PCI: hv: decouple the func definition in hv_dr_state from VSP message
Subsystems (4)
PATCH 1/2 PCI: hv: decouple the func definition in hv_dr_state from VSP message
From: Long Li <[email protected]>
hv_dr_state is used to find present PCI devices on the bus. The structure reuses struct pci_function_description from VSP message to describe a device.
To prepare support for pci_function_description v2, we need to decouple this dependence in hv_dr_state so it can work with both v1 and v2 VSP messages.
There is no functionality change.
--- drivers/pci/controller/pci-hyperv.c | 100 +++++++++++++++++++--------- 1 file changed, 69 insertions(+), 31 deletions(-)
drivers/pci/controller/pci-hyperv.c +69 -31
@@ -507,10 +507,24 @@ struct hv_dr_work {struct hv_pcibus_device *bus; }; +struct hv_pcidev_description { +u16 v_id;/* vendor ID */ +u16 d_id;/* device ID */ +u8 rev; +u8 prog_intf; +u8 subclass; +u8 base_class; +u32 subsystem_id; +union win_slot_encoding win_slot; +u32 ser;/* serial number */ +u32 flags; +u16 virtual_numa_node; +}; +struct hv_dr_state {struct list_head list_entry;u32 device_count; -struct pci_function_description func[0 ]; +struct hv_pcidev_description func[0 ]; };enum hv_pcichild_state {
@@ -527,7 +541,7 @@ struct hv_pci_dev {refcount_t refs;enum hv_pcichild_state state;struct pci_slot *pci_slot; -struct pci_function_description desc; +struct hv_pcidev_description desc;bool reported_missing;struct hv_pcibus_device *hbus;struct work_struct wrk;
@@ -1862,7 +1876,7 @@ static void q_resource_requirements(void *context, struct pci_response *resp,* Return: Pointer to the new tracking struct */ static struct hv_pci_dev *new_pcichild_device (struct hv_pcibus_device *hbus, -struct pci_function_description *desc) +struct hv_pcidev_description *desc) {struct hv_pci_dev *hpdev;struct pci_child_message *res_req;
@@ -1973,7 +1987,7 @@ static void pci_devices_present_work(struct work_struct *work) {u32 child_no;bool found; -struct pci_function_description *new_desc; +struct hv_pcidev_description *new_desc;struct hv_pci_dev *hpdev;struct hv_pcibus_device *hbus;struct list_head removed;
@@ -2090,43 +2104,26 @@ static void pci_devices_present_work(struct work_struct *work)put_hvpcibus (hbus);kfree (dr); } -/** -* hv_pci_devices_present() - Handles list of new children +* hv_pci_start_relations_work() - Queue work to start device discovery * @hbus: Root PCI bus, as understood by this driver -* @relations: Packet from host listing children +* @dr: The list of children returned from host * -* This function is invoked whenever a new list of devices for -* this bus appears. +* Return: 0 on success, 1 on failure */ -static void hv_pci_devices_present (struct hv_pcibus_device *hbus, -struct pci_bus_relations *relations) +static int hv_pci_start_relations_work (struct hv_pcibus_device *hbus, +struct hv_dr_state *dr) { -struct hv_dr_state *dr;struct hv_dr_work *dr_wrk; -unsigned long flags;bool pending_dr; +unsigned long flags; dr_wrk =kzalloc (sizeof (*dr_wrk),GFP_NOWAIT );if (!dr_wrk) -return ; - - dr =kzalloc (offsetof(struct hv_dr_state , func) + - (sizeof (struct pci_function_description ) * - (relations->device_count)),GFP_NOWAIT ); -if (!dr) { -kfree (dr_wrk); -return ; - } +return 1 ;INIT_WORK (&dr_wrk->wrk, pci_devices_present_work); dr_wrk->bus = hbus; - dr->device_count = relations->device_count; -if (dr->device_count !=0 ) { -memcpy (dr->func, relations->func, -sizeof (struct pci_function_description ) * - dr->device_count); - }spin_lock_irqsave (&hbus->device_list_lock, flags);/*
