ima: add a new CONFIG for loading arch-specific policies
Subsystems (8)
PATCH v3 1/1 ima: add a new CONFIG for loading arch-specific policies
Every time a new architecture defines the IMA architecture specific functions - arch_ima_get_secureboot() and arch_ima_get_policy(), the IMA include file needs to be updated. To avoid this "noise", this patch defines a new IMA Kconfig IMA_SECURE_AND_OR_TRUSTED_BOOT option, allowing the different architectures to select it.
---
v3:
* Updated and tested the patch with improvements suggested by Michael. It now uses "imply" instead of "select". Thanks Michael.
* Have missed replacing the CONFIG_IMA in x86 and s390 with new config, that was resulting in redefinition when the IMA_SECURE_AND_OR_TRUSTED_BOOT is not enabled. Thanks to Mimi for recognizing the problem.
v2:
* Fixed the issue identified by Mimi. Thanks Mimi, Ard, Heiko and Michael for discussing the fix.
arch/powerpc/Kconfig | 1 + arch/s390/Kconfig | 1 + arch/s390/kernel/Makefile | 2 +- arch/x86/Kconfig | 1 + arch/x86/kernel/Makefile | 2 +- include/linux/ima.h | 3 +-- security/integrity/ima/Kconfig | 8 ++++++++ 7 files changed, 14 insertions(+), 4 deletions(-)
arch/powerpc/Kconfig +1 -0
@@ -979,6 +979,7 @@ config PPC_SECURE_BOOT bool depends on PPC_POWERNV depends on IMA_ARCH_POLICY + select IMA_SECURE_AND_OR_TRUSTED_BOOT help Systems with firmware secure boot enabled need to define security policies to extend secure boot to the OS. This config allows a user
arch/s390/Kconfig +1 -0
@@ -195,6 +195,7 @@ config S390 select ARCH_HAS_FORCE_DMA_UNENCRYPTED select SWIOTLB select GENERIC_ALLOCATOR + select IMA_SECURE_AND_OR_TRUSTED_BOOT if IMA_ARCH_POLICY config SCHED_OMIT_FRAME_POINTER
arch/s390/kernel/Makefile +1 -1
@@ -70,7 +70,7 @@ obj-$(CONFIG_JUMP_LABEL) += jump_label.o obj-$(CONFIG_KEXEC_FILE) += machine_kexec_file.o kexec_image.o obj-$(CONFIG_KEXEC_FILE) += kexec_elf.o -obj-$(CONFIG_IMA) += ima_arch.o +obj-$(CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT) += ima_arch.o obj-$(CONFIG_PERF_EVENTS) += perf_event.o perf_cpum_cf_common.o obj-$(CONFIG_PERF_EVENTS) += perf_cpum_cf.o perf_cpum_sf.o
arch/x86/Kconfig +1 -0
@@ -230,6 +230,7 @@ config X86 select VIRT_TO_BUS select X86_FEATURE_NAMES if PROC_FS select PROC_PID_ARCH_STATUS if PROC_FS + select IMA_SECURE_AND_OR_TRUSTED_BOOT if EFI && IMA_ARCH_POLICY config INSTRUCTION_DECODER def_bool y
arch/x86/kernel/Makefile +1 -1
@@ -155,5 +155,5 @@ ifeq ($(CONFIG_X86_64),y) endif ifdef CONFIG_EFI -obj-$(CONFIG_IMA) += ima_arch.o +obj-$(CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT) += ima_arch.o endif
include/linux/ima.h +1 -2
@@ -30,8 +30,7 @@ extern void ima_kexec_cmdline(const void *buf, int size);extern void ima_add_kexec_buffer (struct kimage *image);#endif -#if (defined(CONFIG_X86 ) && defined(CONFIG_EFI )) || defined(CONFIG_S390 ) \ - || defined(CONFIG_PPC_SECURE_BOOT ) +#ifdef CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT extern bool arch_ima_get_secureboot (void );extern const char *const *arch_get_ima_policy (void );#else
security/integrity/ima/Kconfig +8 -0
@@ -327,3 +327,11 @@ config IMA_QUEUE_EARLY_BOOT_KEYS depends on IMA_MEASURE_ASYMMETRIC_KEYS depends on SYSTEM_TRUSTED_KEYRING default y + +config IMA_SECURE_AND_OR_TRUSTED_BOOT + bool + depends on IMA_ARCH_POLICY + default n + help + This option is selected by architectures to enable secure and/or + trusted boot based on IMA runtime policies.
Signature · 1 line
2.18.1
Oops, Please ignore this patch.
By mistake I posted the wrong version. I am sorry for the confusion, I will resend the right version.
