lshw package not getting added to the resulting image
I wanna run lshw from my resulting image,
I have selected hwdata but lshw pacakge is not getting added to output/build after the compilation is over.
--
Sent from: http://buildroot-busybox.2317881.n4.nabble.com/
Hello Anushka,
Quoted 3 lines · On Wed, 13 Nov 2019 05:41:55 -0600 (CST), a <[email protected]> wrote:
I wanna run lshw from my resulting image,
I have selected hwdata but lshw pacakge is not getting added to output/build after the compilation is over.
Why do you believe the command 'lshw' is in the selected package hwdata? Try package lshw (BR2_PACKAGE_LSHW=y) instead...
Regards,
Peter
Quoted 9 lines
--
Sent from: http://buildroot-busybox.2317881.n4.nabble.com/
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Actually I can't find BR2_PACKAGE_LSHW variable in .config file as it is not visible in buildroot config tool under hardware handling packages. Can't figure out why?
I tried setting BR2_PACKAGE_LSHW=y manually, it doesn't seem to work!
--
Sent from: http://buildroot-busybox.2317881.n4.nabble.com/
Hello Anushka,
Quoted 4 lines · On Thu, 14 Nov 2019 01:29:47 -0600 (CST), a <[email protected]> wrote:
Actually I can't find
BR2_PACKAGE_LSHWvariable in .config file as it is not visible in buildroot config tool under hardware handling packages. Can't figure out why?
I tried setting BR2_PACKAGE_LSHW=y manually, it doesn't seem to work!
According to git log the lshw package was added 2012..., which buildroot version do you use?
If in doubt, attach your .config file...
Regards,
Peter
Quoted 9 lines
--
Sent from: http://buildroot-busybox.2317881.n4.nabble.com/
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Hi!
I'm using buildroot-2019.02.6
PFA .config file and build.log
*.config file* is the file before I set BR2_PACKAGE_LSHW=y, and
*build.log file* is the log after I set BR2_PACKAGE_LSHW=y and now it's showing the following error while building lshw B.02.18 package:
make[1]:/root/buildroot-hello/output/host/bin/x86_64-buildroot-linux-uclibc-g++:
Command not found
make[1]: *** [lshw.o] Error 127
make[1]: *** Waiting for unfinished jobs....
make[2]: Entering directory `/root/buildroot-hello/output/build/lshw-B.02.18/src/core' /root/buildroot-hello/output/host/bin/x86_64-buildroot-linux-uclibc-g++ -g -Wall -g -I./core/ -DPREFIX=\"/usr\" -DSBINDIR=\"/usr/sbin\" -DMANDIR=\"/usr/share/man\" -DDATADIR=\"/usr/share\" -D_LARGEFILE_SOURCE
-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c hw.cc -o hw.o
make[2]:/root/buildroot-hello/output/host/bin/x86_64-buildroot-linux-uclibc-g++:
Command not found
make[2]: *** [hw.o] Error 127
make[2]: Leaving directory `/root/buildroot-hello/output/build/lshw-B.02.18/src/core' make[1]: *** [core] Error 2
make[1]: Leaving directory `/root/buildroot-hello/output/build/lshw-B.02.18/src'
make: *** [/root/buildroot-hello/output/build/lshw-B.02.18/.stamp_built] Error 2
--
Sent from: http://buildroot-busybox.2317881.n4.nabble.com/
Hello,
Quoted 9 lines · On Thu, 14 Nov 2019 23:13:39 -0600 (CST), a <[email protected]> wrote:
Hi!
I'm using buildroot-2019.02.6
PFA .config file and build.log
*.config file* is the file before I set BR2_PACKAGE_LSHW=y, and
*build.log file* is the log after I set BR2_PACKAGE_LSHW=y and now it's
Sorry, no config/build.log files attached to the e-mail...
