pinctrl: msm: Add check for pinctrl group is valid
Subsystems (5)
PATCH 1/1 pinctrl: msm: Add check for pinctrl group is valid
The list of reserved gpio pins for platform are populated in gpiochip valid_mask.
Here on MSM common driver introduce ability to check if pingroup is valid, by parsing pins in pingroup against reserved pins for gpios. This does not handle non-gpio pingroups.
--- drivers/pinctrl/qcom/pinctrl-msm.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
drivers/pinctrl/qcom/pinctrl-msm.c +26 -0
@@ -261,6 +261,24 @@ static unsigned msm_regval_to_drive(u32 val)return (val +1 ) *2 ; } +static bool msm_pingroup_is_valid (struct msm_pinctrl *pctrl, +const struct msm_pingroup *g) +{ +const unsigned int *pins = g->pins; +unsigned int num_pins = g->npins; +struct gpio_chip *chip = &pctrl->chip; +unsigned int max_gpios = chip->ngpio; +unsigned int i; + +for (i =0 ; i < num_pins; i++) { +/* Doesn't handle non-gpio pingroups */ +if (pins[i] < max_gpios && + !gpiochip_line_is_valid (chip, pins[i])) +return false; + } +return true; +} +static int msm_config_group_get (struct pinctrl_dev *pctldev,unsigned int group,unsigned long *config)
@@ -276,6 +294,10 @@ static int msm_config_group_get(struct pinctrl_dev *pctldev, g = &pctrl->soc->groups[group]; +/* Check if group has all valid pins */ +if (!msm_pingroup_is_valid (pctrl, g)) +return -EINVAL ; + ret =msm_config_reg (pctrl, g, param, &mask, &bit);if (ret <0 )return ret;
@@ -355,6 +377,10 @@ static int msm_config_group_set(struct pinctrl_dev *pctldev, g = &pctrl->soc->groups[group]; +/* Check if group has all valid pins */ +if (!msm_pingroup_is_valid (pctrl, g)) +return -EINVAL ; +for (i =0 ; i < num_configs; i++) { param =pinconf_to_config_param (configs[i]); arg =pinconf_to_config_argument (configs[i]);
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation
Quoted 8 lines · Mayank Grover
The list of reserved gpio pins for platform are populated in gpiochip
valid_mask.Here on MSM common driver introduce ability to check if pingroup is valid, by parsing pins in pingroup against reserved pins for gpios. This does not handle non-gpio pingroups.
Thanks Mayank, I can confirm that this is a problem, but don't we need this on some of the pinmux_ops as well?
@Linus, we started off with something similar for GPIOs and ended up with the logic in the core code. Should we somehow try to do the same for pinctrl?
Regards,
Bjorn
Quoted 59 lines
Signed-off-by Mayank Grover <[email protected]>--- drivers/pinctrl/qcom/pinctrl-msm.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)drivers/pinctrl/qcom/pinctrl-msm.c +26
-0@@ -261,6 +261,24 @@ static unsigned msm_regval_to_drive(u32 val)return (val +1 ) *2 ; } +static bool msm_pingroup_is_valid (struct msm_pinctrl *pctrl, +const struct msm_pingroup *g) +{ +const unsigned int *pins = g->pins; +unsigned int num_pins = g->npins; +struct gpio_chip *chip = &pctrl->chip; +unsigned int max_gpios = chip->ngpio; +unsigned int i; + +for (i =0 ; i < num_pins; i++) { +/* Doesn't handle non-gpio pingroups */ +if (pins[i] < max_gpios && + !gpiochip_line_is_valid (chip, pins[i])) +return false; + } +return true; +} +static int msm_config_group_get (struct pinctrl_dev *pctldev,unsigned int group,unsigned long *config)@@ -276,6 +294,10 @@ static int msm_config_group_get(struct pinctrl_dev *pctldev, g = &pctrl->soc->groups[group]; +/* Check if group has all valid pins */ +if (!msm_pingroup_is_valid (pctrl, g)) +return -EINVAL ; + ret =msm_config_reg (pctrl, g, param, &mask, &bit);if (ret <0 )return ret;@@ -355,6 +377,10 @@ static int msm_config_group_set(struct pinctrl_dev *pctldev, g = &pctrl->soc->groups[group]; +/* Check if group has all valid pins */ +if (!msm_pingroup_is_valid (pctrl, g)) +return -EINVAL ; +for (i =0 ; i < num_configs; i++) { param =pinconf_to_config_param (configs[i]); arg =pinconf_to_config_argument (configs[i]);Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation
Quoted 5 lines · Bjorn Andersson
Quoted 3 lines · Mayank Grover
The list of reserved gpio pins for platform are populated in gpiochip
valid_mask.
