arm: dts: Stratix10: Enable i2c
PATCH 1/1 arm: dts: Stratix10: Enable i2c
Enable i2c1 in Stratix 10 devkit.
SOCFPGA_STRATIX10 # i2c bus
Bus 0: i2c at ffc02900SOCFPGA_STRATIX10 # i2c dev 0
Setting bus to 0SOCFPGA_STRATIX10 # i2c probe
Valid chip addresses: 14 4C 51 68 74
--- arch/arm/dts/socfpga_stratix10_socdk.dts | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/dts/socfpga_stratix10_socdk.dts +5 -0
@@ -9,6 +9,7 @@ model = "SoCFPGA Stratix 10 SoCDK"; aliases { + i2c0 = &i2c1; serial0 = &uart0; };
@@ -77,6 +78,10 @@ }; }; +&i2c1 { + status = "okay"; +}; + &mmc { status = "okay"; cap-sd-highspeed;
Signature · 1 line
2.19.0
PATCH 1/1 arm: dts: Stratix10: Enable i2c
Quoted 11 lines · Ley Foon Tan
Enable i2c1 in Stratix 10 devkit.
SOCFPGA_STRATIX10# i2c bus
Bus 0: i2c atffc02900SOCFPGA_STRATIX10# i2c dev 0
Setting bus to 0SOCFPGA_STRATIX10# i2c probe
Valid chip addresses: 14 4C 51 68 74Signed-off-by Ley Foon Tan <[email protected]>
Quoted 30 lines
--- arch/arm/dts/socfpga_stratix10_socdk.dts | 5 +++++ 1 file changed, 5 insertions(+)arch/arm/dts/socfpga_stratix10_socdk.dts +5
-1@@ -9,6 +9,7 @@ model = "SoCFPGA Stratix 10 SoCDK"; aliases { + i2c0 = &i2c1; serial0 = &uart0; };@@ -77,6 +78,10 @@ }; }; +&i2c1 { + status = "okay"; +}; + &mmc { status = "okay"; cap-sd-highspeed; --2.19.0
Marek Vasut
AppliedPATCH 1/1 arm: dts: Stratix10: Enable i2c
In reply to Ley Foon TanQuoted 28 lines · Ley Foon Tan
Enable i2c1 in Stratix 10 devkit.
SOCFPGA_STRATIX10# i2c bus
Bus 0: i2c atffc02900SOCFPGA_STRATIX10# i2c dev 0
Setting bus to 0SOCFPGA_STRATIX10# i2c probe
Valid chip addresses: 14 4C 51 68 74Signed-off-by Ley Foon Tan <[email protected]>--- arch/arm/dts/socfpga_stratix10_socdk.dts | 5 +++++ 1 file changed, 5 insertions(+)arch/arm/dts/socfpga_stratix10_socdk.dts +1
-0@@ -9,6 +9,7 @@ model = "SoCFPGA Stratix 10 SoCDK"; aliases { + i2c0 = &i2c1; serial0 = &uart0; };
arch/arm/dts/socfpga_stratix10_socdk.dts line 87
Quoted 10 lines
arch/arm/dts/socfpga_stratix10_socdk.dts +4
-0@@ -77,6 +78,10 @@ }; }; +&i2c1 { + status = "okay"; +}; + &mmc { status = "okay"; cap-sd-highspeed;
Applied, thanks.
Signature · 2 lines
Best regards, Marek Vasut