ARM: dts: at91: sama5d27_wlsom1: add hlcdc node
Subsystems (2)
PATCH 1/1 ARM: dts: at91: sama5d27_wlsom1: add hlcdc node
From: Eugen Hristev <[email protected]>
Add node for hlcld for u-boot logo display at boot.
This is compatible with the Precision Design Associates (PDA) TM5000 screen. Timings are compatible with simple panel from Linux, panel name is pda_91_00156_a0
---
This patch depends on previous sent patches on at91-sama5d27_wlsom1_ek board.
arch/arm/dts/at91-sama5d27_wlsom1_ek-u-boot.dtsi | 4 ++ arch/arm/dts/at91-sama5d27_wlsom1_ek.dts | 60 ++++++++++++++++++++++++ configs/sama5d27_wlsom1_ek_mmc_defconfig | 8 ++++ 3 files changed, 72 insertions(+)
arch/arm/dts/at91-sama5d27_wlsom1_ek-u-boot.dtsi +4 -0
@@ -13,6 +13,10 @@ }; }; +&hlcdc { + u-boot,dm-pre-reloc; +}; + &qspi1 { u-boot,dm-pre-reloc; };
arch/arm/dts/at91-sama5d27_wlsom1_ek.dts +60 -0
72 lines not on this page · raw message
configs/sama5d27_wlsom1_ek_mmc_defconfig +8 -0
@@ -85,6 +85,14 @@ CONFIG_DM_SPI=y CONFIG_TIMER=y CONFIG_SPL_TIMER=y CONFIG_ATMEL_PIT_TIMER=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_ATMEL_USBA=y +CONFIG_DM_VIDEO=y +CONFIG_ATMEL_HLCD=y CONFIG_W1=y CONFIG_W1_GPIO=y CONFIG_W1_EEPROM=y
Signature · 1 line
2.7.4
PATCH 1/1 ARM: dts: at91: sama5d27_wlsom1: add hlcdc node
Quoted 9 lines · On 26.08.2019 14:45, Eugen Hristev - M18282 wrote:
From: Eugen Hristev <[email protected]>
Add node for hlcld for u-boot logo display at boot.
This is compatible with the Precision Design Associates (PDA) TM5000 screen. Timings are compatible with simple panel from Linux, panel name ispda_91_00156_a0Signed-off-by Eugen Hristev <[email protected]>---
Applied to u-boot-atmel/next