ASoC: SOF: Intel: hda: unsolicited RIRB response
Subsystems (3)
PATCH 1/1 ASoC: SOF: Intel: hda: unsolicited RIRB response
The loop implementation could not solve the unsolicited response issue because the RIRBSTS is cleared after leaving the snd_hdac_bus_update_rirb() function. So the next loop will fail the status test against the RIRB_INT_MASK and skip all the RIRB handling stuff. On the other hand, there alwasy could be unsolicited responses in the last loop regardless the number of loops.
Clear the RIRB interrupt before handling it so unsolicited response could trigger another RIRB interrupt to handle it later.
--- sound/soc/sof/intel/hda-stream.c | 48 +++++++++++++++++----------------------- 1 file changed, 20 insertions(+), 28 deletions(-)
sound/soc/sof/intel/hda-stream.c +20 -28
@@ -589,11 +589,10 @@ hda_dsp_set_bytes_transferred(struct hdac_stream *hstream, u64 buffer_size) hstream->curr_pos += num_bytes; } -static bool hda_dsp_stream_check (struct hdac_bus *bus,u32 status) +static void hda_dsp_stream_check (struct hdac_bus *bus,u32 status) {struct sof_intel_hda_dev *sof_hda =bus_to_sof_hda (bus);struct hdac_stream *s; -bool active = false;u32 sd_status;list_for_each_entry (s, &bus->stream_list, list) {
@@ -605,7 +604,6 @@ static bool hda_dsp_stream_check(struct hdac_bus *bus, u32 status)snd_hdac_stream_writeb (s,SD_STS , sd_status); - active = true;if ((!s->substream && !s->cstream) || !s->running || (sd_status &SOF_HDA_CL_DMA_SD_INT_COMPLETE ) ==0 )
@@ -621,8 +619,6 @@ static bool hda_dsp_stream_check(struct hdac_bus *bus, u32 status) } } } - -return active; }irqreturn_t hda_dsp_stream_threaded_handler (int irq,void *context)
@@ -632,37 +628,33 @@ irqreturn_t hda_dsp_stream_threaded_handler(int irq, void *context)#if IS_ENABLED (CONFIG_SND_SOC_SOF_HDA )u32 rirb_status;#endif -bool active;u32 status; -int i; -/* -* Loop 10 times to handle missed interrupts caused by -* unsolicited responses from the codec -*/ -for (i =0 , active = true; i <10 && active; i++) { -spin_lock_irq (&bus->reg_lock); +spin_lock_irq (&bus->reg_lock); - status =snd_hdac_chip_readl (bus,INTSTS ); + status =snd_hdac_chip_readl (bus,INTSTS ); -/* check streams */ - active =hda_dsp_stream_check (bus, status); +/* check streams */ +hda_dsp_stream_check (bus, status); -/* check and clear RIRB interrupt */ +/* check and clear RIRB interrupt */ #if IS_ENABLED (CONFIG_SND_SOC_SOF_HDA ) -if (status &AZX_INT_CTRL_EN ) { - rirb_status =snd_hdac_chip_readb (bus,RIRBSTS ); -if (rirb_status &RIRB_INT_MASK ) { - active = true; -if (rirb_status &RIRB_INT_RESPONSE ) -snd_hdac_bus_update_rirb (bus); -snd_hdac_chip_writeb (bus,RIRBSTS , -RIRB_INT_MASK ); - } +if (status &AZX_INT_CTRL_EN ) { + rirb_status =snd_hdac_chip_readb (bus,RIRBSTS ); +if (rirb_status &RIRB_INT_MASK ) { +/* +* clear current interrupt before reading RIRBWP +* so unsolicited response could trigger another +* interrupt +*/ +snd_hdac_chip_writeb (bus,RIRBSTS ,RIRB_INT_MASK ); + +if (rirb_status &RIRB_INT_RESPONSE ) +snd_hdac_bus_update_rirb (bus); } -#endif -spin_unlock_irq (&bus->reg_lock); } +#endif +spin_unlock_irq (&bus->reg_lock);return IRQ_HANDLED ; }
Signature · 1 line
2.7.4
Quoted 9 lines · Brent Lu
The loop implementation could not solve the unsolicited response issue because the RIRBSTS is cleared after leaving the
snd_hdac_bus_update_rirb()function. So the next loop will fail the status test against theRIRB_INT_MASKand skip all the RIRB handling stuff. On the other hand, there alwasy could be unsolicited responses in the last loop regardless the number of loops.Clear the RIRB interrupt before handling it so unsolicited response could trigger another RIRB interrupt to handle it later.
