Implement hv_is_hibernation_supported() and enhance hv_balloon for hibernation
Subsystems (4)
Dexuan Cui
maintainerv2 cover Implement hv_is_hibernation_supported() and enhance hv_balloon for hibernation
v2 is actually the same as v1. This is just a resend.
I suggest both the patches should go through the Hyper-V tree:
https://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux.git/log/?h=hyperv-next
because the first patch is needed by the second one.
This first patch doesn't conflict with any patch in the tip.git tree.
Dexuan Cui (2):
x86/hyperv: Implement hv_is_hibernation_supported()
hv_balloon: Add the support of hibernation
arch/x86/hyperv/hv_init.c | 7 +++ drivers/hv/hv_balloon.c | 87 +++++++++++++++++++++++++++++++++- include/asm-generic/mshyperv.h | 2 + 3 files changed, 94 insertions(+), 2 deletions(-)
Signature · 1 line
2.19.1
Dexuan Cui
maintainerPATCH v2 1/2 x86/hyperv: Implement hv_is_hibernation_supported()
The API will be used by the hv_balloon and hv_vmbus drivers.
Balloon up/down and hot-add of memory must not be active if the user wants the Linux VM to support hibernation, because they are incompatible with hibernation according to Hyper-V team, e.g. upon suspend the balloon VSP doesn't save any info about the ballooned-out pages (if any); so, after Linux resumes, Linux balloon VSC expects that the VSP will return the pages if Linux is under memory pressure, but the VSP will never do that, since the VSP thinks it never stole the pages from the VM.
So, if the user wants Linux VM to support hibernation, Linux must forbid balloon up/down and hot-add, and the only functionality of the balloon VSC driver is reporting the VM's memory pressure to the host.
Ideally, when Linux detects that the user wants it to support hibernation, the balloon VSC should tell the VSP that it does not support ballooning and hot-add. However, the current version of the VSP requires the VSC should support these capabilities, otherwise the capability negotiation fails and the VSC can not load at all, so with the later changes to the VSC driver, Linux VM still reports to the VSP that the VSC supports these capabilities, but the VSC ignores the VSP's requests of balloon up/down and hot add, and reports an error to the VSP, when applicable. BTW, in the future the balloon VSP driver will allow the VSC to not support the capabilities of balloon up/down and hot add.
The ACPI S4 state is not a must for hibernation to work, because Linux is able to hibernate as long as the system can shut down. However in practice we decide to artificially use the presence of the virtual ACPI S4 state as an indicator of the user's intent of using hibernation, because Linux VM must find a way to know if the user wants to use the hibernation feature or not.
By default, Hyper-V does not enable the virtual ACPI S4 state; on recent Hyper-V hosts (e.g. RS5, 19H1), the administrator is able to enable the state for a VM by WMI commands.
Once all the vmbus and VSC patches for the hibernation feature are accepted, an extra patch will be submitted to forbid hibernation if the virtual ACPI S4 state is absent, i.e. hv_is_hibernation_supported() is false.
---
v2 is actually the same as v1. This is just a resend.
I suggest this patch should go through the Hyper-V tree:
https://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux.git/log/?h=hyperv-next
because it's needed by
[PATCH v2 2/2] hv_balloon: Add the support of hibernation and some upcoming patches.
This patch doesn't conflict with any patch in the tip.git tree.
arch/x86/hyperv/hv_init.c | 7 +++++++ include/asm-generic/mshyperv.h | 2 ++ 2 files changed, 9 insertions(+)
arch/x86/hyperv/hv_init.c +7 -0
@@ -7,6 +7,7 @@* Author : K. Y. Srinivasan <[email protected]> */ +#include <linux/acpi.h> #include <linux/efi.h> #include <linux/types.h> #include <asm/apic.h>
@@ -493,3 +494,9 @@ bool hv_is_hyperv_initialized(void)return hypercall_msr.enable; }EXPORT_SYMBOL_GPL (hv_is_hyperv_initialized); + +bool hv_is_hibernation_supported (void ) +{ +return acpi_sleep_state_supported (ACPI_STATE_S4 ); +} +EXPORT_SYMBOL_GPL (hv_is_hibernation_supported);
include/asm-generic/mshyperv.h +2 -0
@@ -166,10 +166,12 @@ static inline int cpumask_to_vpset(struct hv_vpset *vpset,void hyperv_report_panic (struct pt_regs *regs,long err);void hyperv_report_panic_msg (phys_addr_t pa,size_t size);bool hv_is_hyperv_initialized (void ); +bool hv_is_hibernation_supported (void );void hyperv_cleanup (void );void hv_setup_sched_clock (void *sched_clock);#else /* CONFIG_HYPERV */ static inline bool hv_is_hyperv_initialized (void ) {return false; } +static inline bool hv_is_hibernation_supported (void ) {return false; }static inline void hyperv_cleanup (void ) {}#endif /* CONFIG_HYPERV */
Signature · 1 line
2.19.1
Dexuan Cui
maintainerPATCH v2 2/2 hv_balloon: Add the support of hibernation
In reply to Dexuan CuiWhen hibernation is enabled, we must ignore the balloon up/down and hot-add requests from the host, if any.
---
v2 is actually the same as v1. This is just a resend.
I suggest this patch should go through the Hyper-V tree:
https://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux.git/log/?h=hyperv-next
together with
[PATCH v2 1/2] x86/hyperv: Implement hv_is_hibernation_supported()
drivers/hv/hv_balloon.c | 87 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 85 insertions(+), 2 deletions(-)
drivers/hv/hv_balloon.c +85 -2
@@ -25,6 +25,8 @@#include <linux/hyperv.h> #include <asm/hyperv-tlfs.h> +#include <asm/mshyperv.h> +#define CREATE_TRACE_POINTS #include "hv_trace_balloon.h"
@@ -456,6 +458,7 @@ struct hot_add_wrk {struct work_struct wrk; }; +static bool allow_hibernation;static bool hot_add = true;static bool do_hot_add;/*
@@ -1052,8 +1055,12 @@ static void hot_add_req(struct work_struct *dummy)else resp.result =0 ; -if (!do_hot_add || (resp.page_count ==0 )) -pr_err ("Memory hot add failed\n" ); +if (!do_hot_add || resp.page_count ==0 ) { +if (!allow_hibernation) +pr_err ("Memory hot add failed\n" ); +else +pr_info ("Ignore hot-add request!\n" ); + } dm->state =DM_INITIALIZED ; resp.hdr.trans_id =atomic_inc_return (&trans_id);
@@ -1508,6 +1515,11 @@ static void balloon_onchannelcallback(void *context)break ;case DM_BALLOON_REQUEST : +if (allow_hibernation) { +pr_info ("Ignore balloon-up request!\n" ); +break ; + } +if (dm->state ==DM_BALLOON_UP )pr_warn ("Currently ballooning\n" ); bal_msg = (struct dm_balloon *)recv_buffer;
@@ -1517,6 +1529,11 @@ static void balloon_onchannelcallback(void *context)break ;case DM_UNBALLOON_REQUEST : +if (allow_hibernation) { +pr_info ("Ignore balloon-down request!\n" ); +break ; + } + dm->state =DM_BALLOON_DOWN ;balloon_down (dm, (struct dm_unballoon_request *)recv_buffer);
@@ -1622,6 +1639,11 @@ static int balloon_connect_vsp(struct hv_device *dev) cap_msg.hdr.size =sizeof (struct dm_capabilities ); cap_msg.hdr.trans_id =atomic_inc_return (&trans_id); +/* +* When hibernation (i.e. virtual ACPI S4 state) is enabled, the host +* currently still requires the bits to be set, so we have to add code +* to fail the host's hot-add and balloon up/down requests, if any. +*/ cap_msg.caps.cap_bits.balloon =1 ; cap_msg.caps.cap_bits.hot_add =1 ;
@@ -1671,6 +1693,10 @@ static int balloon_probe(struct hv_device *dev, {int ret; + allow_hibernation =hv_is_hibernation_supported (); +if (allow_hibernation) + hot_add = false; +#ifdef CONFIG_MEMORY_HOTPLUG do_hot_add = hot_add;#else
@@ -1710,6 +1736,8 @@ static int balloon_probe(struct hv_device *dev,return 0 ; probe_error: + dm_device.state =DM_INIT_ERROR ; + dm_device.thread =NULL ;vmbus_close (dev->channel);#ifdef CONFIG_MEMORY_HOTPLUG unregister_memory_notifier (&hv_memory_nb);
@@ -1751,6 +1779,59 @@ static int balloon_remove(struct hv_device *dev)return 0 ; } +static int balloon_suspend (struct hv_device *hv_dev) +{ +struct hv_dynmem_device *dm =hv_get_drvdata (hv_dev); + +tasklet_disable (&hv_dev->channel->callback_event); + +cancel_work_sync (&dm->balloon_wrk.wrk); +cancel_work_sync (&dm->ha_wrk.wrk); + +if (dm->thread) { +kthread_stop (dm->thread); + dm->thread =NULL ; +vmbus_close (hv_dev->channel); + } + +tasklet_enable (&hv_dev->channel->callback_event); + +return 0 ; + +} + +static int balloon_resume (struct hv_device *dev) +{ +int ret; + + dm_device.state =DM_INITIALIZING ; + + ret =balloon_connect_vsp (dev); + +if (ret !=0 ) + goto out; + + dm_device.thread = +kthread_run (dm_thread_func, &dm_device,"hv_balloon" ); +if (IS_ERR (dm_device.thread)) { + ret =PTR_ERR (dm_device.thread); + dm_device.thread =NULL ; + goto close_channel; + } + + dm_device.state =DM_INITIALIZED ; +return 0 ; +close_channel: +vmbus_close (dev->channel); +out: + dm_device.state =DM_INIT_ERROR ; +#ifdef CONFIG_MEMORY_HOTPLUG +unregister_memory_notifier (&hv_memory_nb); +restore_online_page_callback (&hv_online_page); +#endif +return ret; +} +static const struct hv_vmbus_device_id id_table[] = {/* Dynamic Memory Class ID */ /* 525074DC-8985-46e2-8057-A307DC18A502 */
@@ -1765,6 +1846,8 @@ static struct hv_driver balloon_drv = { .id_table = id_table, .probe = balloon_probe, .remove = balloon_remove, + .suspend = balloon_suspend, + .resume = balloon_resume, .driver = { .probe_type = PROBE_PREFER_ASYNCHRONOUS, },
Signature · 1 line
2.19.1
Re: [PATCH v2 1/2] x86/hyperv: Implement hv_is_hibernation_supported()
In reply to Dexuan CuiQuoted 9 lines · Dexuan Cui
Once all the vmbus and VSC patches for the hibernation feature are accepted, an extra patch will be submitted to forbid hibernation if the virtual ACPI S4 state is absent, i.e.
hv_is_hibernation_supported()is false.Signed-off-by Dexuan Cui <[email protected]>Reviewed-by Michael Kelley <[email protected]>---
Quoted 7 lines
v2 is actually the same as v1. This is just a resend.
I suggest this patch should go through the Hyper-V tree:
https://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux.git/log/?h=hyperv-next
because it's needed by
[PATCH v2 2/2]hv_balloon: Add the support of hibernation and some upcoming patches.
Sasha Levin
AppliedQuoted 7 lines · Dexuan Cui
v2 is actually the same as v1. This is just a resend.
I suggest both the patches should go through the Hyper-V tree:
https://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux.git/log/?h=hyperv-next
because the first patch is needed by the second one.This first patch doesn't conflict with any patch in the tip.git tree.
Queued for hyperv-next, thanks!
Signature · 2 lines
Thanks, Sasha