Skip to contentSkip to conversation

DVFS support for dpu and dsi

PATCH Superseded Rajendra Nayak 2 participants 7 messages Jul 2, 2020 – Jul 7, 2020

Subsystems (6)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover DVFS support for dpu and dsi

Changes in v2
- Patch 2: Dropped dsi_link_clk_set_rate_6g_v2 and dsi_link_clk_disable_6g_v2 as suggested by Matthias

These patches add DVFS support for DPU and DSI.

These patches have no other dependency. Patch 1 and 2 will need to be merged in via the MSM DRM tree.

DT patches will need to land via the msm tree.

Rajendra Nayak (4):
drm/msm/dpu: Use OPP API to set clk/perf state drm/msm: dsi: Use OPP API to set clk/perf state
arm64: dts: sdm845: Add DSI and MDP OPP tables and power-domains
arm64: dts: sc7180: Add DSI and MDP OPP tables and power-domains

 arch/arm64/boot/dts/qcom/sc7180.dtsi          | 49 ++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sdm845.dtsi          | 59 +++++++++++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c |  3 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       | 26 +++++++++++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h       |  4 ++
 drivers/gpu/drm/msm/dsi/dsi_host.c            | 26 +++++++++++-
 6 files changed, 163 insertions(+), 4 deletions(-)
Signature · 7 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#1 lore raw

PATCH v2 1/4 drm/msm/dpu: Use OPP API to set clk/perf state

On some qualcomm platforms DPU needs to express a performance state requirement on a power domain depending on the clock rates. Use OPP table from DT to register with OPP framework and use dev_pm_opp_set_rate() to set the clk/perf state.

---
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c |  3 ++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       | 26 +++++++++++++++++++++++++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h       |  4 ++++
 3 files changed, 31 insertions(+), 2 deletions(-)
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c +2 -1
index 7c230f7..b36919d 100644
@@ -7,6 +7,7 @@
 #include <linux/debugfs.h>
 #include <linux/errno.h>
 #include <linux/mutex.h>
+#include <linux/pm_opp.h>
 #include <linux/sort.h>
 #include <linux/clk.h>
 #include <linux/bitmap.h>
@@ -218,7 +219,7 @@ static int _dpu_core_perf_set_core_clk_rate(struct dpu_kms *kms, u64 rate)
 		rate = core_clk->max_rate;
 
 	core_clk->rate = rate;
-	return msm_dss_clk_set_rate(core_clk, 1);
+	return dev_pm_opp_set_rate(&kms->pdev->dev, core_clk->rate);
 }
 
 static u64 _dpu_core_perf_get_core_clk_rate(struct dpu_kms *kms)
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +25 -1
index b8615d4..0bc8ec4 100644
@@ -10,6 +10,7 @@
 #include <linux/debugfs.h>
 #include <linux/dma-buf.h>
 #include <linux/of_irq.h>
+#include <linux/pm_opp.h>
 
 #include <drm/drm_crtc.h>
 #include <drm/drm_file.h>
@@ -1025,11 +1026,23 @@ static int dpu_bind(struct device *dev, struct device *master, void *data)
 	if (!dpu_kms)
 		return -ENOMEM;
 
+	dpu_kms->opp_table = dev_pm_opp_set_clkname(dev, "core");
+	if (IS_ERR(dpu_kms->opp_table))
+		return PTR_ERR(dpu_kms->opp_table);
+	/* OPP table is optional */
+	ret = dev_pm_opp_of_add_table(dev);
+	if (!ret) {
+		dpu_kms->has_opp_table = true;
+	} else if (ret != -ENODEV) {
+		dev_err(dev, "invalid OPP table in device tree\n");
+		return ret;
+	}
+
 	mp = &dpu_kms->mp;
 	ret = msm_dss_parse_clock(pdev, mp);
 	if (ret) {
 		DPU_ERROR("failed to parse clocks, ret=%d\n", ret);
-		return ret;
+		goto err;
 	}
 
 	platform_set_drvdata(pdev, dpu_kms);
@@ -1043,6 +1056,11 @@ static int dpu_bind(struct device *dev, struct device *master, void *data)
 
 	priv->kms = &dpu_kms->base;
 	return ret;
+err:
+	if (dpu_kms->has_opp_table)
+		dev_pm_opp_of_remove_table(dev);
+	dev_pm_opp_put_clkname(dpu_kms->opp_table);
+	return ret;
 }
 
 static void dpu_unbind(struct device *dev, struct device *master, void *data)
@@ -1057,6 +1075,10 @@ static void dpu_unbind(struct device *dev, struct device *master, void *data)
 
 	if (dpu_kms->rpm_enabled)
 		pm_runtime_disable(&pdev->dev);
+
+	if (dpu_kms->has_opp_table)
+		dev_pm_opp_of_remove_table(dev);
+	dev_pm_opp_put_clkname(dpu_kms->opp_table);
 }
 
 static const struct component_ops dpu_ops = {
@@ -1082,6 +1104,8 @@ static int __maybe_unused dpu_runtime_suspend(struct device *dev)
 	struct dpu_kms *dpu_kms = platform_get_drvdata(pdev);
 	struct dss_module_power *mp = &dpu_kms->mp;
 
+	/* Drop the performance state vote */
+	dev_pm_opp_set_rate(dev, 0);
 	rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, false);
 	if (rc)
 		DPU_ERROR("clock disable failed rc:%d\n", rc);
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h +4 -0
index a3b122b..7400cd7 100644
@@ -128,6 +128,10 @@ struct dpu_kms {
 
 	struct platform_device *pdev;
 	bool rpm_enabled;
+
+	struct opp_table *opp_table;
+	bool has_opp_table;
+
 	struct dss_module_power mp;
 
 	/* reference count bandwidth requests, so we know when we can
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
#2 lore raw

PATCH v2 2/4 drm/msm: dsi: Use OPP API to set clk/perf state

In reply to Rajendra Nayak

On SDM845 and SC7180 DSI needs to express a performance state requirement on a power domain depending on the clock rates. Use OPP table from DT to register with OPP framework and use dev_pm_opp_set_rate() to set the clk/perf state.

dev_pm_opp_set_rate() is designed to be equivalent to clk_set_rate() for devices without an OPP table, hence the change works fine on devices/platforms which only need to set a clock rate.

---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)
drivers/gpu/drm/msm/dsi/dsi_host.c +24 -2
index 11ae5b8..09e16b8 100644
@@ -14,6 +14,7 @@
 #include <linux/of_graph.h>
 #include <linux/of_irq.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/pm_opp.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/spinlock.h>
@@ -111,6 +112,9 @@ struct msm_dsi_host {
 	struct clk *pixel_clk_src;
 	struct clk *byte_intf_clk;
 
+	struct opp_table *opp_table;
+	bool has_opp_table;
+
 	u32 byte_clk_rate;
 	u32 pixel_clk_rate;
 	u32 esc_clk_rate;
@@ -512,9 +516,10 @@ int dsi_link_clk_set_rate_6g(struct msm_dsi_host *msm_host)
 	DBG("Set clk rates: pclk=%d, byteclk=%d",
 		msm_host->mode->clock, msm_host->byte_clk_rate);
 
-	ret = clk_set_rate(msm_host->byte_clk, msm_host->byte_clk_rate);
+	ret = dev_pm_opp_set_rate(&msm_host->pdev->dev,
+				  msm_host->byte_clk_rate);
 	if (ret) {
-		pr_err("%s: Failed to set rate byte clk, %d\n", __func__, ret);
+		pr_err("%s: dev_pm_opp_set_rate failed %d\n", __func__, ret);
 		return ret;
 	}
 
@@ -658,6 +663,8 @@ int dsi_link_clk_enable_v2(struct msm_dsi_host *msm_host)
 
 void dsi_link_clk_disable_6g(struct msm_dsi_host *msm_host)
 {
+	/* Drop the performance state vote */
+	dev_pm_opp_set_rate(&msm_host->pdev->dev, 0);
 	clk_disable_unprepare(msm_host->esc_clk);
 	clk_disable_unprepare(msm_host->pixel_clk);
 	if (msm_host->byte_intf_clk)
@@ -1879,6 +1886,18 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
 		goto fail;
 	}
 
+	msm_host->opp_table = dev_pm_opp_set_clkname(&pdev->dev, "byte");
+	if (IS_ERR(msm_host->opp_table))
+		return PTR_ERR(msm_host->opp_table);
+	/* OPP table is optional */
+	ret = dev_pm_opp_of_add_table(&pdev->dev);
+	if (!ret) {
+		msm_host->has_opp_table = true;
+	} else if (ret != -ENODEV) {
+		dev_err(&pdev->dev, "invalid OPP table in device tree\n");
+		return ret;
+	}
+
 	init_completion(&msm_host->dma_comp);
 	init_completion(&msm_host->video_comp);
 	mutex_init(&msm_host->dev_mutex);
@@ -1914,6 +1933,9 @@ void msm_dsi_host_destroy(struct mipi_dsi_host *host)
 	mutex_destroy(&msm_host->cmd_mutex);
 	mutex_destroy(&msm_host->dev_mutex);
 
+	if (msm_host->has_opp_table)
+		dev_pm_opp_of_remove_table(&msm_host->pdev->dev);
+	dev_pm_opp_put_clkname(msm_host->opp_table);
 	pm_runtime_disable(&msm_host->pdev->dev);
 }
 
Signature · 7 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#5 lore raw

PATCH v2 3/4 arm64: dts: sdm845: Add DSI and MDP OPP tables and power-domains

In reply to Rajendra Nayak

Add the OPP tables for DSI and MDP based on the perf state/clk requirements, and add the power-domains property to specify the scalable power domain.

---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 59 ++++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)
arch/arm64/boot/dts/qcom/sdm845.dtsi +59 -0
index 8eb5a31..b6afeb2 100644
@@ -3296,6 +3296,35 @@
 			#power-domain-cells = <1>;
 		};
 
+		dsi_opp_table: dsi-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-19200000 {
+				opp-hz = /bits/ 64 <19200000>;
+				required-opps = <&rpmhpd_opp_min_svs>;
+			};
+
+			opp-180000000 {
+				opp-hz = /bits/ 64 <180000000>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+			};
+
+			opp-275000000 {
+				opp-hz = /bits/ 64 <275000000>;
+				required-opps = <&rpmhpd_opp_svs>;
+			};
+
+			opp-328580000 {
+				opp-hz = /bits/ 64 <328580000>;
+				required-opps = <&rpmhpd_opp_svs_l1>;
+			};
+
+			opp-358000000 {
+				opp-hz = /bits/ 64 <358000000>;
+				required-opps = <&rpmhpd_opp_nom>;
+			};
+		};
+
 		mdss: mdss@ae00000 {
 			compatible = "qcom,sdm845-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
@@ -3340,6 +3369,8 @@
 						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
 				assigned-clock-rates = <300000000>,
 						       <19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SDM845_CX>;
 
 				interrupt-parent = <&mdss>;
 				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
@@ -3364,6 +3395,30 @@
 						};
 					};
 				};
+
+				mdp_opp_table: mdp-opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmhpd_opp_min_svs>;
+					};
+
+					opp-171428571 {
+						opp-hz = /bits/ 64 <171428571>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-344000000 {
+						opp-hz = /bits/ 64 <344000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-430000000 {
+						opp-hz = /bits/ 64 <430000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
 			};
 
 			dsi0: dsi@ae94000 {
@@ -3386,6 +3441,8 @@
 					      "core",
 					      "iface",
 					      "bus";
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM845_CX>;
 
 				phys = <&dsi0_phy>;
 				phy-names = "dsi";
@@ -3450,6 +3507,8 @@
 					      "core",
 					      "iface",
 					      "bus";
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM845_CX>;
 
 				phys = <&dsi1_phy>;
 				phy-names = "dsi";
Signature · 7 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#6 lore raw

PATCH v2 4/4 arm64: dts: sc7180: Add DSI and MDP OPP tables and power-domains

In reply to Rajendra Nayak

Add the OPP tables for DSI and MDP based on the perf state/clk requirements, and add the power-domains property to specify the scalable power domain.

