Skip to contentSkip to conversation

YMF754 with front & rear output?

DISCUSSION Adam K Kirchhoff 3 participants 8 messages Feb 19, 2002 – Feb 20, 2002

lore
Share & tools
lore
#1 lore raw

At Mon, 18 Feb 2002 22:45:07 EST (-0500),

Quoted 7 lines · Adam K Kirchhoff

I'm curious if anyone has gotten one of the ymfpci cards to work with

front and rear output with the OSS emulation? Is it even supported at

this point?

(please note i myself didn't test the following:)

the rear pcm assigned to device #2. so at first please check whether the driver really supports rear speakers by playing via hw:0,2, i.e.

	% aplay -Dhw:0,2 foo.wav

if it's ok, please try to add the following option to snd-pcm-oss:

options snd-pcm-oss snd_adsp_map=2

so that hw:0,2 is mapped to /dev/adsp.

The another possibility is to use ALSA OSS wrapper library. You can define like this in your ~/.asoundrc

pcm.adsp0 pcm.rear

then run program via aoss wrapper.

ciao,

Takashi

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

#2 lore raw
Quoted 6 lines · Takashi Iwai

At Mon, 18 Feb 2002 22:45:07 EST (-0500),

Quoted 4 lines · Adam K Kirchhoff

I'm curious if anyone has gotten one of the ymfpci cards to work with

Quoted 8 lines
Quoted 3 lines

front and rear output with the OSS emulation? Is it even supported at

this point?

(please note i myself didn't test the following:)

the rear pcm assigned to device #2. so at first please check whether the driver really supports rear speakers by playing via hw:0,2, i.e.

It does.... Alsa has natively supported both the front and rear channels for a number of months now, iirc.

Quoted 1 line
	% aplay -Dhw:0,2 foo.wav

Yep. That works fine.

One of the first things I'm noticing now, however, is that the only Alsa application that seems to use the rear speakers is aplay, and only when specified. For example, alsaplayer will still only use the front speakers.

Now, is this something that needs to be set up in the .asoundrc file? Is this documented somewhere?

Quoted 5 lines

if it's ok, please try to add the following option to snd-pcm-oss:

options snd-pcm-oss snd_adsp_map=2

so that hw:0,2 is mapped to /dev/adsp.

Done. But what exactly does this give me :-) I hate to seem like an idiot, but my only other experience with the alsa drivers is with a SB Live! With the SB Live!, you don't need to take any extra steps to get both the front and rear channels working. I certainly don't remember having to setup anything for /dev/adsp :-)

I see a couple references to adsp in the alsa-howto, but nothing that really explains how to set it up and use it :-)

Quoted 6 lines

The another possibility is to use ALSA OSS wrapper library. You can define like this in your ~/.asoundrc

pcm.adsp0 pcm.rear

then run program via aoss wrapper.

Is this documented somewhere, too? Searching for "aoss wrapper" in google doesn't turn up anything, and the search mechanism on the Alsa homepage seems to be broken (someone might want to remove it till it gets fixed) :-)

Sorry if I'm coming off as ignorant, but this is the one area where the OSS ymf drivers are superiour to the Alsa drivers, and I'd love to be able to get it working so I can stop having to switch back and forth between the two :-)

Adam

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

#3 lore raw

At Wed, 20 Feb 2002 08:50:23 -0500 (EST),

Quoted 22 lines · Adam K Kirchhoff
Quoted 6 lines · Takashi Iwai

At Mon, 18 Feb 2002 22:45:07 EST (-0500),

Quoted 4 lines · Adam K Kirchhoff

I'm curious if anyone has gotten one of the ymfpci cards to work with

Quoted 8 lines
Quoted 3 lines

front and rear output with the OSS emulation? Is it even supported at

this point?

(please note i myself didn't test the following:)

the rear pcm assigned to device #2. so at first please check whether the driver really supports rear speakers by playing via hw:0,2, i.e.

It does.... Alsa has natively supported both the front and rear channels for a number of months now, iirc.

Quoted 8 lines
Quoted 1 line
	% aplay -Dhw:0,2 foo.wav

Yep. That works fine.

One of the first things I'm noticing now, however, is that the only Alsa application that seems to use the rear speakers is aplay, and only when specified. For example, alsaplayer will still only use the front speakers.

it's a problem of alsaplayer. doesn't work "alsaplayer -d hw:0,2" ?

Quoted 2 lines

Now, is this something that needs to be set up in the .asoundrc file? Is this documented somewhere?

no, you don't need to edit asoundrc.
to the latter question - again - no. no documents, so far.

Quoted 11 lines
Quoted 5 lines

if it's ok, please try to add the following option to snd-pcm-oss:

options snd-pcm-oss snd_adsp_map=2

so that hw:0,2 is mapped to /dev/adsp.

Done. But what exactly does this give me :-) I hate to seem like an idiot, but my only other experience with the alsa drivers is with a SB Live! With the SB Live!, you don't need to take any extra steps to get both the front and rear channels working. I certainly don't remember having to setup anything for /dev/adsp :-)

hmm, i'm not sure whether sb live supports rear outputs on OSS emulation mode.. does it?

Quoted 2 lines

I see a couple references to adsp in the alsa-howto, but nothing that really explains how to set it up and use it :-)

well, this is also not documented.
i'm going to write a brief note later.

Quoted 11 lines
Quoted 6 lines

The another possibility is to use ALSA OSS wrapper library. You can define like this in your ~/.asoundrc

pcm.adsp0 pcm.rear

then run program via aoss wrapper.

Is this documented somewhere, too? Searching for "aoss wrapper" in google doesn't turn up anything, and the search mechanism on the Alsa homepage seems to be broken (someone might want to remove it till it gets fixed) :-)

it's included in alsa-oss package. aoss is a very small wrapper script. there is a man page, so please refer to it.

and, i should answer before you ask; the usage of alsa-oss lib is also almost undocumented :-<

Takashi

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

#4 lore raw
Quoted 26 lines · Takashi Iwai

At Wed, 20 Feb 2002 08:50:23 -0500 (EST),

Quoted 24 lines · Adam K Kirchhoff
Quoted 6 lines · Takashi Iwai

At Mon, 18 Feb 2002 22:45:07 EST (-0500),

Quoted 4 lines · Adam K Kirchhoff

I'm curious if anyone has gotten one of the ymfpci cards to work with

Quoted 8 lines
Quoted 3 lines

front and rear output with the OSS emulation? Is it even supported at

this point?

(please note i myself didn't test the following:)

the rear pcm assigned to device #2. so at first please check whether the driver really supports rear speakers by playing via hw:0,2, i.e.

It does.... Alsa has natively supported both the front and rear channels for a number of months now, iirc.

Quoted 1 line
	% aplay -Dhw:0,2 foo.wav
Quoted 8 lines
Quoted 6 lines

Yep. That works fine.

One of the first things I'm noticing now, however, is that the only Alsa application that seems to use the rear speakers is aplay, and only when specified. For example, alsaplayer will still only use the front speakers.

it's a problem of alsaplayer. doesn't work "alsaplayer -d hw:0,2" ?

Good question... That's something I haven't tried. I'll give it a shot when I get home.

However, here's the thing... alsaplayer uses both the front and rear outputs with the SB Live! by default. No need to specify one or the other.

Now, I understand that since so many more people have SB Live! cards driver development obviously isn't going to focus on the ymfpci cards as much, but I'm curious if this is something that can eventually be enabled? Is it an issue with the yamaha hardware?

Quoted 12 lines
Quoted 2 lines

Now, is this something that needs to be set up in the .asoundrc file? Is this documented somewhere?

no, you don't need to edit asoundrc.
to the latter question - again - no. no documents, so far.

Quoted 6 lines
Quoted 5 lines

if it's ok, please try to add the following option to snd-pcm-oss:

options snd-pcm-oss snd_adsp_map=2

so that hw:0,2 is mapped to /dev/adsp.

Quoted 8 lines
Quoted 5 lines

Done. But what exactly does this give me :-) I hate to seem like an idiot, but my only other experience with the alsa drivers is with a SB Live! With the SB Live!, you don't need to take any extra steps to get both the front and rear channels working. I certainly don't remember having to setup anything for /dev/adsp :-)

hmm, i'm not sure whether sb live supports rear outputs on OSS emulation mode.. does it?

Yes. Every OSS application I've come across (games, video players, audio players, sound editing apps, etc.) is able to use the front and rear outputs at the same time, with the Alsa SB Live drivers, without any extra configuration :-)

Quoted 14 lines
Quoted 2 lines

I see a couple references to adsp in the alsa-howto, but nothing that really explains how to set it up and use it :-)

well, this is also not documented.
i'm going to write a brief note later.

Quoted 7 lines
Quoted 6 lines

The another possibility is to use ALSA OSS wrapper library. You can define like this in your ~/.asoundrc

pcm.adsp0 pcm.rear

then run program via aoss wrapper.

Quoted 7 lines
Quoted 4 lines

Is this documented somewhere, too? Searching for "aoss wrapper" in google doesn't turn up anything, and the search mechanism on the Alsa homepage seems to be broken (someone might want to remove it till it gets fixed) :-)

it's included in alsa-oss package. aoss is a very small wrapper script. there is a man page, so please refer to it.

Cool. I'll take a look when I get home.

Quoted 2 lines

and, i should answer before you ask; the usage of alsa-oss lib is also almost undocumented :-<

lol. I wasn't going to ask...

I have no objection to working on any of this documentation but, of course, I'd need to understand how these things work in the first place :-) I haven't taken a very close look, but is the source code documented well enough to understand these issues?

Adam

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

#5 lore raw
Quoted 41 lines · Adam K Kirchhoff
Quoted 26 lines · Takashi Iwai

At Wed, 20 Feb 2002 08:50:23 -0500 (EST),

Quoted 24 lines · Adam K Kirchhoff
Quoted 6 lines · Takashi Iwai

At Mon, 18 Feb 2002 22:45:07 EST (-0500),

Quoted 4 lines · Adam K Kirchhoff

I'm curious if anyone has gotten one of the ymfpci cards to work with

Quoted 8 lines
Quoted 3 lines

front and rear output with the OSS emulation? Is it even supported at

this point?

(please note i myself didn't test the following:)

the rear pcm assigned to device #2. so at first please check whether the driver really supports rear speakers by playing via hw:0,2, i.e.

It does.... Alsa has natively supported both the front and rear channels for a number of months now, iirc.

Quoted 1 line
	% aplay -Dhw:0,2 foo.wav
Quoted 8 lines
Quoted 6 lines

Yep. That works fine.

One of the first things I'm noticing now, however, is that the only Alsa application that seems to use the rear speakers is aplay, and only when specified. For example, alsaplayer will still only use the front speakers.

it's a problem of alsaplayer. doesn't work "alsaplayer -d hw:0,2" ?

Good question... That's something I haven't tried. I'll give it a shot when I get home.

Quoted 8 lines

However, here's the thing... alsaplayer uses both the front and rear outputs with the SB Live! by default. No need to specify one or the other.

Now, I understand that since so many more people have SB Live! cards driver development obviously isn't going to focus on the ymfpci cards as much, but I'm curious if this is something that can eventually be enabled? Is it an issue with the yamaha hardware?

Yamaha hardware has some contraints. The signal route for rear speakers is shared with the S/PDIF path, so you cannot use them at same time simultaneously. It's no problem for us to add a new control for the rear device (hw:0,2) which can control front speakers as well. We can also invert hw:0,2 and hw:0,0 after that change, so the default working mode will be "use front & rear speakers".

Jaroslav

-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

#6 lore raw
Quoted 47 lines · Jaroslav Kysela
Quoted 45 lines · Adam K Kirchhoff
Quoted 26 lines · Takashi Iwai

At Wed, 20 Feb 2002 08:50:23 -0500 (EST),

Quoted 24 lines · Adam K Kirchhoff
Quoted 6 lines · Takashi Iwai

At Mon, 18 Feb 2002 22:45:07 EST (-0500),

Quoted 4 lines · Adam K Kirchhoff

I'm curious if anyone has gotten one of the ymfpci cards to work with

Quoted 8 lines
Quoted 3 lines

front and rear output with the OSS emulation? Is it even supported at

this point?

(please note i myself didn't test the following:)

the rear pcm assigned to device #2. so at first please check whether the driver really supports rear speakers by playing via hw:0,2, i.e.

It does.... Alsa has natively supported both the front and rear channels for a number of months now, iirc.

Quoted 1 line
	% aplay -Dhw:0,2 foo.wav
Quoted 8 lines
Quoted 6 lines

Yep. That works fine.

One of the first things I'm noticing now, however, is that the only Alsa application that seems to use the rear speakers is aplay, and only when specified. For example, alsaplayer will still only use the front speakers.

it's a problem of alsaplayer. doesn't work "alsaplayer -d hw:0,2" ?

Good question... That's something I haven't tried. I'll give it a shot when I get home.

However, here's the thing... alsaplayer uses both the front and rear outputs with the SB Live! by default. No need to specify one or the other.

Quoted 8 lines
Quoted 4 lines

Now, I understand that since so many more people have SB Live! cards driver development obviously isn't going to focus on the ymfpci cards as much, but I'm curious if this is something that can eventually be enabled? Is it an issue with the yamaha hardware?

Yamaha hardware has some contraints. The signal route for rear speakers is shared with the S/PDIF path, so you cannot use them at same time simultaneously.

That's interesting. I wasn't aware of that. Of course, I've never actually tried to use them at the same time, but that's certainly good to know.

Quoted 4 lines

It's no problem for us to add a new control for the rear device (hw:0,2) which can control front speakers as well. We can also invert hw:0,2 and hw:0,0 after that change, so the default working mode will be "use front & rear speakers".

That would be perfect. I'm curious though, is this also how it's done with the the emu10k1 drivers?

Adam

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

#7 lore raw
Quoted 7 lines · Adam K Kirchhoff
Quoted 4 lines

It's no problem for us to add a new control for the rear device (hw:0,2) which can control front speakers as well. We can also invert hw:0,2 and hw:0,0 after that change, so the default working mode will be "use front & rear speakers".

That would be perfect. I'm curious though, is this also how it's done with the the emu10k1 drivers?

No, it's different hardware.

Jaroslav

-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel