Skip to contentSkip to conversation

powerpc/mpc8xxx failed to compile: operand out of range

U-Boot Jérôme Arzel 2 participants 6 messages May 23, 2013 – Jun 4, 2013 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Hi all,

I have an issue when I compile U-Boot for my target machine (P1022DS, 36-bit). Here is the error message:

release.S: Assembler messages:
release.S:154: Error: operand out of range (0xfffff144 is not between 0x00000000 and 0x0000ffff) release.S:286: Error: operand out of range (0xfffff144 is not between 0x00000000 and 0x0000ffff) release.S:311: Error: operand out of range (0xfffff140 is not between 0x00000000 and 0x0000ffff)

(release.S is located to arch/powerpc/cpu/mpc85xx/release.S)

And here is the code for the first error (line 150):

#define toreset(x) (x - __secondary_start_page + 0xfffff000)

        /* get our PIR to figure out our table entry */
        lis     r3,toreset(__spin_table_addr)@h
        ori     r3,r3,toreset(__spin_table_addr)@l

I don't really know why it doesn't work, but I think
that "ori" is inappropried, the immediate value must be a 16-bit value.

I use GCC 4.7.3, compiled in x86_64 for target powerpc-none-linux-gnuspe. My U-Boot come from the repository, but older versions fail too.

Thanks for your help,

J?r?me

#2 lore raw
Quoted 20 lines · J?r?me Arzel

Hi all,

I have an issue when I compile U-Boot for my target machine (P1022DS, 36-bit).
Here is the error message:

release.S: Assembler messages:
release.S:154: Error: operand out of range (0xfffff144 is not between 0x00000000 and 0x0000ffff)
release.S:286: Error: operand out of range (0xfffff144 is not between 0x00000000 and 0x0000ffff)
release.S:311: Error: operand out of range (0xfffff140 is not between 0x00000000 and 0x0000ffff)

(release.S is located to arch/powerpc/cpu/mpc85xx/release.S)

And here is the code for the first error (line 150):

#define toreset(x) (x - __secondary_start_page + 0xfffff000)

Quoted 7 lines
        /* get our PIR to figure out our table entry */
        lis     r3,toreset(__spin_table_addr)@h
        ori     r3,r3,toreset(__spin_table_addr)@l

I don't really know why it doesn't work, but I think that "ori" is inappropried, the immediate value must be a 16-bit value.

The @l means take the low 16 bits of the constant. Likewise, the @h in the lis takes the upper 16 bits.

Could you try to see what that instruction looks like after the preprocessor stage (i.e. use -E rather than -c in gcc)?

Quoted 3 lines

I use GCC 4.7.3, compiled in x86_64 for target powerpc-none-linux-gnuspe.
My U-Boot come from the repository, but older versions fail too.

It builds OK for me with GCC 4.7.2.

-Scott

#3 lore raw
Quoted 34 lines · Scott Wood
Quoted 24 lines · J?r?me Arzel

Hi all,

I have an issue when I compile U-Boot for my target machine (P1022DS,
36-bit).
Here is the error message:

release.S: Assembler messages:
release.S:154: Error: operand out of range (0xfffff144 is not between
0x00000000 and 0x0000ffff)
release.S:286: Error: operand out of range (0xfffff144 is not between
0x00000000 and 0x0000ffff)
release.S:311: Error: operand out of range (0xfffff140 is not between
0x00000000 and 0x0000ffff)

(release.S is located to arch/powerpc/cpu/mpc85xx/release.S)

And here is the code for the first error (line 150):

#define toreset(x) (x - __secondary_start_page + 0xfffff000)

Quoted 7 lines
        /* get our PIR to figure out our table entry */
        lis     r3,toreset(__spin_table_addr)@h
        ori     r3,r3,toreset(__spin_table_addr)@l

I don't really know why it doesn't work, but I think that "ori" is inappropried, the immediate value must be a 16-bit value.

Quoted 7 lines

The @l means take the low 16 bits of the constant. Likewise, the @h in
the lis takes the upper 16 bits.

Could you try to see what that instruction looks like after the preprocessor stage (i.e. use -E rather than -c in gcc)?

OK, I tried and unsurprisingly it's:

lis 3,(__spin_table_addr - __secondary_start_page + 0xfffff000)@h ori 3,3,(__spin_table_addr - __secondary_start_page + 0xfffff000)@l lwz 3,0(3)

If the @l takes the low 16 bits of (__spin_table_addr - __secondary_start_page + 0xfffff000), so the immediate value should not be 0xfffff144, but 0xf144. The error is maybe in GCC...

J?r?me

#4 lore raw
Quoted 51 lines · J?r?me Arzel
Quoted 34 lines · Scott Wood
Quoted 24 lines · J?r?me Arzel

Hi all,

I have an issue when I compile U-Boot for my target machine (P1022DS,
36-bit).
Here is the error message:

release.S: Assembler messages:
release.S:154: Error: operand out of range (0xfffff144 is not between
0x00000000 and 0x0000ffff)
release.S:286: Error: operand out of range (0xfffff144 is not between
0x00000000 and 0x0000ffff)
release.S:311: Error: operand out of range (0xfffff140 is not between
0x00000000 and 0x0000ffff)

(release.S is located to arch/powerpc/cpu/mpc85xx/release.S)

And here is the code for the first error (line 150):

#define toreset(x) (x - __secondary_start_page + 0xfffff000)

Quoted 7 lines
        /* get our PIR to figure out our table entry */
        lis     r3,toreset(__spin_table_addr)@h
        ori     r3,r3,toreset(__spin_table_addr)@l

I don't really know why it doesn't work, but I think that "ori" is inappropried, the immediate value must be a 16-bit value.

Quoted 8 lines

The @l means take the low 16 bits of the constant. Likewise, the @h
in
the lis takes the upper 16 bits.

Could you try to see what that instruction looks like after the preprocessor stage (i.e. use -E rather than -c in gcc)?

OK, I tried and unsurprisingly it's:

lis 3,(__spin_table_addr - __secondary_start_page + 0xfffff000)@h ori 3,3,(__spin_table_addr - __secondary_start_page + 0xfffff000)@l lwz 3,0(3)

Quoted 7 lines

If the @l takes the low 16 bits of (__spin_table_addr - __secondary_start_page + 0xfffff000), so the immediate value should not be 0xfffff144, but 0xf144. The error is maybe in GCC...

J?r?me

In fact my tests was in a virtual machine.
I restarted the compilation of GCC from scratch, directly on my machine (x86_64) and the result is slightly different, but almost the same:

powerpc-e500v2-linux-gnuspe-gcc -D__ASSEMBLY__ -g -Os \
-fpic -mrelocatable -ffunction-sections -fdata-sections \
-meabi -D__KERNEL__ -DCONFIG_SYS_TEXT_BASE=0x11000000 \
-I/home/arzel/u-boot/u-boot-git/P1022DS_SDCARD/include2 \
-I/home/arzel/u-boot/u-boot-git/P1022DS_SDCARD/include \
-I/home/arzel/u-boot/u-boot-git/include -fno-builtin \
-ffreestanding -nostdinc \
-isystem /home/arzel/cross_compile/tools/lib/gcc/powerpc-
e500v2-linux-gnuspe/4.8.0/include \
-pipe -DCONFIG_PPC -D__powerpc__ -ffixed-r2 -Wa,-me500 \
-msoft-float -mno-string -mspe=yes -mno-spe \
-o /home/arzel/u-boot/u-boot-git/P1022DS_SDCARD/
arch/powerpc/cpu/mpc85xx/release.o release.S -c

release.S: Assembler messages:
release.S:153: Error: value of 4294963524 too large for field of 2 bytes at 170
release.S:154: Error: operand out of range (0xfffffffffffff144 is not between 0x0000000000000000 and 0x000000000000ffff) release.S:154: Error: value of 4294963524 too large for field of 2 bytes at 174
release.S:282: Error: value of 4294963524 too large for field of 2 bytes at 206
release.S:283: Error: operand out of range (0xfffffffffffff144 is not between 0x0000000000000000 and 0x000000000000ffff) release.S:283: Error: value of 4294963524 too large for field of 2 bytes at 210
release.S:307: Error: value of 4294963520 too large for field of 2 bytes at 278
release.S:308: Error: operand out of range (0xfffffffffffff140 is not between 0x0000000000000000 and 0x000000000000ffff) release.S:308: Error: value of 4294963520 too large for field of 2 bytes at 282

By curiosity, I tried to replace "toreset(__spin_table_addr)" by "0xfffffffffffff144" and it works... but it's not a solution.

I use the last version of U-Boot from the git branch 'master'.

Here is my configuration for GCC:

export PATH=/home/arzel/cross_compile/tools/bin:$PATH

Binutils (v2.23.2)

configure --target=powerpc-e500v2-linux-gnuspe \
--prefix=/home/arzel/cross_compile/tools \
--with-sysroot=/home/home/arzel/cross_compile/sysroot \
--disable-nls --disable-multilib

make all
make install

GCC (v4.8.0)

configure --target=powerpc-e500v2-linux-gnuspe \
--prefix=/home/arzel/cross_compile/tools \
--with-sysroot=/home/arzel/cross_compile/sysroot \
--without-headers --with-newlib --disable-shared \
--disable-threads --enable-languages=c \
--disable-decimal-float --disable-__cxa_atexit \
--disable-libquadmath --disable-libssp \
--disable-libgomp --disable-libmudflap \
--disable-nls --disable-multilib \
--enable-e500_double --with-long-double-128 \
--with-cpu=8548

make all-host all-target-libgcc
make install-host install-target-libgcc

Normally, I can build U-Boot with this small GCC.

J?r?me

#5 lore raw
In reply to Jérôme Arzel
Quoted 24 lines · J?r?me Arzel

Hi all,

I have an issue when I compile U-Boot for my target machine (P1022DS, 36-bit).
Here is the error message:

release.S: Assembler messages:
release.S:154: Error: operand out of range (0xfffff144 is not between 0x00000000 and 0x0000ffff)
release.S:286: Error: operand out of range (0xfffff144 is not between 0x00000000 and 0x0000ffff)
release.S:311: Error: operand out of range (0xfffff140 is not between 0x00000000 and 0x0000ffff)

(release.S is located to arch/powerpc/cpu/mpc85xx/release.S)

And here is the code for the first error (line 150):

#define toreset(x) (x - __secondary_start_page + 0xfffff000)

        /* get our PIR to figure out our table entry */
        lis     r3,toreset(__spin_table_addr)@h
        ori     r3,r3,toreset(__spin_table_addr)@l
Quoted 7 lines

I don't really know why it doesn't work, but I think that "ori" is inappropried, the immediate value must be a 16-bit value.

I use GCC 4.7.3, compiled in x86_64 for target powerpc-none-linux-gnuspe.
My U-Boot come from the repository, but older versions fail too.

This appears to be a binutils bug, introduced in 2.23.2. The attached test program gives a similar error on 2.23.2, but 2.23.1 is OK.

I've filed it here: http://sourceware.org/bugzilla/show_bug.cgi?id=15557

-Scott
-------------- next part --------------

	ori	3,3,(y-x+0x8000)@l

x:
y:

#6 lore raw

Binutils 2.23.1 and the patch(es) for 2.23.2 work well. Thank you for your help.

J?r?me

Quoted 46 lines · Scott Wood
Quoted 28 lines · J?r?me Arzel

Hi all,

I have an issue when I compile U-Boot for my target machine (P1022DS,
36-bit).
Here is the error message:

release.S: Assembler messages:
release.S:154: Error: operand out of range (0xfffff144 is not between
0x00000000 and 0x0000ffff)
release.S:286: Error: operand out of range (0xfffff144 is not between
0x00000000 and 0x0000ffff)
release.S:311: Error: operand out of range (0xfffff140 is not between
0x00000000 and 0x0000ffff)

(release.S is located to arch/powerpc/cpu/mpc85xx/release.S)

And here is the code for the first error (line 150):

#define toreset(x) (x - __secondary_start_page + 0xfffff000)

        /* get our PIR to figure out our table entry */
        lis     r3,toreset(__spin_table_addr)@h
        ori     r3,r3,toreset(__spin_table_addr)@l
Quoted 7 lines

I don't really know why it doesn't work, but I think that "ori" is inappropried, the immediate value must be a 16-bit value.

I use GCC 4.7.3, compiled in x86_64 for target powerpc-none-linux-gnuspe.
My U-Boot come from the repository, but older versions fail too.

This appears to be a binutils bug, introduced in 2.23.2. The attached
test program gives a similar error on 2.23.2, but 2.23.1 is OK.

I've filed it here:
http://sourceware.org/bugzilla/show_bug.cgi?id=15557

-Scott