serial: 8250_pci: Add WCH384_8S 8 port serial device
PATCH 1/1 serial: 8250_pci: Add WCH384_8S 8 port serial device
Add PCI id for WCH384_8S 8 port PCI-E serial card. because this card has so many ports, you may have to check these two options before use it:
CONFIG_SERIAL_8250_RUNTIME_UARTS CONFIG_SERIAL_8250_NR_UARTS
Signed-off-by Du Huanpeng <[email protected]>
--- drivers/tty/serial/8250/8250_pci.c | 56 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+)
drivers/tty/serial/8250/8250_pci.c +56 -0
@@ -1776,6 +1776,39 @@ pci_wch_ch38x_setup(struct serial_private *priv,return pci_default_setup (priv, board, port, idx); } + +#define CH384_XINT_ENABLE_REG 0xEB +#define CH384_XINT_ENABLE_BIT 0x02 + +static int pci_wch_ch38x_init (struct pci_dev *dev) +{ +int max_port; +unsigned long iobase; + + +switch (dev->device) { +case 0x3853 :/* 8 ports */ + max_port =8 ; +break ; +default : +return -EINVAL ; + } + + iobase =pci_resource_start (dev,0 ); +outb (CH384_XINT_ENABLE_BIT , iobase +CH384_XINT_ENABLE_REG ); + +return max_port; +} + +static void pci_wch_ch38x_exit (struct pci_dev *dev) +{ +unsigned long iobase; + + iobase =pci_resource_start (dev,0 ); +outb (0x0 , iobase +CH384_XINT_ENABLE_REG ); +} + + static int pci_sunix_setup(struct serial_private *priv, const struct pciserial_board *board,
@@ -1867,6 +1900,7 @@ pci_moxa_setup(struct serial_private *priv,#define PCIE_VENDOR_ID_WCH 0x1c00#define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250#define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470 +#define PCIE_DEVICE_ID_WCH_CH384_8S 0x3853#define PCIE_DEVICE_ID_WCH_CH382_2S 0x3253#define PCI_VENDOR_ID_PERICOM 0x12D8
@@ -2648,6 +2682,16 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = pci_wch_ch38x_setup, }, +/* WCH CH384 8S card (16850 clone) */ + { + .vendor = PCIE_VENDOR_ID_WCH, + .device = PCIE_DEVICE_ID_WCH_CH384_8S, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_wch_ch38x_init, + .exit = pci_wch_ch38x_exit, + .setup = pci_wch_ch38x_setup, + },/* * ASIX devices with FIFO bug */
@@ -2919,6 +2963,7 @@ enum pci_board_num_t { pbn_fintek_F81512A, pbn_wch382_2, pbn_wch384_4, + pbn_wch384_8, pbn_pericom_PI7C9X7951, pbn_pericom_PI7C9X7952, pbn_pericom_PI7C9X7954,
@@ -3656,6 +3701,13 @@ static struct pciserial_board pci_boards[] = { .uart_offset = 8, .first_offset = 0xC0, }, + [pbn_wch384_8] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + .first_offset = 0x00, + },/* * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART */
@@ -5572,6 +5624,10 @@ static const struct pci_device_id serial_pci_tbl[] = {PCI_ANY_ID ,PCI_ANY_ID , 0, 0, pbn_wch384_4 }, + { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_8S, +PCI_ANY_ID ,PCI_ANY_ID , + 0, 0, pbn_wch384_8 }, +/* Fintek PCI serial cards */ { PCI_DEVICE(0x1c29, 0x1104), .driver_data = pbn_fintek_4 }, { PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 },
Signature · 1 line
2.7.4