_VHT ); ret = ath11k_wmi_set_peer_param(ar, sta->addr, arvif->vdev_id,
Signature · 7 lines
2.21.0 _______________________________________________ ath11k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath11k
Quoted 6 lines · Maharaja Kennadyrajan
The
rate_codeis not proper when the peer fixed rate is set by the user via the set bitrate command. Therate_codeneeds the nss values as {0, 1, 2, 3}. Hence fixing the nss value in this patch.Signed-off-by Maharaja Kennadyrajan <[email protected]>
Patch applied to ath.git, thanks.
703350682ff7 ath11k: Fix nss value to get proper rate_code for peer fixed rate
Signature · 9 lines
https://patchwork.kernel.org/patch/10974781/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath11k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath11k