Hi Brent,
Thanks for the patch. Is this fix for a specific issue you're seeing? If so, could you please give us some details about it?
Thanks,
Ranjani
Quoted 7 lines
Hi Brent,
Thanks for the patch. Is this fix for a specific issue you're seeing? If so, could you please give us some details about it?
Thanks,
Ranjani
Hi Ranjani,
It's reported to happen on GLK Chromebook 'Fleex' that sometimes it cannot output the audio stream to external display. The kernel is Chrome v4.14 branch. Following is the reproduce step provided by ODM but I could reproduce it simply running aplay or cras_test_client so I think it's not about the cable plug/unplug handling.
What steps will reproduce the problem?
1. Play YouTube video on Chromebook and connect it to external monitor with Type C to DP dongle 2. Press monitor power button to turn off the monitor 3. Press monitor power button again to turn on the monitor 4. Continue to play YouTube video and check audio playback 5. No sound comes out from built-in speaker of external monitor when turn on external monitor
I added debug messages to print the RIRBWP register and realize that response could come between the read of RIRBWP in the snd_hdac_bus_update_rirb() function and the interrupt clear in the hda_dsp_stream_interrupt() function. The response is not handled but the interrupt is already cleared. It will cause timeout unless more responses coming to RIRB.
[ 69.173507] sof-audio-pci 0000:00:0e.0: snd_hdac_bus_get_response: addr 0x2 [ 69.173567] sof-audio-pci 0000:00:0e.0: snd_hdac_bus_update_rirb: cmds 1 res 0 rp 21 wp 21 => handle the response in slot 21 [ 69.173570] sof-audio-pci 0000:00:0e.0: snd_hdac_bus_update_rirb: updated wp 22 => new response in slot 22 but not handled [ 70.174089] sof-audio-pci 0000:00:0e.0: snd_hdac_bus_get_response: timeout, wp 22 [ 70.174106] HDMI HDA Codec ehdaudio0D2: codec_read: fail to read codec
I found there is a commit addressing this issue and cherry-pick it to the Chrome v4.14 but the issue is still there. I think more loop does not help because eventually there will be response coming in the snd_hdac_bus_update_rirb() function and become unhandled response in the last loop.
commit 6297a0dc4c14a62bea5a9137ceef280cb7a80665
Author: Ranjani Sridharan <[email protected]> Date: Wed Jun 12 12:23:40 2019 -0500
ASoC: SOF: Intel: hda: modify stream interrupt handler
Modify the stream interrupt handler to always wake up the IRQ thread if the status register is valid. The IRQ thread performs the check for stream interrupts and RIRB interrupts in a loop to handle the case of missed interrupts when an unsolicited response from the codec is received just before the stream interrupt handler is completed.
Regards,
Brent
Quoted 24 lines · Brent
Quoted 8 lines
Hi Brent,
Thanks for the patch. Is this fix for a specific issue you're seeing? If so, could you please give us some details about it?
Thanks,
RanjaniHi Ranjani,
It's reported to happen on GLK Chromebook 'Fleex' that sometimes it cannot output the audio stream to external display. The kernel is Chrome v4.14 branch. Following is the reproduce step provided by ODM but I could reproduce it simply running aplay or
cras_test_clientso I think it's not about the cable plug/unplug handling.What steps will reproduce the problem?
1. Play YouTube video on Chromebook and connect it to external monitor with Type C to DP dongle 2. Press monitor power button to turn off the monitor 3. Press monitor power button again to turn on the monitor 4. Continue to play YouTube video and check audio playback 5. No sound comes out from built-in speaker of external monitor when turn on external monitor
Quoted 6 lines
I added debug messages to print the RIRBWP register and realize that response could come between the read of RIRBWP in the
snd_hdac_bus_update_rirb()function and the interrupt clear in thehda_dsp_stream_interrupt()function. The response is not handled but the interrupt is already cleared. It will cause timeout unless more responses coming to RIRB.
Now I noticed that the legacy driver already addressed it recently via commit 6d011d5057ff
ALSA: hda: Clear RIRB status before reading WP
We should have checked SOF at the same time, too...
thanks,
Takashi
Quoted 39 lines · Takashi Iwai
Quoted 28 lines · Brent
Quoted 9 lines
Hi Brent,
Thanks for the patch. Is this fix for a specific issue you're seeing?
If so, could you please give us some details about it?Thanks,
RanjaniHi Ranjani,
It's reported to happen on GLK Chromebook 'Fleex' that sometimes it cannot output the audio stream to external display. The kernel is Chrome v4.14 branch. Following is the reproduce step provided by ODM but I could reproduce it simply running aplay or
cras_test_client
so I think it's not about the cable plug/unplug handling.What steps will reproduce the problem?
1. Play YouTube video on Chromebook and connect it to external
monitor with Type C to DP dongle2. Press monitor power button to turn off the monitor 3. Press monitor power button again to turn on the monitor 4. Continue to play YouTube video and check audio playback 5. No sound comes out from built-in speaker of externalmonitor when turn on external monitor
Quoted 8 lines
I added debug messages to print the RIRBWP register and realize that
response could come between the read of RIRBWP in thesnd_hdac_bus_update_rirb()function and the interrupt clear in thehda_dsp_stream_interrupt()function. The response is not handled but
the interrupt is already cleared. It will cause timeout unless more responses coming to RIRB.
Quoted 6 lines
Now I noticed that the legacy driver already addressed it recently via
commit6d011d5057ff
ALSA: hda: Clear RIRB status before reading WPWe should have checked SOF at the same time, too...
Thanks, Takashi. But the legacy driver but doesnt remove the loop. The loop added in the SOF driver was based on the legacy driver and specifically to handle missed stream interrupts. Is there any harm in keeping the loop?
Thanks,
Ranjani
Quoted 46 lines · Ranjani Sridharan
Quoted 44 lines · Takashi Iwai
Quoted 28 lines · Brent
Quoted 9 lines
Hi Brent,
Thanks for the patch. Is this fix for a specific issue you're seeing?
If so, could you please give us some details about it?Thanks,
RanjaniHi Ranjani,
It's reported to happen on GLK Chromebook 'Fleex' that sometimes it cannot output the audio stream to external display. The kernel is Chrome v4.14 branch. Following is the reproduce step provided by ODM but I could reproduce it simply running aplay or
cras_test_client
so I think it's not about the cable plug/unplug handling.What steps will reproduce the problem?
1. Play YouTube video on Chromebook and connect it to external
monitor with Type C to DP dongle2. Press monitor power button to turn off the monitor 3. Press monitor power button again to turn on the monitor 4. Continue to play YouTube video and check audio playback 5. No sound comes out from built-in speaker of externalmonitor when turn on external monitor
Quoted 8 lines
I added debug messages to print the RIRBWP register and realize that
response could come between the read of RIRBWP in thesnd_hdac_bus_update_rirb()function and the interrupt clear in thehda_dsp_stream_interrupt()function. The response is not handled but
the interrupt is already cleared. It will cause timeout unless more responses coming to RIRB.Now I noticed that the legacy driver already addressed it recently via
commit6d011d5057ff
ALSA: hda: Clear RIRB status before reading WP
Quoted 6 lines
Quoted 1 line
We should have checked SOF at the same time, too...
Thanks, Takashi. But the legacy driver but doesnt remove the loop. The loop added in the SOF driver was based on the legacy driver and specifically to handle missed stream interrupts. Is there any harm in keeping the loop?
A loop there might be safer to keep, indeed. That's basically for a difference kind of race, and it can still happen theoretically.
Though, SOF is with the threaded interrupt, and it's interesting how the behavior differs. I can imagine that, if a thread irq is running while a new IRQ is re-triggered, the hard irq handler won't queue it again. But I might be wrong here, need some checks.
Takashi
Quoted 22 lines
Quoted 15 lines
Quoted 15 lines
Quoted 9 lines
I added debug messages to print the RIRBWP register and realize that
response could come between the read of RIRBWP in thesnd_hdac_bus_update_rirb()function and the interrupt clear in thehda_dsp_stream_interrupt()function. The response is not handled but
the interrupt is already cleared. It will cause timeout unless more responses coming to RIRB.Now I noticed that the legacy driver already addressed it recently via
commit6d011d5057ff
ALSA: hda: Clear RIRB status before reading WPQuoted 6 lines
Quoted 1 line
We should have checked SOF at the same time, too...
Thanks, Takashi. But the legacy driver but doesnt remove the loop. The loop added in the SOF driver was based on the legacy driver and specifically to handle missed stream interrupts. Is there any harm in keeping the loop?
Quoted 7 lines
A loop there might be safer to keep, indeed. That's basically for a difference kind of race, and it can still happen theoretically.
Though, SOF is with the threaded interrupt, and it's interesting how the behavior differs. I can imagine that, if a thread irq is running while a new IRQ is re-triggered, the hard irq handler won't queue it again. But I might be wrong here, need some checks.
IIRC we added this loop before merging all interrupt handling in one thread, somehow the MSI mode never worked reliably without this change, so maybe we don't need this loop any longer.
I'd really prefer it if we didn't tie the RIRB handing change to this loop change, removing the loop should only be done with *a lot of testing*.
Quoted 7 lines
IIRC we added this loop before merging all interrupt handling in one thread, somehow the MSI mode never worked reliably without this change, so maybe we don't need this loop any longer.
I'd really prefer it if we didn't tie the RIRB handing change to this loop change, removing the loop should only be done with *a lot of testing*.
The reason I removed the loop because I thought it's for the unsolicited response, apparently it's not. I'd like to port the commit 6d011d5057ff
ALSA: hda: Clear RIRB status before reading WP
to SOF driver and upload a version 2. Thanks.
Regards,
Brent
Quoted 11 lines
Now I noticed that the legacy driver already addressed it recently via commit
6d011d5057ff
ALSA: hda: Clear RIRB status before reading WPWe should have checked SOF at the same time, too...
thanks,
Takashi
Hi Takashi-san,
Yes you are correct. I tested Chrome v5.4 on a CML Chromebook 'hatch' and realize the SOF does no suffer from this issue because the 'sync write' feature is enabled in hda_init. Soon I can reproduce the issue after turning it off. So I think it's still worthy to have this fix in case we need to disable 'sync write' someday.
Regards,
Brent
Quoted 38 lines · Brent
Quoted 7 lines
Hi Brent,
Thanks for the patch. Is this fix for a specific issue you're seeing? If so, could you please give us some details about it?
Thanks,
RanjaniHi Ranjani,
It's reported to happen on GLK Chromebook 'Fleex' that sometimes it cannot output the audio stream to external display. The kernel is Chrome v4.14 branch. Following is the reproduce step provided by ODM but I could reproduce it simply running aplay or
cras_test_clientso I think it's not about the cable plug/unplug handling.What steps will reproduce the problem?
1. Play YouTube video on Chromebook and connect it to external monitor with Type C to DP dongle 2. Press monitor power button to turn off the monitor 3. Press monitor power button again to turn on the monitor 4. Continue to play YouTube video and check audio playback 5. No sound comes out from built-in speaker of external monitor when turn on external monitorI added debug messages to print the RIRBWP register and realize that response could come between the read of RIRBWP in the
snd_hdac_bus_update_rirb()function and the interrupt clear in thehda_dsp_stream_interrupt()function. The response is not handled but the interrupt is already cleared. It will cause timeout unless more responses coming to RIRB.[ 69.173507] sof-audio-pci 0000:00:0e.0: snd_hdac_bus_get_response: addr 0x2 [ 69.173567] sof-audio-pci 0000:00:0e.0: snd_hdac_bus_update_rirb: cmds 1 res 0 rp 21 wp 21 => handle the response in slot 21 [ 69.173570] sof-audio-pci 0000:00:0e.0: snd_hdac_bus_update_rirb: updated wp 22 => new response in slot 22 but not handled [ 70.174089] sof-audio-pci 0000:00:0e.0: snd_hdac_bus_get_response: timeout, wp 22 [ 70.174106] HDMI HDA Codec ehdaudio0D2: codec_read: fail to read codec
Quoted 5 lines
I found there is a commit addressing this issue and cherry-pick it to the Chrome v4.14 but the issue is still there. I think more loop does not help because eventually there will be response coming in the
snd_hdac_bus_update_rirb()function and become unhandled response in the last loop.
IIRC the loop was added because on some versions of the hardware we seem to miss stream interrupts - and I believe this was inspired by the same solution with the legacy HDaudio driver.
Maybe we need to do something better for unsolicited responses but I'd be surprised if we can remove this loop - this sounds like asking for trouble.
Quoted 18 lines
commit
6297a0dc4c14a62bea5a9137ceef280cb7a80665Author: Ranjani Sridharan <[email protected]> Date: Wed Jun 12 12:23:40 2019 -0500ASoC: SOF: Intel: hda: modify stream interrupt handler
Modify the stream interrupt handler to always wake up the IRQ thread if the status register is valid. The IRQ thread performs the check for stream interrupts and RIRB interrupts in a loop to handle the case of missed interrupts when an unsolicited response from the codec is received just before the stream interrupt handler is completed.
Regards,
Brent