Quoted 9 lines
Quoted 5 lines
Here on MSM common driver introduce ability to check if pingroup is valid, by parsing pins in pingroup against reserved pins for gpios. This does not handle non-gpio pingroups.
Thanks Mayank, I can confirm that this is a problem, but don't we need this on some of the
pinmux_opsas well?
Thanks Bjorn, for quick reply.
For pinmux ops, we already have check for validity in msm_pinmux_request function hook.
request is getting called by core to check availabity of pin before acquiring the pin.
Hence, I think we don't need this check there.
Regards,
Mayank
Quoted 66 lines
@Linus, we started off with something similar for GPIOs and ended up with the logic in the core code. Should we somehow try to do the same for pinctrl?
Regards,
BjornQuoted 59 lines
Signed-off-by Mayank Grover <[email protected]>--- drivers/pinctrl/qcom/pinctrl-msm.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)drivers/pinctrl/qcom/pinctrl-msm.c +26
-0@@ -261,6 +261,24 @@ static unsigned msm_regval_to_drive(u32 val)return (val +1 ) *2 ; } +static bool msm_pingroup_is_valid (struct msm_pinctrl *pctrl, +const struct msm_pingroup *g) +{ +const unsigned int *pins = g->pins; +unsigned int num_pins = g->npins; +struct gpio_chip *chip = &pctrl->chip; +unsigned int max_gpios = chip->ngpio; +unsigned int i; + +for (i =0 ; i < num_pins; i++) { +/* Doesn't handle non-gpio pingroups */ +if (pins[i] < max_gpios && + !gpiochip_line_is_valid (chip, pins[i])) +return false; + } +return true; +} +static int msm_config_group_get (struct pinctrl_dev *pctldev,unsigned int group,unsigned long *config)@@ -276,6 +294,10 @@ static int msm_config_group_get(struct pinctrl_dev *pctldev, g = &pctrl->soc->groups[group]; +/* Check if group has all valid pins */ +if (!msm_pingroup_is_valid (pctrl, g)) +return -EINVAL ; + ret =msm_config_reg (pctrl, g, param, &mask, &bit);if (ret <0 )return ret;@@ -355,6 +377,10 @@ static int msm_config_group_set(struct pinctrl_dev *pctldev, g = &pctrl->soc->groups[group]; +/* Check if group has all valid pins */ +if (!msm_pingroup_is_valid (pctrl, g)) +return -EINVAL ; +for (i =0 ; i < num_configs; i++) { param =pinconf_to_config_param (configs[i]); arg =pinconf_to_config_argument (configs[i]);Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation
Quoted 3 lines · Bjorn Andersson
@Linus, we started off with something similar for GPIOs and ended up with the logic in the core code. Should we somehow try to do the same for pinctrl?
msm_pingroup_is_valid() looks very reusable but I'm afraid I do not understand the implicit assumptions around it, but I guess yes, if it can be properly documented etc.
Yours,
Linus Walleij
Quoted 7 lines · Linus Walleij
Quoted 3 lines · Bjorn Andersson
@Linus, we started off with something similar for GPIOs and ended up with the logic in the core code. Should we somehow try to do the same for pinctrl?
Quoted 6 lines
msm_pingroup_is_valid()looks very reusable but I'm afraid I do not understand the implicit assumptions around it, but I guess yes, if it can be properly documented etc.Yours,
Linus Walleij
Hi Bjorn,
Can you please help guide further on this ?
we can validate group using request calls similar to pinmux_ops here.
-Mayank