Thanks & Regards,
- Nayna
Quoted 122 lines · Nayna Jain
Every time a new architecture defines the IMA architecture specific functions -
arch_ima_get_secureboot()andarch_ima_get_policy(), the IMA include file needs to be updated. To avoid this "noise", this patch defines a new IMAKconfigIMA_SECURE_AND_OR_TRUSTED_BOOToption, allowing the different architectures to select it.Suggested-by Linus Torvalds <[email protected]>Signed-off-by Nayna Jain <[email protected]>Cc Ard Biesheuvel <[email protected]>Cc Philipp Rudo <[email protected]>Cc Michael Ellerman <[email protected]>---
v3:
* Updated and tested the patch with improvements suggested by Michael. It now uses "imply" instead of "select". Thanks Michael.
* Have missed replacing theCONFIG_IMAin x86 and s390 with new config, that was resulting in redefinition when theIMA_SECURE_AND_OR_TRUSTED_BOOTis not enabled. Thanks to Mimi for recognizing the problem.v2:
* Fixed the issue identified by Mimi. Thanks Mimi, Ard, Heiko and Michael for discussing the fix.arch/powerpc/Kconfig | 1 + arch/s390/Kconfig | 1 + arch/s390/kernel/Makefile | 2 +- arch/x86/Kconfig | 1 + arch/x86/kernel/Makefile | 2 +- include/linux/ima.h | 3 +-- security/integrity/ima/Kconfig | 8 ++++++++ 7 files changed, 14 insertions(+), 4 deletions(-)arch/powerpc/Kconfig +1
-0@@ -979,6 +979,7 @@ config PPC_SECURE_BOOT bool depends on PPC_POWERNV depends on IMA_ARCH_POLICY + select IMA_SECURE_AND_OR_TRUSTED_BOOT help Systems with firmware secure boot enabled need to define security policies to extend secure boot to the OS. This config allows a userarch/s390/Kconfig +1
-0@@ -195,6 +195,7 @@ config S390 select ARCH_HAS_FORCE_DMA_UNENCRYPTED select SWIOTLB select GENERIC_ALLOCATOR + select IMA_SECURE_AND_OR_TRUSTED_BOOT if IMA_ARCH_POLICY config SCHED_OMIT_FRAME_POINTERarch/s390/kernel/Makefile +1
-1@@ -70,7 +70,7 @@ obj-$(CONFIG_JUMP_LABEL) += jump_label.o obj-$(CONFIG_KEXEC_FILE) += machine_kexec_file.o kexec_image.o obj-$(CONFIG_KEXEC_FILE) += kexec_elf.o -obj-$(CONFIG_IMA) += ima_arch.o +obj-$(CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT) += ima_arch.o obj-$(CONFIG_PERF_EVENTS) += perf_event.o perf_cpum_cf_common.o obj-$(CONFIG_PERF_EVENTS) += perf_cpum_cf.o perf_cpum_sf.oarch/x86/Kconfig +1
-0@@ -230,6 +230,7 @@ config X86 select VIRT_TO_BUS select X86_FEATURE_NAMES if PROC_FS select PROC_PID_ARCH_STATUS if PROC_FS + select IMA_SECURE_AND_OR_TRUSTED_BOOT if EFI && IMA_ARCH_POLICY config INSTRUCTION_DECODER def_bool yarch/x86/kernel/Makefile +1
-1@@ -155,5 +155,5 @@ ifeq ($(CONFIG_X86_64),y) endif ifdef CONFIG_EFI -obj-$(CONFIG_IMA) += ima_arch.o +obj-$(CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT) += ima_arch.o endifinclude/linux/ima.h +1
-2@@ -30,8 +30,7 @@ extern void ima_kexec_cmdline(const void *buf, int size);extern void ima_add_kexec_buffer (struct kimage *image);#endif -#if (defined(CONFIG_X86 ) && defined(CONFIG_EFI )) || defined(CONFIG_S390 ) \ - || defined(CONFIG_PPC_SECURE_BOOT ) +#ifdef CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT extern bool arch_ima_get_secureboot (void );extern const char *const *arch_get_ima_policy (void );#else security/integrity/ima/Kconfig +8
-0@@ -327,3 +327,11 @@ config IMA_QUEUE_EARLY_BOOT_KEYS depends on IMA_MEASURE_ASYMMETRIC_KEYS depends on SYSTEM_TRUSTED_KEYRING default y + +config IMA_SECURE_AND_OR_TRUSTED_BOOT + bool + depends on IMA_ARCH_POLICY + default n + help + This option is selected by architectures to enable secure and/or + trusted boot based on IMA runtime policies.