Skip to contentSkip to conversation

fpga: dfl: support multiple opens on feature device node.

PATCH Applied Xu Yilun 3 participants 8 messages Nov 18, 2019 – Feb 21, 2020

Subsystems (2)

v1 of 2 Applied Latest is v2 →

lore
Share & tools
lore

Xu Yilun

author maintainer
#0 lore raw

PATCH 1/1 fpga: dfl: support multiple opens on feature device node.

Each DFL functional block, e.g. AFU (Accelerated Function Unit) and FME (FPGA Management Engine), could implement more than one function within its region, but current driver only allows one user application to access it by exclusive open on device node. So this is not convenient and flexible for userspace applications, as they have to combine lots of different functions into one single application.

This patch removes the limitation here to allow multiple opens to each feature device node for AFU and FME from userspace applications. If user still needs exclusive access to these device node, O_EXCL flag must be issued together with open.

---
 drivers/fpga/dfl-afu-main.c | 26 +++++++++++++++-----------
 drivers/fpga/dfl-fme-main.c | 19 ++++++++++++-------
 drivers/fpga/dfl.c          | 15 +++++++++++++--
 drivers/fpga/dfl.h          | 35 +++++++++++++++++++++++++++--------
 4 files changed, 67 insertions(+), 28 deletions(-)
drivers/fpga/dfl-afu-main.c +15 -11
index e4a34dc..c6e0e07 100644
@@ -561,14 +561,16 @@ static int afu_open(struct inode *inode, struct file *filp)
 	if (WARN_ON(!pdata))
 		return -ENODEV;
 
-	ret = dfl_feature_dev_use_begin(pdata);
-	if (ret)
-		return ret;
-
-	dev_dbg(&fdev->dev, "Device File Open\n");
-	filp->private_data = fdev;
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, filp->f_flags & O_EXCL);
+	if (!ret) {
+		dev_dbg(&fdev->dev, "Device File Opened %d Times\n",
+			dfl_feature_dev_use_count(pdata));
+		filp->private_data = fdev;
+	}
+	mutex_unlock(&pdata->lock);
 
-	return 0;
+	return ret;
 }
 
 static int afu_release(struct inode *inode, struct file *filp)
@@ -581,12 +583,14 @@ static int afu_release(struct inode *inode, struct file *filp)
 	pdata = dev_get_platdata(&pdev->dev);
 
 	mutex_lock(&pdata->lock);
-	__port_reset(pdev);
-	afu_dma_region_destroy(pdata);
-	mutex_unlock(&pdata->lock);
-
 	dfl_feature_dev_use_end(pdata);
 
+	if (!dfl_feature_dev_use_count(pdata)) {
+		__port_reset(pdev);
+		afu_dma_region_destroy(pdata);
+	}
+	mutex_unlock(&pdata->lock);
+
 	return 0;
 }
 
drivers/fpga/dfl-fme-main.c +12 -7
index 7c930e6..fda8623 100644
@@ -600,14 +600,16 @@ static int fme_open(struct inode *inode, struct file *filp)
 	if (WARN_ON(!pdata))
 		return -ENODEV;
 
-	ret = dfl_feature_dev_use_begin(pdata);
-	if (ret)
-		return ret;
-
-	dev_dbg(&fdev->dev, "Device File Open\n");
-	filp->private_data = pdata;
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, filp->f_flags & O_EXCL);
+	if (!ret) {
+		dev_dbg(&fdev->dev, "Device File Opened %d Times\n",
+			dfl_feature_dev_use_count(pdata));
+		filp->private_data = pdata;
+	}
+	mutex_unlock(&pdata->lock);
 
-	return 0;
+	return ret;
 }
 
 static int fme_release(struct inode *inode, struct file *filp)
@@ -616,7 +618,10 @@ static int fme_release(struct inode *inode, struct file *filp)
 	struct platform_device *pdev = pdata->dev;
 
 	dev_dbg(&pdev->dev, "Device File Release\n");
+
+	mutex_lock(&pdata->lock);
 	dfl_feature_dev_use_end(pdata);
+	mutex_unlock(&pdata->lock);
 
 	return 0;
 }
drivers/fpga/dfl.c +13 -2
index 96a2b82..9909948 100644
@@ -1079,6 +1079,7 @@ static int __init dfl_fpga_init(void)
  */
 int dfl_fpga_cdev_release_port(struct dfl_fpga_cdev *cdev, int port_id)
 {
+	struct dfl_feature_platform_data *pdata;
 	struct platform_device *port_pdev;
 	int ret = -ENODEV;
 
@@ -1093,7 +1094,11 @@ int dfl_fpga_cdev_release_port(struct dfl_fpga_cdev *cdev, int port_id)
 		goto put_dev_exit;
 	}
 
-	ret = dfl_feature_dev_use_begin(dev_get_platdata(&port_pdev->dev));
+	pdata = dev_get_platdata(&port_pdev->dev);
+
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, true);
+	mutex_unlock(&pdata->lock);
 	if (ret)
 		goto put_dev_exit;
 
@@ -1120,6 +1125,7 @@ EXPORT_SYMBOL_GPL(dfl_fpga_cdev_release_port);
  */
 int dfl_fpga_cdev_assign_port(struct dfl_fpga_cdev *cdev, int port_id)
 {
+	struct dfl_feature_platform_data *pdata;
 	struct platform_device *port_pdev;
 	int ret = -ENODEV;
 
@@ -1138,7 +1144,12 @@ int dfl_fpga_cdev_assign_port(struct dfl_fpga_cdev *cdev, int port_id)
 	if (ret)
 		goto put_dev_exit;
 
-	dfl_feature_dev_use_end(dev_get_platdata(&port_pdev->dev));
+	pdata = dev_get_platdata(&port_pdev->dev);
+
+	mutex_lock(&pdata->lock);
+	dfl_feature_dev_use_end(pdata);
+	mutex_unlock(&pdata->lock);
+
 	cdev->released_port_num--;
 put_dev_exit:
 	put_device(&port_pdev->dev);
drivers/fpga/dfl.h +27 -8
index 9f0e656..4a9a33c 100644
@@ -205,8 +205,6 @@ struct dfl_feature {
 	const struct dfl_feature_ops *ops;
 };
 
-#define DEV_STATUS_IN_USE	0
-
 #define FEATURE_DEV_ID_UNUSED	(-1)
 
 /**
@@ -219,8 +217,9 @@ struct dfl_feature {
  * @dfl_cdev: ptr to container device.
  * @id: id used for this feature device.
  * @disable_count: count for port disable.
+ * @excl_open: set on feature device exclusive open.
+ * @open_count: count for feature device open.
  * @num: number for sub features.
- * @dev_status: dev status (e.g. DEV_STATUS_IN_USE).
  * @private: ptr to feature dev private data.
  * @features: sub features of this feature dev.
  */
@@ -232,26 +231,46 @@ struct dfl_feature_platform_data {
 	struct dfl_fpga_cdev *dfl_cdev;
 	int id;
 	unsigned int disable_count;
-	unsigned long dev_status;
+	bool excl_open;
+	int open_count;
 	void *private;
 	int num;
 	struct dfl_feature features[0];
 };
 
 static inline
-int dfl_feature_dev_use_begin(struct dfl_feature_platform_data *pdata)
+int dfl_feature_dev_use_begin(struct dfl_feature_platform_data *pdata,
+			      bool excl)
 {
-	/* Test and set IN_USE flags to ensure file is exclusively used */
-	if (test_and_set_bit_lock(DEV_STATUS_IN_USE, &pdata->dev_status))
+	if (pdata->excl_open)
 		return -EBUSY;
 
+	if (excl) {
+		if (pdata->open_count)
+			return -EBUSY;
+
+		pdata->excl_open = true;
+	}
+	pdata->open_count++;
+
 	return 0;
 }
 
 static inline
 void dfl_feature_dev_use_end(struct dfl_feature_platform_data *pdata)
 {
-	clear_bit_unlock(DEV_STATUS_IN_USE, &pdata->dev_status);
+	pdata->excl_open = false;
+
+	if (WARN_ON(pdata->open_count <= 0))
+		return;
+
+	pdata->open_count--;
+}
+
+static inline
+int dfl_feature_dev_use_count(struct dfl_feature_platform_data *pdata)
+{
+	return pdata->open_count;
 }
 
 static inline
Signature · 1 line
2.7.4
#1 lore raw

Hi Moritz,

Could you please help us on review this patch when you have time? Thanks in advance. :)

BTW: This patch was made by Yilun and me, and we already performed some review cycles internally before this submission.

Hao

Quoted 232 lines · Xu Yilun

Each DFL functional block, e.g. AFU (Accelerated Function Unit) and FME (FPGA Management Engine), could implement more than one function within its region, but current driver only allows one user application to access it by exclusive open on device node. So this is not convenient and flexible for userspace applications, as they have to combine lots of different functions into one single application.

This patch removes the limitation here to allow multiple opens to each feature device node for AFU and FME from userspace applications. If user still needs exclusive access to these device node, O_EXCL flag must be issued together with open.

---
 drivers/fpga/dfl-afu-main.c | 26 +++++++++++++++-----------
 drivers/fpga/dfl-fme-main.c | 19 ++++++++++++-------
 drivers/fpga/dfl.c          | 15 +++++++++++++--
 drivers/fpga/dfl.h          | 35 +++++++++++++++++++++++++++--------
 4 files changed, 67 insertions(+), 28 deletions(-)
drivers/fpga/dfl-afu-main.c +15 -11
index e4a34dc..c6e0e07 100644
@@ -561,14 +561,16 @@ static int afu_open(struct inode *inode, struct file *filp)
 	if (WARN_ON(!pdata))
 		return -ENODEV;
 
-	ret = dfl_feature_dev_use_begin(pdata);
-	if (ret)
-		return ret;
-
-	dev_dbg(&fdev->dev, "Device File Open\n");
-	filp->private_data = fdev;
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, filp->f_flags & O_EXCL);
+	if (!ret) {
+		dev_dbg(&fdev->dev, "Device File Opened %d Times\n",
+			dfl_feature_dev_use_count(pdata));
+		filp->private_data = fdev;
+	}
+	mutex_unlock(&pdata->lock);
 
-	return 0;
+	return ret;
 }
 
 static int afu_release(struct inode *inode, struct file *filp)
@@ -581,12 +583,14 @@ static int afu_release(struct inode *inode, struct file *filp)
 	pdata = dev_get_platdata(&pdev->dev);
 
 	mutex_lock(&pdata->lock);
-	__port_reset(pdev);
-	afu_dma_region_destroy(pdata);
-	mutex_unlock(&pdata->lock);
-
 	dfl_feature_dev_use_end(pdata);
 
+	if (!dfl_feature_dev_use_count(pdata)) {
+		__port_reset(pdev);
+		afu_dma_region_destroy(pdata);
+	}
+	mutex_unlock(&pdata->lock);
+
 	return 0;
 }
 
drivers/fpga/dfl-fme-main.c +12 -7
index 7c930e6..fda8623 100644
@@ -600,14 +600,16 @@ static int fme_open(struct inode *inode, struct file *filp)
 	if (WARN_ON(!pdata))
 		return -ENODEV;
 
-	ret = dfl_feature_dev_use_begin(pdata);
-	if (ret)
-		return ret;
-
-	dev_dbg(&fdev->dev, "Device File Open\n");
-	filp->private_data = pdata;
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, filp->f_flags & O_EXCL);
+	if (!ret) {
+		dev_dbg(&fdev->dev, "Device File Opened %d Times\n",
+			dfl_feature_dev_use_count(pdata));
+		filp->private_data = pdata;
+	}
+	mutex_unlock(&pdata->lock);
 
-	return 0;
+	return ret;
 }
 
 static int fme_release(struct inode *inode, struct file *filp)
@@ -616,7 +618,10 @@ static int fme_release(struct inode *inode, struct file *filp)
 	struct platform_device *pdev = pdata->dev;
 
 	dev_dbg(&pdev->dev, "Device File Release\n");
+
+	mutex_lock(&pdata->lock);
 	dfl_feature_dev_use_end(pdata);
+	mutex_unlock(&pdata->lock);
 
 	return 0;
 }
drivers/fpga/dfl.c +13 -2
index 96a2b82..9909948 100644
@@ -1079,6 +1079,7 @@ static int __init dfl_fpga_init(void)
  */
 int dfl_fpga_cdev_release_port(struct dfl_fpga_cdev *cdev, int port_id)
 {
+	struct dfl_feature_platform_data *pdata;
 	struct platform_device *port_pdev;
 	int ret = -ENODEV;
 
@@ -1093,7 +1094,11 @@ int dfl_fpga_cdev_release_port(struct dfl_fpga_cdev *cdev, int port_id)
 		goto put_dev_exit;
 	}
 
-	ret = dfl_feature_dev_use_begin(dev_get_platdata(&port_pdev->dev));
+	pdata = dev_get_platdata(&port_pdev->dev);
+
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, true);
+	mutex_unlock(&pdata->lock);
 	if (ret)
 		goto put_dev_exit;
 
@@ -1120,6 +1125,7 @@ EXPORT_SYMBOL_GPL(dfl_fpga_cdev_release_port);
  */
 int dfl_fpga_cdev_assign_port(struct dfl_fpga_cdev *cdev, int port_id)
 {
+	struct dfl_feature_platform_data *pdata;
 	struct platform_device *port_pdev;
 	int ret = -ENODEV;
 
@@ -1138,7 +1144,12 @@ int dfl_fpga_cdev_assign_port(struct dfl_fpga_cdev *cdev, int port_id)
 	if (ret)
 		goto put_dev_exit;
 
-	dfl_feature_dev_use_end(dev_get_platdata(&port_pdev->dev));
+	pdata = dev_get_platdata(&port_pdev->dev);
+
+	mutex_lock(&pdata->lock);
+	dfl_feature_dev_use_end(pdata);
+	mutex_unlock(&pdata->lock);
+
 	cdev->released_port_num--;
 put_dev_exit:
 	put_device(&port_pdev->dev);
drivers/fpga/dfl.h +27 -8
index 9f0e656..4a9a33c 100644
@@ -205,8 +205,6 @@ struct dfl_feature {
 	const struct dfl_feature_ops *ops;
 };
 
-#define DEV_STATUS_IN_USE	0
-
 #define FEATURE_DEV_ID_UNUSED	(-1)
 
 /**
@@ -219,8 +217,9 @@ struct dfl_feature {
  * @dfl_cdev: ptr to container device.
  * @id: id used for this feature device.
  * @disable_count: count for port disable.
+ * @excl_open: set on feature device exclusive open.
+ * @open_count: count for feature device open.
  * @num: number for sub features.
- * @dev_status: dev status (e.g. DEV_STATUS_IN_USE).
  * @private: ptr to feature dev private data.
  * @features: sub features of this feature dev.
  */
@@ -232,26 +231,46 @@ struct dfl_feature_platform_data {
 	struct dfl_fpga_cdev *dfl_cdev;
 	int id;
 	unsigned int disable_count;
-	unsigned long dev_status;
+	bool excl_open;
+	int open_count;
 	void *private;
 	int num;
 	struct dfl_feature features[0];
 };
 
 static inline
-int dfl_feature_dev_use_begin(struct dfl_feature_platform_data *pdata)
+int dfl_feature_dev_use_begin(struct dfl_feature_platform_data *pdata,
+			      bool excl)
 {
-	/* Test and set IN_USE flags to ensure file is exclusively used */
-	if (test_and_set_bit_lock(DEV_STATUS_IN_USE, &pdata->dev_status))
+	if (pdata->excl_open)
 		return -EBUSY;
 
+	if (excl) {
+		if (pdata->open_count)
+			return -EBUSY;
+
+		pdata->excl_open = true;
+	}
+	pdata->open_count++;
+
 	return 0;
 }
 
 static inline
 void dfl_feature_dev_use_end(struct dfl_feature_platform_data *pdata)
 {
-	clear_bit_unlock(DEV_STATUS_IN_USE, &pdata->dev_status);
+	pdata->excl_open = false;
+
+	if (WARN_ON(pdata->open_count <= 0))
+		return;
+
+	pdata->open_count--;
+}
+
+static inline
+int dfl_feature_dev_use_count(struct dfl_feature_platform_data *pdata)
+{
+	return pdata->open_count;
 }
 
 static inline
Signature · 1 line
2.7.4
author maintainer
#2 lore raw

Hi Moritz,

Could you please also help us on reviewing this patch when you have time?

We are working on more DFL improvements like this shared open patch, also interrupt support and some DFL framework changes are ongoing. So it would be appreciated we have some feedback for the prepared ones and not diverge too much for our further developing.

Thanks in advance. :)

Quoted 243 lines · Wu Hao

Hi Moritz,

Could you please help us on review this patch when you have time? Thanks in advance. :)

BTW: This patch was made by Yilun and me, and we already performed some review cycles internally before this submission.

Hao

Quoted 232 lines · Xu Yilun

Each DFL functional block, e.g. AFU (Accelerated Function Unit) and FME (FPGA Management Engine), could implement more than one function within its region, but current driver only allows one user application to access it by exclusive open on device node. So this is not convenient and flexible for userspace applications, as they have to combine lots of different functions into one single application.

This patch removes the limitation here to allow multiple opens to each feature device node for AFU and FME from userspace applications. If user still needs exclusive access to these device node, O_EXCL flag must be issued together with open.

---
 drivers/fpga/dfl-afu-main.c | 26 +++++++++++++++-----------
 drivers/fpga/dfl-fme-main.c | 19 ++++++++++++-------
 drivers/fpga/dfl.c          | 15 +++++++++++++--
 drivers/fpga/dfl.h          | 35 +++++++++++++++++++++++++++--------
 4 files changed, 67 insertions(+), 28 deletions(-)
drivers/fpga/dfl-afu-main.c +15 -11
index e4a34dc..c6e0e07 100644
@@ -561,14 +561,16 @@ static int afu_open(struct inode *inode, struct file *filp)
 	if (WARN_ON(!pdata))
 		return -ENODEV;
 
-	ret = dfl_feature_dev_use_begin(pdata);
-	if (ret)
-		return ret;
-
-	dev_dbg(&fdev->dev, "Device File Open\n");
-	filp->private_data = fdev;
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, filp->f_flags & O_EXCL);
+	if (!ret) {
+		dev_dbg(&fdev->dev, "Device File Opened %d Times\n",
+			dfl_feature_dev_use_count(pdata));
+		filp->private_data = fdev;
+	}
+	mutex_unlock(&pdata->lock);
 
-	return 0;
+	return ret;
 }
 
 static int afu_release(struct inode *inode, struct file *filp)
@@ -581,12 +583,14 @@ static int afu_release(struct inode *inode, struct file *filp)
 	pdata = dev_get_platdata(&pdev->dev);
 
 	mutex_lock(&pdata->lock);
-	__port_reset(pdev);
-	afu_dma_region_destroy(pdata);
-	mutex_unlock(&pdata->lock);
-
 	dfl_feature_dev_use_end(pdata);
 
+	if (!dfl_feature_dev_use_count(pdata)) {
+		__port_reset(pdev);
+		afu_dma_region_destroy(pdata);
+	}
+	mutex_unlock(&pdata->lock);
+
 	return 0;
 }
 
drivers/fpga/dfl-fme-main.c +12 -7
index 7c930e6..fda8623 100644
@@ -600,14 +600,16 @@ static int fme_open(struct inode *inode, struct file *filp)
 	if (WARN_ON(!pdata))
 		return -ENODEV;
 
-	ret = dfl_feature_dev_use_begin(pdata);
-	if (ret)
-		return ret;
-
-	dev_dbg(&fdev->dev, "Device File Open\n");
-	filp->private_data = pdata;
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, filp->f_flags & O_EXCL);
+	if (!ret) {
+		dev_dbg(&fdev->dev, "Device File Opened %d Times\n",
+			dfl_feature_dev_use_count(pdata));
+		filp->private_data = pdata;
+	}
+	mutex_unlock(&pdata->lock);
 
-	return 0;
+	return ret;
 }
 
 static int fme_release(struct inode *inode, struct file *filp)
@@ -616,7 +618,10 @@ static int fme_release(struct inode *inode, struct file *filp)
 	struct platform_device *pdev = pdata->dev;
 
 	dev_dbg(&pdev->dev, "Device File Release\n");
+
+	mutex_lock(&pdata->lock);
 	dfl_feature_dev_use_end(pdata);
+	mutex_unlock(&pdata->lock);
 
 	return 0;
 }
drivers/fpga/dfl.c +13 -2
index 96a2b82..9909948 100644
@@ -1079,6 +1079,7 @@ static int __init dfl_fpga_init(void)
  */
 int dfl_fpga_cdev_release_port(struct dfl_fpga_cdev *cdev, int port_id)
 {
+	struct dfl_feature_platform_data *pdata;
 	struct platform_device *port_pdev;
 	int ret = -ENODEV;
 
@@ -1093,7 +1094,11 @@ int dfl_fpga_cdev_release_port(struct dfl_fpga_cdev *cdev, int port_id)
 		goto put_dev_exit;
 	}
 
-	ret = dfl_feature_dev_use_begin(dev_get_platdata(&port_pdev->dev));
+	pdata = dev_get_platdata(&port_pdev->dev);
+
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, true);
+	mutex_unlock(&pdata->lock);
 	if (ret)
 		goto put_dev_exit;
 
@@ -1120,6 +1125,7 @@ EXPORT_SYMBOL_GPL(dfl_fpga_cdev_release_port);
  */
 int dfl_fpga_cdev_assign_port(struct dfl_fpga_cdev *cdev, int port_id)
 {
+	struct dfl_feature_platform_data *pdata;
 	struct platform_device *port_pdev;
 	int ret = -ENODEV;
 
@@ -1138,7 +1144,12 @@ int dfl_fpga_cdev_assign_port(struct dfl_fpga_cdev *cdev, int port_id)
 	if (ret)
 		goto put_dev_exit;
 
-	dfl_feature_dev_use_end(dev_get_platdata(&port_pdev->dev));
+	pdata = dev_get_platdata(&port_pdev->dev);
+
+	mutex_lock(&pdata->lock);
+	dfl_feature_dev_use_end(pdata);
+	mutex_unlock(&pdata->lock);
+
 	cdev->released_port_num--;
 put_dev_exit:
 	put_device(&port_pdev->dev);
drivers/fpga/dfl.h +27 -8
index 9f0e656..4a9a33c 100644
@@ -205,8 +205,6 @@ struct dfl_feature {
 	const struct dfl_feature_ops *ops;
 };
 
-#define DEV_STATUS_IN_USE	0
-
 #define FEATURE_DEV_ID_UNUSED	(-1)
 
 /**
@@ -219,8 +217,9 @@ struct dfl_feature {
  * @dfl_cdev: ptr to container device.
  * @id: id used for this feature device.
  * @disable_count: count for port disable.
+ * @excl_open: set on feature device exclusive open.
+ * @open_count: count for feature device open.
  * @num: number for sub features.
- * @dev_status: dev status (e.g. DEV_STATUS_IN_USE).
  * @private: ptr to feature dev private data.
  * @features: sub features of this feature dev.
  */
@@ -232,26 +231,46 @@ struct dfl_feature_platform_data {
 	struct dfl_fpga_cdev *dfl_cdev;
 	int id;
 	unsigned int disable_count;
-	unsigned long dev_status;
+	bool excl_open;
+	int open_count;
 	void *private;
 	int num;
 	struct dfl_feature features[0];
 };
 
 static inline
-int dfl_feature_dev_use_begin(struct dfl_feature_platform_data *pdata)
+int dfl_feature_dev_use_begin(struct dfl_feature_platform_data *pdata,
+			      bool excl)
 {
-	/* Test and set IN_USE flags to ensure file is exclusively used */
-	if (test_and_set_bit_lock(DEV_STATUS_IN_USE, &pdata->dev_status))
+	if (pdata->excl_open)
 		return -EBUSY;
 
+	if (excl) {
+		if (pdata->open_count)
+			return -EBUSY;
+
+		pdata->excl_open = true;
+	}
+	pdata->open_count++;
+
 	return 0;
 }
 
 static inline
 void dfl_feature_dev_use_end(struct dfl_feature_platform_data *pdata)
 {
-	clear_bit_unlock(DEV_STATUS_IN_USE, &pdata->dev_status);
+	pdata->excl_open = false;
+
+	if (WARN_ON(pdata->open_count <= 0))
+		return;
+
+	pdata->open_count--;
+}
+
+static inline
+int dfl_feature_dev_use_count(struct dfl_feature_platform_data *pdata)
+{
+	return pdata->open_count;
 }
 
 static inline
Signature · 1 line
2.7.4
maintainer
#3 lore raw
In reply to Xu Yilun

Hi Xu,

Sorry for the delay.

Quoted 6 lines · Xu Yilun

Each DFL functional block, e.g. AFU (Accelerated Function Unit) and FME (FPGA Management Engine), could implement more than one function within its region, but current driver only allows one user application to access it by exclusive open on device node. So this is not convenient and flexible for userspace applications, as they have to combine lots of different functions into one single application.

I'm not entirely sure how I feel about that, wouldn't the right solution be to create more devices? If this ends up being 100% passthrough basically, VFIO would be a better choice?

Quoted 5 lines

This patch removes the limitation here to allow multiple opens to each feature device node for AFU and FME from userspace applications. If user still needs exclusive access to these device node, O_EXCL flag must be issued together with open.

Wouldn't you wanna default to have exclusive access, and then allow multiple opens by means of a management interface, maybe?

Quoted 19 lines
---
 drivers/fpga/dfl-afu-main.c | 26 +++++++++++++++-----------
 drivers/fpga/dfl-fme-main.c | 19 ++++++++++++-------
 drivers/fpga/dfl.c          | 15 +++++++++++++--
 drivers/fpga/dfl.h          | 35 +++++++++++++++++++++++++++--------
 4 files changed, 67 insertions(+), 28 deletions(-)
drivers/fpga/dfl-afu-main.c +0 -1
index e4a34dc..c6e0e07 100644
@@ -561,14 +561,16 @@ static int afu_open(struct inode *inode, struct file *filp)
 	if (WARN_ON(!pdata))
 		return -ENODEV;
 
-	ret = dfl_feature_dev_use_begin(pdata);

drivers/fpga/dfl-afu-main.c static int afu_open(struct inode *inode, struct file *filp) · line 568

Quoted 10 lines
drivers/fpga/dfl-afu-main.c +5 -5
-	if (ret)
-		return ret;
-
-	dev_dbg(&fdev->dev, "Device File Open\n");
-	filp->private_data = fdev;
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, filp->f_flags & O_EXCL);
+	if (!ret) {
+		dev_dbg(&fdev->dev, "Device File Opened %d Times\n",
+			dfl_feature_dev_use_count(pdata));

Could those be trace events instead?

Quoted 175 lines
drivers/fpga/dfl-afu-main.c +10 -5
+		filp->private_data = fdev;
+	}
+	mutex_unlock(&pdata->lock);
 
-	return 0;
+	return ret;
 }
 
 static int afu_release(struct inode *inode, struct file *filp)
@@ -581,12 +583,14 @@ static int afu_release(struct inode *inode, struct file *filp)
 	pdata = dev_get_platdata(&pdev->dev);
 
 	mutex_lock(&pdata->lock);
-	__port_reset(pdev);
-	afu_dma_region_destroy(pdata);
-	mutex_unlock(&pdata->lock);
-
 	dfl_feature_dev_use_end(pdata);
 
+	if (!dfl_feature_dev_use_count(pdata)) {
+		__port_reset(pdev);
+		afu_dma_region_destroy(pdata);
+	}
+	mutex_unlock(&pdata->lock);
+
 	return 0;
 }
 
drivers/fpga/dfl-fme-main.c +12 -7
index 7c930e6..fda8623 100644
@@ -600,14 +600,16 @@ static int fme_open(struct inode *inode, struct file *filp)
 	if (WARN_ON(!pdata))
 		return -ENODEV;
 
-	ret = dfl_feature_dev_use_begin(pdata);
-	if (ret)
-		return ret;
-
-	dev_dbg(&fdev->dev, "Device File Open\n");
-	filp->private_data = pdata;
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, filp->f_flags & O_EXCL);
+	if (!ret) {
+		dev_dbg(&fdev->dev, "Device File Opened %d Times\n",
+			dfl_feature_dev_use_count(pdata));
+		filp->private_data = pdata;
+	}
+	mutex_unlock(&pdata->lock);
 
-	return 0;
+	return ret;
 }
 
 static int fme_release(struct inode *inode, struct file *filp)
@@ -616,7 +618,10 @@ static int fme_release(struct inode *inode, struct file *filp)
 	struct platform_device *pdev = pdata->dev;
 
 	dev_dbg(&pdev->dev, "Device File Release\n");
+
+	mutex_lock(&pdata->lock);
 	dfl_feature_dev_use_end(pdata);
+	mutex_unlock(&pdata->lock);
 
 	return 0;
 }
drivers/fpga/dfl.c +13 -2
index 96a2b82..9909948 100644
@@ -1079,6 +1079,7 @@ static int __init dfl_fpga_init(void)
  */
 int dfl_fpga_cdev_release_port(struct dfl_fpga_cdev *cdev, int port_id)
 {
+	struct dfl_feature_platform_data *pdata;
 	struct platform_device *port_pdev;
 	int ret = -ENODEV;
 
@@ -1093,7 +1094,11 @@ int dfl_fpga_cdev_release_port(struct dfl_fpga_cdev *cdev, int port_id)
 		goto put_dev_exit;
 	}
 
-	ret = dfl_feature_dev_use_begin(dev_get_platdata(&port_pdev->dev));
+	pdata = dev_get_platdata(&port_pdev->dev);
+
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, true);
+	mutex_unlock(&pdata->lock);
 	if (ret)
 		goto put_dev_exit;
 
@@ -1120,6 +1125,7 @@ EXPORT_SYMBOL_GPL(dfl_fpga_cdev_release_port);
  */
 int dfl_fpga_cdev_assign_port(struct dfl_fpga_cdev *cdev, int port_id)
 {
+	struct dfl_feature_platform_data *pdata;
 	struct platform_device *port_pdev;
 	int ret = -ENODEV;
 
@@ -1138,7 +1144,12 @@ int dfl_fpga_cdev_assign_port(struct dfl_fpga_cdev *cdev, int port_id)
 	if (ret)
 		goto put_dev_exit;
 
-	dfl_feature_dev_use_end(dev_get_platdata(&port_pdev->dev));
+	pdata = dev_get_platdata(&port_pdev->dev);
+
+	mutex_lock(&pdata->lock);
+	dfl_feature_dev_use_end(pdata);
+	mutex_unlock(&pdata->lock);
+
 	cdev->released_port_num--;
 put_dev_exit:
 	put_device(&port_pdev->dev);
drivers/fpga/dfl.h +15 -7
index 9f0e656..4a9a33c 100644
@@ -205,8 +205,6 @@ struct dfl_feature {
 	const struct dfl_feature_ops *ops;
 };
 
-#define DEV_STATUS_IN_USE	0
-
 #define FEATURE_DEV_ID_UNUSED	(-1)
 
 /**
@@ -219,8 +217,9 @@ struct dfl_feature {
  * @dfl_cdev: ptr to container device.
  * @id: id used for this feature device.
  * @disable_count: count for port disable.
+ * @excl_open: set on feature device exclusive open.
+ * @open_count: count for feature device open.
  * @num: number for sub features.
- * @dev_status: dev status (e.g. DEV_STATUS_IN_USE).
  * @private: ptr to feature dev private data.
  * @features: sub features of this feature dev.
  */
@@ -232,26 +231,46 @@ struct dfl_feature_platform_data {
 	struct dfl_fpga_cdev *dfl_cdev;
 	int id;
 	unsigned int disable_count;
-	unsigned long dev_status;
+	bool excl_open;
+	int open_count;
 	void *private;
 	int num;
 	struct dfl_feature features[0];
 };
 
 static inline
 
-int dfl_feature_dev_use_begin(struct dfl_feature_platform_data *pdata)
+int dfl_feature_dev_use_begin(struct dfl_feature_platform_data *pdata,
+			      bool excl)
 {
-	/* Test and set IN_USE flags to ensure file is exclusively used */
-	if (test_and_set_bit_lock(DEV_STATUS_IN_USE, &pdata->dev_status))
+	if (pdata->excl_open)
 		return -EBUSY;
 
+	if (excl) {
+		if (pdata->open_count)
+			return -EBUSY;
+
+		pdata->excl_open = true;
+	}
+	pdata->open_count++;
+
 	return 0;
 }
 
 static inline
 void dfl_feature_dev_use_end(struct dfl_feature_platform_data *pdata)
 {

drivers/fpga/dfl.h struct dfl_feature_platform_data { · line 271

Quoted 10 lines
drivers/fpga/dfl.h +9 -1
-	clear_bit_unlock(DEV_STATUS_IN_USE, &pdata->dev_status);
+	pdata->excl_open = false;
+
+	if (WARN_ON(pdata->open_count <= 0))
+		return;
+
+	pdata->open_count--;
+}
+
+static inline

Feel free to drop the inline here. Your compiler will figure that out by iteself.

Quoted 9 lines
drivers/fpga/dfl.h +3 -0
+int dfl_feature_dev_use_count(struct dfl_feature_platform_data *pdata)
+{
+	return pdata->open_count;
 }
 

static inline

Signature · 1 line
2.7.4

Again, sorry for the delay,

Moritz

author maintainer
#4 lore raw
Quoted 11 lines · Moritz Fischer

Hi Xu,

Sorry for the delay.

Quoted 6 lines · Xu Yilun

Each DFL functional block, e.g. AFU (Accelerated Function Unit) and FME (FPGA Management Engine), could implement more than one function within its region, but current driver only allows one user application to access it by exclusive open on device node. So this is not convenient and flexible for userspace applications, as they have to combine lots of different functions into one single application.

Quoted 3 lines

I'm not entirely sure how I feel about that, wouldn't the right solution be to create more devices? If this ends up being 100% passthrough basically, VFIO would be a better choice?

The major issue we want to resolve is how to access the same accelerator by multiple applications. As you know, the accelerator is the dynamic region (AFU) defined by end user, so we don't know how many sub functions end user will implement in the one dynamic region (AFU) of FPGA. So driver can't create devices for logic blocks implemented inside dynamic region.

We don't want 100% passthrough, but only dynamic region (AFU), because for static region part, we can reuse everything, including hardware logics, kernel drivers and upper layer stack/lib/app/tools. Use VFIO PCI directly may not be helpful for our case, and make the device node to support multiple open seems the simplest solution.

Quoted 7 lines
Quoted 5 lines

This patch removes the limitation here to allow multiple opens to each feature device node for AFU and FME from userspace applications. If user still needs exclusive access to these device node, O_EXCL flag must be issued together with open.

Wouldn't you wanna default to have exclusive access, and then allow multiple opens by means of a management interface, maybe?

I see some examples here which is using O_EXCL flag to indicate exclusive open, like nvram misc driver. I feel this may be a regular method to follow, I believe if we can save one userspace interface with this, that will be simpler for users too.

Quoted 18 lines
Quoted 18 lines
---
 drivers/fpga/dfl-afu-main.c | 26 +++++++++++++++-----------
 drivers/fpga/dfl-fme-main.c | 19 ++++++++++++-------
 drivers/fpga/dfl.c          | 15 +++++++++++++--
 drivers/fpga/dfl.h          | 35 +++++++++++++++++++++++++++--------
 4 files changed, 67 insertions(+), 28 deletions(-)
drivers/fpga/dfl-afu-main.c +0 -0
index e4a34dc..c6e0e07 100644
@@ -561,14 +561,16 @@ static int afu_open(struct inode *inode, struct file *filp)
 	if (WARN_ON(!pdata))
 		return -ENODEV;
 
Quoted 12 lines

drivers/fpga/dfl-afu-main.c static int afu_open(struct inode *inode, struct file *filp) · line 568

Quoted 11 lines
drivers/fpga/dfl-afu-main.c +5 -6
-	ret = dfl_feature_dev_use_begin(pdata);
-	if (ret)
-		return ret;
-
-	dev_dbg(&fdev->dev, "Device File Open\n");
-	filp->private_data = fdev;
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, filp->f_flags & O_EXCL);
+	if (!ret) {
+		dev_dbg(&fdev->dev, "Device File Opened %d Times\n",
+			dfl_feature_dev_use_count(pdata));

Could those be trace events instead?

I investigated a little to see how we use trace to get this info.
1. config PROFILE_ANNOTATED_BRANCHES in kernel, and add likely()/unlikely() for ret judgement. This adds some overhead to system.
2. config CONFIG_PROFILE_ALL_BRANCHES, no code change here. This adds great overhead to system.
3. write a dedicated trace event for this count. I think this is a little too heavy, we need to add extra file for it, but this count is just minor info to the driver.

What's your suggestion for this? Could we just leave the print here for simplicity.

Quoted 172 lines
Quoted 172 lines
drivers/fpga/dfl-afu-main.c +10 -5
+		filp->private_data = fdev;
+	}
+	mutex_unlock(&pdata->lock);
 
-	return 0;
+	return ret;
 }
 
 static int afu_release(struct inode *inode, struct file *filp)
@@ -581,12 +583,14 @@ static int afu_release(struct inode *inode, struct file *filp)
 	pdata = dev_get_platdata(&pdev->dev);
 
 	mutex_lock(&pdata->lock);
-	__port_reset(pdev);
-	afu_dma_region_destroy(pdata);
-	mutex_unlock(&pdata->lock);
-
 	dfl_feature_dev_use_end(pdata);
 
+	if (!dfl_feature_dev_use_count(pdata)) {
+		__port_reset(pdev);
+		afu_dma_region_destroy(pdata);
+	}
+	mutex_unlock(&pdata->lock);
+
 	return 0;
 }
 
drivers/fpga/dfl-fme-main.c +12 -7
index 7c930e6..fda8623 100644
@@ -600,14 +600,16 @@ static int fme_open(struct inode *inode, struct file *filp)
 	if (WARN_ON(!pdata))
 		return -ENODEV;
 
-	ret = dfl_feature_dev_use_begin(pdata);
-	if (ret)
-		return ret;
-
-	dev_dbg(&fdev->dev, "Device File Open\n");
-	filp->private_data = pdata;
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, filp->f_flags & O_EXCL);
+	if (!ret) {
+		dev_dbg(&fdev->dev, "Device File Opened %d Times\n",
+			dfl_feature_dev_use_count(pdata));
+		filp->private_data = pdata;
+	}
+	mutex_unlock(&pdata->lock);
 
-	return 0;
+	return ret;
 }
 
 static int fme_release(struct inode *inode, struct file *filp)
@@ -616,7 +618,10 @@ static int fme_release(struct inode *inode, struct file *filp)
 	struct platform_device *pdev = pdata->dev;
 
 	dev_dbg(&pdev->dev, "Device File Release\n");
+
+	mutex_lock(&pdata->lock);
 	dfl_feature_dev_use_end(pdata);
+	mutex_unlock(&pdata->lock);
 
 	return 0;
 }
drivers/fpga/dfl.c +13 -2
index 96a2b82..9909948 100644
@@ -1079,6 +1079,7 @@ static int __init dfl_fpga_init(void)
  */
 int dfl_fpga_cdev_release_port(struct dfl_fpga_cdev *cdev, int port_id)
 {
+	struct dfl_feature_platform_data *pdata;
 	struct platform_device *port_pdev;
 	int ret = -ENODEV;
 
@@ -1093,7 +1094,11 @@ int dfl_fpga_cdev_release_port(struct dfl_fpga_cdev *cdev, int port_id)
 		goto put_dev_exit;
 	}
 
-	ret = dfl_feature_dev_use_begin(dev_get_platdata(&port_pdev->dev));
+	pdata = dev_get_platdata(&port_pdev->dev);
+
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, true);
+	mutex_unlock(&pdata->lock);
 	if (ret)
 		goto put_dev_exit;
 
@@ -1120,6 +1125,7 @@ EXPORT_SYMBOL_GPL(dfl_fpga_cdev_release_port);
  */
 int dfl_fpga_cdev_assign_port(struct dfl_fpga_cdev *cdev, int port_id)
 {
+	struct dfl_feature_platform_data *pdata;
 	struct platform_device *port_pdev;
 	int ret = -ENODEV;
 
@@ -1138,7 +1144,12 @@ int dfl_fpga_cdev_assign_port(struct dfl_fpga_cdev *cdev, int port_id)
 	if (ret)
 		goto put_dev_exit;
 
-	dfl_feature_dev_use_end(dev_get_platdata(&port_pdev->dev));
+	pdata = dev_get_platdata(&port_pdev->dev);
+
+	mutex_lock(&pdata->lock);
+	dfl_feature_dev_use_end(pdata);
+	mutex_unlock(&pdata->lock);
+
 	cdev->released_port_num--;
 put_dev_exit:
 	put_device(&port_pdev->dev);
drivers/fpga/dfl.h +15 -7
index 9f0e656..4a9a33c 100644
@@ -205,8 +205,6 @@ struct dfl_feature {
 	const struct dfl_feature_ops *ops;
 };
 
-#define DEV_STATUS_IN_USE	0
-
 #define FEATURE_DEV_ID_UNUSED	(-1)
 
 /**
@@ -219,8 +217,9 @@ struct dfl_feature {
  * @dfl_cdev: ptr to container device.
  * @id: id used for this feature device.
  * @disable_count: count for port disable.
+ * @excl_open: set on feature device exclusive open.
+ * @open_count: count for feature device open.
  * @num: number for sub features.
- * @dev_status: dev status (e.g. DEV_STATUS_IN_USE).
  * @private: ptr to feature dev private data.
  * @features: sub features of this feature dev.
  */
@@ -232,26 +231,46 @@ struct dfl_feature_platform_data {
 	struct dfl_fpga_cdev *dfl_cdev;
 	int id;
 	unsigned int disable_count;
-	unsigned long dev_status;
+	bool excl_open;
+	int open_count;
 	void *private;
 	int num;
 	struct dfl_feature features[0];
 };
 
 static inline
 
-int dfl_feature_dev_use_begin(struct dfl_feature_platform_data *pdata)
+int dfl_feature_dev_use_begin(struct dfl_feature_platform_data *pdata,
+			      bool excl)
 {
-	/* Test and set IN_USE flags to ensure file is exclusively used */
-	if (test_and_set_bit_lock(DEV_STATUS_IN_USE, &pdata->dev_status))
+	if (pdata->excl_open)
 		return -EBUSY;
 
+	if (excl) {
+		if (pdata->open_count)
+			return -EBUSY;
+
+		pdata->excl_open = true;
+	}
+	pdata->open_count++;
+
 	return 0;
 }
 
Quoted 15 lines

drivers/fpga/dfl.h struct dfl_feature_platform_data { · line 270

Quoted 13 lines
drivers/fpga/dfl.h +9 -1
 static inline
 void dfl_feature_dev_use_end(struct dfl_feature_platform_data *pdata)
 {
-	clear_bit_unlock(DEV_STATUS_IN_USE, &pdata->dev_status);
+	pdata->excl_open = false;
+
+	if (WARN_ON(pdata->open_count <= 0))
+		return;
+
+	pdata->open_count--;
+}
+
+static inline

Feel free to drop the inline here. Your compiler will figure that out by iteself.

Yes I'll change it.

Quoted 5 lines
Quoted 5 lines
drivers/fpga/dfl.h +3 -0
+int dfl_feature_dev_use_count(struct dfl_feature_platform_data *pdata)
+{
+	return pdata->open_count;
 }
 
Quoted 8 lines
Quoted 4 lines

static inline

Signature · 1 line
2.7.4

Again, sorry for the delay,

Moritz

Thanks for take your time out :)

Yilun

author maintainer
#5 lore raw

Hi Moritz:

Do you have more concern on this patch?

I've sent a patch v2 for this, fixed minor inline comments.

Thanks.

Quoted 291 lines · Xu Yilun
Quoted 11 lines · Moritz Fischer

Hi Xu,

Sorry for the delay.

Quoted 6 lines · Xu Yilun

Each DFL functional block, e.g. AFU (Accelerated Function Unit) and FME (FPGA Management Engine), could implement more than one function within its region, but current driver only allows one user application to access it by exclusive open on device node. So this is not convenient and flexible for userspace applications, as they have to combine lots of different functions into one single application.

Quoted 3 lines

I'm not entirely sure how I feel about that, wouldn't the right solution be to create more devices? If this ends up being 100% passthrough basically, VFIO would be a better choice?

The major issue we want to resolve is how to access the same accelerator by multiple applications. As you know, the accelerator is the dynamic region (AFU) defined by end user, so we don't know how many sub functions end user will implement in the one dynamic region (AFU) of FPGA. So driver can't create devices for logic blocks implemented inside dynamic region.

We don't want 100% passthrough, but only dynamic region (AFU), because for static region part, we can reuse everything, including hardware logics, kernel drivers and upper layer stack/lib/app/tools. Use VFIO PCI directly may not be helpful for our case, and make the device node to support multiple open seems the simplest solution.

Quoted 7 lines
Quoted 5 lines

This patch removes the limitation here to allow multiple opens to each feature device node for AFU and FME from userspace applications. If user still needs exclusive access to these device node, O_EXCL flag must be issued together with open.

Wouldn't you wanna default to have exclusive access, and then allow multiple opens by means of a management interface, maybe?

I see some examples here which is using O_EXCL flag to indicate exclusive open, like nvram misc driver. I feel this may be a regular method to follow, I believe if we can save one userspace interface with this, that will be simpler for users too.

