XCdroast/cdrecord crashes kernel 2.4.18 when mastering on the fly
When backing up a partition on the fly, XCdroast/cdrecord crashed (which is forgiveable) but it also crashed my Linux system (which is not). System and consoles were totally unresponsive, requiring a dreaded unclean reboot.
Joerg schilling (maintainer of cdrecord) suggests problem is with Linux kernel and not with 'cdrecord'
Any thoughts on what might be going on?
Note that mastering-on-the-fly seemed to work OK if I just backed up a couple of very large tar files, while the crashes seem to occur when backing up a partition with multiple files. This difference is
explained perhaps by the extra overload of mastering multiple
small files vs. a few large tar files.
My system setup is as follows:
* Brand new 24x10x40 Hi-Val CDR
* CD recording software
cdrtools-cdda2wav-1.11a23-1.i386.rpm
cdrtools-mkisofs-1.11a23-1.i386.rpm
cdrtools-cdrecord-1.11a23-1.i386.rpm
cdrtools-devel-1.11a23-1.i386.rpm
xcdroast-0.98alpha10-1.i386.rpm * Relatively pristine RH 7.3 running kernel 2.4.18
* System hardware is a bit old and slow (Pentium 200 MHz Overdrive in an old P100 Intel Aladding/Zappa PCI Motherboard)
Even with the older system hardware, I would hope that we could get Xcdroast/cdrecord to at least die gracefully if things are too slow to master on-the-fly.
Thanks,
Jeff