staging: kpc2000: kpc_i2c: remove the macros inb_p and outb_p
PATCH v2 1/1 staging: kpc2000: kpc_i2c: remove the macros inb_p and outb_p
remove inb_p and outb_p to call readq/writeq directly.
---
Changes in v2:
- remove the macros inb_p/outb_p and use readq/writeq directly, per https://lkml.kernel.org/lkml/[email protected]/
--- drivers/staging/kpc2000/kpc2000_i2c.c | 112 ++++++++++++++++------------------ 1 file changed, 53 insertions(+), 59 deletions(-)
drivers/staging/kpc2000/kpc2000_i2c.c +53 -59
@@ -122,12 +122,6 @@ struct i2c_device {/* Not really a feature, but it's convenient to handle it as such */ #define FEATURE_IDF BIT(15) -// FIXME! -#undef inb_p -#define inb_p (a) readq((void *)a) -#undef outb_p -#define outb_p (d, a) writeq(d, (void *)a) -/* Make sure the SMBus host is ready to start transmitting. * Return 0 if it is, -EBUSY if it is not. */
@@ -135,7 +129,7 @@ static int i801_check_pre(struct i2c_device *priv) {int status; - status =inb_p (SMBHSTSTS (priv)); + status =readq ((void *)SMBHSTSTS (priv));if (status &SMBHSTSTS_HOST_BUSY ) {dev_err (&priv->adapter.dev,"SMBus is busy, can't use it! (status=%x)\n" , status);return -EBUSY ;
@@ -144,8 +138,8 @@ static int i801_check_pre(struct i2c_device *priv) status &=STATUS_FLAGS ;if (status) {//dev_dbg(&priv->adapter.dev, "Clearing status flags (%02x)\n", status); -outb_p (status,SMBHSTSTS (priv)); - status =inb_p (SMBHSTSTS (priv)) &STATUS_FLAGS ; +writeq (status, (void *)SMBHSTSTS (priv)); + status =readq ((void *)SMBHSTSTS (priv)) &STATUS_FLAGS ;if (status) {dev_err (&priv->adapter.dev,"Failed clearing status flags (%02x)\n" , status);return -EBUSY ;
@@ -164,15 +158,15 @@ static int i801_check_post(struct i2c_device *priv, int status, int timeout)dev_err (&priv->adapter.dev,"Transaction timeout\n" );/* try to stop the current command */ dev_dbg (&priv->adapter.dev,"Terminating the current operation\n" ); -outb_p (inb_p (SMBHSTCNT (priv)) |SMBHSTCNT_KILL ,SMBHSTCNT (priv)); +writeq (readq ((void *)SMBHSTCNT (priv)) |SMBHSTCNT_KILL , (void *)SMBHSTCNT (priv));usleep_range (1000 ,2000 ); -outb_p (inb_p (SMBHSTCNT (priv)) & (~SMBHSTCNT_KILL ),SMBHSTCNT (priv)); +writeq (readq ((void *)SMBHSTCNT (priv)) & (~SMBHSTCNT_KILL ), (void *)SMBHSTCNT (priv));/* Check if it worked */ - status =inb_p (SMBHSTSTS (priv)); + status =readq ((void *)SMBHSTSTS (priv));if ((status &SMBHSTSTS_HOST_BUSY ) || !(status &SMBHSTSTS_FAILED ))dev_err (&priv->adapter.dev,"Failed terminating the transaction\n" ); -outb_p (STATUS_FLAGS ,SMBHSTSTS (priv)); +writeq (STATUS_FLAGS , (void *)SMBHSTSTS (priv));return -ETIMEDOUT ; }
@@ -191,8 +185,8 @@ static int i801_check_post(struct i2c_device *priv, int status, int timeout)if (result) {/* Clear error flags */ -outb_p (status &STATUS_FLAGS ,SMBHSTSTS (priv)); - status =inb_p (SMBHSTSTS (priv)) &STATUS_FLAGS ; +writeq (status &STATUS_FLAGS , (void *)SMBHSTSTS (priv)); + status =readq ((void *)SMBHSTSTS (priv)) &STATUS_FLAGS ;if (status)dev_warn (&priv->adapter.dev,"Failed clearing status flags at end of transaction (%02x)\n" , status); }