---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 49 ++++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)
arch/arm64/boot/dts/qcom/sc7180.dtsi +49 -0
index ad57df2..3430c33f 100644
@@ -2482,6 +2482,8 @@
 						       <19200000>,
 						       <19200000>,
 						       <19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SC7180_CX>;
 
 				interrupt-parent = <&mdss>;
 				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
@@ -2499,6 +2501,31 @@
 						};
 					};
 				};
+
+				mdp_opp_table: mdp-opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-345000000 {
+						opp-hz = /bits/ 64 <345000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-460000000 {
+						opp-hz = /bits/ 64 <460000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+
 			};
 
 			dsi0: dsi@ae94000 {
@@ -2522,6 +2549,9 @@
 					      "iface",
 					      "bus";
 
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SC7180_CX>;
+
 				phys = <&dsi_phy>;
 				phy-names = "dsi";
 
@@ -2547,6 +2577,25 @@
 						};
 					};
 				};
+
+				dsi_opp_table: dsi-opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
 			};
 
 			dsi_phy: dsi-phy@ae94400 {
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
Reviewed-by on v2 2/4
#3 lore raw

Re: [PATCH v2 2/4] drm/msm: dsi: Use OPP API to set clk/perf state

In reply to Rajendra Nayak
Quoted 61 lines · Rajendra Nayak

On SDM845 and SC7180 DSI needs to express a performance state requirement on a power domain depending on the clock rates. Use OPP table from DT to register with OPP framework and use dev_pm_opp_set_rate() to set the clk/perf state.

dev_pm_opp_set_rate() is designed to be equivalent to clk_set_rate() for devices without an OPP table, hence the change works fine on devices/platforms which only need to set a clock rate.

---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)
drivers/gpu/drm/msm/dsi/dsi_host.c +9 -2
index 11ae5b8..09e16b8 100644
@@ -14,6 +14,7 @@
 #include <linux/of_graph.h>
 #include <linux/of_irq.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/pm_opp.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/spinlock.h>
@@ -111,6 +112,9 @@ struct msm_dsi_host {
 	struct clk *pixel_clk_src;
 	struct clk *byte_intf_clk;
 
+	struct opp_table *opp_table;
+	bool has_opp_table;
+
 	u32 byte_clk_rate;
 	u32 pixel_clk_rate;
 	u32 esc_clk_rate;
@@ -512,9 +516,10 @@ int dsi_link_clk_set_rate_6g(struct msm_dsi_host *msm_host)
 	DBG("Set clk rates: pclk=%d, byteclk=%d",
 		msm_host->mode->clock, msm_host->byte_clk_rate);
 
-	ret = clk_set_rate(msm_host->byte_clk, msm_host->byte_clk_rate);
+	ret = dev_pm_opp_set_rate(&msm_host->pdev->dev,
+				  msm_host->byte_clk_rate);
 	if (ret) {
-		pr_err("%s: Failed to set rate byte clk, %d\n", __func__, ret);
+		pr_err("%s: dev_pm_opp_set_rate failed %d\n", __func__, ret);
 		return ret;
 	}
 
@@ -658,6 +663,8 @@ int dsi_link_clk_enable_v2(struct msm_dsi_host *msm_host)
 
 void dsi_link_clk_disable_6g(struct msm_dsi_host *msm_host)
 {
+	/* Drop the performance state vote */
+	dev_pm_opp_set_rate(&msm_host->pdev->dev, 0);
 	clk_disable_unprepare(msm_host->esc_clk);
 	clk_disable_unprepare(msm_host->pixel_clk);
 	if (msm_host->byte_intf_clk)
@@ -1879,6 +1886,18 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
 		goto fail;
 	}

drivers/gpu/drm/msm/dsi/dsi_host.c int msm_dsi_host_init(struct msm_dsi *msm_dsi) · line 1897

Quoted 10 lines
drivers/gpu/drm/msm/dsi/dsi_host.c +9 -0
 
+	msm_host->opp_table = dev_pm_opp_set_clkname(&pdev->dev, "byte");
+	if (IS_ERR(msm_host->opp_table))
+		return PTR_ERR(msm_host->opp_table);
+	/* OPP table is optional */
+	ret = dev_pm_opp_of_add_table(&pdev->dev);
+	if (!ret) {
+		msm_host->has_opp_table = true;
+	} else if (ret != -ENODEV) {
+		dev_err(&pdev->dev, "invalid OPP table in device tree\n");
  		dev_pm_opp_put_clkname(msm_host->opp_table);

drivers/gpu/drm/msm/dsi/dsi_host.c int msm_dsi_host_init(struct msm_dsi *msm_dsi) · line 1899

Quoted 2 lines
drivers/gpu/drm/msm/dsi/dsi_host.c +2 -0
+		return ret;
+	}

With the missing _put_clkname() fixed:

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#4 lore raw

Re: [PATCH v2 2/4] drm/msm: dsi: Use OPP API to set clk/perf state

Quoted 75 lines · Matthias Kaehlcke
Quoted 61 lines · Rajendra Nayak

On SDM845 and SC7180 DSI needs to express a performance state requirement on a power domain depending on the clock rates. Use OPP table from DT to register with OPP framework and use dev_pm_opp_set_rate() to set the clk/perf state.

dev_pm_opp_set_rate() is designed to be equivalent to clk_set_rate() for devices without an OPP table, hence the change works fine on devices/platforms which only need to set a clock rate.

---
  drivers/gpu/drm/msm/dsi/dsi_host.c | 26 ++++++++++++++++++++++++--
  1 file changed, 24 insertions(+), 2 deletions(-)
drivers/gpu/drm/msm/dsi/dsi_host.c +9 -2
index 11ae5b8..09e16b8 100644
@@ -14,6 +14,7 @@
  #include <linux/of_graph.h>
  #include <linux/of_irq.h>
  #include <linux/pinctrl/consumer.h>
+#include <linux/pm_opp.h>
  #include <linux/regmap.h>
  #include <linux/regulator/consumer.h>
  #include <linux/spinlock.h>
@@ -111,6 +112,9 @@ struct msm_dsi_host {
  	struct clk *pixel_clk_src;
  	struct clk *byte_intf_clk;
 
+	struct opp_table *opp_table;
+	bool has_opp_table;
+
  	u32 byte_clk_rate;
  	u32 pixel_clk_rate;
  	u32 esc_clk_rate;
@@ -512,9 +516,10 @@ int dsi_link_clk_set_rate_6g(struct msm_dsi_host *msm_host)
  	DBG("Set clk rates: pclk=%d, byteclk=%d",
  		msm_host->mode->clock, msm_host->byte_clk_rate);
 
-	ret = clk_set_rate(msm_host->byte_clk, msm_host->byte_clk_rate);
+	ret = dev_pm_opp_set_rate(&msm_host->pdev->dev,
+				  msm_host->byte_clk_rate);
  	if (ret) {
-		pr_err("%s: Failed to set rate byte clk, %d\n", __func__, ret);
+		pr_err("%s: dev_pm_opp_set_rate failed %d\n", __func__, ret);
  		return ret;
  	}
 
@@ -658,6 +663,8 @@ int dsi_link_clk_enable_v2(struct msm_dsi_host *msm_host)
 
  void dsi_link_clk_disable_6g(struct msm_dsi_host *msm_host)
  {
+	/* Drop the performance state vote */
+	dev_pm_opp_set_rate(&msm_host->pdev->dev, 0);
  	clk_disable_unprepare(msm_host->esc_clk);
  	clk_disable_unprepare(msm_host->pixel_clk);
  	if (msm_host->byte_intf_clk)
@@ -1879,6 +1886,18 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
  		goto fail;
  	}

drivers/gpu/drm/msm/dsi/dsi_host.c int msm_dsi_host_init(struct msm_dsi *msm_dsi) · line 1897

Quoted 10 lines
drivers/gpu/drm/msm/dsi/dsi_host.c +9 -0
 
+	msm_host->opp_table = dev_pm_opp_set_clkname(&pdev->dev, "byte");
+	if (IS_ERR(msm_host->opp_table))
+		return PTR_ERR(msm_host->opp_table);
+	/* OPP table is optional */
+	ret = dev_pm_opp_of_add_table(&pdev->dev);
+	if (!ret) {
+		msm_host->has_opp_table = true;
+	} else if (ret != -ENODEV) {
+		dev_err(&pdev->dev, "invalid OPP table in device tree\n");
   		dev_pm_opp_put_clkname(msm_host->opp_table);
Quoted 4 lines

drivers/gpu/drm/msm/dsi/dsi_host.c int msm_dsi_host_init(struct msm_dsi *msm_dsi) · line 1899

Quoted 2 lines
drivers/gpu/drm/msm/dsi/dsi_host.c +2 -0
+		return ret;
+	}

With the missing _put_clkname() fixed:

Thanks, I'll fix and resend.

Quoted 3 lines
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation