PCI IDs commented out for 82801I (ICH9 Mobile and non-mobile)?
Hello folks,
I was looking at why I can't load the Intel RNG driver (or why it doesn't load automatically) and it just so happens I have both the mobile and non-mobile ICH9 chipset. Looking at the driver I noticed:
/* BAM, CAM, DBM, FBM, GxM
{ PCI_DEVICE(0x8086, 0x2448) }, *//* BA, CA, DB, Ex, 6300, Fx, 631x/632x, Gx
{ PCI_DEVICE(0x8086, 0x244e) }, */IDs from both machines:
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92)
I saw a thread from 2006 explaining the 50% chance there's no RNG (but these days all modern chipsets should have an RNG) and I know this chipset I have does have an RNG so I'd like to use the HW random generator vs software.
Do we need to revisit this? Even if I try to force it to load it still fails:
# modprobe intel_rng no_fwh_detect=-1 or =1 modprobe: ERROR: could not insert 'intel_rng': No such device
Thanks,
Shawn
Quoted 11 lines · Shawn Starr
Hello folks,
I was looking at why I can't load the Intel RNG driver (or why it doesn't load automatically) and it just so happens I have both the mobile and non-mobile ICH9 chipset. Looking at the driver I noticed:
/* BAM, CAM, DBM, FBM, GxM
{ PCI_DEVICE(0x8086, 0x2448) }, *//* BA, CA, DB, Ex, 6300, Fx, 631x/632x, Gx
{ PCI_DEVICE(0x8086, 0x244e) }, */
Quoted 8 lines
IDs from both machines:
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92)
I saw a thread from 2006 explaining the 50% chance there's no RNG (but these days all modern chipsets should have an RNG) and I know this chipset I have does have an RNG so I'd like to use the HW random generator vs software.
Do you know that for sure?
Quoted 5 lines
Do we need to revisit this? Even if I try to force it to load it still fails:
# modprobe intel_rng no_fwh_detect=-1 or =1 modprobe: ERROR: could not insert 'intel_rng': No such device
The Intel RNG of that era lived in the Firmware Hub (a.k.a. BIOS flash) rather than in the chipset proper... so even with the right chipset you might or might not actually have the the RNG. The code really detects the presence of a chipset which could support a FWH flash part.
Jan, in c24c95a085c6b52c11c2f5afecc38b0ca143cdae you comment out a number of PCI IDs. Was that intentional?
-hpa
Signature · 2 lines
H. Peter Anvin, Intel Open Source Technology Center I work for Intel. I don't speak on their behalf.
Quoted 22 lines
Quoted 1 line
Quoted 1 line · H. Peter Anvin
Quoted 3 lines · Shawn Starr
Hello folks,
I was looking at why I can't load the Intel RNG driver (or why it doesn't
load automatically) and
Quoted 1 line
it just so happens I have both the mobile and non-mobile ICH9 chipset.
Looking at the driver I noticed:
Quoted 10 lines
/* BAM, CAM, DBM, FBM, GxM
{ PCI_DEVICE(0x8086, 0x2448) }, *//* BA, CA, DB, Ex, 6300, Fx, 631x/632x, Gx
{ PCI_DEVICE(0x8086, 0x244e) }, */IDs from both machines:
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 93)
Quoted 1 line
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e]
(rev 92)
Quoted 1 line
Quoted 7 lines
Quoted 1 line
I saw a thread from 2006 explaining the 50% chance there's no RNG (but these
days all modern chipsets should have an RNG) and I know
Quoted 1 line
this chipset I have does have an RNG so I'd like to use the HW random
generator vs software.
Quoted 1 line
Do you know that for sure?
I haven't seen _any_ half way recent system having this old style FWH.
Quoted 6 lines
Quoted 5 lines
Do we need to revisit this? Even if I try to force it to load it still fails:
# modprobe intel_rng no_fwh_detect=-1 or =1 modprobe: ERROR: could not insert 'intel_rng': No such device
Quoted 7 lines
The Intel RNG of that era lived in the Firmware Hub (a.k.a. BIOS flash) rather than in the chipset proper... so even with the right chipset you might or might not actually have the the RNG. The code really detects the presence of a chipset which could support a FWH flash part.
Jan, in
c24c95a085c6b52c11c2f5afecc38b0ca143cdaeyou comment out a number of PCI IDs. Was that intentional?
Yes, as explained in the description (albeit, reading it now, 6.5 years later, again, I admit it could have been written in better ways): Before that change, the selection of which particular device from a chipset was chose was more or less random. But with the new code now actually accessing the device, it has to be the LPC one. And the list of devices stops at ICH7 - that was, afaict now, the newest one in existence back then. Therefore, if there really are newer chipsets with FWH, the code would need auditing for correctness when intending to add further PCI IDs.
Jan
Quoted 16 lines · Shawn Starr
Hello folks,
I was looking at why I can't load the Intel RNG driver (or why it doesn't load automatically) and it just so happens I have both the mobile and non-mobile ICH9 chipset. Looking at the driver I noticed:
/* BAM, CAM, DBM, FBM, GxM
{ PCI_DEVICE(0x8086, 0x2448) }, *//* BA, CA, DB, Ex, 6300, Fx, 631x/632x, Gx
{ PCI_DEVICE(0x8086, 0x244e) }, */IDs from both machines:
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92)
Quoted 7 lines
I saw a thread from 2006 explaining the 50% chance there's no RNG (but these days all modern chipsets should have an RNG) and I know this chipset I have does have an RNG so I'd like to use the HW random generator vs software.
Do we need to revisit this? Even if I try to force it to load it still fails:
# modprobe intel_rng no_fwh_detect=-1 or =1 modprobe: ERROR: could not insert 'intel_rng': No such device
The module verifies that you have one of the PCI devices in that table, so you need to modify it to get the driver to load:
static int __init mod_init(void)
{
int err = -ENODEV;
int i;
struct pci_dev *dev = NULL;
void __iomem *mem = mem;
u8 hw_status;
struct intel_rng_hw *intel_rng_hw;
for (i = 0; !dev && pci_tbl[i].vendor; ++i)
dev = pci_get_device(pci_tbl[i].vendor, pci_tbl[i].device,
NULL);
if (!dev)
goto out; /* Device not found. */Bjørn