@@ -2144,6 +2141,46 @@ static void hv_pci_devices_present(struct hv_pcibus_device *hbus,get_hvpcibus (hbus);queue_work (hbus->wq, &dr_wrk->wrk); } + +return 0 ; +} + +/** +* hv_pci_devices_present() - Handles list of new children +* @hbus: Root PCI bus, as understood by this driver +* @relations: Packet from host listing children +* +* This function is invoked whenever a new list of devices for +* this bus appears. +*/ +static void hv_pci_devices_present (struct hv_pcibus_device *hbus, +struct pci_bus_relations *relations) +{ +struct hv_dr_state *dr; +int i; + + dr =kzalloc (offsetof(struct hv_dr_state , func) + + (sizeof (struct hv_pcidev_description ) * + (relations->device_count)),GFP_NOWAIT ); + +if (!dr) +return ; + + dr->device_count = relations->device_count; +for (i =0 ; i < dr->device_count; i++) { + dr->func[i].v_id = relations->func[i].v_id; + dr->func[i].d_id = relations->func[i].d_id; + dr->func[i].rev = relations->func[i].rev; + dr->func[i].prog_intf = relations->func[i].prog_intf; + dr->func[i].subclass = relations->func[i].subclass; + dr->func[i].base_class = relations->func[i].base_class; + dr->func[i].subsystem_id = relations->func[i].subsystem_id; + dr->func[i].win_slot = relations->func[i].win_slot; + dr->func[i].ser = relations->func[i].ser; + } + +if (hv_pci_start_relations_work (hbus, dr)) +kfree (dr); }/**
@@ -3018,7 +3055,7 @@ static void hv_pci_bus_exit(struct hv_device *hdev)struct pci_packet teardown_packet;u8 buffer[sizeof (struct pci_message )]; } pkt; -struct pci_bus_relations relations; +struct hv_dr_state *dr;struct hv_pci_compl comp_pkt;int ret;
@@ -3030,8 +3067,9 @@ static void hv_pci_bus_exit(struct hv_device *hdev)return ;/* Delete any children which might still exist. */ -memset (&relations,0 ,sizeof (relations)); -hv_pci_devices_present (hbus, &relations); + dr =kzalloc (sizeof (*dr),GFP_ATOMIC ); +if (dr &&hv_pci_start_relations_work (hbus, dr)) +kfree (dr); ret =hv_send_resources_released (hdev);if (ret)
Signature · 1 line
2.17.1
PATCH 2/2 PCI: hv: Add support for protocol 1.3 and support PCI_BUS_RELATIONS2
From: Long Li <[email protected]>
Starting with Hyper-V PCI protocol version 1.3, the host VSP can send PCI_BUS_RELATIONS2 and pass the vNUMA node information for devices on the bus. The vNUMA node tells which guest NUMA node this device is on based on guest VM configuration topology and physical device inforamtion.
The patch adds code to negotiate v1.3 and process PCI_BUS_RELATIONS2.
--- drivers/pci/controller/pci-hyperv.c | 107 ++++++++++++++++++++++++++++ 1 file changed, 107 insertions(+)
drivers/pci/controller/pci-hyperv.c +107 -0
@@ -63,6 +63,7 @@enum pci_protocol_version_t {PCI_PROTOCOL_VERSION_1_1 =PCI_MAKE_VERSION (1 ,1 ),/* Win10 */ PCI_PROTOCOL_VERSION_1_2 =PCI_MAKE_VERSION (1 ,2 ),/* RS1 */ +PCI_PROTOCOL_VERSION_1_3 =PCI_MAKE_VERSION (1 ,3 ),/* VB */ };#define CPU_AFFINITY_ALL -1ULL
@@ -72,6 +73,7 @@ enum pci_protocol_version_t {* first. */ static enum pci_protocol_version_t pci_protocol_versions[] = { +PCI_PROTOCOL_VERSION_1_3 ,PCI_PROTOCOL_VERSION_1_2 ,PCI_PROTOCOL_VERSION_1_1 , };
@@ -124,6 +126,7 @@ enum pci_message_type {PCI_RESOURCES_ASSIGNED2 =PCI_MESSAGE_BASE +0x16 ,PCI_CREATE_INTERRUPT_MESSAGE2 =PCI_MESSAGE_BASE +0x17 ,PCI_DELETE_INTERRUPT_MESSAGE2 =PCI_MESSAGE_BASE +0x18 ,/* unused */ +PCI_BUS_RELATIONS2 =PCI_MESSAGE_BASE +0x19 , PCI_MESSAGE_MAXIMUM };
@@ -169,6 +172,26 @@ struct pci_function_description {u32 ser;/* serial number */ } __packed; +enum pci_device_description_flags { +HV_PCI_DEVICE_FLAG_NONE =0x0 , +HV_PCI_DEVICE_FLAG_NUMA_AFFINITY =0x1 , +}; + +struct pci_function_description2 { +u16 v_id;/* vendor ID */ +u16 d_id;/* device ID */ +u8 rev; +u8 prog_intf; +u8 subclass; +u8 base_class; +u32 subsystem_id; +union win_slot_encoding win_slot; +u32 ser;/* serial number */ +u32 flags; +u16 virtual_numa_node; +u16 reserved; +} __packed; +/** * struct hv_msi_desc * @vector: IDT entry
