drm/amd/powerplay: sw ctf for arcturus
Subsystems (2)
PATCH v2 1/1 drm/amd/powerplay: sw ctf for arcturus
change the sw ctf setting to smu_v11_0_set_thermal_range() since software_shutdown_temp shares the same definition and name in all the smu11 project.
--- drivers/gpu/drm/amd/powerplay/smu_v11_0.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/powerplay/smu_v11_0.c +3 -2
@@ -1154,11 +1154,12 @@ static int smu_v11_0_set_thermal_range(struct smu_context *smu,int low =SMU_THERMAL_MINIMUM_ALERT_TEMP ;int high =SMU_THERMAL_MAXIMUM_ALERT_TEMP ;uint32_t val; +struct smu_table_context *table_context = &smu->smu_table; +struct smu_11_0_powerplay_table *powerplay_table = table_context->power_play_table; low =max (SMU_THERMAL_MINIMUM_ALERT_TEMP , range.min /SMU_TEMPERATURE_UNITS_PER_CENTIGRADES ); - high =min (SMU_THERMAL_MAXIMUM_ALERT_TEMP , - range.max /SMU_TEMPERATURE_UNITS_PER_CENTIGRADES ); + high =min (SMU_THERMAL_MAXIMUM_ALERT_TEMP , powerplay_table->software_shutdown_temp);if (low > high)return -EINVAL ;
Signature · 6 lines
2.7.4 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
Quoted 43 lines
-----Original Message-----
From: Kenneth Feng <[email protected]>
Sent: Thursday, January 9, 2020 3:13 PM
To: [email protected]
Cc: Quan, Evan <[email protected]>; Feng, Kenneth <[email protected]>
Subject: [PATCH v2] drm/amd/powerplay: sw ctf for arcturuschange the sw ctf setting to
smu_v11_0_set_thermal_range()sincesoftware_shutdown_tempshares the same definition and name in all the smu11 project.Signed-off-by Kenneth Feng <[email protected]>--- drivers/gpu/drm/amd/powerplay/smu_v11_0.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)drivers/gpu/drm/amd/powerplay/smu_v11_0.c +2
-2@@ -1154,11 +1154,12 @@ static int smu_v11_0_set_thermal_range(structsmu_context *smu, int low = SMU_THERMAL_MINIMUM_ALERT_TEMP;int high =SMU_THERMAL_MAXIMUM_ALERT_TEMP ;uint32_t val; +struct smu_table_context *table_context = &smu->smu_table; +struct smu_11_0_powerplay_table *powerplay_table = table_context- >power_play_table; low =max (SMU_THERMAL_MINIMUM_ALERT_TEMP , range.min /SMU_TEMPERATURE_UNITS_PER_CENTIGRADES ); - high = min(SMU_THERMAL_MAXIMUM_ALERT_TEMP, - range.max /
SMU_TEMPERATURE_UNITS_PER_CENTIGRADES);drivers/gpu/drm/amd/powerplay/smu_v11_0.c +1
-0+ high = min(SMU_THERMAL_MAXIMUM_ALERT_TEMP,
powerplay_table->software_shutdown_temp);drivers/gpu/drm/amd/powerplay/smu_v11_0.c +0
-1if (low > high)return -EINVAL ; --
Quoted 1 line
2.7.4
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx