patch "usb: xhci: wait for CNR controller not ready bit in xhci resume" added to usb-linus

This is a note to let you know that I've just added the patch titled

usb: xhci: wait for CNR controller not ready bit in xhci resume

to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From a70bcbc322837eda1ab5994d12db941dc9733a7d Mon Sep 17 00:00:00 2001
From: Rick Tseng <[email protected]>
Date: Fri, 4 Oct 2019 14:59:30 +0300
Subject: usb: xhci: wait for CNR controller not ready bit in xhci resume

NVIDIA 3.1 xHCI card would lose power when moving power state into D3Cold. Thus we need to wait for CNR bit to clear in xhci resume, just as in xhci init.

---
 drivers/usb/host/xhci.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

index aec69d294973..fe8f9ff58015 100644
@@ -1108,6 +1108,18 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		hibernated = true;
 
 	if (!hibernated) {
+		/*
+		 * Some controllers might lose power during suspend, so wait
+		 * for controller not ready bit to clear, just as in xHC init.
+		 */
+		retval = xhci_handshake(&xhci->op_regs->status,
+					STS_CNR, 0, 10 * 1000 * 1000);
+		if (retval) {
+			xhci_warn(xhci, "Controller not ready at resume %d\n",
+				  retval);
+			spin_unlock_irq(&xhci->lock);
+			return retval;
+		}
 		/* step 1: restore register */
 		xhci_restore_registers(xhci);
 		/* step 2: initialize command ring buffer */

2.23.0