@@ -304,6 +327,12 @@ struct pci_bus_relations {struct pci_function_description func[0 ]; } __packed; +struct pci_bus_relations2 { +struct pci_incoming_message incoming; +u32 device_count; +struct pci_function_description2 func[0 ]; +} __packed; +struct pci_q_res_req_response {struct vmpacket_descriptor hdr;s32 status;/* negative values are failures */
@@ -1417,6 +1446,7 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)break ;case PCI_PROTOCOL_VERSION_1_2 : +case PCI_PROTOCOL_VERSION_1_3 : size = hv_compose_msi_req_v2(&ctxt.int_pkts.v2, dest, hpdev->desc.win_slot.slot,
@@ -1798,6 +1828,25 @@ static void hv_pci_remove_slots(struct hv_pcibus_device *hbus) } } +/* +* Set NUMA node for the devices on the bus +*/ +static void pci_assign_numa_node (struct hv_pcibus_device *hbus) +{ +struct pci_dev *dev; +struct pci_bus *bus = hbus->pci_bus; +struct hv_pci_dev *hv_dev; + +list_for_each_entry (dev, &bus->devices, bus_list) { + hv_dev =get_pcichild_wslot (hbus,devfn_to_wslot (dev->devfn)); +if (!hv_dev) +continue ; + +if (hv_dev->desc.flags &HV_PCI_DEVICE_FLAG_NUMA_AFFINITY ) +set_dev_node (&dev->dev, hv_dev->desc.virtual_numa_node); + } +} +/** * create_root_hv_pci_bus() - Expose a new root PCI bus * @hbus: Root PCI bus, as understood by this driver
@@ -1820,6 +1869,7 @@ static int create_root_hv_pci_bus(struct hv_pcibus_device *hbus)pci_lock_rescan_remove ();pci_scan_child_bus (hbus->pci_bus); +pci_assign_numa_node (hbus);pci_bus_assign_resources (hbus->pci_bus);hv_pci_assign_slots (hbus);pci_bus_add_devices (hbus->pci_bus);
@@ -2088,6 +2138,7 @@ static void pci_devices_present_work(struct work_struct *work)*/ pci_lock_rescan_remove ();pci_scan_child_bus (hbus->pci_bus); +pci_assign_numa_node (hbus);hv_pci_assign_slots (hbus);pci_unlock_rescan_remove ();break ;
@@ -2183,6 +2234,46 @@ static void hv_pci_devices_present(struct hv_pcibus_device *hbus,kfree (dr); } +/** +* hv_pci_devices_present2() - Handles list of new children +* @hbus: Root PCI bus, as understood by this driver +* @relations2: Packet from host listing children +* +* This function is the v2 version of hv_pci_devices_present() +*/ +static void hv_pci_devices_present2 (struct hv_pcibus_device *hbus, +struct pci_bus_relations2 *relations) +{ +struct hv_dr_state *dr; +int i; + + dr =kzalloc (offsetof(struct hv_dr_state , func) + + (sizeof (struct hv_pcidev_description ) * + (relations->device_count)),GFP_NOWAIT ); + +if (!dr) +return ; + + dr->device_count = relations->device_count; +for (i =0 ; i < dr->device_count; i++) { + dr->func[i].v_id = relations->func[i].v_id; + dr->func[i].d_id = relations->func[i].d_id; + dr->func[i].rev = relations->func[i].rev; + dr->func[i].prog_intf = relations->func[i].prog_intf; + dr->func[i].subclass = relations->func[i].subclass; + dr->func[i].base_class = relations->func[i].base_class; + dr->func[i].subsystem_id = relations->func[i].subsystem_id; + dr->func[i].win_slot = relations->func[i].win_slot; + dr->func[i].ser = relations->func[i].ser; + dr->func[i].flags = relations->func[i].flags; + dr->func[i].virtual_numa_node = + relations->func[i].virtual_numa_node; + } + +if (hv_pci_start_relations_work (hbus, dr)) +kfree (dr); +} +/** * hv_eject_device_work() - Asynchronously handles ejection * @work: Work struct embedded in internal device struct
@@ -2288,6 +2379,7 @@ static void hv_pci_onchannelcallback(void *context)struct pci_response *response;struct pci_incoming_message *new_message;struct pci_bus_relations *bus_rel; +struct pci_bus_relations2 *bus_rel2;struct pci_dev_inval_block *inval;struct pci_dev_incoming *dev_message;struct hv_pci_dev *hpdev;
@@ -2355,6 +2447,21 @@ static void hv_pci_onchannelcallback(void *context)hv_pci_devices_present (hbus, bus_rel);break ; +case PCI_BUS_RELATIONS2 : + + bus_rel2 = (struct pci_bus_relations2 *)buffer; +if (bytes_recvd < + offsetof(struct pci_bus_relations2 , func) + + (sizeof (struct pci_function_description2 ) * + (bus_rel2->device_count))) { +dev_err (&hbus->hdev->device, +"bus relations v2 too small\n" ); +break ; + } + +hv_pci_devices_present2 (hbus, bus_rel2); +break ; +case PCI_EJECT : dev_message = (struct pci_dev_incoming *)buffer;
Signature · 1 line
2.17.1
From: [email protected] Sent: Friday, November 22, 2019 5:57 PM
Quoted 9 lines
From: Long Li <[email protected]>
hv_dr_stateis used to find present PCI devices on the bus. The structure reuses structpci_function_descriptionfrom VSP message to describe a device.To prepare support for
pci_function_descriptionv2, we need to decouple this dependence inhv_dr_stateso it can work with both v1 and v2 VSP messages.
Quoted 7 lines
There is no functionality change.
Signed-off-by Long Li <[email protected]>--- drivers/pci/controller/pci-hyperv.c | 100 +++++++++++++++++++--------- 1 file changed, 69 insertions(+), 31 deletions(-)
RE: [EXTERNAL] [PATCH 2/2] PCI: hv: Add support for protocol 1.3 and support PCI_BUS_RELATIONS2
In reply to [email protected]From: [email protected] Sent: Friday, November 22, 2019 5:57 PM
Quoted 15 lines
From: Long Li <[email protected]>
Starting with Hyper-V PCI protocol version 1.3, the host VSP can send
PCI_BUS_RELATIONS2and pass the vNUMA node information for devices on the bus. The vNUMA node tells which guest NUMA node this device is on based on guest VM configuration topology and physical device inforamtion.The patch adds code to negotiate v1.3 and process
PCI_BUS_RELATIONS2.Signed-off-by Long Li <[email protected]>--- drivers/pci/controller/pci-hyperv.c | 107 ++++++++++++++++++++++++++++ 1 file changed, 107 insertions(+)
[snip]
Quoted 9 lines
drivers/pci/controller/pci-hyperv.c +9
-0+/* +* Set NUMA node for the devices on the bus +*/ +static void pci_assign_numa_node (struct hv_pcibus_device *hbus) +{ +struct pci_dev *dev; +struct pci_bus *bus = hbus->pci_bus; +struct hv_pci_dev *hv_dev; +
drivers/pci/controller/pci-hyperv.c static void hv_pci_remove_slots(struct hv_pcibus_device *hbus) · line 1849
Quoted 10 lines
drivers/pci/controller/pci-hyperv.c +10
-0+list_for_each_entry (dev, &bus->devices, bus_list) { + hv_dev =get_pcichild_wslot (hbus,devfn_to_wslot (dev->devfn)); +if (!hv_dev) +continue ; + +if (hv_dev->desc.flags &HV_PCI_DEVICE_FLAG_NUMA_AFFINITY ) +set_dev_node (&dev->dev, hv_dev->desc.virtual_numa_node); + } +} +
get_pcichild_wslot() gets a reference to the hv_dev, so a call to put_pcichild() is needed to balance.
But more broadly, is the call to set_dev_node() operating on the correct struct device? There's a struct device in the struct hv_device, and also one in the struct pci_dev. Everything in this module seems to be operating on the former. For example, all the dev_err() calls identify the struct device in struct hv_device. And enumerating all the devices on a virtual PCI bus is done by iterating through the hbus->children list, not the bus->devices list. I don't completely understand the interplay between the two struct device entries, but the difference makes me wonder if the above code should be setting the NUMA node on the struct device that's in struct hv_device.
Michael
RE: [EXTERNAL] [PATCH 2/2] PCI: hv: Add support for protocol 1.3 and support PCI_BUS_RELATIONS2
Quoted 39 lines
Subject: RE: [EXTERNAL] [PATCH 2/2] PCI: hv: Add support for protocol 1.3 and support
PCI_BUS_RELATIONS2From: [email protected] Sent: Friday, November 22, 2019 5:57 PM
Quoted 5 lines
From: Long Li <[email protected]>
Starting with Hyper-V PCI protocol version 1.3, the host VSP can send
PCI_BUS_RELATIONS2and pass the vNUMA node information for deviceson the bus.
Quoted 11 lines
The vNUMA node tells which guest NUMA node this device is on based on guest VM configuration topology and physical device inforamtion.
The patch adds code to negotiate v1.3 and process
PCI_BUS_RELATIONS2.Signed-off-by Long Li <[email protected]>--- drivers/pci/controller/pci-hyperv.c | 107 ++++++++++++++++++++++++++++ 1 file changed, 107 insertions(+)[snip]
Quoted 10 lines
drivers/pci/controller/pci-hyperv.c +9
-0+/* +* Set NUMA node for the devices on the bus */ static void +pci_assign_numa_node (struct hv_pcibus_device *hbus) { +struct pci_dev *dev; +struct pci_bus *bus = hbus->pci_bus; +struct hv_pci_dev *hv_dev; + +list_for_each_entry (dev, &bus->devices, bus_list) { + hv_dev = get_pcichild_wslot(hbus, devfn_to_wslot(dev-devfn));
drivers/pci/controller/pci-hyperv.c static void hv_pci_remove_slots(struct hv_pcibus_device *hbus)
Quoted 4 lines
drivers/pci/controller/pci-hyperv.c +4
-0+if (!hv_dev) +continue ; + + if (hv_dev->desc.flags &
HV_PCI_DEVICE_FLAG_NUMA_AFFINITY)
Quoted 8 lines
drivers/pci/controller/pci-hyperv.c static void hv_pci_remove_slots(struct hv_pcibus_device *hbus) · line 1849
Quoted 5 lines
(quoted diff) +1
-0+ set_dev_node(&dev->dev, hv_dev-desc.virtual_numa_node);
drivers/pci/controller/pci-hyperv.c +3
-0+ } +} +
get_pcichild_wslot()gets a reference to thehv_dev, so a call toput_pcichild()is needed to balance.
Thanks for pointing this out! I will send v2 to fix this.
Quoted 12 lines
But more broadly, is the call to
set_dev_node()operating on the correct struct device? There's a struct device in the structhv_device, and also one in the structpci_dev. Everything in this module seems to be operating on the former.
For example, all thedev_err()calls identify the struct device in structhv_device.
And enumerating all the devices on a virtual PCI bus is done by iterating through thehbus->childrenlist, not thebus->deviceslist. I don't completely understand the interplay between the two struct device entries, but the difference makes me wonder if the above code should be setting the NUMA node on the struct device that's in structhv_device.
There are two "bus" variables in this function. "bus" is a "struct pci_bus" from the PCI layer. "hbus" is a "struct hv_pcibus_device" defined in pci-hyperv.
The parameter passed to set_dev_node is &dev->dev, the dev is enumerated from bus->devices. So dev (struct pci_dev) is from the PCI layer, this function sets the node on the device that will be used to probe and load its corresponding driver.
There is a separate list of hbus->children. It's represents pci-hyperv's view of devices on its bus. pci-hyperv presents those devices to PCI layer when pci_scan_child_bus() is called.
Long
Dexuan Cui
maintainerdrivers/pci/controller/pci-hyperv.c struct hv_dr_work { · line 518
Quoted 12 lines
From: [email protected]
Sent: Friday, November 22, 2019 5:57 PM
...drivers/pci/controller/pci-hyperv.c +9
-0+struct hv_pcidev_description { +u16 v_id;/* vendor ID */ +u16 d_id;/* device ID */ +u8 rev; +u8 prog_intf; +u8 subclass; +u8 base_class; +u32 subsystem_id; +union win_slot_encoding win_slot;
Change the spact to a TAB? :-)
Quoted 11 lines
/**
- *hv_pci_devices_present()- Handles list of new children
+ *hv_pci_start_relations_work()- Queue work to start device discovery
* @hbus: Root PCI bus, as understood by this driver
- * @relations: Packet from host listing children
+ * @dr: The list of children returned from host
*
- * This function is invoked whenever a new list of devices for
- * this bus appears.
+ * Return: 0 on success, 1 on failure
*/
Usually we return a negative value upon error, if possible.
