Two routing cache entries with different interface
Witaj Julian,
W Twoim liœcie datowanym 10 stycznia 2004 (11:41:34) mo¿na przeczytaæ:
JA> Hello,
Quoted 9 lines · Tushar Thakker
Quoted 9 lines
hi all,
i am setting up a load balancing netwrok with failover, i have applied julian patch,
but whenever i try to traceroute from any client node, it gives me two entries for that destination, but i get different interface for that entries,
so it doesn't forward my requests,
i have done masquerading for client nodes,
Quoted 8 lines
Quoted 8 lines
the ip rule/route are as follows,
ip rule add prio 222 table 222
ip route add default table 222 proto static \
nexthop via $GWE1 dev $IFE1 weight 1\
nexthop via $GWE2 dev $IFE2 weight 1Now after traceroute failure, if i see the routing cache for that ip, it shows following,
JA> output route, probably created from -j MASQUERADE?:
Quoted 2 lines
Quoted 2 lines
205.158.62.141 via 203.88.135.213 dev eth1 src 203.88.135.212
cache mtu 1500 advmss 1460
JA> input route:
Quoted 4 lines
Quoted 4 lines
205.158.62.141 from 192.168.1.51 via 203.88.135.205 dev eth2 src 192.168.1.242
cache <src-direct> mtu 1500 advmss 1460 iif eth0please see eth1 and eth2 in both entries,
JA> Nothing strange so far, may be they are created from different
JA> connections. In fact, there should be more cache entries.
Quoted 1 line
Quoted 1 line
now it does not forward this request,
JA> Can you provide more information, in private mail if you
JA> prefer so, including:
JA> - tcpdump output(s) for all interfaces during the traceroute JA> - topology: are eth1 and eth2 connected to same hub? JA> - ip rules and routes
JA> I hope you really have the "routes" patch applied and
JA> running.
Quoted 7 lines
Quoted 7 lines
what can be the reason behind this and please can anyone suggest me the solution, thanx in advance,
Regards,----------------------------------------------------------------
Tushar Thakker
Elitecore Technologies Ltd.
JA> Regards
JA> --
JA> Julian Anastasov <[email protected]>
JA> _______________________________________________
JA> LARTC mailing list / [email protected]
JA> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
try this, after applying routes patch it works fine (for me it works when I upgraded it to 3 uplinks):
---------------------------cut here------------------------------------------
#!/bin/bash
# This script is done by : Robert Kurjata Sep, 2003.
# feel free to use it in any usefull way
# CONFIGURATION
IP=/sbin/ip
PING=/bin/ping
#--------------- LINK PART -----------------
# EXTIFn - interface name
# EXTIPn - outgoing IP
# EXTMn - netmask length (bits)
# EXTGWn - outgoing gateway
#-------------------------------------------
# LINK 1
EXTIF1=eth2
EXTIP1EXTM1EXTGW1
# LINK 2
EXTIF2=eth1
EXTIP2EXTM2EXTGW2
#ROUTING PART
# removing old rules and routes
echo "removing old rules"
${IP} rule del prio 50 table main
${IP} rule del prio 201 from ${EXTIP1}/${EXTM1} table 201 ${IP} rule del prio 202 from ${EXTIP2}/${EXTM2} table 202 ${IP} rule del prio 221 table 221
echo "flushing tables"
${IP} route flush table 201
${IP} route flush table 202
${IP} route flush table 221
echo "removing tables"
${IP} route del table 201
${IP} route del table 202
${IP} route del table 221
# setting new rules echo "Setting new routing rules"
# main table w/o default gateway here
${IP} rule add prio 50 table main
${IP} route del default table main# identified routes here
${IP} rule add prio 201 from ${EXTIP1}/${EXTM1} table 201
${IP} rule add prio 202 from ${EXTIP2}/${EXTM2} table 202${IP} route add default via ${EXTGW1} dev ${EXTIF1} src ${EXTIP1} proto static table 201 ${IP} route append prohibit default table 201 metric 1 proto static
${IP} route add default via ${EXTGW2} dev ${EXTIF2} src ${EXTIP2} proto static table 202 ${IP} route append prohibit default table 202 metric 1 proto static
# mutipath
${IP} rule add prio 221 table 221${IP} route add default table 221 proto static \
nexthop via ${EXTGW1} dev ${EXTIF1} weight 2\
nexthop via ${EXTGW2} dev ${EXTIF2} weight 3${IP} route flush cache
while : ; do
${PING} -c 1 ${EXTGW1}
${PING} -c 1 ${EXTGW2}
sleep 60
done
---------------------------cut here------------------------------------------
Signature · 6 lines
Pozdrowienia, Robert _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/