This series of patches add support for the Cortina Access
Subsystems (2)
cover This series of patches add support for the Cortina Access
RAW NAND controller found in CAxxxx SoCs. Additionally, initial support is integrated into into the Cortina Access Presidio Engineering Board.
Alex Nemirovsky (1):
board: presidio-asic: Add RAW Parallel NAND support
Jason Li (1):
mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller
support
MAINTAINERS | 4 + configs/cortina_presidio-asic-bch16_defconfig | 35 + configs/cortina_presidio-asic-bch24_defconfig | 36 + configs/cortina_presidio-asic-bch40_defconfig | 36 + configs/cortina_presidio-asic-bch8_defconfig | 36 + drivers/mtd/nand/raw/Kconfig | 30 + drivers/mtd/nand/raw/Makefile | 1 + drivers/mtd/nand/raw/ca_nand.c | 4914 +++++++++++++++++++++++++ drivers/mtd/nand/raw/ca_nand.h | 3899 ++++++++++++++++++++ include/configs/presidio_asic.h | 15 + 10 files changed, 9006 insertions(+) create mode 100644 configs/cortina_presidio-asic-bch16_defconfig create mode 100644 configs/cortina_presidio-asic-bch24_defconfig create mode 100644 configs/cortina_presidio-asic-bch40_defconfig create mode 100644 configs/cortina_presidio-asic-bch8_defconfig create mode 100644 drivers/mtd/nand/raw/ca_nand.c create mode 100644 drivers/mtd/nand/raw/ca_nand.h
Signature · 1 line
2.7.4
PATCH 1/2 mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support
From: Jason Li <[email protected]>
Supports all CAxxxx SoCs which support a parallel nand controller. It should be noted that some CAxxxx Soc also support an separate SPI serial NAND controller.
This driver only supports the parallel NAND controller. A different driver supports the SPI NAND interface controller.
---
MAINTAINERS | 4 + drivers/mtd/nand/raw/Kconfig | 30 + drivers/mtd/nand/raw/Makefile | 1 + drivers/mtd/nand/raw/ca_nand.c | 4914 ++++++++++++++++++++++++++++++++++++++++ drivers/mtd/nand/raw/ca_nand.h | 3899 +++++++++++++++++++++++++++++++ 5 files changed, 8848 insertions(+) create mode 100644 drivers/mtd/nand/raw/ca_nand.c create mode 100644 drivers/mtd/nand/raw/ca_nand.h
MAINTAINERS +4 -0
@@ -180,6 +180,8 @@ F: board/cortina/common/ F: drivers/gpio/cortina_gpio.c F: drivers/watchdog/cortina_wdt.c F: drivers/serial/serial_cortina.c +F: drivers/mtd/nand/raw/ca_nand.c +F: drivers/mtd/nand/raw/ca_nand.h ARM/CZ.NIC TURRIS MOX SUPPORT M: Marek Behun <[email protected]>
@@ -670,6 +672,8 @@ F: board/cortina/common/ F: drivers/gpio/cortina_gpio.c F: drivers/watchdog/cortina_wdt.c F: drivers/serial/serial_cortina.c +F: drivers/mtd/nand/raw/ca_nand.c +F: drivers/mtd/nand/raw/ca_nand.h MIPS MSCC M: Gregory CLEMENT <[email protected]>
drivers/mtd/nand/raw/Kconfig +30 -0
@@ -102,6 +102,36 @@ config NAND_BRCMNAND_63158 help Enable support for broadcom nand driver on bcm63158. +config NAND_CORTINA + tristate "Support Cortina-Access Parallel NAND cntlr." + select SYS_NAND_SELF_INIT + help + This enables the driver for the Cortina-Access Soc + +config NAND_CORTINA_ECC_LEVEL + int "Cortina-Access Parallel Nand driver HW ECC algorithm" + default 3 + range 0 5 + depends on NAND_CORTINA + help + NAND Flash ECC algorithm. Value range from 0 to 5. + The default value is 3. + + 0: Hamming algorithm. Correct 3 bad bits in 256 btyes. + 1: Hamming algorithm. Correct 3 bad bits in 512 btyes. + 2: BCH algorithm. Correct 8 bad bits in 1K btyes. + 3: BCH algorithm. Correct 16 bad bits in 1K btyes. + 4: BCH algorithm. Correct 24 bad bits in 1K btyes. + 5: BCH algorithm. Correct 40 bad bits in 1K btyes. + +config NAND_CORTINA_ECC_HW_BCH + bool + default y + depends on NAND_CORTINA_ECC_LEVEL=2 \ + || NAND_CORTINA_ECC_LEVEL=3 \ + || NAND_CORTINA_ECC_LEVEL=4 \ + || NAND_CORTINA_ECC_LEVEL=5 + config NAND_DAVINCI bool "Support TI Davinci NAND controller" help
drivers/mtd/nand/raw/Makefile +1 -0
@@ -42,6 +42,7 @@ obj-$(CONFIG_NAND_ECC_BCH) += nand_bch.o obj-$(CONFIG_NAND_ATMEL) += atmel_nand.o obj-$(CONFIG_NAND_ARASAN) += arasan_nfc.o obj-$(CONFIG_NAND_BRCMNAND) += brcmnand/ +obj-$(CONFIG_NAND_CORTINA) += ca_nand.o obj-$(CONFIG_NAND_DAVINCI) += davinci_nand.o obj-$(CONFIG_NAND_DENALI) += denali.o obj-$(CONFIG_NAND_DENALI_DT) += denali_dt.o
drivers/mtd/nand/raw/ca_nand.c new file +4914 -0
2,941 lines not on this page · raw message
drivers/mtd/nand/raw/ca_nand.h new file +3899 -0
3,899 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.7.4
Part of the diff is not shown here. View the raw message.
PATCH 2/2 board: presidio-asic: Add RAW Parallel NAND support
In reply to Alex NemirovskyAdd Parallel NAND CAxxxx support to Cortina Access Presidio Engineering Board support
---
configs/cortina_presidio-asic-bch16_defconfig | 35 ++++++++++++++++++++++++++ configs/cortina_presidio-asic-bch24_defconfig | 36 +++++++++++++++++++++++++++ configs/cortina_presidio-asic-bch40_defconfig | 36 +++++++++++++++++++++++++++ configs/cortina_presidio-asic-bch8_defconfig | 36 +++++++++++++++++++++++++++ include/configs/presidio_asic.h | 15 +++++++++++ 5 files changed, 158 insertions(+) create mode 100644 configs/cortina_presidio-asic-bch16_defconfig create mode 100644 configs/cortina_presidio-asic-bch24_defconfig create mode 100644 configs/cortina_presidio-asic-bch40_defconfig create mode 100644 configs/cortina_presidio-asic-bch8_defconfig
configs/cortina_presidio-asic-bch16_defconfig new file +35 -0
@@ -0,0 +1,35 @@ +CONFIG_ARM=y +# CONFIG_SYS_ARCH_TIMER is not set +CONFIG_TARGET_PRESIDIO_ASIC=y +CONFIG_SYS_TEXT_BASE=0x04000000 +CONFIG_ENV_SIZE=0x20000 +CONFIG_ENV_OFFSET=0x400000 +CONFIG_DM_GPIO=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_IDENT_STRING="Presidio-SoC" +CONFIG_SHOW_BOOT_PROGRESS=y +CONFIG_BOOTDELAY=3 +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SYS_PROMPT="G3#" +CONFIG_CMD_NAND=y +CONFIG_CMD_WDT=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_SMC=y +CONFIG_CMD_MTDPARTS=y +CONFIG_CMD_UBI=y +CONFIG_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" +CONFIG_ENV_IS_IN_NAND=y +# CONFIG_NET is not set +CONFIG_DM=y +CONFIG_CORTINA_GPIO=y +# CONFIG_MMC is not set +CONFIG_MTD=y +CONFIG_MTD_RAW_NAND=y +CONFIG_NAND_CORTINA=y +CONFIG_DM_SERIAL=y +CONFIG_CORTINA_UART=y +CONFIG_WDT=y +CONFIG_WDT_CORTINA=y
configs/cortina_presidio-asic-bch24_defconfig new file +36 -0
@@ -0,0 +1,36 @@ +CONFIG_ARM=y +# CONFIG_SYS_ARCH_TIMER is not set +CONFIG_TARGET_PRESIDIO_ASIC=y +CONFIG_SYS_TEXT_BASE=0x04000000 +CONFIG_ENV_SIZE=0x20000 +CONFIG_ENV_OFFSET=0x400000 +CONFIG_DM_GPIO=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_IDENT_STRING="Presidio-SoC" +CONFIG_SHOW_BOOT_PROGRESS=y +CONFIG_BOOTDELAY=3 +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SYS_PROMPT="G3#" +CONFIG_CMD_NAND=y +CONFIG_CMD_WDT=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_SMC=y +CONFIG_CMD_MTDPARTS=y +CONFIG_CMD_UBI=y +CONFIG_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" +CONFIG_ENV_IS_IN_NAND=y +# CONFIG_NET is not set +CONFIG_DM=y +CONFIG_CORTINA_GPIO=y +# CONFIG_MMC is not set +CONFIG_MTD=y +CONFIG_MTD_RAW_NAND=y +CONFIG_NAND_CORTINA=y +CONFIG_NAND_CORTINA_ECC_LEVEL=4 +CONFIG_DM_SERIAL=y +CONFIG_CORTINA_UART=y +CONFIG_WDT=y +CONFIG_WDT_CORTINA=y
configs/cortina_presidio-asic-bch40_defconfig new file +36 -0
@@ -0,0 +1,36 @@ +CONFIG_ARM=y +# CONFIG_SYS_ARCH_TIMER is not set +CONFIG_TARGET_PRESIDIO_ASIC=y +CONFIG_SYS_TEXT_BASE=0x04000000 +CONFIG_ENV_SIZE=0x20000 +CONFIG_ENV_OFFSET=0x400000 +CONFIG_DM_GPIO=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_IDENT_STRING="Presidio-SoC" +CONFIG_SHOW_BOOT_PROGRESS=y +CONFIG_BOOTDELAY=3 +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SYS_PROMPT="G3#" +CONFIG_CMD_NAND=y +CONFIG_CMD_WDT=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_SMC=y +CONFIG_CMD_MTDPARTS=y +CONFIG_CMD_UBI=y +CONFIG_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" +CONFIG_ENV_IS_IN_NAND=y +# CONFIG_NET is not set +CONFIG_DM=y +CONFIG_CORTINA_GPIO=y +# CONFIG_MMC is not set +CONFIG_MTD=y +CONFIG_MTD_RAW_NAND=y +CONFIG_NAND_CORTINA=y +CONFIG_NAND_CORTINA_ECC_LEVEL=5 +CONFIG_DM_SERIAL=y +CONFIG_CORTINA_UART=y +CONFIG_WDT=y +CONFIG_WDT_CORTINA=y
configs/cortina_presidio-asic-bch8_defconfig new file +36 -0
@@ -0,0 +1,36 @@ +CONFIG_ARM=y +# CONFIG_SYS_ARCH_TIMER is not set +CONFIG_TARGET_PRESIDIO_ASIC=y +CONFIG_SYS_TEXT_BASE=0x04000000 +CONFIG_ENV_SIZE=0x20000 +CONFIG_ENV_OFFSET=0x400000 +CONFIG_DM_GPIO=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_IDENT_STRING="Presidio-SoC" +CONFIG_SHOW_BOOT_PROGRESS=y +CONFIG_BOOTDELAY=3 +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SYS_PROMPT="G3#" +CONFIG_CMD_NAND=y +CONFIG_CMD_WDT=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_SMC=y +CONFIG_CMD_MTDPARTS=y +CONFIG_CMD_UBI=y +CONFIG_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" +CONFIG_ENV_IS_IN_NAND=y +# CONFIG_NET is not set +CONFIG_DM=y +CONFIG_CORTINA_GPIO=y +# CONFIG_MMC is not set +CONFIG_MTD=y +CONFIG_MTD_RAW_NAND=y +CONFIG_NAND_CORTINA=y +CONFIG_NAND_CORTINA_ECC_LEVEL=2 +CONFIG_DM_SERIAL=y +CONFIG_CORTINA_UART=y +CONFIG_WDT=y +CONFIG_WDT_CORTINA=y
include/configs/presidio_asic.h +15 -0
@@ -36,6 +36,8 @@#define CONFIG_SYS_TIMER_BASE 0xf4321000 +#define GLOBAL_SOFTWARE2 0xf43200c4 +/* Use external clock source */ #define PRESIDIO_APB_CLK 125000000#define CORTINA_PER_IO_FREQ PRESIDIO_APB_CLK
@@ -72,4 +74,17 @@#define CONFIG_SYS_MAXARGS 64#define CONFIG_EXTRA_ENV_SETTINGS "silent=y\0" +/* Macros for Flash */ +#define CORTINA_FLASH_CTRL_BASE 0xf4324000 +#define CORTINA_DMA_GLB_BASE 0xf7001000 +#define CORTINA_DMA_SSP_BASE 0xf7001a00 +#define CONFIG_SYS_FLASH_BASE 0xe0000000 + +#ifdef CONFIG_NAND_CORTINA +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_MAX_CHIPS 1 +#define CONFIG_SYS_NAND_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#endif +#endif /* __PRESIDIO_ASIC_H */
Signature · 1 line
2.7.4