Quoted 18 lines
Quoted 18 lines
---
 drivers/fpga/dfl-afu-main.c | 26 +++++++++++++++-----------
 drivers/fpga/dfl-fme-main.c | 19 ++++++++++++-------
 drivers/fpga/dfl.c          | 15 +++++++++++++--
 drivers/fpga/dfl.h          | 35 +++++++++++++++++++++++++++--------
 4 files changed, 67 insertions(+), 28 deletions(-)
drivers/fpga/dfl-afu-main.c +0 -0
index e4a34dc..c6e0e07 100644
@@ -561,14 +561,16 @@ static int afu_open(struct inode *inode, struct file *filp)
 	if (WARN_ON(!pdata))
 		return -ENODEV;
 
Quoted 12 lines

drivers/fpga/dfl-afu-main.c static int afu_open(struct inode *inode, struct file *filp) · line 568

Quoted 11 lines
drivers/fpga/dfl-afu-main.c +5 -6
-	ret = dfl_feature_dev_use_begin(pdata);
-	if (ret)
-		return ret;
-
-	dev_dbg(&fdev->dev, "Device File Open\n");
-	filp->private_data = fdev;
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, filp->f_flags & O_EXCL);
+	if (!ret) {
+		dev_dbg(&fdev->dev, "Device File Opened %d Times\n",
+			dfl_feature_dev_use_count(pdata));

Could those be trace events instead?

I investigated a little to see how we use trace to get this info.
1. config PROFILE_ANNOTATED_BRANCHES in kernel, and add likely()/unlikely() for ret judgement. This adds some overhead to system.
2. config CONFIG_PROFILE_ALL_BRANCHES, no code change here. This adds great overhead to system.
3. write a dedicated trace event for this count. I think this is a little too heavy, we need to add extra file for it, but this count is just minor info to the driver.

What's your suggestion for this? Could we just leave the print here for simplicity.

Quoted 172 lines
Quoted 172 lines
drivers/fpga/dfl-afu-main.c +10 -5
+		filp->private_data = fdev;
+	}
+	mutex_unlock(&pdata->lock);
 
-	return 0;
+	return ret;
 }
 
 static int afu_release(struct inode *inode, struct file *filp)
@@ -581,12 +583,14 @@ static int afu_release(struct inode *inode, struct file *filp)
 	pdata = dev_get_platdata(&pdev->dev);
 
 	mutex_lock(&pdata->lock);
-	__port_reset(pdev);
-	afu_dma_region_destroy(pdata);
-	mutex_unlock(&pdata->lock);
-
 	dfl_feature_dev_use_end(pdata);
 
+	if (!dfl_feature_dev_use_count(pdata)) {
+		__port_reset(pdev);
+		afu_dma_region_destroy(pdata);
+	}
+	mutex_unlock(&pdata->lock);
+
 	return 0;
 }
 
drivers/fpga/dfl-fme-main.c +12 -7
index 7c930e6..fda8623 100644
@@ -600,14 +600,16 @@ static int fme_open(struct inode *inode, struct file *filp)
 	if (WARN_ON(!pdata))
 		return -ENODEV;
 
-	ret = dfl_feature_dev_use_begin(pdata);
-	if (ret)
-		return ret;
-
-	dev_dbg(&fdev->dev, "Device File Open\n");
-	filp->private_data = pdata;
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, filp->f_flags & O_EXCL);
+	if (!ret) {
+		dev_dbg(&fdev->dev, "Device File Opened %d Times\n",
+			dfl_feature_dev_use_count(pdata));
+		filp->private_data = pdata;
+	}
+	mutex_unlock(&pdata->lock);
 
-	return 0;
+	return ret;
 }
 
 static int fme_release(struct inode *inode, struct file *filp)
@@ -616,7 +618,10 @@ static int fme_release(struct inode *inode, struct file *filp)
 	struct platform_device *pdev = pdata->dev;
 
 	dev_dbg(&pdev->dev, "Device File Release\n");
+
+	mutex_lock(&pdata->lock);
 	dfl_feature_dev_use_end(pdata);
+	mutex_unlock(&pdata->lock);
 
 	return 0;
 }
drivers/fpga/dfl.c +13 -2
index 96a2b82..9909948 100644
@@ -1079,6 +1079,7 @@ static int __init dfl_fpga_init(void)
  */
 int dfl_fpga_cdev_release_port(struct dfl_fpga_cdev *cdev, int port_id)
 {
+	struct dfl_feature_platform_data *pdata;
 	struct platform_device *port_pdev;
 	int ret = -ENODEV;
 
@@ -1093,7 +1094,11 @@ int dfl_fpga_cdev_release_port(struct dfl_fpga_cdev *cdev, int port_id)
 		goto put_dev_exit;
 	}
 
-	ret = dfl_feature_dev_use_begin(dev_get_platdata(&port_pdev->dev));
+	pdata = dev_get_platdata(&port_pdev->dev);
+
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, true);
+	mutex_unlock(&pdata->lock);
 	if (ret)
 		goto put_dev_exit;
 
@@ -1120,6 +1125,7 @@ EXPORT_SYMBOL_GPL(dfl_fpga_cdev_release_port);
  */
 int dfl_fpga_cdev_assign_port(struct dfl_fpga_cdev *cdev, int port_id)
 {
+	struct dfl_feature_platform_data *pdata;
 	struct platform_device *port_pdev;
 	int ret = -ENODEV;
 
@@ -1138,7 +1144,12 @@ int dfl_fpga_cdev_assign_port(struct dfl_fpga_cdev *cdev, int port_id)
 	if (ret)
 		goto put_dev_exit;
 
-	dfl_feature_dev_use_end(dev_get_platdata(&port_pdev->dev));
+	pdata = dev_get_platdata(&port_pdev->dev);
+
+	mutex_lock(&pdata->lock);
+	dfl_feature_dev_use_end(pdata);
+	mutex_unlock(&pdata->lock);
+
 	cdev->released_port_num--;
 put_dev_exit:
 	put_device(&port_pdev->dev);
drivers/fpga/dfl.h +15 -7
index 9f0e656..4a9a33c 100644
@@ -205,8 +205,6 @@ struct dfl_feature {
 	const struct dfl_feature_ops *ops;
 };
 
-#define DEV_STATUS_IN_USE	0
-
 #define FEATURE_DEV_ID_UNUSED	(-1)
 
 /**
@@ -219,8 +217,9 @@ struct dfl_feature {
  * @dfl_cdev: ptr to container device.
  * @id: id used for this feature device.
  * @disable_count: count for port disable.
+ * @excl_open: set on feature device exclusive open.
+ * @open_count: count for feature device open.
  * @num: number for sub features.
- * @dev_status: dev status (e.g. DEV_STATUS_IN_USE).
  * @private: ptr to feature dev private data.
  * @features: sub features of this feature dev.
  */
@@ -232,26 +231,46 @@ struct dfl_feature_platform_data {
 	struct dfl_fpga_cdev *dfl_cdev;
 	int id;
 	unsigned int disable_count;
-	unsigned long dev_status;
+	bool excl_open;
+	int open_count;
 	void *private;
 	int num;
 	struct dfl_feature features[0];
 };
 
 static inline
 
-int dfl_feature_dev_use_begin(struct dfl_feature_platform_data *pdata)
+int dfl_feature_dev_use_begin(struct dfl_feature_platform_data *pdata,
+			      bool excl)
 {
-	/* Test and set IN_USE flags to ensure file is exclusively used */
-	if (test_and_set_bit_lock(DEV_STATUS_IN_USE, &pdata->dev_status))
+	if (pdata->excl_open)
 		return -EBUSY;
 
+	if (excl) {
+		if (pdata->open_count)
+			return -EBUSY;
+
+		pdata->excl_open = true;
+	}
+	pdata->open_count++;
+
 	return 0;
 }
 
Quoted 15 lines

drivers/fpga/dfl.h struct dfl_feature_platform_data { · line 270

Quoted 13 lines
drivers/fpga/dfl.h +9 -1
 static inline
 void dfl_feature_dev_use_end(struct dfl_feature_platform_data *pdata)
 {
-	clear_bit_unlock(DEV_STATUS_IN_USE, &pdata->dev_status);
+	pdata->excl_open = false;
+
+	if (WARN_ON(pdata->open_count <= 0))
+		return;
+
+	pdata->open_count--;
+}
+
+static inline

Feel free to drop the inline here. Your compiler will figure that out by iteself.

Yes I'll change it.

Quoted 5 lines
Quoted 5 lines
drivers/fpga/dfl.h +3 -0
+int dfl_feature_dev_use_count(struct dfl_feature_platform_data *pdata)
+{
+	return pdata->open_count;
 }
 
Quoted 8 lines
Quoted 4 lines

static inline

Signature · 1 line
2.7.4

Again, sorry for the delay,

Moritz

Thanks for take your time out :)

Yilun

author maintainer
#6 lore raw

On Mon, Dec 30, 2019 at 03:33:49PM +0800, Xu Yilum wrote:
Hi moritz,

Did you get a chance to check this patch? Thanks.

Quoted 300 lines

Hi Moritz:

Do you have more concern on this patch?

I've sent a patch v2 for this, fixed minor inline comments.

Thanks.

Quoted 291 lines · Xu Yilun
Quoted 11 lines · Moritz Fischer

Hi Xu,

Sorry for the delay.

