media: doc-rst: add yavta test example in ipu3 docs
Subsystems (4)
PATCH 1/1 media: doc-rst: add yavta test example in ipu3 docs
This patch add yavta test command in ipu3.rst as an example on how to run simple ImgU test using yavta.
Signed-off-by Bingbu Cao <[email protected]>
--- Documentation/media/v4l-drivers/ipu3.rst | 13 +++++++++++++ drivers/staging/media/ipu3/TODO | 2 -- 2 files changed, 13 insertions(+), 2 deletions(-)
Documentation/media/v4l-drivers/ipu3.rst +13 -0
@@ -363,6 +363,19 @@ v4l2n --pipe=4 --load=/tmp/frame-#.bin --open=/dev/video4 --output=/tmp/frames.3A --fmt=type:META_CAPTURE,? --reqbufs=count:1,type:META_CAPTURE --pipe=1,2,3,4 --stream=5 +You can also use yavta [#f2]_ command to do same thing as above: + +.. code-block:: none + + yavta --data-prefix -Bcapture-mplane -c10 -n5 -I -s2592x1944 \ + --file=frame-#.out-f NV12 /dev/video5 & \ + yavta --data-prefix -Bcapture-mplane -c10 -n5 -I -s2592x1944 \ + --file=frame-#.vf -f NV12 /dev/video6 & \ + yavta --data-prefix -Bmeta-capture -c10 -n5 -I \ + --file=frame-#.3a /dev/video7 & \ + yavta --data-prefix -Boutput-mplane -c10 -n5 -I -s2592x1944 \ + --file=/tmp/frame-in.cio2 -f IPU3_SGRBG10 /dev/video4 + where /dev/video4, /dev/video5, /dev/video6 and /dev/video7 devices point to input, output, viewfinder and 3A statistics video nodes respectively.
drivers/staging/media/ipu3/TODO +0 -2
@@ -8,8 +8,6 @@ staging directory. - IPU3 driver documentation (Laurent) Comments on configuring v4l2 subdevs for CIO2 and ImgU. -- Switch to yavta from v4l2n in driver docs. - - Elaborate the functionality of different selection rectangles in driver documentation. This may require driver changes as well.
Signature · 1 line
2.7.4