Quoted 13 lines
drivers/pci/controller/pci-hyperv.c +3
-4-static void hv_pci_devices_present (struct hv_pcibus_device *hbus, -struct pci_bus_relations *relations) +static int hv_pci_start_relations_work (struct hv_pcibus_device *hbus, +struct hv_dr_state *dr) { -struct hv_dr_state *dr;struct hv_dr_work *dr_wrk; -unsigned long flags;bool pending_dr; +unsigned long flags; dr_wrk =kzalloc (sizeof (*dr_wrk),GFP_NOWAIT );if (!dr_wrk)
drivers/pci/controller/pci-hyperv.c static void pci_devices_present_work(struct work_struct *work) · line 2123
Quoted 10 lines
drivers/pci/controller/pci-hyperv.c +1
-9-return ; - - dr =kzalloc (offsetof(struct hv_dr_state , func) + - (sizeof (struct pci_function_description ) * - (relations->device_count)),GFP_NOWAIT ); -if (!dr) { -kfree (dr_wrk); -return ; - } +return 1 ;
How about "return -ENOMEM;" ?
Quoted 10 lines
drivers/pci/controller/pci-hyperv.c +1
-1@@ -3018,7 +3055,7 @@ static void hv_pci_bus_exit(struct hv_device *hdev)struct pci_packet teardown_packet;u8 buffer[sizeof (struct pci_message )]; } pkt; -struct pci_bus_relations relations; +struct hv_dr_state *dr;struct hv_pci_compl comp_pkt;int ret;
drivers/pci/controller/pci-hyperv.c static void hv_pci_bus_exit(struct hv_device *hdev) · line 3070
Quoted 6 lines
drivers/pci/controller/pci-hyperv.c +1
-2@@ -3030,8 +3067,9 @@ static void hv_pci_bus_exit(struct hv_device *hdev)return ;/* Delete any children which might still exist. */ -memset (&relations,0 ,sizeof (relations)); -hv_pci_devices_present (hbus, &relations); + dr =kzalloc (sizeof (*dr),GFP_ATOMIC );
Here we are in a process context, so GFP_KERNEL is preferred.
drivers/pci/controller/pci-hyperv.c static void hv_pci_bus_exit(struct hv_device *hdev) · line 3072
Quoted 2 lines
drivers/pci/controller/pci-hyperv.c +2
-0+if (dr &&hv_pci_start_relations_work (hbus, dr)) +kfree (dr);
Thanks,
-- Dexuan
Dexuan Cui
maintainerRE: [EXTERNAL] [PATCH 2/2] PCI: hv: Add support for protocol 1.3 and support PCI_BUS_RELATIONS2
In reply to [email protected]drivers/pci/controller/pci-hyperv.c line 68
Quoted 10 lines
From: [email protected]
Sent: Friday, November 22, 2019 5:57 PM
...drivers/pci/controller/pci-hyperv.c +1
-0@@ -63,6 +63,7 @@enum pci_protocol_version_t {PCI_PROTOCOL_VERSION_1_1 =PCI_MAKE_VERSION (1 ,1 ),/* Win10 */ PCI_PROTOCOL_VERSION_1_2 =PCI_MAKE_VERSION (1 ,2 ),/* RS1 */ +PCI_PROTOCOL_VERSION_1_3 =PCI_MAKE_VERSION (1 ,3 ),/* VB */ };
What is "VB" ? Can we use a more meaningful name here? :-)
drivers/pci/controller/pci-hyperv.c struct pci_function_description { · line 188
Quoted 9 lines
drivers/pci/controller/pci-hyperv.c +9
-0+struct pci_function_description2 { +u16 v_id;/* vendor ID */ +u16 d_id;/* device ID */ +u8 rev; +u8 prog_intf; +u8 subclass; +u8 base_class; +u32 subsystem_id; +union win_slot_encoding win_slot;
space -> TAB?
drivers/pci/controller/pci-hyperv.c static void hv_pci_remove_slots(struct hv_pcibus_device *hbus) · line 1834
Quoted 4 lines
drivers/pci/controller/pci-hyperv.c +4
-0+/* +* Set NUMA node for the devices on the bus +*/ +static void pci_assign_numa_node (struct hv_pcibus_device *hbus)
IMO we'd better add a "hv_" prefix to this function's name, otherwise it looks more like a generic PCI subsystem API.
Quoted 4 lines
drivers/pci/controller/pci-hyperv.c +4
-0+{ +struct pci_dev *dev; +struct pci_bus *bus = hbus->pci_bus; +struct hv_pci_dev *hv_dev;
drivers/pci/controller/pci-hyperv.c static void hv_pci_remove_slots(struct hv_pcibus_device *hbus) · line 1848
Quoted 10 lines
drivers/pci/controller/pci-hyperv.c +10
-0+ +list_for_each_entry (dev, &bus->devices, bus_list) { + hv_dev =get_pcichild_wslot (hbus,devfn_to_wslot (dev->devfn)); +if (!hv_dev) +continue ; + +if (hv_dev->desc.flags &HV_PCI_DEVICE_FLAG_NUMA_AFFINITY ) +set_dev_node (&dev->dev, hv_dev->desc.virtual_numa_node); + } +}
Can you please give a brief background introduction to dev->numa_node, e.g. how is it used here? -- is it used when a PCI device driver (e.g. the mlx driver) asks the kernel to allocate memory for DMA, or allocate MSI interrupts? How big is the performance gain in the tests? I'm curious as it looks unclear to me how dev->numa_node is used by the PCI subsystem.
Thanks,
-- Dexuan
Quoted 79 lines
Subject: RE: [EXTERNAL] [PATCH 1/2] PCI: hv: decouple the func definition in
hv_dr_statefrom VSP messagedrivers/pci/controller/pci-hyperv.c struct hv_dr_work { · line 518
Quoted 11 lines
From: [email protected]
Sent: Friday, November 22, 2019 5:57 PM ...drivers/pci/controller/pci-hyperv.c +9
-0+struct hv_pcidev_description { +u16 v_id;/* vendor ID */ +u16 d_id;/* device ID */ +u8 rev; +u8 prog_intf; +u8 subclass; +u8 base_class; +u32 subsystem_id; +union win_slot_encoding win_slot;Change the spact to a TAB? :-)
Quoted 4 lines
/**
- *hv_pci_devices_present()- Handles list of new children
+ *hv_pci_start_relations_work()- Queue work to start device
+ discoveryQuoted 8 lines
* @hbus: Root PCI bus, as understood by this driver
- * @relations: Packet from host listing children
+ * @dr: The list of children returned from host
*
- * This function is invoked whenever a new list of devices for
- * this bus appears.
+ * Return: 0 on success, 1 on failure
*/Usually we return a negative value upon error, if possible.
Quoted 13 lines
drivers/pci/controller/pci-hyperv.c +3
-4-static void hv_pci_devices_present (struct hv_pcibus_device *hbus, -struct pci_bus_relations *relations) +static int hv_pci_start_relations_work (struct hv_pcibus_device *hbus, +struct hv_dr_state *dr) { -struct hv_dr_state *dr;struct hv_dr_work *dr_wrk; -unsigned long flags;bool pending_dr; +unsigned long flags; dr_wrk =kzalloc (sizeof (*dr_wrk),GFP_NOWAIT );if (!dr_wrk)drivers/pci/controller/pci-hyperv.c static void pci_devices_present_work(struct work_struct *work) · line 2123
Quoted 10 lines
drivers/pci/controller/pci-hyperv.c +1
-9-return ; - - dr =kzalloc (offsetof(struct hv_dr_state , func) + - (sizeof (struct pci_function_description ) * - (relations->device_count)),GFP_NOWAIT ); -if (!dr) { -kfree (dr_wrk); -return ; - } +return 1 ;How about "return
-ENOMEM;" ?Review static void hv_pci_bus_exit(struct hv_device
Quoted 1 line
(quoted diff) +0
-0@@ -3018,7 +3055,7 @@ static void hv_pci_bus_exit(struct hv_device*hdev)
drivers/pci/controller/pci-hyperv.c static void hv_pci_bus_exit(struct hv_device
Quoted 9 lines
drivers/pci/controller/pci-hyperv.c +1
-1struct pci_packet teardown_packet;u8 buffer[sizeof (struct pci_message )]; } pkt; -struct pci_bus_relations relations; +struct hv_dr_state *dr;struct hv_pci_compl comp_pkt;int ret;@@ -3030,8 +3067,9 @@ static void hv_pci_bus_exit(struct hv_device*hdev)
drivers/pci/controller/pci-hyperv.c static void hv_pci_bus_exit(struct hv_device *hdev) · line 3070
Quoted 6 lines
drivers/pci/controller/pci-hyperv.c +1
-2return ;/* Delete any children which might still exist. */ -memset (&relations,0 ,sizeof (relations)); -hv_pci_devices_present (hbus, &relations); + dr =kzalloc (sizeof (*dr),GFP_ATOMIC );Here we are in a process context, so
GFP_KERNELis preferred.
Quoted 5 lines
drivers/pci/controller/pci-hyperv.c static void hv_pci_bus_exit(struct hv_device *hdev) · line 3072
Quoted 2 lines
drivers/pci/controller/pci-hyperv.c +2
-0+if (dr &&hv_pci_start_relations_work (hbus, dr)) +kfree (dr);Thanks,
-- Dexuan
Thanks! I will send v2 to address those comments.
Long
RE: [EXTERNAL] [PATCH 2/2] PCI: hv: Add support for protocol 1.3 and support PCI_BUS_RELATIONS2
In reply to Dexuan CuiQuoted 9 lines
Subject: RE: [EXTERNAL] [PATCH 2/2] PCI: hv: Add support for protocol 1.3 and support
PCI_BUS_RELATIONS2Review line 64
Quoted 5 lines
From: [email protected]
Sent: Friday, November 22, 2019 5:57 PM ...(quoted diff) +0
-0@@ -63,6 +63,7 @@ enum pci_protocol_version_t { PCI_PROTOCOL_VERSION_1_1 = PCI_MAKE_VERSION(1, 1), /*Win10
Quoted 8 lines
Review line 66
Quoted 2 lines
(quoted diff) +0
-0*/ PCI_PROTOCOL_VERSION_1_2 = PCI_MAKE_VERSION(1, 2), /* RS1*/
Review line 67
Quoted 1 line
(quoted diff) +1
-0+ PCI_PROTOCOL_VERSION_1_3 = PCI_MAKE_VERSION(1, 3), /* VB*/
Review line 68
Quoted 1 line
(quoted diff) +0
-0};What is "VB" ? Can we use a more meaningful name here? :-)
Vibranium.
Quoted 13 lines
drivers/pci/controller/pci-hyperv.c struct pci_function_description { · line 188
Quoted 10 lines
drivers/pci/controller/pci-hyperv.c +9
-0+struct pci_function_description2 { +u16 v_id;/* vendor ID */ +u16 d_id;/* device ID */ +u8 rev; +u8 prog_intf; +u8 subclass; +u8 base_class; +u32 subsystem_id; +union win_slot_encoding win_slot;space -> TAB?
Quoted 6 lines
Review
Quoted 3 lines
(quoted diff) +3
-0+/* + * Set NUMA node for the devices on the bus */ static void +pci_assign_numa_node(struct hv_pcibus_device *hbus)IMO we'd better add a "
hv_" prefix to this function's name, otherwise it looks more like a generic PCI subsystem API.
I will send v2 to address comments above.
Quoted 14 lines
drivers/pci/controller/pci-hyperv.c static void hv_pci_remove_slots(struct hv_pcibus_device *hbus)
Quoted 13 lines
drivers/pci/controller/pci-hyperv.c +7
-0+{ +struct pci_dev *dev; +struct pci_bus *bus = hbus->pci_bus; +struct hv_pci_dev *hv_dev; + +list_for_each_entry (dev, &bus->devices, bus_list) { + hv_dev = get_pcichild_wslot(hbus, devfn_to_wslot(dev-devfn));
drivers/pci/controller/pci-hyperv.c +4
-0+if (!hv_dev) +continue ; + + if (hv_dev->desc.flags &
HV_PCI_DEVICE_FLAG_NUMA_AFFINITY)
Quoted 10 lines
Review
Quoted 4 lines
(quoted diff) +1
-0+ set_dev_node(&dev->dev, hv_dev-desc.virtual_numa_node);
(quoted diff) +2
-0+ } +}Can you please give a brief background introduction to
dev->numa_node, e.g. how is it used here? -- is it used when a PCI device driver (e.g. the mlx driver) asks the kernel to allocate memory for DMA, or allocate MSI interrupts? How big is the performance gain in the tests? I'm curious as it looks unclear to me howdev->numa_nodeis used by the PCI subsystem.
numa_node can be used by a device driver (if it's numa aware) to setup its internal data structures and allocate its MSI.
As an example, you can look at "drivers/net/ethernet/mellanox/mlx4/main.c: mlx4_load_one()":
It stores the value at : dev->numa_node = dev_to_node(&pdev->dev);
after that, dev->numa_node is used through driver.
numa_node is also exported though /sys to user-mode, so a NUMA aware application (e.g. MPI) can figure out how to pin itself to selected CPUs for the best latency.
Quoted 3 lines
Thanks,
-- Dexuan