Skip to contentSkip to conversation

patch "usb: host: xhci-tegra: Correct phy enable sequence" added to usb-next

PATCH [email protected] 1 participant 1 message Nov 18, 2019

Subsystems (4)
Stable branch USB Tegra architecture support USB xHCI driver
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

usb: host: xhci-tegra: Correct phy enable sequence

to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-next branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will also be merged in the next major kernel release during the merge window.

If you have any questions about this process, please let me know.

From 6351653febbb784d86fdf83afe41f7523a61b392 Mon Sep 17 00:00:00 2001
From: Nagarjuna Kristam <[email protected]>
Date: Mon, 4 Nov 2019 14:54:30 +0530
Subject: usb: host: xhci-tegra: Correct phy enable sequence

XUSB phy needs to be enabled before un-powergating the power partitions. However in the current sequence, it happens opposite. Correct the phy enable and powergating partition sequence to avoid any boot hangs.

Signed-off-by Nagarjuna Kristam <[email protected]>
Cc stable <[email protected]>
Signed-off-by Jui Chang Kuo <[email protected]>
Tested-by Jon Hunter <[email protected]>
Acked-by Thierry Reding <[email protected]>
Link https://lore.kernel.org/r/[email protected] open here
Signed-off-by Greg Kroah-Hartman <[email protected]>
---
 drivers/usb/host/xhci-tegra.c | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)
drivers/usb/host/xhci-tegra.c +13 -12
index 540b47a99824..bf9065438320 100644
@@ -763,7 +763,6 @@ static int tegra_xusb_runtime_suspend(struct device *dev)
 {
 	struct tegra_xusb *tegra = dev_get_drvdata(dev);
 
-	tegra_xusb_phy_disable(tegra);
 	regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies);
 	tegra_xusb_clk_disable(tegra);
 

@@ -787,16 +786,8 @@ static int tegra_xusb_runtime_resume(struct device *dev)
 		goto disable_clk;
 	}
 
-	err = tegra_xusb_phy_enable(tegra);
-	if (err < 0) {
-		dev_err(dev, "failed to enable PHYs: %d\n", err);
-		goto disable_regulator;
-	}
-
 	return 0;
 
-disable_regulator:
-	regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies);
 disable_clk:
 	tegra_xusb_clk_disable(tegra);
 	return err;

@@ -1188,6 +1179,12 @@ static int tegra_xusb_probe(struct platform_device *pdev)
 	 */
 	platform_set_drvdata(pdev, tegra);
 
+	err = tegra_xusb_phy_enable(tegra);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to enable PHYs: %d\n", err);
+		goto put_hcd;
+	}
+
 	pm_runtime_enable(&pdev->dev);
 	if (pm_runtime_enabled(&pdev->dev))
 		err = pm_runtime_get_sync(&pdev->dev);

@@ -1196,7 +1193,7 @@ static int tegra_xusb_probe(struct platform_device *pdev)
 
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed to enable device: %d\n", err);
-		goto disable_rpm;
+		goto disable_phy;
 	}
 
 	tegra_xusb_config(tegra, regs);

@@ -1282,9 +1279,11 @@ static int tegra_xusb_probe(struct platform_device *pdev)
 put_rpm:
 	if (!pm_runtime_status_suspended(&pdev->dev))
 		tegra_xusb_runtime_suspend(&pdev->dev);
-disable_rpm:
-	pm_runtime_disable(&pdev->dev);
+put_hcd:
 	usb_put_hcd(tegra->hcd);
+disable_phy:
+	tegra_xusb_phy_disable(tegra);
+	pm_runtime_disable(&pdev->dev);
 put_powerdomains:
 	if (!of_property_read_bool(pdev->dev.of_node, "power-domains")) {
 		tegra_powergate_power_off(TEGRA_POWERGATE_XUSBC);

@@ -1321,6 +1320,8 @@ static int tegra_xusb_remove(struct platform_device *pdev)
 		tegra_xusb_powerdomain_remove(&pdev->dev, tegra);
 	}
 
+	tegra_xusb_phy_disable(tegra);
+
 	tegra_xusb_padctl_put(tegra->padctl);
 
 	return 0;
Signature · 1 line
2.24.0