Quoted 6 lines · Xu Yilun

Each DFL functional block, e.g. AFU (Accelerated Function Unit) and FME (FPGA Management Engine), could implement more than one function within its region, but current driver only allows one user application to access it by exclusive open on device node. So this is not convenient and flexible for userspace applications, as they have to combine lots of different functions into one single application.

Quoted 3 lines

I'm not entirely sure how I feel about that, wouldn't the right solution be to create more devices? If this ends up being 100% passthrough basically, VFIO would be a better choice?

The major issue we want to resolve is how to access the same accelerator by multiple applications. As you know, the accelerator is the dynamic region (AFU) defined by end user, so we don't know how many sub functions end user will implement in the one dynamic region (AFU) of FPGA. So driver can't create devices for logic blocks implemented inside dynamic region.

We don't want 100% passthrough, but only dynamic region (AFU), because for static region part, we can reuse everything, including hardware logics, kernel drivers and upper layer stack/lib/app/tools. Use VFIO PCI directly may not be helpful for our case, and make the device node to support multiple open seems the simplest solution.

Quoted 7 lines
Quoted 5 lines

This patch removes the limitation here to allow multiple opens to each feature device node for AFU and FME from userspace applications. If user still needs exclusive access to these device node, O_EXCL flag must be issued together with open.

Wouldn't you wanna default to have exclusive access, and then allow multiple opens by means of a management interface, maybe?

I see some examples here which is using O_EXCL flag to indicate exclusive open, like nvram misc driver. I feel this may be a regular method to follow, I believe if we can save one userspace interface with this, that will be simpler for users too.

Quoted 18 lines
Quoted 18 lines
---
 drivers/fpga/dfl-afu-main.c | 26 +++++++++++++++-----------
 drivers/fpga/dfl-fme-main.c | 19 ++++++++++++-------
 drivers/fpga/dfl.c          | 15 +++++++++++++--
 drivers/fpga/dfl.h          | 35 +++++++++++++++++++++++++++--------
 4 files changed, 67 insertions(+), 28 deletions(-)
drivers/fpga/dfl-afu-main.c +0 -0
index e4a34dc..c6e0e07 100644
@@ -561,14 +561,16 @@ static int afu_open(struct inode *inode, struct file *filp)
 	if (WARN_ON(!pdata))
 		return -ENODEV;
 
Quoted 12 lines

drivers/fpga/dfl-afu-main.c static int afu_open(struct inode *inode, struct file *filp) · line 568

Quoted 11 lines
drivers/fpga/dfl-afu-main.c +5 -6
-	ret = dfl_feature_dev_use_begin(pdata);
-	if (ret)
-		return ret;
-
-	dev_dbg(&fdev->dev, "Device File Open\n");
-	filp->private_data = fdev;
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, filp->f_flags & O_EXCL);
+	if (!ret) {
+		dev_dbg(&fdev->dev, "Device File Opened %d Times\n",
+			dfl_feature_dev_use_count(pdata));

Could those be trace events instead?

I investigated a little to see how we use trace to get this info.
1. config PROFILE_ANNOTATED_BRANCHES in kernel, and add likely()/unlikely() for ret judgement. This adds some overhead to system.
2. config CONFIG_PROFILE_ALL_BRANCHES, no code change here. This adds great overhead to system.
3. write a dedicated trace event for this count. I think this is a little too heavy, we need to add extra file for it, but this count is just minor info to the driver.

What's your suggestion for this? Could we just leave the print here for simplicity.

Quoted 172 lines
Quoted 172 lines
drivers/fpga/dfl-afu-main.c +10 -5
+		filp->private_data = fdev;
+	}
+	mutex_unlock(&pdata->lock);
 
-	return 0;
+	return ret;
 }
 
 static int afu_release(struct inode *inode, struct file *filp)
@@ -581,12 +583,14 @@ static int afu_release(struct inode *inode, struct file *filp)
 	pdata = dev_get_platdata(&pdev->dev);
 
 	mutex_lock(&pdata->lock);
-	__port_reset(pdev);
-	afu_dma_region_destroy(pdata);
-	mutex_unlock(&pdata->lock);
-
 	dfl_feature_dev_use_end(pdata);
 
+	if (!dfl_feature_dev_use_count(pdata)) {
+		__port_reset(pdev);
+		afu_dma_region_destroy(pdata);
+	}
+	mutex_unlock(&pdata->lock);
+
 	return 0;
 }
 
drivers/fpga/dfl-fme-main.c +12 -7
index 7c930e6..fda8623 100644
@@ -600,14 +600,16 @@ static int fme_open(struct inode *inode, struct file *filp)
 	if (WARN_ON(!pdata))
 		return -ENODEV;
 
-	ret = dfl_feature_dev_use_begin(pdata);
-	if (ret)
-		return ret;
-
-	dev_dbg(&fdev->dev, "Device File Open\n");
-	filp->private_data = pdata;
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, filp->f_flags & O_EXCL);
+	if (!ret) {
+		dev_dbg(&fdev->dev, "Device File Opened %d Times\n",
+			dfl_feature_dev_use_count(pdata));
+		filp->private_data = pdata;
+	}
+	mutex_unlock(&pdata->lock);
 
-	return 0;
+	return ret;
 }
 
 static int fme_release(struct inode *inode, struct file *filp)
@@ -616,7 +618,10 @@ static int fme_release(struct inode *inode, struct file *filp)
 	struct platform_device *pdev = pdata->dev;
 
 	dev_dbg(&pdev->dev, "Device File Release\n");
+
+	mutex_lock(&pdata->lock);
 	dfl_feature_dev_use_end(pdata);
+	mutex_unlock(&pdata->lock);
 
 	return 0;
 }
drivers/fpga/dfl.c +13 -2
index 96a2b82..9909948 100644
@@ -1079,6 +1079,7 @@ static int __init dfl_fpga_init(void)
  */
 int dfl_fpga_cdev_release_port(struct dfl_fpga_cdev *cdev, int port_id)
 {
+	struct dfl_feature_platform_data *pdata;
 	struct platform_device *port_pdev;
 	int ret = -ENODEV;
 
@@ -1093,7 +1094,11 @@ int dfl_fpga_cdev_release_port(struct dfl_fpga_cdev *cdev, int port_id)
 		goto put_dev_exit;
 	}
 
-	ret = dfl_feature_dev_use_begin(dev_get_platdata(&port_pdev->dev));
+	pdata = dev_get_platdata(&port_pdev->dev);
+
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, true);
+	mutex_unlock(&pdata->lock);
 	if (ret)
 		goto put_dev_exit;
 
@@ -1120,6 +1125,7 @@ EXPORT_SYMBOL_GPL(dfl_fpga_cdev_release_port);
  */
 int dfl_fpga_cdev_assign_port(struct dfl_fpga_cdev *cdev, int port_id)
 {
+	struct dfl_feature_platform_data *pdata;
 	struct platform_device *port_pdev;
 	int ret = -ENODEV;
 
@@ -1138,7 +1144,12 @@ int dfl_fpga_cdev_assign_port(struct dfl_fpga_cdev *cdev, int port_id)
 	if (ret)
 		goto put_dev_exit;
 
-	dfl_feature_dev_use_end(dev_get_platdata(&port_pdev->dev));
+	pdata = dev_get_platdata(&port_pdev->dev);
+
+	mutex_lock(&pdata->lock);
+	dfl_feature_dev_use_end(pdata);
+	mutex_unlock(&pdata->lock);
+
 	cdev->released_port_num--;
 put_dev_exit:
 	put_device(&port_pdev->dev);
drivers/fpga/dfl.h +15 -7
index 9f0e656..4a9a33c 100644
@@ -205,8 +205,6 @@ struct dfl_feature {
 	const struct dfl_feature_ops *ops;
 };
 
-#define DEV_STATUS_IN_USE	0
-
 #define FEATURE_DEV_ID_UNUSED	(-1)
 
 /**
@@ -219,8 +217,9 @@ struct dfl_feature {
  * @dfl_cdev: ptr to container device.
  * @id: id used for this feature device.
  * @disable_count: count for port disable.
+ * @excl_open: set on feature device exclusive open.
+ * @open_count: count for feature device open.
  * @num: number for sub features.
- * @dev_status: dev status (e.g. DEV_STATUS_IN_USE).
  * @private: ptr to feature dev private data.
  * @features: sub features of this feature dev.
  */
@@ -232,26 +231,46 @@ struct dfl_feature_platform_data {
 	struct dfl_fpga_cdev *dfl_cdev;
 	int id;
 	unsigned int disable_count;
-	unsigned long dev_status;
+	bool excl_open;
+	int open_count;
 	void *private;
 	int num;
 	struct dfl_feature features[0];
 };
 
 static inline
 
-int dfl_feature_dev_use_begin(struct dfl_feature_platform_data *pdata)
+int dfl_feature_dev_use_begin(struct dfl_feature_platform_data *pdata,
+			      bool excl)
 {
-	/* Test and set IN_USE flags to ensure file is exclusively used */
-	if (test_and_set_bit_lock(DEV_STATUS_IN_USE, &pdata->dev_status))
+	if (pdata->excl_open)
 		return -EBUSY;
 
+	if (excl) {
+		if (pdata->open_count)
+			return -EBUSY;
+
+		pdata->excl_open = true;
+	}
+	pdata->open_count++;
+
 	return 0;
 }
 
Quoted 15 lines

drivers/fpga/dfl.h struct dfl_feature_platform_data { · line 270

Quoted 13 lines
drivers/fpga/dfl.h +9 -1
 static inline
 void dfl_feature_dev_use_end(struct dfl_feature_platform_data *pdata)
 {
-	clear_bit_unlock(DEV_STATUS_IN_USE, &pdata->dev_status);
+	pdata->excl_open = false;
+
+	if (WARN_ON(pdata->open_count <= 0))
+		return;
+
+	pdata->open_count--;
+}
+
+static inline

Feel free to drop the inline here. Your compiler will figure that out by iteself.

Yes I'll change it.

Quoted 5 lines
Quoted 5 lines
drivers/fpga/dfl.h +3 -0
+int dfl_feature_dev_use_count(struct dfl_feature_platform_data *pdata)
+{
+	return pdata->open_count;
 }
 
Quoted 8 lines
Quoted 4 lines

static inline

Signature · 1 line
2.7.4

Again, sorry for the delay,

Moritz

Thanks for take your time out :)

Yilun

maintainer Applied
#7 lore raw
In reply to Xu Yilun

Hi Xu,

Quoted 233 lines · Xu Yilun

Each DFL functional block, e.g. AFU (Accelerated Function Unit) and FME (FPGA Management Engine), could implement more than one function within its region, but current driver only allows one user application to access it by exclusive open on device node. So this is not convenient and flexible for userspace applications, as they have to combine lots of different functions into one single application.

This patch removes the limitation here to allow multiple opens to each feature device node for AFU and FME from userspace applications. If user still needs exclusive access to these device node, O_EXCL flag must be issued together with open.

---
 drivers/fpga/dfl-afu-main.c | 26 +++++++++++++++-----------
 drivers/fpga/dfl-fme-main.c | 19 ++++++++++++-------
 drivers/fpga/dfl.c          | 15 +++++++++++++--
 drivers/fpga/dfl.h          | 35 +++++++++++++++++++++++++++--------
 4 files changed, 67 insertions(+), 28 deletions(-)
drivers/fpga/dfl-afu-main.c +15 -11
index e4a34dc..c6e0e07 100644
@@ -561,14 +561,16 @@ static int afu_open(struct inode *inode, struct file *filp)
 	if (WARN_ON(!pdata))
 		return -ENODEV;
 
-	ret = dfl_feature_dev_use_begin(pdata);
-	if (ret)
-		return ret;
-
-	dev_dbg(&fdev->dev, "Device File Open\n");
-	filp->private_data = fdev;
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, filp->f_flags & O_EXCL);
+	if (!ret) {
+		dev_dbg(&fdev->dev, "Device File Opened %d Times\n",
+			dfl_feature_dev_use_count(pdata));
+		filp->private_data = fdev;
+	}
+	mutex_unlock(&pdata->lock);
 
-	return 0;
+	return ret;
 }
 
 static int afu_release(struct inode *inode, struct file *filp)
@@ -581,12 +583,14 @@ static int afu_release(struct inode *inode, struct file *filp)
 	pdata = dev_get_platdata(&pdev->dev);
 
 	mutex_lock(&pdata->lock);
-	__port_reset(pdev);
-	afu_dma_region_destroy(pdata);
-	mutex_unlock(&pdata->lock);
-
 	dfl_feature_dev_use_end(pdata);
 
+	if (!dfl_feature_dev_use_count(pdata)) {
+		__port_reset(pdev);
+		afu_dma_region_destroy(pdata);
+	}
+	mutex_unlock(&pdata->lock);
+
 	return 0;
 }
 
drivers/fpga/dfl-fme-main.c +12 -7
index 7c930e6..fda8623 100644
@@ -600,14 +600,16 @@ static int fme_open(struct inode *inode, struct file *filp)
 	if (WARN_ON(!pdata))
 		return -ENODEV;
 
-	ret = dfl_feature_dev_use_begin(pdata);
-	if (ret)
-		return ret;
-
-	dev_dbg(&fdev->dev, "Device File Open\n");
-	filp->private_data = pdata;
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, filp->f_flags & O_EXCL);
+	if (!ret) {
+		dev_dbg(&fdev->dev, "Device File Opened %d Times\n",
+			dfl_feature_dev_use_count(pdata));
+		filp->private_data = pdata;
+	}
+	mutex_unlock(&pdata->lock);
 
-	return 0;
+	return ret;
 }
 
 static int fme_release(struct inode *inode, struct file *filp)
@@ -616,7 +618,10 @@ static int fme_release(struct inode *inode, struct file *filp)
 	struct platform_device *pdev = pdata->dev;
 
 	dev_dbg(&pdev->dev, "Device File Release\n");
+
+	mutex_lock(&pdata->lock);
 	dfl_feature_dev_use_end(pdata);
+	mutex_unlock(&pdata->lock);
 
 	return 0;
 }
drivers/fpga/dfl.c +13 -2
index 96a2b82..9909948 100644
@@ -1079,6 +1079,7 @@ static int __init dfl_fpga_init(void)
  */
 int dfl_fpga_cdev_release_port(struct dfl_fpga_cdev *cdev, int port_id)
 {
+	struct dfl_feature_platform_data *pdata;
 	struct platform_device *port_pdev;
 	int ret = -ENODEV;
 
@@ -1093,7 +1094,11 @@ int dfl_fpga_cdev_release_port(struct dfl_fpga_cdev *cdev, int port_id)
 		goto put_dev_exit;
 	}
 
-	ret = dfl_feature_dev_use_begin(dev_get_platdata(&port_pdev->dev));
+	pdata = dev_get_platdata(&port_pdev->dev);
+
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, true);
+	mutex_unlock(&pdata->lock);
 	if (ret)
 		goto put_dev_exit;
 
@@ -1120,6 +1125,7 @@ EXPORT_SYMBOL_GPL(dfl_fpga_cdev_release_port);
  */
 int dfl_fpga_cdev_assign_port(struct dfl_fpga_cdev *cdev, int port_id)
 {
+	struct dfl_feature_platform_data *pdata;
 	struct platform_device *port_pdev;
 	int ret = -ENODEV;
 
@@ -1138,7 +1144,12 @@ int dfl_fpga_cdev_assign_port(struct dfl_fpga_cdev *cdev, int port_id)
 	if (ret)
 		goto put_dev_exit;
 
-	dfl_feature_dev_use_end(dev_get_platdata(&port_pdev->dev));
+	pdata = dev_get_platdata(&port_pdev->dev);
+
+	mutex_lock(&pdata->lock);
+	dfl_feature_dev_use_end(pdata);
+	mutex_unlock(&pdata->lock);
+
 	cdev->released_port_num--;
 put_dev_exit:
 	put_device(&port_pdev->dev);
drivers/fpga/dfl.h +27 -8
index 9f0e656..4a9a33c 100644
@@ -205,8 +205,6 @@ struct dfl_feature {
 	const struct dfl_feature_ops *ops;
 };
 
-#define DEV_STATUS_IN_USE	0
-
 #define FEATURE_DEV_ID_UNUSED	(-1)
 
 /**
@@ -219,8 +217,9 @@ struct dfl_feature {
  * @dfl_cdev: ptr to container device.
  * @id: id used for this feature device.
  * @disable_count: count for port disable.
+ * @excl_open: set on feature device exclusive open.
+ * @open_count: count for feature device open.
  * @num: number for sub features.
- * @dev_status: dev status (e.g. DEV_STATUS_IN_USE).
  * @private: ptr to feature dev private data.
  * @features: sub features of this feature dev.
  */
@@ -232,26 +231,46 @@ struct dfl_feature_platform_data {
 	struct dfl_fpga_cdev *dfl_cdev;
 	int id;
 	unsigned int disable_count;
-	unsigned long dev_status;
+	bool excl_open;
+	int open_count;
 	void *private;
 	int num;
 	struct dfl_feature features[0];
 };
 
 static inline
-int dfl_feature_dev_use_begin(struct dfl_feature_platform_data *pdata)
+int dfl_feature_dev_use_begin(struct dfl_feature_platform_data *pdata,
+			      bool excl)
 {
-	/* Test and set IN_USE flags to ensure file is exclusively used */
-	if (test_and_set_bit_lock(DEV_STATUS_IN_USE, &pdata->dev_status))
+	if (pdata->excl_open)
 		return -EBUSY;
 
+	if (excl) {
+		if (pdata->open_count)
+			return -EBUSY;
+
+		pdata->excl_open = true;
+	}
+	pdata->open_count++;
+
 	return 0;
 }
 
 static inline
 void dfl_feature_dev_use_end(struct dfl_feature_platform_data *pdata)
 {
-	clear_bit_unlock(DEV_STATUS_IN_USE, &pdata->dev_status);
+	pdata->excl_open = false;
+
+	if (WARN_ON(pdata->open_count <= 0))
+		return;
+
+	pdata->open_count--;
+}
+
+static inline
+int dfl_feature_dev_use_count(struct dfl_feature_platform_data *pdata)
+{
+	return pdata->open_count;
 }
 
 static inline
Signature · 1 line
2.7.4

Applied to for-next.

Thanks,
Moritz