Regards,
Peter
Quoted 33 lines
showing the following error while building lshw B.02.18 package:
make[1]:/root/buildroot-hello/output/host/bin/x86_64-buildroot-linux-uclibc-g++:
Command not found
make[1]: *** [lshw.o] Error 127
make[1]: *** Waiting for unfinished jobs....
make[2]: Entering directory `/root/buildroot-hello/output/build/lshw-B.02.18/src/core'/root/buildroot-hello/output/host/bin/x86_64-buildroot-linux-uclibc-g++-g(quoted diff) +0
-3-Wall -g -I./core/ -DPREFIX=\"/usr\" -DSBINDIR=\"/usr/sbin\" -DMANDIR=\"/usr/share/man\" -DDATADIR=\"/usr/share\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c hw.cc -o hw.omake[2]:
/root/buildroot-hello/output/host/bin/x86_64-buildroot-linux-uclibc-g++:
Command not found
make[2]: *** [hw.o] Error 127
make[2]: Leaving directory `/root/buildroot-hello/output/build/lshw-B.02.18/src/core' make[1]: *** [core] Error 2
make[1]: Leaving directory `/root/buildroot-hello/output/build/lshw-B.02.18/src'
make: *** [/root/buildroot-hello/output/build/lshw-B.02.18/.stamp_built] Error 2--
Sent from: http://buildroot-busybox.2317881.n4.nabble.com/
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Quoted 20 lines · Peter Seiderer
Hello,
Quoted 9 lines · On Thu, 14 Nov 2019 23:13:39 -0600 (CST), a <[email protected]> wrote:
Hi!
I'm using buildroot-2019.02.6
PFA .config file and build.log
*.config file* is the file before I set BR2_PACKAGE_LSHW=y, and
*build.log file* is the log after I set BR2_PACKAGE_LSHW=y and now it's
Sorry, no config/build.log files attached to the e-mail...
Regards,
Peter
Quoted 15 lines
Quoted 12 lines
showing the following error while building lshw B.02.18 package:
make[1]:/root/buildroot-hello/output/host/bin/x86_64-buildroot-linux-uclibc-g++:
Command not found
make[1]: *** [lshw.o] Error 127
make[1]: *** Waiting for unfinished jobs....
make[2]: Entering directory `/root/buildroot-hello/output/build/lshw-B.02.18/src/core'/root/buildroot-hello/output/host/bin/x86_64-buildroot-linux-uclibc-g++-g(quoted diff) +0
-3-Wall -g -I./core/ -DPREFIX=\"/usr\" -DSBINDIR=\"/usr/sbin\" -DMANDIR=\"/usr/share/man\" -DDATADIR=\"/usr/share\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c hw.cc -o hw.oQuoted 3 lines
make[2]:
/root/buildroot-hello/output/host/bin/x86_64-buildroot-linux-uclibc-g++:
Command not found
Your toolchain does not have C++
Signature · 1 line
Carlos Santos <[email protected]>
Hello,
Quoted 30 lines · Carlos Santos
Quoted 29 lines · Peter Seiderer
Hello,
Quoted 9 lines · On Thu, 14 Nov 2019 23:13:39 -0600 (CST), a <[email protected]> wrote:
Hi!
I'm using buildroot-2019.02.6
PFA .config file and build.log
*.config file* is the file before I set BR2_PACKAGE_LSHW=y, and
*build.log file* is the log after I set BR2_PACKAGE_LSHW=y and now it's
Sorry, no config/build.log files attached to the e-mail...
Regards,
PeterQuoted 9 lines
showing the following error while building lshw B.02.18 package:
make[1]:/root/buildroot-hello/output/host/bin/x86_64-buildroot-linux-uclibc-g++:
Command not found
make[1]: *** [lshw.o] Error 127
make[1]: *** Waiting for unfinished jobs....
make[2]: Entering directory `/root/buildroot-hello/output/build/lshw-B.02.18/src/core'/root/buildroot-hello/output/host/bin/x86_64-buildroot-linux-uclibc-g++-g
Quoted 9 lines
Quoted 6 lines
Quoted 6 lines
(quoted diff) +0
-3-Wall -g -I./core/ -DPREFIX=\"/usr\" -DSBINDIR=\"/usr/sbin\" -DMANDIR=\"/usr/share/man\" -DDATADIR=\"/usr/share\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c hw.cc -o hw.omake[2]:
/root/buildroot-hello/output/host/bin/x86_64-buildroot-linux-uclibc-g++:
Command not foundYour toolchain does not have C++
In case you changed your .config already to enable C++, a full re-build will maybe fix the problem, see [1] for details...
Regards,
Peter
Hey!
Thanks Peter and unixmania!
It's working now after enabling C++ support.
--
Sent from: http://buildroot-busybox.2317881.n4.nabble.com/