FAILED: patch "[PATCH] mt76: mt76x0u: do not reset radio on resume" failed to apply to 4.19-stable tree

The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 8f2d163cb26da87e7d8e1677368b8ba1ba4d30b3 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <[email protected]>
Date: Thu, 18 Jul 2019 12:38:10 +0200
Subject: [PATCH] mt76: mt76x0u: do not reset radio on resume

On some machines mt76x0u firmware can hung during resume, what result on messages like below:

[  475.480062] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[  475.990066] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110
[  475.990075] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[  476.500003] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110
[  476.500012] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[  477.010046] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110
[  477.010055] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[  477.529997] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110
[  477.530006] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[  477.824907] mt76x0 1-8:1.0: Error: send MCU cmd failed:-71
[  477.824916] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[  477.825029] usb 1-8: USB disconnect, device number 6

and possible whole system freeze.

This can be avoided, if we do not perform mt76x0_chip_onoff() reset.

index 627ed1fc7b15..645f4d15fb61 100644
@@ -136,11 +136,11 @@ static const struct ieee80211_ops mt76x0u_ops = {
 	.release_buffered_frames = mt76_release_buffered_frames,
 };
 
-static int mt76x0u_init_hardware(struct mt76x02_dev *dev)
+static int mt76x0u_init_hardware(struct mt76x02_dev *dev, bool reset)
 {
 	int err;
 
-	mt76x0_chip_onoff(dev, true, true);
+	mt76x0_chip_onoff(dev, true, reset);
 
 	if (!mt76x02_wait_for_mac(&dev->mt76))
 		return -ETIMEDOUT;

@@ -173,7 +173,7 @@ static int mt76x0u_register_device(struct mt76x02_dev *dev)
 	if (err < 0)
 		goto out_err;
 
-	err = mt76x0u_init_hardware(dev);
+	err = mt76x0u_init_hardware(dev, true);
 	if (err < 0)
 		goto out_err;
 

@@ -309,7 +309,7 @@ static int __maybe_unused mt76x0_resume(struct usb_interface *usb_intf)
 	if (ret < 0)
 		goto err;
 
-	ret = mt76x0u_init_hardware(dev);
+	ret = mt76x0u_init_hardware(dev, false);
 	if (ret)
 		goto err;