ASoC: qcom: Add support for SC7180 lpass variant
Subsystems (5)
v5 cover ASoC: qcom: Add support for SC7180 lpass variant
This patch chain add audio support for SC7180 soc by doing the required modification in existing common lpass-cpu/lpass-platform driver. This also fixes some concurrency issue.
This patch series is already tested by Srinivas on Dragon Board 410c. Changes since v4:
- Updated compatible string for sc7180 lpass cpu as suggested by Rob
- Addressed comments by Rob in yaml Documentation.
Ajit Pandey (4):
ASoC: qcom: Add common array to initialize soc based core clocks
ASoC: qcom: lpass-platform: Replace card->dev with component->dev
include: dt-bindings: sound: Add sc7180-lpass bindings header
ASoC: qcom: lpass-sc7180: Add platform driver for lpass audio
Rohit kumar (8):
ASoC: qcom: lpass-cpu: Move ahbix clk to platform specific function
ASoC: qcom: lpass-platform: fix memory leak
ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers
ASoC: qcom: lpass-cpu: fix concurrency issue
dt-bindings: sound: lpass-cpu: Add sc7180 lpass cpu node
ASoC: qcom: lpass-cpu: Use platform_get_resource
ASoC: qcom: lpass-platform: Use platform_get_irq
dt-bindings: sound: lpass-cpu: Move to yaml format
.../devicetree/bindings/sound/qcom,lpass-cpu.txt | 79 -------- .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 179 +++++++++++++++++ include/dt-bindings/sound/sc7180-lpass.h | 10 + sound/soc/qcom/Kconfig | 5 + sound/soc/qcom/Makefile | 2 + sound/soc/qcom/lpass-apq8016.c | 86 ++++++-- sound/soc/qcom/lpass-cpu.c | 204 ++++++++++--------- sound/soc/qcom/lpass-ipq806x.c | 67 +++++++ sound/soc/qcom/lpass-lpaif-reg.h | 157 ++++++++------- sound/soc/qcom/lpass-platform.c | 155 +++++++++++---- sound/soc/qcom/lpass-sc7180.c | 216 +++++++++++++++++++++ sound/soc/qcom/lpass.h | 63 +++++- 12 files changed, 924 insertions(+), 299 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml create mode 100644 include/dt-bindings/sound/sc7180-lpass.h create mode 100644 sound/soc/qcom/lpass-sc7180.c
Signature · 2 lines
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
PATCH v5 1/12 ASoC: qcom: Add common array to initialize soc based core clocks
From: Ajit Pandey <[email protected]>
LPASS variants have their own soc specific clocks that needs to be enabled for MI2S audio support. Added a common variable in drvdata to initialize such clocks using bulk clk api. Such clock names is defined in variants specific data and needs to fetched during init.
--- sound/soc/qcom/lpass-apq8016.c | 39 +++++++++++++++++++-------------------- sound/soc/qcom/lpass.h | 10 +++++++--- 2 files changed, 26 insertions(+), 23 deletions(-)
sound/soc/qcom/lpass-apq8016.c +19 -20
@@ -161,32 +161,27 @@ static int apq8016_lpass_free_dma_channel(struct lpass_data *drvdata, int chan)static int apq8016_lpass_init (struct platform_device *pdev) {struct lpass_data *drvdata =platform_get_drvdata (pdev); +struct lpass_variant *variant = drvdata->variant;struct device *dev = &pdev->dev; -int ret; +int ret, i; - drvdata->pcnoc_mport_clk =devm_clk_get (dev,"pcnoc-mport-clk" ); -if (IS_ERR (drvdata->pcnoc_mport_clk)) { -dev_err (dev,"error getting pcnoc-mport-clk: %ld\n" , -PTR_ERR (drvdata->pcnoc_mport_clk)); -return PTR_ERR (drvdata->pcnoc_mport_clk); - } - ret =clk_prepare_enable (drvdata->pcnoc_mport_clk); + drvdata->clks =devm_kcalloc (dev, variant->num_clks, +sizeof (*drvdata->clks),GFP_KERNEL ); + drvdata->num_clks = variant->num_clks; + +for (i =0 ; i < drvdata->num_clks; i++) + drvdata->clks[i].id = variant->clk_name[i]; + + ret =devm_clk_bulk_get (dev, drvdata->num_clks, drvdata->clks);if (ret) { -dev_err (dev,"Error enabling pcnoc-mport-clk: %d\n" , ret); +dev_err (dev,"Failed to get clocks %d\n" , ret);return ret; } - drvdata->pcnoc_sway_clk =devm_clk_get (dev,"pcnoc-sway-clk" ); -if (IS_ERR (drvdata->pcnoc_sway_clk)) { -dev_err (dev,"error getting pcnoc-sway-clk: %ld\n" , -PTR_ERR (drvdata->pcnoc_sway_clk)); -return PTR_ERR (drvdata->pcnoc_sway_clk); - } - - ret =clk_prepare_enable (drvdata->pcnoc_sway_clk); + ret =clk_bulk_prepare_enable (drvdata->num_clks, drvdata->clks);if (ret) { -dev_err (dev,"Error enabling pcnoc_sway_clk: %d\n" , ret); +dev_err (dev,"apq8016 clk_enable failed\n" );return ret; }
@@ -197,8 +192,7 @@ static int apq8016_lpass_exit(struct platform_device *pdev) {struct lpass_data *drvdata =platform_get_drvdata (pdev); -clk_disable_unprepare (drvdata->pcnoc_mport_clk); -clk_disable_unprepare (drvdata->pcnoc_sway_clk); +clk_bulk_disable_unprepare (drvdata->num_clks, drvdata->clks);return 0 ; }
@@ -219,6 +213,11 @@ static struct lpass_variant apq8016_data = { .wrdma_reg_stride = 0x1000, .wrdma_channel_start = 5, .wrdma_channels = 2, + .clk_name = (const char *[]) { +"pcnoc-mport-clk" , +"pcnoc-sway-clk" , + }, + .num_clks = 2, .dai_driver = apq8016_lpass_cpu_dai_driver, .num_dai = ARRAY_SIZE(apq8016_lpass_cpu_dai_driver), .dai_osr_clk_names = (const char *[]) {
sound/soc/qcom/lpass.h +7 -3
@@ -51,9 +51,9 @@ struct lpass_data {/* used it for handling interrupt per dma channel */ struct snd_pcm_substream *substream[LPASS_MAX_DMA_CHANNELS ]; -/* 8016 specific */ -struct clk *pcnoc_mport_clk; -struct clk *pcnoc_sway_clk; +/* SOC specific clock list */ +struct clk_bulk_data *clks; +int num_clks; };
@@ -89,6 +89,10 @@ struct lpass_variant {int num_dai;const char *const *dai_osr_clk_names;const char *const *dai_bit_clk_names; + +/* SOC specific clocks configuration */ +const char **clk_name; +int num_clks; };/* register the platform driver from the CPU DAI driver */
Signature · 2 lines
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
PATCH v5 2/12 ASoC: qcom: lpass-cpu: Move ahbix clk to platform specific function
In reply to Rohit kumarAhbix clock is optional clock and not needed for all platforms. Move it to lpass-apq8016/ipq806x as it is not needed for sc7180.
--- sound/soc/qcom/lpass-apq8016.c | 27 ++++++++++++++++++++++++++ sound/soc/qcom/lpass-cpu.c | 40 ++++++++++----------------------------- sound/soc/qcom/lpass-ipq806x.c | 43 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 80 insertions(+), 30 deletions(-)
sound/soc/qcom/lpass-apq8016.c +27 -0
@@ -185,7 +185,33 @@ static int apq8016_lpass_init(struct platform_device *pdev)return ret; } + drvdata->ahbix_clk =devm_clk_get (dev,"ahbix-clk" ); +if (IS_ERR (drvdata->ahbix_clk)) { +dev_err (dev,"error getting ahbix-clk: %ld\n" , +PTR_ERR (drvdata->ahbix_clk)); + ret =PTR_ERR (drvdata->ahbix_clk); + goto err_ahbix_clk; + } + + ret =clk_set_rate (drvdata->ahbix_clk,LPASS_AHBIX_CLOCK_FREQUENCY ); +if (ret) { +dev_err (dev,"error setting rate on ahbix_clk: %d\n" , ret); + goto err_ahbix_clk; + } +dev_dbg (dev,"set ahbix_clk rate to %lu\n" , +clk_get_rate (drvdata->ahbix_clk)); + + ret =clk_prepare_enable (drvdata->ahbix_clk); +if (ret) { +dev_err (dev,"error enabling ahbix_clk: %d\n" , ret); + goto err_ahbix_clk; + } +return 0 ; + +err_ahbix_clk: +clk_bulk_disable_unprepare (drvdata->num_clks, drvdata->clks); +return ret; }static int apq8016_lpass_exit (struct platform_device *pdev)
@@ -193,6 +219,7 @@ static int apq8016_lpass_exit(struct platform_device *pdev)struct lpass_data *drvdata =platform_get_drvdata (pdev);clk_bulk_disable_unprepare (drvdata->num_clks, drvdata->clks); +clk_disable_unprepare (drvdata->ahbix_clk);return 0 ; }
sound/soc/qcom/lpass-cpu.c +10 -30
@@ -566,8 +566,13 @@ int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev)return PTR_ERR (drvdata->lpaif_map); } -if (variant->init) - variant->init (pdev); +if (variant->init) { + ret = variant->init (pdev); +if (ret) { +dev_err (dev,"error initializing variant: %d\n" , ret); +return ret; + } + }for (i =0 ; i < variant->num_dai; i++) { dai_id = variant->dai_driver[i].id;
@@ -594,46 +599,22 @@ int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev) } } - drvdata->ahbix_clk =devm_clk_get (dev,"ahbix-clk" ); -if (IS_ERR (drvdata->ahbix_clk)) { -dev_err (dev,"error getting ahbix-clk: %ld\n" , -PTR_ERR (drvdata->ahbix_clk)); -return PTR_ERR (drvdata->ahbix_clk); - } - - ret =clk_set_rate (drvdata->ahbix_clk,LPASS_AHBIX_CLOCK_FREQUENCY ); -if (ret) { -dev_err (dev,"error setting rate on ahbix_clk: %d\n" , ret); -return ret; - } -dev_dbg (dev,"set ahbix_clk rate to %lu\n" , -clk_get_rate (drvdata->ahbix_clk)); - - ret =clk_prepare_enable (drvdata->ahbix_clk); -if (ret) { -dev_err (dev,"error enabling ahbix_clk: %d\n" , ret); -return ret; - } - ret =devm_snd_soc_register_component (dev, &lpass_cpu_comp_driver, variant->dai_driver, variant->num_dai);if (ret) {dev_err (dev,"error registering cpu driver: %d\n" , ret); - goto err_clk; + goto err; } ret =asoc_qcom_lpass_platform_register (pdev);if (ret) {dev_err (dev,"error registering platform driver: %d\n" , ret); - goto err_clk; + goto err; } -return 0 ; - -err_clk: -clk_disable_unprepare (drvdata->ahbix_clk); +err:return ret; }EXPORT_SYMBOL_GPL (asoc_qcom_lpass_cpu_platform_probe);
@@ -645,7 +626,6 @@ int asoc_qcom_lpass_cpu_platform_remove(struct platform_device *pdev)if (drvdata->variant->exit) drvdata->variant->exit (pdev); -clk_disable_unprepare (drvdata->ahbix_clk);return 0 ; }
sound/soc/qcom/lpass-ipq806x.c +43 -0
55 lines not on this page · raw message
Signature · 2 lines
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
PATCH v5 3/12 ASoC: qcom: lpass-platform: Replace card->dev with component->dev
In reply to Rohit kumarFrom: Ajit Pandey <[email protected]>
We are allocating dma memory for component->dev but trying to mmap such memory for substream->pcm->card->dev. Replace device argument in mmap with component->dev to fix this.
--- sound/soc/qcom/lpass-platform.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
sound/soc/qcom/lpass-platform.c +2 -3
@@ -400,9 +400,8 @@ static int lpass_platform_pcmops_mmap(struct snd_soc_component *component, {struct snd_pcm_runtime *runtime = substream->runtime; -return dma_mmap_coherent (substream->pcm->card->dev, vma, - runtime->dma_area, runtime->dma_addr, - runtime->dma_bytes); +return dma_mmap_coherent (component->dev, vma, runtime->dma_area, + runtime->dma_addr, runtime->dma_bytes); } static irqreturn_t lpass_dma_interrupt_handler(
Signature · 2 lines
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
PATCH v5 4/12 ASoC: qcom: lpass-platform: fix memory leak
In reply to Rohit kumarlpass_pcm_data is never freed. Free it in close
ops to avoid memory leak.
--- sound/soc/qcom/lpass-platform.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
sound/soc/qcom/lpass-platform.c +2 -1
@@ -61,7 +61,7 @@ static int lpass_platform_pcmops_open(struct snd_soc_component *component,int ret, dma_ch, dir = substream->stream;struct lpass_pcm_data *data; - data =devm_kzalloc (soc_runtime->dev,sizeof (*data),GFP_KERNEL ); + data =kzalloc (sizeof (*data),GFP_KERNEL );if (!data)return -ENOMEM ;
@@ -118,6 +118,7 @@ static int lpass_platform_pcmops_close(struct snd_soc_component *component,if (v->free_dma_channel) v->free_dma_channel (drvdata, data->dma_ch); +kfree (data);return 0 ; }
Signature · 2 lines
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
PATCH v5 5/12 ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers
In reply to Rohit kumarI2SCTL and DMACTL registers has different bits alignment for newer LPASS variants of SC7180 soc. Use REG_FIELD_ID() to define the reg_fields in platform specific file and removed shifts and mask macros for such registers from header file.
--- sound/soc/qcom/lpass-apq8016.c | 24 ++++++ sound/soc/qcom/lpass-cpu.c | 156 ++++++++++++++++++++++++++------------ sound/soc/qcom/lpass-ipq806x.c | 24 ++++++ sound/soc/qcom/lpass-lpaif-reg.h | 157 +++++++++++++++++++++------------------ sound/soc/qcom/lpass-platform.c | 145 ++++++++++++++++++++++++++++-------- sound/soc/qcom/lpass.h | 53 +++++++++++++ 6 files changed, 407 insertions(+), 152 deletions(-)
sound/soc/qcom/lpass-apq8016.c +24 -0
@@ -240,6 +240,30 @@ static struct lpass_variant apq8016_data = { .wrdma_reg_stride = 0x1000, .wrdma_channel_start = 5, .wrdma_channels = 2, + .loopback = REG_FIELD_ID(0x1000, 15, 15, 4, 0x1000), + .spken = REG_FIELD_ID(0x1000, 14, 14, 4, 0x1000), + .spkmode = REG_FIELD_ID(0x1000, 10, 13, 4, 0x1000), + .spkmono = REG_FIELD_ID(0x1000, 9, 9, 4, 0x1000), + .micen = REG_FIELD_ID(0x1000, 8, 8, 4, 0x1000), + .micmode = REG_FIELD_ID(0x1000, 4, 7, 4, 0x1000), + .micmono = REG_FIELD_ID(0x1000, 3, 3, 4, 0x1000), + .wssrc = REG_FIELD_ID(0x1000, 2, 2, 4, 0x1000), + .bitwidth = REG_FIELD_ID(0x1000, 0, 0, 4, 0x1000), + + .rdma_dyncclk = REG_FIELD_ID(0x8400, 12, 12, 2, 0x1000), + .rdma_bursten = REG_FIELD_ID(0x8400, 11, 11, 2, 0x1000), + .rdma_wpscnt = REG_FIELD_ID(0x8400, 8, 10, 2, 0x1000), + .rdma_intf = REG_FIELD_ID(0x8400, 4, 7, 2, 0x1000), + .rdma_fifowm = REG_FIELD_ID(0x8400, 1, 3, 2, 0x1000), + .rdma_enable = REG_FIELD_ID(0x8400, 0, 0, 2, 0x1000), + + .wrdma_dyncclk = REG_FIELD_ID(0xB000, 12, 12, 2, 0x1000), + .wrdma_bursten = REG_FIELD_ID(0xB000, 11, 11, 2, 0x1000), + .wrdma_wpscnt = REG_FIELD_ID(0xB000, 8, 10, 2, 0x1000), + .wrdma_intf = REG_FIELD_ID(0xB000, 4, 7, 2, 0x1000), + .wrdma_fifowm = REG_FIELD_ID(0xB000, 1, 3, 2, 0x1000), + .wrdma_enable = REG_FIELD_ID(0xB000, 0, 0, 2, 0x1000), + .clk_name = (const char *[]) {"pcnoc-mport-clk" ,"pcnoc-sway-clk" ,
sound/soc/qcom/lpass-cpu.c +107 -49
247 lines not on this page · raw message
sound/soc/qcom/lpass-ipq806x.c +24 -0
@@ -123,6 +123,30 @@ static struct lpass_variant ipq806x_data = { .wrdma_reg_stride = 0x1000, .wrdma_channel_start = 5, .wrdma_channels = 4, + .loopback = REG_FIELD_ID(0x0010, 15, 15, 5, 0x4), + .spken = REG_FIELD_ID(0x0010, 14, 14, 5, 0x4), + .spkmode = REG_FIELD_ID(0x0010, 10, 13, 5, 0x4), + .spkmono = REG_FIELD_ID(0x0010, 9, 9, 5, 0x4), + .micen = REG_FIELD_ID(0x0010, 8, 8, 5, 0x4), + .micmode = REG_FIELD_ID(0x0010, 4, 7, 5, 0x4), + .micmono = REG_FIELD_ID(0x0010, 3, 3, 5, 0x4), + .wssrc = REG_FIELD_ID(0x0010, 2, 2, 5, 0x4), + .bitwidth = REG_FIELD_ID(0x0010, 0, 0, 5, 0x4), + + .rdma_dyncclk = REG_FIELD_ID(0x6000, 12, 12, 4, 0x1000), + .rdma_bursten = REG_FIELD_ID(0x6000, 11, 11, 4, 0x1000), + .rdma_wpscnt = REG_FIELD_ID(0x6000, 8, 10, 4, 0x1000), + .rdma_intf = REG_FIELD_ID(0x6000, 4, 7, 4, 0x1000), + .rdma_fifowm = REG_FIELD_ID(0x6000, 1, 3, 4, 0x1000), + .rdma_enable = REG_FIELD_ID(0x6000, 0, 0, 4, 0x1000), + + .wrdma_dyncclk = REG_FIELD_ID(0xB000, 12, 12, 4, 0x1000), + .wrdma_bursten = REG_FIELD_ID(0xB000, 11, 11, 4, 0x1000), + .wrdma_wpscnt = REG_FIELD_ID(0xB000, 8, 10, 4, 0x1000), + .wrdma_intf = REG_FIELD_ID(0xB000, 4, 7, 4, 0x1000), + .wrdma_fifowm = REG_FIELD_ID(0xB000, 1, 3, 4, 0x1000), + .wrdma_enable = REG_FIELD_ID(0xB000, 0, 0, 4, 0x1000), + .dai_driver = &ipq806x_lpass_cpu_dai_driver, .num_dai = 1, .dai_osr_clk_names = (const char *[]) {
sound/soc/qcom/lpass-lpaif-reg.h +84 -73
181 lines not on this page · raw message
sound/soc/qcom/lpass-platform.c +115 -30
239 lines not on this page · raw message
sound/soc/qcom/lpass.h +53 -0
71 lines not on this page · raw message
Signature · 2 lines
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
PATCH v5 7/12 dt-bindings: sound: lpass-cpu: Add sc7180 lpass cpu node
In reply to Rohit kumarAdd dt-bindings to support "qcom,lpass-cpu-sc7180" node.
--- .../devicetree/bindings/sound/qcom,lpass-cpu.txt | 55 +++++++++++++++++++++- 1 file changed, 53 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt +53 -2
@@ -4,7 +4,8 @@ This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS). Required properties: -- compatible : "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" +- compatible : "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" or + "qcom,sc7180-lpass-cpu" - clocks : Must contain an entry for each entry in clock-names. - clock-names : A list which must include the following entries: * "ahbix-clk"
@@ -18,6 +19,13 @@ Required properties: * "mi2s-bit-clk3" * "pcnoc-mport-clk" * "pcnoc-sway-clk" + : required clocks for "qcom,lpass-cpu-sc7180" + * "audio-core" + * "mclk0" + * "mi2s-bit-clk0" + * "mi2s-bit-clk1" + * "pcnoc-sway-clk" + * "pcnoc-mport-clk" - interrupts : Must contain an entry for each entry in interrupt-names.
@@ -53,7 +61,8 @@ Required properties for each DAI (represented by a subnode): Note that adding a subnode changes the default to "no lines configured", so both playback and capture lines should be configured when a subnode is added. -Example: +Examples: +1) lpass@28100000 { compatible = "qcom,lpass-cpu";
@@ -77,3 +86,45 @@ lpass@28100000 { qcom,playback-sd-lines = <0 1>; }; }; + +2) + +#include <dt-bindings/sound/sc7180-lpass.h> + +lpass_cpu: lpass { + compatible = "qcom,sc7180-lpass-cpu"; + + reg = <0 0x62F00000 0 0x29000>; + + iommus = <&apps_smmu 0x1020 0>; + + power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; + clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, + <&lpasscorecc LPASS_AUDIO_CORE_CORE_CLK>, + <&lpasscorecc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>, + <&lpasscorecc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>, + <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>, + <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>; + clock-names = "pcnoc-sway-clk", "audio-core", + "mclk0", "pcnoc-mport-clk", + "mi2s-bit-clk0", "mi2s-bit-clk1"; + interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "lpass-irq-lpaif"; + + + #sound-dai-cells = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + mi2s-primary@0 { + reg = <MI2S_PRIMARY>; + qcom,playback-sd-lines = <1>; + qcom,capture-sd-lines = <0>; + }; + + mi2s-secondary@1 { + reg = <MI2S_SECONDARY>; + qcom,playback-sd-lines = <0>; + }; +};
Signature · 2 lines
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
PATCH v5 6/12 ASoC: qcom: lpass-cpu: fix concurrency issue
In reply to Rohit kumari2sctl register value is set to 0 during hw_free(). This impacts any ongoing concurrent session on the same i2s port. As trigger() stop already resets enable bit to 0, there is no need of explicit hw_free. Removing it to fix the issue.
--- sound/soc/qcom/lpass-cpu.c | 16 ---------------- 1 file changed, 16 deletions(-)
sound/soc/qcom/lpass-cpu.c +0 -16
@@ -266,21 +266,6 @@ static int lpass_cpu_daiops_hw_params(struct snd_pcm_substream *substream,return 0 ; } -static int lpass_cpu_daiops_hw_free (struct snd_pcm_substream *substream, -struct snd_soc_dai *dai) -{ -struct lpass_data *drvdata =snd_soc_dai_get_drvdata (dai); -int ret; - - ret =regmap_write (drvdata->lpaif_map, -LPAIF_I2SCTL_REG (drvdata->variant, dai->driver->id), -0 ); -if (ret) -dev_err (dai->dev,"error writing to i2sctl reg: %d\n" , ret); - -return ret; -} -static int lpass_cpu_daiops_prepare (struct snd_pcm_substream *substream,struct snd_soc_dai *dai) {
@@ -350,7 +335,6 @@ const struct snd_soc_dai_ops asoc_qcom_lpass_cpu_dai_ops = { .startup = lpass_cpu_daiops_startup, .shutdown = lpass_cpu_daiops_shutdown, .hw_params = lpass_cpu_daiops_hw_params, - .hw_free = lpass_cpu_daiops_hw_free, .prepare = lpass_cpu_daiops_prepare, .trigger = lpass_cpu_daiops_trigger, };
Signature · 2 lines
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
PATCH v5 8/12 include: dt-bindings: sound: Add sc7180-lpass bindings header
In reply to Rohit kumarFrom: Ajit Pandey <[email protected]>
Add header defining dai-id and mclk id for SC7180 lpass soc.
--- include/dt-bindings/sound/sc7180-lpass.h | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 include/dt-bindings/sound/sc7180-lpass.h
include/dt-bindings/sound/sc7180-lpass.h new file +10 -0
@@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __DT_SC7180_LPASS_H +#define __DT_SC7180_LPASS_H + +#define MI2S_PRIMARY 0 +#define MI2S_SECONDARY 1 + +#define LPASS_MCLK0 0 + +#endif /* __DT_APQ8016_LPASS_H */
Signature · 2 lines
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
PATCH v5 9/12 ASoC: qcom: lpass-sc7180: Add platform driver for lpass audio
In reply to Rohit kumarFrom: Ajit Pandey <[email protected]>
Add platform driver for configuring sc7180 lpass core I2S and DMA configuration to support playback & capture to external codecs connected over primary & secondary MI2S interfaces.
--- sound/soc/qcom/Kconfig | 5 + sound/soc/qcom/Makefile | 2 + sound/soc/qcom/lpass-sc7180.c | 216 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 223 insertions(+) create mode 100644 sound/soc/qcom/lpass-sc7180.c
sound/soc/qcom/Kconfig +5 -0
@@ -24,6 +24,11 @@ config SND_SOC_LPASS_APQ8016 select SND_SOC_LPASS_CPU select SND_SOC_LPASS_PLATFORM +config SND_SOC_LPASS_SC7180 + tristate + select SND_SOC_LPASS_CPU + select SND_SOC_LPASS_PLATFORM + config SND_SOC_STORM tristate "ASoC I2S support for Storm boards" depends on SND_SOC_QCOM
sound/soc/qcom/Makefile +2 -0
@@ -4,11 +4,13 @@ snd-soc-lpass-cpu-objs := lpass-cpu.o snd-soc-lpass-platform-objs := lpass-platform.o snd-soc-lpass-ipq806x-objs := lpass-ipq806x.o snd-soc-lpass-apq8016-objs := lpass-apq8016.o +snd-soc-lpass-sc7180-objs := lpass-sc7180.o obj-$(CONFIG_SND_SOC_LPASS_CPU) += snd-soc-lpass-cpu.o obj-$(CONFIG_SND_SOC_LPASS_PLATFORM) += snd-soc-lpass-platform.o obj-$(CONFIG_SND_SOC_LPASS_IPQ806X) += snd-soc-lpass-ipq806x.o obj-$(CONFIG_SND_SOC_LPASS_APQ8016) += snd-soc-lpass-apq8016.o +obj-$(CONFIG_SND_SOC_LPASS_SC7180) += snd-soc-lpass-sc7180.o # Machine snd-soc-storm-objs := storm.o
sound/soc/qcom/lpass-sc7180.c new file +216 -0
216 lines not on this page · raw message
Signature · 2 lines
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
PATCH v5 11/12 ASoC: qcom: lpass-platform: Use platform_get_irq
In reply to Rohit kumarplatform_get_irq_byname() is used when there is list of interrupts in the device node. As lpass-platform has only one interrupt entry, use platform_get_irq() instead.
--- sound/soc/qcom/lpass-platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/qcom/lpass-platform.c +1 -1
@@ -638,7 +638,7 @@ int asoc_qcom_lpass_platform_register(struct platform_device *pdev)struct lpass_variant *v = drvdata->variant;int ret; - drvdata->lpaif_irq =platform_get_irq_byname (pdev,"lpass-irq-lpaif" ); + drvdata->lpaif_irq =platform_get_irq (pdev,0 );if (drvdata->lpaif_irq <0 )return -ENODEV ;
Signature · 2 lines
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
PATCH v5 10/12 ASoC: qcom: lpass-cpu: Use platform_get_resource
In reply to Rohit kumarplatform_get_resource_byname() is used when there is list of reg entries. As lpass-cpu node has only one reg entry, use platform_get_resource() instead.
--- sound/soc/qcom/lpass-cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/qcom/lpass-cpu.c +1 -1
@@ -575,7 +575,7 @@ int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev)of_lpass_cpu_parse_dai_data (dev, drvdata); - res =platform_get_resource_byname (pdev,IORESOURCE_MEM ,"lpass-lpaif" ); + res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); drvdata->lpaif =devm_ioremap_resource (dev, res);if (IS_ERR ((void const __force *)drvdata->lpaif)) {
Signature · 2 lines
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
PATCH v5 12/12 dt-bindings: sound: lpass-cpu: Move to yaml format
In reply to Rohit kumarUpdate lpass-cpu binding with yaml formats.
--- .../devicetree/bindings/sound/qcom,lpass-cpu.txt | 130 --------------- .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 179 +++++++++++++++++++++ 2 files changed, 179 insertions(+), 130 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt deleted +0 -130
@@ -1,130 +0,0 @@ -* Qualcomm Technologies LPASS CPU DAI - -This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS). - -Required properties: - -- compatible : "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" or - "qcom,sc7180-lpass-cpu" -- clocks : Must contain an entry for each entry in clock-names. -- clock-names : A list which must include the following entries: - * "ahbix-clk" - * "mi2s-osr-clk" - * "mi2s-bit-clk" - : required clocks for "qcom,lpass-cpu-apq8016" - * "ahbix-clk" - * "mi2s-bit-clk0" - * "mi2s-bit-clk1" - * "mi2s-bit-clk2" - * "mi2s-bit-clk3" - * "pcnoc-mport-clk" - * "pcnoc-sway-clk" - : required clocks for "qcom,lpass-cpu-sc7180" - * "audio-core" - * "mclk0" - * "mi2s-bit-clk0" - * "mi2s-bit-clk1" - * "pcnoc-sway-clk" - * "pcnoc-mport-clk" - -- interrupts : Must contain an entry for each entry in - interrupt-names. -- interrupt-names : A list which must include the following entries: - * "lpass-irq-lpaif" -- pinctrl-N : One property must exist for each entry in - pinctrl-names. See ../pinctrl/pinctrl-bindings.txt - for details of the property values. -- pinctrl-names : Must contain a "default" entry. -- reg : Must contain an address for each entry in reg-names. -- reg-names : A list which must include the following entries: - * "lpass-lpaif" -- #address-cells : Must be 1 -- #size-cells : Must be 0 - - - -Optional properties: - -- qcom,adsp : Phandle for the audio DSP node - -By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels. -The SD lines to use can be configured by adding subnodes for each of the DAIs. - -Required properties for each DAI (represented by a subnode): -- reg : Must be one of the DAI IDs - (usually part of dt-bindings header) -- qcom,playback-sd-lines: List of serial data lines to use for playback - Each SD line should be represented by a number from 0-3. -- qcom,capture-sd-lines : List of serial data lines to use for capture - Each SD line should be represented by a number from 0-3. - -Note that adding a subnode changes the default to "no lines configured", -so both playback and capture lines should be configured when a subnode is added. - -Examples: -1) - -lpass@28100000 { - compatible = "qcom,lpass-cpu"; - clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>; - clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk"; - interrupts = <0 85 1>; - interrupt-names = "lpass-irq-lpaif"; - pinctrl-names = "default", "idle"; - pinctrl-0 = <&mi2s_default>; - pinctrl-1 = <&mi2s_idle>; - reg = <0x28100000 0x10000>; - reg-names = "lpass-lpaif"; - qcom,adsp = <&adsp>; - - #address-cells = <1>; - #size-cells = <0>; - - /* Optional to set different MI2S SD lines */ - dai@3 { - reg = <MI2S_QUATERNARY>; - qcom,playback-sd-lines = <0 1>; - }; -}; - -2) - -#include <dt-bindings/sound/sc7180-lpass.h> - -lpass_cpu: lpass { - compatible = "qcom,sc7180-lpass-cpu"; - - reg = <0 0x62F00000 0 0x29000>; - - iommus = <&apps_smmu 0x1020 0>; - - power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; - clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, - <&lpasscorecc LPASS_AUDIO_CORE_CORE_CLK>, - <&lpasscorecc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>, - <&lpasscorecc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>, - <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>, - <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>; - clock-names = "pcnoc-sway-clk", "audio-core", - "mclk0", "pcnoc-mport-clk", - "mi2s-bit-clk0", "mi2s-bit-clk1"; - interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "lpass-irq-lpaif"; - - - #sound-dai-cells = <1>; - - #address-cells = <1>; - #size-cells = <0>; - - mi2s-primary@0 { - reg = <MI2S_PRIMARY>; - qcom,playback-sd-lines = <1>; - qcom,capture-sd-lines = <0>; - }; - - mi2s-secondary@1 { - reg = <MI2S_SECONDARY>; - qcom,playback-sd-lines = <0>; - }; -};
Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml new file +179 -0
179 lines not on this page · raw message
Signature · 2 lines
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
Re: [PATCH v5 07/12] dt-bindings: sound: lpass-cpu: Add sc7180 lpass cpu node
In reply to Rohit kumarQuoted 7 lines · Rohit kumar
Add dt-bindings to support "qcom,lpass-cpu-sc7180" node.
Signed-off-by Rohit kumar <[email protected]>--- .../devicetree/bindings/sound/qcom,lpass-cpu.txt | 55 +++++++++++++++++++++- 1 file changed, 53 insertions(+), 2 deletions(-)
Rob Herring
maintainerRe: [PATCH v5 12/12] dt-bindings: sound: lpass-cpu: Move to yaml format
In reply to Rohit kumarQuoted 205 lines · Rohit kumar
Update lpass-cpu binding with yaml formats.
Signed-off-by Rohit kumar <[email protected]>--- .../devicetree/bindings/sound/qcom,lpass-cpu.txt | 130 --------------- .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 179 +++++++++++++++++++++ 2 files changed, 179 insertions(+), 130 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yamlDocumentation/devicetree/bindings/sound/qcom,lpass-cpu.txt deleted +0
-130@@ -1,130 +0,0 @@ -* Qualcomm Technologies LPASS CPU DAI - -This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS). - -Required properties: - -- compatible : "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" or - "qcom,sc7180-lpass-cpu" -- clocks : Must contain an entry for each entry in clock-names. -- clock-names : A list which must include the following entries: - * "ahbix-clk" - * "mi2s-osr-clk" - * "mi2s-bit-clk" - : required clocks for "qcom,lpass-cpu-apq8016" - * "ahbix-clk" - * "mi2s-bit-clk0" - * "mi2s-bit-clk1" - * "mi2s-bit-clk2" - * "mi2s-bit-clk3" - * "pcnoc-mport-clk" - * "pcnoc-sway-clk" - : required clocks for "qcom,lpass-cpu-sc7180" - * "audio-core" - * "mclk0" - * "mi2s-bit-clk0" - * "mi2s-bit-clk1" - * "pcnoc-sway-clk" - * "pcnoc-mport-clk" - -- interrupts : Must contain an entry for each entry in - interrupt-names. -- interrupt-names : A list which must include the following entries: - * "lpass-irq-lpaif" -- pinctrl-N : One property must exist for each entry in - pinctrl-names. See ../pinctrl/pinctrl-bindings.txt - for details of the property values. -- pinctrl-names : Must contain a "default" entry. -- reg : Must contain an address for each entry in reg-names. -- reg-names : A list which must include the following entries: - * "lpass-lpaif" -- #address-cells : Must be 1 -- #size-cells : Must be 0 - - - -Optional properties: - -- qcom,adsp : Phandle for the audio DSP node - -By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels. -The SD lines to use can be configured by adding subnodes for each of the DAIs. - -Required properties for each DAI (represented by a subnode): -- reg : Must be one of the DAI IDs - (usually part of dt-bindings header) -- qcom,playback-sd-lines: List of serial data lines to use for playback - Each SD line should be represented by a number from 0-3. -- qcom,capture-sd-lines : List of serial data lines to use for capture - Each SD line should be represented by a number from 0-3. - -Note that adding a subnode changes the default to "no lines configured", -so both playback and capture lines should be configured when a subnode is added. - -Examples: -1) - -lpass@28100000 { - compatible = "qcom,lpass-cpu"; - clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>; - clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk"; - interrupts = <0 85 1>; - interrupt-names = "lpass-irq-lpaif"; - pinctrl-names = "default", "idle"; - pinctrl-0 = <&mi2s_default>; - pinctrl-1 = <&mi2s_idle>; - reg = <0x28100000 0x10000>; - reg-names = "lpass-lpaif"; - qcom,adsp = <&adsp>; - - #address-cells = <1>; - #size-cells = <0>; - - /* Optional to set different MI2S SD lines */ - dai@3 { - reg = <MI2S_QUATERNARY>; - qcom,playback-sd-lines = <0 1>; - }; -}; - -2) - -#include <dt-bindings/sound/sc7180-lpass.h> - -lpass_cpu: lpass { - compatible = "qcom,sc7180-lpass-cpu"; - - reg = <0 0x62F00000 0 0x29000>; - - iommus = <&apps_smmu 0x1020 0>; - - power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; - clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, - <&lpasscorecc LPASS_AUDIO_CORE_CORE_CLK>, - <&lpasscorecc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>, - <&lpasscorecc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>, - <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>, - <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>; - clock-names = "pcnoc-sway-clk", "audio-core", - "mclk0", "pcnoc-mport-clk", - "mi2s-bit-clk0", "mi2s-bit-clk1"; - interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "lpass-irq-lpaif"; - - - #sound-dai-cells = <1>; - - #address-cells = <1>; - #size-cells = <0>; - - mi2s-primary@0 { - reg = <MI2S_PRIMARY>; - qcom,playback-sd-lines = <1>; - qcom,capture-sd-lines = <0>; - }; - - mi2s-secondary@1 { - reg = <MI2S_SECONDARY>; - qcom,playback-sd-lines = <0>; - }; -};Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml new file +53
-0@@ -0,0 +1,179 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies Inc. LPASS CPU dai driver bindings + +maintainers: + - Srinivas Kandagatla <[email protected]> + - Rohit kumar <[email protected]> + +description: | + Qualcomm Technologies Inc. SOC Low-Power Audio SubSystem (LPASS) that consist + of MI2S interface for audio data transfer on external codecs. LPASS cpu driver + is a module to configure Low-Power Audio Interface(LPAIF) core registers + across different IP versions. + +properties: + compatible: + enum: + - qcom,lpass-cpu + - qcom,apq8016-lpass-cpu + - qcom,sc7180-lpass-cpu + + reg: + maxItems: 1 + description: LPAIF core registers + + clocks: + minItems: 3 + maxItems: 6 + + clock-names: + minItems: 3 + maxItems: 6 + + interrupts: + maxItems: 1 + description: LPAIF DMA buffer interrupt + + qcom,adsp: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle for the audio DSP node + + iommus: + maxItems: 1 + description: Phandle to apps_smmu node with sid mask + + power-domains: + maxItems: 1 + + '#sound-dai-cells':
Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml line 63
Quoted 10 lines
Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml new file +10
-0+ const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "(^mi2s-[0-9a-f]$|mi2s)":
I believe this will work:
"^mi2s(-[0-9a-f])?$"
Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml line 73
Quoted 10 lines
Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml new file +10
-0+ type: object + description: Required properties for each DAI + + properties: + reg: + maxItems: 1 + description: Must be one of the DAI ID + + required: + - reg
additionalProperties: false
Quoted 91 lines
Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml new file +91
-0+ +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - '#sound-dai-cells' + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: qcom,lpass-cpu + + then: + properties: + clock-names: + items: + - const: ahbix-clk + - const: mi2s-osr-clk + - const: mi2s-bit-clk + + - if: + properties: + compatible: + contains: + const: qcom,apq8016-lpass-cpu + + then: + properties: + clock-names: + items: + - const: ahbix-clk + - const: mi2s-bit-clk0 + - const: mi2s-bit-clk1 + - const: mi2s-bit-clk2 + - const: mi2s-bit-clk3 + - const: pcnoc-mport-clk + - const: pcnoc-sway-clk + + - if: + properties: + compatible: + contains: + const: qcom,sc7180-lpass-cpu + + then: + properties: + clock-names: + items: + - const: pcnoc-sway-clk + - const: audio-core + - const: mclk0 + - const: pcnoc-mport-clk + - const: mi2s-bit-clk0 + - const: mi2s-bit-clk1 + required: + - iommus + - power-domains + +examples: + - | + #include <dt-bindings/sound/sc7180-lpass.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + lpass@62f00000 { + compatible = "qcom,sc7180-lpass-cpu"; + + reg = <0 0x62f00000 0 0x29000>; + + iommus = <&apps_smmu 0x1020 0>; + power-domains = <&lpass_hm 0>; + + clocks = <&gcc 131>, + <&lpasscorecc 6>, + <&lpasscorecc 7>, + <&lpasscorecc 10>, + <&lpasscorecc 8>, + <&lpasscorecc 9>; + + clock-names = "pcnoc-sway-clk", "audio-core", + "mclk0", "pcnoc-mport-clk", + "mi2s-bit-clk0", "mi2s-bit-clk1"; + + interrupts = <0 160 1>;
Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml line 174
Quoted 10 lines
Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml new file +10
-0+ + #sound-dai-cells = <1>; + + #address-cells = <1>; + #size-cells = <0>; + /* Optional to set different MI2S SD lines */ + mi2s-primary@0 { + reg = <MI2S_PRIMARY>; + qcom,playback-sd-lines = <1>; + qcom,capture-sd-lines = <0>;
These 2 aren't documented.
Rob
Hello Mark,
Other than patch 12, there is no comment on other patches from anyone as of now.
[PATCH v5 12/12] dt-bindings: sound: lpass-cpu: Move to yaml format
I will plan to post patch12 only with comments addressed if other changes does not have any comment. Please let me know your inputs.
Thanks,
Rohit
Quoted 43 lines · Rohit kumar
This patch chain add audio support for SC7180 soc by doing the required modification in existing common lpass-cpu/lpass-platform driver. This also fixes some concurrency issue.
This patch series is already tested by Srinivas on Dragon Board 410c. Changes since v4:
- Updated compatible string for sc7180 lpass cpu as suggested by Rob
- Addressed comments by Rob in yaml Documentation.Ajit Pandey (4):
ASoC: qcom: Add common array to initialize soc based core clocks
ASoC: qcom: lpass-platform: Replacecard->devwithcomponent->dev
include: dt-bindings: sound: Add sc7180-lpass bindings header
ASoC: qcom: lpass-sc7180: Add platform driver for lpass audioRohit kumar (8):
ASoC: qcom: lpass-cpu: Move ahbix clk to platform specific function
ASoC: qcom: lpass-platform: fix memory leak
ASoC: qcom: lpass: Useregmap_fieldfor i2sctl and dmactl registers
ASoC: qcom: lpass-cpu: fix concurrency issue
dt-bindings: sound: lpass-cpu: Add sc7180 lpass cpu node
ASoC: qcom: lpass-cpu: Useplatform_get_resource
ASoC: qcom: lpass-platform: Useplatform_get_irq
dt-bindings: sound: lpass-cpu: Move to yaml format.../devicetree/bindings/sound/qcom,lpass-cpu.txt | 79 -------- .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 179 +++++++++++++++++ include/dt-bindings/sound/sc7180-lpass.h | 10 + sound/soc/qcom/Kconfig | 5 + sound/soc/qcom/Makefile | 2 + sound/soc/qcom/lpass-apq8016.c | 86 ++++++-- sound/soc/qcom/lpass-cpu.c | 204 ++++++++++--------- sound/soc/qcom/lpass-ipq806x.c | 67 +++++++ sound/soc/qcom/lpass-lpaif-reg.h | 157 ++++++++------- sound/soc/qcom/lpass-platform.c | 155 +++++++++++---- sound/soc/qcom/lpass-sc7180.c | 216 +++++++++++++++++++++ sound/soc/qcom/lpass.h | 63 +++++- 12 files changed, 924 insertions(+), 299 deletions(-)delete mode 100644
Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txtcreate mode 100644Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yamlcreate mode 100644include/dt-bindings/sound/sc7180-lpass.hcreate mode 100644sound/soc/qcom/lpass-sc7180.c
Signature · 2 lines
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member of the Code Aurora Forum, hosted by the Linux Foundation.
Re: [PATCH v5 01/12] ASoC: qcom: Add common array to initialize soc based core clocks
In reply to Rohit kumarHello Mark,
Do you see any concern with patches (1-11).
As of now, there is comment only in patch 12 from Rob which I am planning to update once other patches are merged. Can you please review and let me know if anything is missing.
Thanks,
Rohit
Quoted 115 lines · Rohit kumar
From: Ajit Pandey <[email protected]>
LPASS variants have their own soc specific clocks that needs to be enabled for MI2S audio support. Added a common variable in drvdata to initialize such clocks using bulk clk api. Such clock names is defined in variants specific data and needs to fetched during init.
Signed-off-by Ajit Pandey <[email protected]>Signed-off-by Rohit kumar <[email protected]>Reviewed-by Srinivas Kandagatla <[email protected]>--- sound/soc/qcom/lpass-apq8016.c | 39 +++++++++++++++++++-------------------- sound/soc/qcom/lpass.h | 10 +++++++--- 2 files changed, 26 insertions(+), 23 deletions(-)sound/soc/qcom/lpass-apq8016.c +19
-20@@ -161,32 +161,27 @@ static int apq8016_lpass_free_dma_channel(struct lpass_data *drvdata, int chan)static int apq8016_lpass_init (struct platform_device *pdev) {struct lpass_data *drvdata =platform_get_drvdata (pdev); +struct lpass_variant *variant = drvdata->variant;struct device *dev = &pdev->dev; -int ret; +int ret, i; - drvdata->pcnoc_mport_clk =devm_clk_get (dev,"pcnoc-mport-clk" ); -if (IS_ERR (drvdata->pcnoc_mport_clk)) { -dev_err (dev,"error getting pcnoc-mport-clk: %ld\n" , -PTR_ERR (drvdata->pcnoc_mport_clk)); -return PTR_ERR (drvdata->pcnoc_mport_clk); - } - ret =clk_prepare_enable (drvdata->pcnoc_mport_clk); + drvdata->clks =devm_kcalloc (dev, variant->num_clks, +sizeof (*drvdata->clks),GFP_KERNEL ); + drvdata->num_clks = variant->num_clks; + +for (i =0 ; i < drvdata->num_clks; i++) + drvdata->clks[i].id = variant->clk_name[i]; + + ret =devm_clk_bulk_get (dev, drvdata->num_clks, drvdata->clks);if (ret) { -dev_err (dev,"Error enabling pcnoc-mport-clk: %d\n" , ret); +dev_err (dev,"Failed to get clocks %d\n" , ret);return ret; } - drvdata->pcnoc_sway_clk =devm_clk_get (dev,"pcnoc-sway-clk" ); -if (IS_ERR (drvdata->pcnoc_sway_clk)) { -dev_err (dev,"error getting pcnoc-sway-clk: %ld\n" , -PTR_ERR (drvdata->pcnoc_sway_clk)); -return PTR_ERR (drvdata->pcnoc_sway_clk); - } - - ret =clk_prepare_enable (drvdata->pcnoc_sway_clk); + ret =clk_bulk_prepare_enable (drvdata->num_clks, drvdata->clks);if (ret) { -dev_err (dev,"Error enabling pcnoc_sway_clk: %d\n" , ret); +dev_err (dev,"apq8016 clk_enable failed\n" );return ret; }@@ -197,8 +192,7 @@ static int apq8016_lpass_exit(struct platform_device *pdev) {struct lpass_data *drvdata =platform_get_drvdata (pdev); -clk_disable_unprepare (drvdata->pcnoc_mport_clk); -clk_disable_unprepare (drvdata->pcnoc_sway_clk); +clk_bulk_disable_unprepare (drvdata->num_clks, drvdata->clks);return 0 ; }@@ -219,6 +213,11 @@ static struct lpass_variant apq8016_data = { .wrdma_reg_stride = 0x1000, .wrdma_channel_start = 5, .wrdma_channels = 2, + .clk_name = (const char *[]) { +"pcnoc-mport-clk" , +"pcnoc-sway-clk" , + }, + .num_clks = 2, .dai_driver = apq8016_lpass_cpu_dai_driver, .num_dai = ARRAY_SIZE(apq8016_lpass_cpu_dai_driver), .dai_osr_clk_names = (const char *[]) {sound/soc/qcom/lpass.h +7
-3@@ -51,9 +51,9 @@ struct lpass_data {/* used it for handling interrupt per dma channel */ struct snd_pcm_substream *substream[LPASS_MAX_DMA_CHANNELS ]; -/* 8016 specific */ -struct clk *pcnoc_mport_clk; -struct clk *pcnoc_sway_clk; +/* SOC specific clock list */ +struct clk_bulk_data *clks; +int num_clks; };@@ -89,6 +89,10 @@ struct lpass_variant {int num_dai;const char *const *dai_osr_clk_names;const char *const *dai_bit_clk_names; + +/* SOC specific clocks configuration */ +const char **clk_name; +int num_clks; };/* register the platform driver from the CPU DAI driver */
Signature · 2 lines
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member of the Code Aurora Forum, hosted by the Linux Foundation.
Mark Brown
maintainerRe: [PATCH v5 01/12] ASoC: qcom: Add common array to initialize soc based core clocks
Quoted 4 lines · Rohit Kumar
Do you see any concern with patches (1-11).
As of now, there is comment only in patch 12 from Rob which I am planning to update once other patches are merged. Can you please review and let me know if anything is missing.
Please just post the fixed series instead of sending me a stream of pings, it must be taking you more time to do this than it would to just send the fix. I'm not going to apply your patches during the merge window, they are not bug fixes and sending me content free pings just makes me delay the review.