Skip to contentSkip to conversation

scsi: alua: fix the race between alua_bus_detach and alua_rtpg

PATCH In review Jitendra Khasdev 4 participants 12 messages Sep 15, 2020 – Oct 29, 2020 SCSI

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 scsi: alua: fix the race between alua_bus_detach and alua_rtpg

This is patch to fix the race occurs between bus detach and alua_rtpg.

It fluses the all pending workqueue in bus detach handler, so it can avoid race between alua_bus_detach and alua_rtpg.

Here is call trace where race got detected.

multipathd call stack:
[exception RIP: native_queued_spin_lock_slowpath+100] --- <NMI exception stack> --- native_queued_spin_lock_slowpath at ffffffff89307f54 queued_spin_lock_slowpath at ffffffff89307c18 _raw_spin_lock_irq at ffffffff89bd797b alua_bus_detach at ffffffff8984dcc8 scsi_dh_release_device at ffffffff8984b6f2 scsi_device_dev_release_usercontext at ffffffff89846edf execute_in_process_context at ffffffff892c3e60 scsi_device_dev_release at ffffffff8984637c device_release at ffffffff89800fbc kobject_cleanup at ffffffff89bb1196 kobject_put at ffffffff89bb12ea
put_device at ffffffff89801283
scsi_device_put at ffffffff89838d5b scsi_disk_put at ffffffffc051f650 [sd_mod] sd_release at ffffffffc051f8a2 [sd_mod] __blkdev_put at ffffffff8952c79e
blkdev_put at ffffffff8952c80c
blkdev_close at ffffffff8952c8b5
__fput at ffffffff894e55e6
____fput at ffffffff894e57ee
task_work_run at ffffffff892c94dc exit_to_usermode_loop at ffffffff89204b12 do_syscall_64 at ffffffff892044da entry_SYSCALL_64_after_hwframe at ffffffff89c001b8

kworker:
[exception RIP: alua_rtpg+2003]
account_entity_dequeue at ffffffff892e42c1
alua_rtpg_work at ffffffff8984f097
process_one_work at ffffffff892c4c29
worker_thread at ffffffff892c5a4f
kthread at ffffffff892cb135
ret_from_fork at ffffffff89c00354

---
 drivers/scsi/device_handler/scsi_dh_alua.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/scsi/device_handler/scsi_dh_alua.c +3 -0
index f32da0c..024a752 100644
@@ -1144,6 +1144,9 @@ static void alua_bus_detach(struct scsi_device *sdev)
 	struct alua_dh_data *h = sdev->handler_data;
 	struct alua_port_group *pg;
 
+	sdev_printk(KERN_INFO, sdev, "%s: flushing workqueues\n", ALUA_DH_NAME);
+	flush_workqueue(kaluad_wq);
+
 	spin_lock(&h->pg_lock);
 	pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
 	rcu_assign_pointer(h->pg, NULL);
Signature · 1 line
1.8.3.1
#1 lore raw

Hello Jitendra,

It seems that we are in the same place trying to fix the same thing for what is likely our same shared customer. Do you want to try to incorporate anything from our fix from PURE? Like maybe remove the BUG_ON lines from alua_rtpg if you are sure that the race is eliminated with your patch?

See:
https://marc.info/?l=linux-scsi&m=159984129611701&w=2
https://marc.info/?l=linux-scsi&m=159983931810954&w=2
https://marc.info/?l=linux-scsi&m=159971849210795&w=2

Thanks,
Brian

Brian Bunker
SW Eng
[email protected]

Quoted 68 lines · Jitendra Khasdev

This is patch to fix the race occurs between bus detach and alua_rtpg.

It fluses the all pending workqueue in bus detach handler, so it can avoid race between alua_bus_detach and alua_rtpg.

Here is call trace where race got detected.

multipathd call stack:
[exception RIP: native_queued_spin_lock_slowpath+100] --- <NMI exception stack> --- native_queued_spin_lock_slowpath at ffffffff89307f54 queued_spin_lock_slowpath at ffffffff89307c18 _raw_spin_lock_irq at ffffffff89bd797b alua_bus_detach at ffffffff8984dcc8 scsi_dh_release_device at ffffffff8984b6f2 scsi_device_dev_release_usercontext at ffffffff89846edf execute_in_process_context at ffffffff892c3e60 scsi_device_dev_release at ffffffff8984637c device_release at ffffffff89800fbc kobject_cleanup at ffffffff89bb1196 kobject_put at ffffffff89bb12ea
put_device at ffffffff89801283
scsi_device_put at ffffffff89838d5b scsi_disk_put at ffffffffc051f650 [sd_mod] sd_release at ffffffffc051f8a2 [sd_mod] __blkdev_put at ffffffff8952c79e
blkdev_put at ffffffff8952c80c
blkdev_close at ffffffff8952c8b5
__fput at ffffffff894e55e6
____fput at ffffffff894e57ee
task_work_run at ffffffff892c94dc exit_to_usermode_loop at ffffffff89204b12 do_syscall_64 at ffffffff892044da entry_SYSCALL_64_after_hwframe at ffffffff89c001b8

kworker:
[exception RIP: alua_rtpg+2003]
account_entity_dequeue at ffffffff892e42c1
alua_rtpg_work at ffffffff8984f097
process_one_work at ffffffff892c4c29
worker_thread at ffffffff892c5a4f
kthread at ffffffff892cb135
ret_from_fork at ffffffff89c00354

---
drivers/scsi/device_handler/scsi_dh_alua.c | 3 +++

1 file changed, 3 insertions(+)
drivers/scsi/device_handler/scsi_dh_alua.c +3 -0
index f32da0c..024a752 100644
@@ -1144,6 +1144,9 @@ static void alua_bus_detach(struct scsi_device *sdev)
 	struct alua_dh_data *h = sdev->handler_data;
 	struct alua_port_group *pg;
 
+	sdev_printk(KERN_INFO, sdev, "%s: flushing workqueues\n", ALUA_DH_NAME);
+	flush_workqueue(kaluad_wq);
+
 	spin_lock(&h->pg_lock);
 	pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
 	rcu_assign_pointer(h->pg, NULL);
Signature · 1 line
1.8.3.1
#2 lore raw

Hi Brian,

Quoted 77 lines · Brian Bunker

Hello Jitendra,

It seems that we are in the same place trying to fix the same thing for what is likely our same shared customer. Do you want to try to incorporate anything from our fix from PURE? Like maybe remove the BUG_ON lines from alua_rtpg if you are sure that the race is eliminated with your patch?

See:
https://urldefense.com/v3/__https://marc.info/?l=linux-scsi&m=159984129611701&w=2__;!!GqivPVa7Brio!I4yOcJ5ukf2JyZxomXPkZdfh8vQTLSzBjHiZhWwhsSXyBgPCMqrS0xp0i3fa-5GELI3NNw$
https://urldefense.com/v3/__https://marc.info/?l=linux-scsi&m=159983931810954&w=2__;!!GqivPVa7Brio!I4yOcJ5ukf2JyZxomXPkZdfh8vQTLSzBjHiZhWwhsSXyBgPCMqrS0xp0i3fa-5EMk1YDDA$
https://urldefense.com/v3/__https://marc.info/?l=linux-scsi&m=159971849210795&w=2__;!!GqivPVa7Brio!I4yOcJ5ukf2JyZxomXPkZdfh8vQTLSzBjHiZhWwhsSXyBgPCMqrS0xp0i3fa-5H7zlg1Nw$

Thanks,
Brian

Brian Bunker
SW Eng
[email protected]

Quoted 59 lines · Jitendra Khasdev

This is patch to fix the race occurs between bus detach and alua_rtpg.

It fluses the all pending workqueue in bus detach handler, so it can avoid race between alua_bus_detach and alua_rtpg.

Here is call trace where race got detected.

multipathd call stack:
[exception RIP: native_queued_spin_lock_slowpath+100] --- <NMI exception stack> --- native_queued_spin_lock_slowpath at ffffffff89307f54 queued_spin_lock_slowpath at ffffffff89307c18 _raw_spin_lock_irq at ffffffff89bd797b alua_bus_detach at ffffffff8984dcc8 scsi_dh_release_device at ffffffff8984b6f2 scsi_device_dev_release_usercontext at ffffffff89846edf execute_in_process_context at ffffffff892c3e60 scsi_device_dev_release at ffffffff8984637c device_release at ffffffff89800fbc kobject_cleanup at ffffffff89bb1196 kobject_put at ffffffff89bb12ea
put_device at ffffffff89801283
scsi_device_put at ffffffff89838d5b scsi_disk_put at ffffffffc051f650 [sd_mod] sd_release at ffffffffc051f8a2 [sd_mod] __blkdev_put at ffffffff8952c79e
blkdev_put at ffffffff8952c80c
blkdev_close at ffffffff8952c8b5
__fput at ffffffff894e55e6
____fput at ffffffff894e57ee
task_work_run at ffffffff892c94dc exit_to_usermode_loop at ffffffff89204b12 do_syscall_64 at ffffffff892044da entry_SYSCALL_64_after_hwframe at ffffffff89c001b8

kworker:
[exception RIP: alua_rtpg+2003]
account_entity_dequeue at ffffffff892e42c1
alua_rtpg_work at ffffffff8984f097
process_one_work at ffffffff892c4c29
worker_thread at ffffffff892c5a4f
kthread at ffffffff892cb135
ret_from_fork at ffffffff89c00354

---
drivers/scsi/device_handler/scsi_dh_alua.c | 3 +++

1 file changed, 3 insertions(+)
drivers/scsi/device_handler/scsi_dh_alua.c +0 -0
index f32da0c..024a752 100644
@@ -1144,6 +1144,9 @@ static void alua_bus_detach(struct scsi_device *sdev)
 	struct alua_dh_data *h = sdev->handler_data;
 	struct alua_port_group *pg;
 
Quoted 10 lines
Quoted 9 lines
drivers/scsi/device_handler/scsi_dh_alua.c +3 -0
+	sdev_printk(KERN_INFO, sdev, "%s: flushing workqueues\n", ALUA_DH_NAME);
+	flush_workqueue(kaluad_wq);
+
 	spin_lock(&h->pg_lock);
 	pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
 	rcu_assign_pointer(h->pg, NULL);
Signature · 1 line
1.8.3.1

Yes, looks we are fixing same problem. I looked into your patch, and thought removing BUG_ON could be last resort. Would you mind trying out my patch since it is reproducing at your site, because it looks me more cleaner way of doing it.

---
Jitendra

#3 lore raw
In reply to Jitendra Khasdev
Quoted 54 lines · Jitendra Khasdev

This is patch to fix the race occurs between bus detach and alua_rtpg.

It fluses the all pending workqueue in bus detach handler, so it can avoid race between alua_bus_detach and alua_rtpg.

Here is call trace where race got detected.

multipathd call stack:
[exception RIP: native_queued_spin_lock_slowpath+100] --- <NMI exception stack> --- native_queued_spin_lock_slowpath at ffffffff89307f54 queued_spin_lock_slowpath at ffffffff89307c18 _raw_spin_lock_irq at ffffffff89bd797b alua_bus_detach at ffffffff8984dcc8 scsi_dh_release_device at ffffffff8984b6f2 scsi_device_dev_release_usercontext at ffffffff89846edf execute_in_process_context at ffffffff892c3e60 scsi_device_dev_release at ffffffff8984637c device_release at ffffffff89800fbc kobject_cleanup at ffffffff89bb1196 kobject_put at ffffffff89bb12ea
put_device at ffffffff89801283
scsi_device_put at ffffffff89838d5b scsi_disk_put at ffffffffc051f650 [sd_mod] sd_release at ffffffffc051f8a2 [sd_mod] __blkdev_put at ffffffff8952c79e
blkdev_put at ffffffff8952c80c
blkdev_close at ffffffff8952c8b5
__fput at ffffffff894e55e6
____fput at ffffffff894e57ee
task_work_run at ffffffff892c94dc exit_to_usermode_loop at ffffffff89204b12 do_syscall_64 at ffffffff892044da entry_SYSCALL_64_after_hwframe at ffffffff89c001b8

kworker:
[exception RIP: alua_rtpg+2003]
account_entity_dequeue at ffffffff892e42c1
alua_rtpg_work at ffffffff8984f097
process_one_work at ffffffff892c4c29
worker_thread at ffffffff892c5a4f
kthread at ffffffff892cb135
ret_from_fork at ffffffff89c00354

---
 drivers/scsi/device_handler/scsi_dh_alua.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/scsi/device_handler/scsi_dh_alua.c +0 -0
index f32da0c..024a752 100644

drivers/scsi/device_handler/scsi_dh_alua.c static void alua_bus_detach(struct scsi_device *sdev) · line 1152

Quoted 9 lines
drivers/scsi/device_handler/scsi_dh_alua.c +3 -0
@@ -1144,6 +1144,9 @@ static void alua_bus_detach(struct scsi_device *sdev)
 	struct alua_dh_data *h = sdev->handler_data;
 	struct alua_port_group *pg;
 
+	sdev_printk(KERN_INFO, sdev, "%s: flushing workqueues\n", ALUA_DH_NAME);
+	flush_workqueue(kaluad_wq);
+
 	spin_lock(&h->pg_lock);
 	pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
 	rcu_assign_pointer(h->pg, NULL);

I'm not sure this is the best solution. The current code references h->sdev when the dh_list is traversed. So it needs to remain valid. Fixing it by flushing the workqueue to avoid the list traversal code running leaves open the possibility that future code alterations may expose this problem again.

-Ewan

#4 lore raw
Quoted 71 lines · Ewan D. Milne
Quoted 54 lines · Jitendra Khasdev

This is patch to fix the race occurs between bus detach and alua_rtpg.

It fluses the all pending workqueue in bus detach handler, so it can avoid race between alua_bus_detach and alua_rtpg.

Here is call trace where race got detected.

multipathd call stack:
[exception RIP: native_queued_spin_lock_slowpath+100] --- <NMI exception stack> --- native_queued_spin_lock_slowpath at ffffffff89307f54 queued_spin_lock_slowpath at ffffffff89307c18 _raw_spin_lock_irq at ffffffff89bd797b alua_bus_detach at ffffffff8984dcc8 scsi_dh_release_device at ffffffff8984b6f2 scsi_device_dev_release_usercontext at ffffffff89846edf execute_in_process_context at ffffffff892c3e60 scsi_device_dev_release at ffffffff8984637c device_release at ffffffff89800fbc kobject_cleanup at ffffffff89bb1196 kobject_put at ffffffff89bb12ea
put_device at ffffffff89801283
scsi_device_put at ffffffff89838d5b scsi_disk_put at ffffffffc051f650 [sd_mod] sd_release at ffffffffc051f8a2 [sd_mod] __blkdev_put at ffffffff8952c79e
blkdev_put at ffffffff8952c80c
blkdev_close at ffffffff8952c8b5
__fput at ffffffff894e55e6
____fput at ffffffff894e57ee
task_work_run at ffffffff892c94dc exit_to_usermode_loop at ffffffff89204b12 do_syscall_64 at ffffffff892044da entry_SYSCALL_64_after_hwframe at ffffffff89c001b8

kworker:
[exception RIP: alua_rtpg+2003]
account_entity_dequeue at ffffffff892e42c1
alua_rtpg_work at ffffffff8984f097
process_one_work at ffffffff892c4c29
worker_thread at ffffffff892c5a4f
kthread at ffffffff892cb135
ret_from_fork at ffffffff89c00354

---
 drivers/scsi/device_handler/scsi_dh_alua.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/scsi/device_handler/scsi_dh_alua.c +0 -0
index f32da0c..024a752 100644

drivers/scsi/device_handler/scsi_dh_alua.c static void alua_bus_detach(struct scsi_device *sdev) · line 1152

Quoted 9 lines
drivers/scsi/device_handler/scsi_dh_alua.c +3 -0
@@ -1144,6 +1144,9 @@ static void alua_bus_detach(struct scsi_device *sdev)
 	struct alua_dh_data *h = sdev->handler_data;
 	struct alua_port_group *pg;
 
+	sdev_printk(KERN_INFO, sdev, "%s: flushing workqueues\n", ALUA_DH_NAME);
+	flush_workqueue(kaluad_wq);
+
 	spin_lock(&h->pg_lock);
 	pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
 	rcu_assign_pointer(h->pg, NULL);

I'm not sure this is the best solution. The current code references h->sdev when the dh_list is traversed. So it needs to remain valid. Fixing it by flushing the workqueue to avoid the list traversal code running leaves open the possibility that future code alterations may expose this problem again.

