FAILED: patch "[PATCH] mmc: sdhci-tegra: Fix busy detection by enabling" failed to apply to 5.5-stable tree

The patch below does not apply to the 5.5-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From d2f8bfa4bff5028bc40ed56b4497c32e05b0178f Mon Sep 17 00:00:00 2001
From: Ulf Hansson <[email protected]>
Date: Tue, 10 Mar 2020 15:50:11 +0100
Subject: [PATCH] mmc: sdhci-tegra: Fix busy detection by enabling
MMC_CAP_NEED_RSP_BUSY

It has turned out that the sdhci-tegra controller requires the R1B response, for commands that has this response associated with them. So, converting from an R1B to an R1 response for a CMD6 for example, leads to problems with the HW busy detection support.

Fix this by informing the mmc core about the requirement, via setting the host cap, MMC_CAP_NEED_RSP_BUSY.

index 403ac44a7378..a25c3a4d3f6c 100644
@@ -1552,6 +1552,9 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
 	if (tegra_host->soc_data->nvquirks & NVQUIRK_ENABLE_DDR50)
 		host->mmc->caps |= MMC_CAP_1_8V_DDR;
 
+	/* R1B responses is required to properly manage HW busy detection. */
+	host->mmc->caps |= MMC_CAP_NEED_RSP_BUSY;
+
 	tegra_sdhci_parse_dt(host);
 
 	tegra_host->power_gpio = devm_gpiod_get_optional(&pdev->dev, "power",