ath10k: check data ack rssi enabled/disabled in htt rx event
PATCH 1/1 ath10k: check data ack rssi enabled/disabled in htt rx event
From: Abhishek Ambure <[email protected]>
For all data packets trasmmited, host gets htt tx completion event.
QCA9984 firmware gives data ack rssi values to host through htt event of data tx completion. Data ack rssi values are valid if A0 bit is set in HTT rx message.
Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00044
--- drivers/net/wireless/ath/ath10k/hw.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/wireless/ath/ath10k/hw.c +1 -0
@@ -1145,6 +1145,7 @@ static bool ath10k_qca99x0_rx_desc_msdu_limit_error(struct htt_rx_desc *rxd)const struct ath10k_hw_ops qca99x0_ops = { .rx_desc_get_l3_pad_bytes = ath10k_qca99x0_rx_desc_get_l3_pad_bytes, .rx_desc_get_msdu_limit_error = ath10k_qca99x0_rx_desc_msdu_limit_error, + .is_rssi_enable = ath10k_htt_tx_rssi_enable, };const struct ath10k_hw_ops qca6174_ops = {
Signature · 1 line
2.7.4
Quoted 6 lines · Balaji Pothunoori
For all data packets transmitted, host gets htt tx completion event. Some QCA9984 firmware releases support
WMI_SERVICE_TX_DATA_ACK_RSSI, which gives data ack rssi values to host through htt event of data tx completion. Data ack rssi values are valid if A0 bit is set in HTT rx message. So enable the feature also for QCA9884.
Quoted 7 lines
Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00044Signed-off-by Abhishek Ambure <[email protected]>Signed-off-by Balaji Pothunoori <[email protected]>[[email protected]: improve commit log]Signed-off-by Kalle Valo <[email protected]>
Patch applied to ath-next branch of ath.git, thanks.
cc78dc3b7906 ath10k: enable transmit data ack RSSI for QCA9884
Signature · 9 lines
https://patchwork.kernel.org/patch/11021495/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 6 lines · Balaji Pothunoori
For all data packets transmitted, host gets htt tx completion event. Some QCA9984 firmware releases support
WMI_SERVICE_TX_DATA_ACK_RSSI, which gives data ack rssi values to host through htt event of data tx completion. Data ack rssi values are valid if A0 bit is set in HTT rx message. So enable the feature also for QCA9884.
Quoted 7 lines
Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00044Signed-off-by Abhishek Ambure <[email protected]>Signed-off-by Balaji Pothunoori <[email protected]>[[email protected]: improve commit log]Signed-off-by Kalle Valo <[email protected]>
Patch applied to ath-next branch of ath.git, thanks.
cc78dc3b7906 ath10k: enable transmit data ack RSSI for QCA9884
Signature · 3 lines
https://patchwork.kernel.org/patch/11021495/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches