ARM: dts: Aspeed: Rainier: Run NOR at 40MHz
PATCH 1/2 ARM: dts: Aspeed: Rainier: Run NOR at 40MHz
The BMC card for the Rainier system is designed to run the NOR chip at 40MHz.
Signed-off-by Eddie James <[email protected]>
--- arch/arm/dts/ast2600-rainier.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/dts/ast2600-rainier.dts +2 -2
@@ -75,7 +75,7 @@ // TODO: what compatible strings should be here? compatible = "spi-flash", "sst,w25q256"; status = "okay"; - spi-max-frequency = <50000000>; + spi-max-frequency = <40000000>; spi-tx-bus-width = <2>; spi-rx-bus-width = <2>; };
@@ -83,7 +83,7 @@ flash@1 { compatible = "spi-flash", "sst,w25q256"; status = "okay"; - spi-max-frequency = <50000000>; + spi-max-frequency = <40000000>; spi-tx-bus-width = <2>; spi-rx-bus-width = <2>; };
Signature · 1 line
1.8.3.1
PATCH 2/2 ARM: dts: Aspeed: Tacoma: Run NOR at 40MHz
The Tacoma card is designed to run the NOR chip at 40MHz.
Signed-off-by Eddie James <[email protected]>
--- arch/arm/dts/ast2600-tacoma.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/dts/ast2600-tacoma.dts +2 -2
@@ -66,7 +66,7 @@ // TODO: what compatible strings should be here? compatible = "spi-flash", "sst,w25q256"; status = "okay"; - spi-max-frequency = <50000000>; + spi-max-frequency = <40000000>; spi-tx-bus-width = <2>; spi-rx-bus-width = <2>; };
@@ -74,7 +74,7 @@ flash@1 { compatible = "spi-flash", "sst,w25q256"; status = "okay"; - spi-max-frequency = <50000000>; + spi-max-frequency = <40000000>; spi-tx-bus-width = <2>; spi-rx-bus-width = <2>; };
Signature · 1 line
1.8.3.1