@@ -212,19 +206,19 @@ static int i801_transaction(struct i2c_device *priv, int xact)/* the current contents of SMBHSTCNT can be overwritten, since PEC, * INTREN, SMBSCMD are passed in xact */ -outb_p (xact |I801_START ,SMBHSTCNT (priv)); +writeq (xact |I801_START , (void *)SMBHSTCNT (priv));/* We will always wait for a fraction of a second! */ do {usleep_range (250 ,500 ); - status =inb_p (SMBHSTSTS (priv)); + status =readq ((void *)SMBHSTSTS (priv)); }while ((status &SMBHSTSTS_HOST_BUSY ) && (timeout++ <MAX_RETRIES )); result =i801_check_post (priv, status, timeout >MAX_RETRIES );if (result <0 )return result; -outb_p (SMBHSTSTS_INTR ,SMBHSTSTS (priv)); +writeq (SMBHSTSTS_INTR , (void *)SMBHSTSTS (priv));return 0 ; }
@@ -236,13 +230,13 @@ static void i801_wait_hwpec(struct i2c_device *priv)do {usleep_range (250 ,500 ); - status =inb_p (SMBHSTSTS (priv)); + status =readq ((void *)SMBHSTSTS (priv)); }while ((!(status &SMBHSTSTS_INTR )) && (timeout++ <MAX_RETRIES ));if (timeout >MAX_RETRIES )dev_dbg (&priv->adapter.dev,"PEC Timeout!\n" ); -outb_p (status,SMBHSTSTS (priv)); +writeq (status, (void *)SMBHSTSTS (priv)); }static int i801_block_transaction_by_block (struct i2c_device *priv,union i2c_smbus_data *data,char read_write,int hwpec)
@@ -250,14 +244,14 @@ static int i801_block_transaction_by_block(struct i2c_device *priv, union i2c_smint i, len;int status; -inb_p (SMBHSTCNT (priv));/* reset the data buffer index */ +readq ((void *)SMBHSTCNT (priv));/* reset the data buffer index */ /* Use 32-byte buffer to process this transaction */ if (read_write ==I2C_SMBUS_WRITE ) { len = data->block[0 ]; -outb_p (len,SMBHSTDAT0 (priv)); +writeq (len, (void *)SMBHSTDAT0 (priv));for (i =0 ; i < len; i++) -outb_p (data->block[i+1 ],SMBBLKDAT (priv)); +writeq (data->block[i+1 ], (void *)SMBBLKDAT (priv)); } status =i801_transaction (priv,I801_BLOCK_DATA |ENABLE_INT9 |I801_PEC_EN * hwpec);
@@ -265,13 +259,13 @@ static int i801_block_transaction_by_block(struct i2c_device *priv, union i2c_smreturn status;if (read_write ==I2C_SMBUS_READ ) { - len =inb_p (SMBHSTDAT0 (priv)); + len =readq ((void *)SMBHSTDAT0 (priv));if (len <1 || len >I2C_SMBUS_BLOCK_MAX )return -EPROTO ; data->block[0 ] = len;for (i =0 ; i < len; i++) - data->block[i +1 ] =inb_p (SMBBLKDAT (priv)); + data->block[i +1 ] =readq ((void *)SMBBLKDAT (priv)); }return 0 ; }
@@ -291,8 +285,8 @@ static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2 len = data->block[0 ];if (read_write ==I2C_SMBUS_WRITE ) { -outb_p (len,SMBHSTDAT0 (priv)); -outb_p (data->block[1 ],SMBBLKDAT (priv)); +writeq (len, (void *)SMBHSTDAT0 (priv)); +writeq (data->block[1 ], (void *)SMBBLKDAT (priv)); }for (i =1 ; i <= len; i++) {
@@ -307,28 +301,28 @@ static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2else smbcmd =I801_BLOCK_DATA ; } -outb_p (smbcmd |ENABLE_INT9 ,SMBHSTCNT (priv)); +writeq (smbcmd |ENABLE_INT9 , (void *)SMBHSTCNT (priv));if (i ==1 ) -outb_p (inb (SMBHSTCNT (priv)) |I801_START ,SMBHSTCNT (priv)); +writeq (inb (SMBHSTCNT (priv)) |I801_START , (void *)SMBHSTCNT (priv));/* We will always wait for a fraction of a second! */ timeout =0 ;do {usleep_range (250 ,500 ); - status =inb_p (SMBHSTSTS (priv)); + status =readq ((void *)SMBHSTSTS (priv)); }while ((!(status &SMBHSTSTS_BYTE_DONE )) && (timeout++ <MAX_RETRIES )); result =i801_check_post (priv, status, timeout >MAX_RETRIES );if (result <0 )return result;if (i ==1 && read_write ==I2C_SMBUS_READ && command !=I2C_SMBUS_I2C_BLOCK_DATA ) { - len =inb_p (SMBHSTDAT0 (priv)); + len =readq ((void *)SMBHSTDAT0 (priv));if (len <1 || len >I2C_SMBUS_BLOCK_MAX ) {dev_err (&priv->adapter.dev,"Illegal SMBus block read size %d\n" , len);/* Recover */ -while (inb_p (SMBHSTSTS (priv)) &SMBHSTSTS_HOST_BUSY ) -outb_p (SMBHSTSTS_BYTE_DONE ,SMBHSTSTS (priv)); -outb_p (SMBHSTSTS_INTR ,SMBHSTSTS (priv)); +while (readq ((void *)SMBHSTSTS (priv)) &SMBHSTSTS_HOST_BUSY ) +writeq (SMBHSTSTS_BYTE_DONE , (void *)SMBHSTSTS (priv)); +writeq (SMBHSTSTS_INTR , (void *)SMBHSTSTS (priv));return -EPROTO ; } data->block[0 ] = len;
@@ -336,11 +330,11 @@ static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2/* Retrieve/store value in SMBBLKDAT */ if (read_write ==I2C_SMBUS_READ ) - data->block[i] =inb_p (SMBBLKDAT (priv)); + data->block[i] =readq ((void *)SMBBLKDAT (priv));if (read_write ==I2C_SMBUS_WRITE && i+1 <= len) -outb_p (data->block[i+1 ],SMBBLKDAT (priv)); +writeq (data->block[i+1 ], (void *)SMBBLKDAT (priv));/* signals SMBBLKDAT ready */ -outb_p (SMBHSTSTS_BYTE_DONE |SMBHSTSTS_INTR ,SMBHSTSTS (priv)); +writeq (SMBHSTSTS_BYTE_DONE |SMBHSTSTS_INTR , (void *)SMBHSTSTS (priv)); }return 0 ;
@@ -348,8 +342,8 @@ static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2static int i801_set_block_buffer_mode (struct i2c_device *priv) { -outb_p (inb_p (SMBAUXCTL (priv)) |SMBAUXCTL_E32B ,SMBAUXCTL (priv)); -if ((inb_p (SMBAUXCTL (priv)) &SMBAUXCTL_E32B ) ==0 ) +writeq (readq ((void *)SMBAUXCTL (priv)) |SMBAUXCTL_E32B , (void *)SMBAUXCTL (priv)); +if ((readq ((void *)SMBAUXCTL (priv)) &SMBAUXCTL_E32B ) ==0 )return -EIO ;return 0 ; }
@@ -412,39 +406,39 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,switch (size) {case I2C_SMBUS_QUICK :dev_dbg (&priv->adapter.dev," [acc] SMBUS_QUICK\n" ); -outb_p (((addr &0x7f ) <<1 ) | (read_write &0x01 ),SMBHSTADD (priv)); +writeq (((addr &0x7f ) <<1 ) | (read_write &0x01 ), (void *)SMBHSTADD (priv)); xact =I801_QUICK ;break ;case I2C_SMBUS_BYTE :dev_dbg (&priv->adapter.dev," [acc] SMBUS_BYTE\n" ); -outb_p (((addr &0x7f ) <<1 ) | (read_write &0x01 ),SMBHSTADD (priv)); +writeq (((addr &0x7f ) <<1 ) | (read_write &0x01 ), (void *)SMBHSTADD (priv));if (read_write ==I2C_SMBUS_WRITE ) -outb_p (command,SMBHSTCMD (priv)); +writeq (command, (void *)SMBHSTCMD (priv)); xact =I801_BYTE ;break ;case I2C_SMBUS_BYTE_DATA :dev_dbg (&priv->adapter.dev," [acc] SMBUS_BYTE_DATA\n" ); -outb_p (((addr &0x7f ) <<1 ) | (read_write &0x01 ),SMBHSTADD (priv)); -outb_p (command,SMBHSTCMD (priv)); +writeq (((addr &0x7f ) <<1 ) | (read_write &0x01 ), (void *)SMBHSTADD (priv)); +writeq (command, (void *)SMBHSTCMD (priv));if (read_write ==I2C_SMBUS_WRITE ) -outb_p (data->byte,SMBHSTDAT0 (priv)); +writeq (data->byte, (void *)SMBHSTDAT0 (priv)); xact =I801_BYTE_DATA ;break ;case I2C_SMBUS_WORD_DATA :dev_dbg (&priv->adapter.dev," [acc] SMBUS_WORD_DATA\n" ); -outb_p (((addr &0x7f ) <<1 ) | (read_write &0x01 ),SMBHSTADD (priv)); -outb_p (command,SMBHSTCMD (priv)); +writeq (((addr &0x7f ) <<1 ) | (read_write &0x01 ), (void *)SMBHSTADD (priv)); +writeq (command, (void *)SMBHSTCMD (priv));if (read_write ==I2C_SMBUS_WRITE ) { -outb_p (data->word &0xff ,SMBHSTDAT0 (priv)); -outb_p ((data->word &0xff00 ) >>8 ,SMBHSTDAT1 (priv)); +writeq (data->word &0xff , (void *)SMBHSTDAT0 (priv)); +writeq ((data->word &0xff00 ) >>8 , (void *)SMBHSTDAT1 (priv)); } xact =I801_WORD_DATA ;break ;case I2C_SMBUS_BLOCK_DATA :dev_dbg (&priv->adapter.dev," [acc] SMBUS_BLOCK_DATA\n" ); -outb_p (((addr &0x7f ) <<1 ) | (read_write &0x01 ),SMBHSTADD (priv)); -outb_p (command,SMBHSTCMD (priv)); +writeq (((addr &0x7f ) <<1 ) | (read_write &0x01 ), (void *)SMBHSTADD (priv)); +writeq (command, (void *)SMBHSTCMD (priv)); block =1 ;break ;case I2C_SMBUS_I2C_BLOCK_DATA :
@@ -452,14 +446,14 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,/* NB: page 240 of ICH5 datasheet shows that the R/#W * bit should be cleared here, even when reading */ -outb_p ((addr &0x7f ) <<1 ,SMBHSTADD (priv)); +writeq ((addr &0x7f ) <<1 , (void *)SMBHSTADD (priv));if (read_write ==I2C_SMBUS_READ ) {/* NB: page 240 of ICH5 datasheet also shows * that DATA1 is the cmd field when reading */ -outb_p (command,SMBHSTDAT1 (priv)); +writeq (command, (void *)SMBHSTDAT1 (priv)); }else { -outb_p (command,SMBHSTCMD (priv)); +writeq (command, (void *)SMBHSTCMD (priv)); } block =1 ;break ;
@@ -470,10 +464,10 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,if (hwpec) {/* enable/disable hardware PEC */ dev_dbg (&priv->adapter.dev," [acc] hwpec: yes\n" ); -outb_p (inb_p (SMBAUXCTL (priv)) |SMBAUXCTL_CRC ,SMBAUXCTL (priv)); +writeq (readq ((void *)SMBAUXCTL (priv)) |SMBAUXCTL_CRC , (void *)SMBAUXCTL (priv)); }else {dev_dbg (&priv->adapter.dev," [acc] hwpec: no\n" ); -outb_p (inb_p (SMBAUXCTL (priv)) & (~SMBAUXCTL_CRC ),SMBAUXCTL (priv)); +writeq (readq ((void *)SMBAUXCTL (priv)) & (~SMBAUXCTL_CRC ), (void *)SMBAUXCTL (priv)); }if (block) {
@@ -491,7 +485,7 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,*/ if (hwpec || block) {dev_dbg (&priv->adapter.dev," [acc] hwpec || block\n" ); -outb_p (inb_p (SMBAUXCTL (priv)) & ~(SMBAUXCTL_CRC |SMBAUXCTL_E32B ),SMBAUXCTL (priv)); +writeq (readq ((void *)SMBAUXCTL (priv)) & ~(SMBAUXCTL_CRC |SMBAUXCTL_E32B ), (void *)SMBAUXCTL (priv)); }if (block) {dev_dbg (&priv->adapter.dev," [acc] block\n" );
@@ -510,11 +504,11 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,case I801_BYTE :/* Result put in SMBHSTDAT0 */ case I801_BYTE_DATA :dev_dbg (&priv->adapter.dev," [acc] I801_BYTE or I801_BYTE_DATA\n" ); - data->byte =inb_p (SMBHSTDAT0 (priv)); + data->byte =readq ((void *)SMBHSTDAT0 (priv));break ;case I801_WORD_DATA :dev_dbg (&priv->adapter.dev," [acc] I801_WORD_DATA\n" ); - data->word =inb_p (SMBHSTDAT0 (priv)) + (inb_p (SMBHSTDAT1 (priv)) <<8 ); + data->word =readq ((void *)SMBHSTDAT0 (priv)) + (readq ((void *)SMBHSTDAT1 (priv)) <<8 );break ; }return 0 ;
Signature · 1 line
1.8.3.1
Greg KH
maintainerQuoted 28 lines · Hao Xu
remove
inb_pandoutb_pto call readq/writeq directly.Signed-off-by Hao Xu <[email protected]>---
Changes in v2:
- remove the macros inb_p/outb_p and use readq/writeq directly, per https://lkml.kernel.org/lkml/[email protected]/--- drivers/staging/kpc2000/kpc2000_i2c.c | 112 ++++++++++++++++------------------ 1 file changed, 53 insertions(+), 59 deletions(-)drivers/staging/kpc2000/kpc2000_i2c.c +0
-6@@ -122,12 +122,6 @@ struct i2c_device {/* Not really a feature, but it's convenient to handle it as such */ #define FEATURE_IDF BIT(15) -// FIXME! -#undef inb_p -#define inb_p (a) readq((void *)a) -#undef outb_p -#define outb_p (d, a) writeq(d, (void *)a) -/* Make sure the SMBus host is ready to start transmitting. * Return 0 if it is, -EBUSY if it is not. */
drivers/staging/kpc2000/kpc2000_i2c.c static int i801_check_pre(struct i2c_device *priv) · line 132
Quoted 5 lines
drivers/staging/kpc2000/kpc2000_i2c.c +1
-1@@ -135,7 +129,7 @@ static int i801_check_pre(struct i2c_device *priv) {int status; - status =inb_p (SMBHSTSTS (priv)); + status =readq ((void *)SMBHSTSTS (priv));
Ugh, all of the void * casting, is is really needed everywhere? That just makes everything a mess...
thanks,
greg k-h
Quoted 16 lines · Hao Xu
remove
inb_pandoutb_pto call readq/writeq directly.Signed-off-by Hao Xu <[email protected]>---
Changes in v2:
- remove the macros inb_p/outb_p and use readq/writeq directly, per https://lkml.kernel.org/lkml/[email protected]/--- drivers/staging/kpc2000/kpc2000_i2c.c | 112 ++++++++++++++++------------------ 1 file changed, 53 insertions(+), 59 deletions(-)drivers/staging/kpc2000/kpc2000_i2c.c +0
-0
drivers/staging/kpc2000/kpc2000_i2c.c static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2 · line 307
Quoted 9 lines
drivers/staging/kpc2000/kpc2000_i2c.c +2
-2@@ -307,28 +301,28 @@ static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2else smbcmd =I801_BLOCK_DATA ; } -outb_p (smbcmd |ENABLE_INT9 ,SMBHSTCNT (priv)); +writeq (smbcmd |ENABLE_INT9 , (void *)SMBHSTCNT (priv));if (i ==1 ) -outb_p (inb (SMBHSTCNT (priv)) |I801_START ,SMBHSTCNT (priv)); +writeq (inb (SMBHSTCNT (priv)) |I801_START , (void *)SMBHSTCNT (priv));
This inb() call looks like a bug. We perform a 64-bit operation when talking to this hardware register everywhere else in this driver. Anyone have more insight into the hardware with which this driver interacts such that they could shed some light on the subject?
Probably a separate issue, but I did notice it as a result of this patch.
Thanks,
Geordan
Quoted 8 lines
-----Original Message-----
From: devel <[email protected]> On Behalf Of Geordan NeukumThis
inb()call looks like a bug. We perform a 64-bit operation when talking to this hardware register everywhere else in this driver. Anyone have more insight into the hardware with which this driver interacts such that they could shed some light on the subject?
That would be me. I looked at the VHDL for the hardware. The registers seem to be aligned to 8 bytes but only use the LS byte of each. So it probably doesn't matter whether the memory transactions are 64-bit or 8-bit.
I know the hardware doesn't support byte-enables either, which is probably why
the registers were padded this way. Probably also why the inb_p and outb_p
macros were redefined.
Quoted 4 lines
Probably a separate issue, but I did notice it as a result of this patch.
Thanks,
Geordan