Quoted 3 lines

-Ewan

I see your point, but as we are in detach handler and this code path only execute when device is being detached. So, before detaching, flush work-queue will take care of any current code references h->sdev where dh_list is being traversed.

IMO, I do not think it would create any problem for future code alterations. Or may be I am missing something over here, what could be possible scenario for that?

---
Jitendra

#5 lore raw
Quoted 74 lines · On 9/18/20 5:49 AM, [email protected] wrote:
Quoted 71 lines · Ewan D. Milne
Quoted 54 lines · Jitendra Khasdev

This is patch to fix the race occurs between bus detach and alua_rtpg.

It fluses the all pending workqueue in bus detach handler, so it can avoid race between alua_bus_detach and alua_rtpg.

Here is call trace where race got detected.

multipathd call stack:
[exception RIP: native_queued_spin_lock_slowpath+100] --- <NMI exception stack> --- native_queued_spin_lock_slowpath at ffffffff89307f54 queued_spin_lock_slowpath at ffffffff89307c18 _raw_spin_lock_irq at ffffffff89bd797b alua_bus_detach at ffffffff8984dcc8 scsi_dh_release_device at ffffffff8984b6f2 scsi_device_dev_release_usercontext at ffffffff89846edf execute_in_process_context at ffffffff892c3e60 scsi_device_dev_release at ffffffff8984637c device_release at ffffffff89800fbc kobject_cleanup at ffffffff89bb1196 kobject_put at ffffffff89bb12ea
put_device at ffffffff89801283
scsi_device_put at ffffffff89838d5b scsi_disk_put at ffffffffc051f650 [sd_mod] sd_release at ffffffffc051f8a2 [sd_mod] __blkdev_put at ffffffff8952c79e
blkdev_put at ffffffff8952c80c
blkdev_close at ffffffff8952c8b5
__fput at ffffffff894e55e6
____fput at ffffffff894e57ee
task_work_run at ffffffff892c94dc exit_to_usermode_loop at ffffffff89204b12 do_syscall_64 at ffffffff892044da entry_SYSCALL_64_after_hwframe at ffffffff89c001b8

kworker:
[exception RIP: alua_rtpg+2003]
account_entity_dequeue at ffffffff892e42c1
alua_rtpg_work at ffffffff8984f097
process_one_work at ffffffff892c4c29
worker_thread at ffffffff892c5a4f
kthread at ffffffff892cb135
ret_from_fork at ffffffff89c00354

---
  drivers/scsi/device_handler/scsi_dh_alua.c | 3 +++
  1 file changed, 3 insertions(+)
drivers/scsi/device_handler/scsi_dh_alua.c +0 -0
index f32da0c..024a752 100644

drivers/scsi/device_handler/scsi_dh_alua.c static void alua_bus_detach(struct scsi_device *sdev) · line 1152

Quoted 9 lines
drivers/scsi/device_handler/scsi_dh_alua.c +3 -0
@@ -1144,6 +1144,9 @@ static void alua_bus_detach(struct scsi_device *sdev)
  	struct alua_dh_data *h = sdev->handler_data;
  	struct alua_port_group *pg;
 
+	sdev_printk(KERN_INFO, sdev, "%s: flushing workqueues\n", ALUA_DH_NAME);
+	flush_workqueue(kaluad_wq);
+
  	spin_lock(&h->pg_lock);
  	pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
  	rcu_assign_pointer(h->pg, NULL);

I'm not sure this is the best solution. The current code references h->sdev when the dh_list is traversed. So it needs to remain valid. Fixing it by flushing the workqueue to avoid the list traversal code running leaves open the possibility that future code alterations may expose this problem again.

Quoted 9 lines
Quoted 3 lines

-Ewan

I see your point, but as we are in detach handler and this code path only execute when device is being detached. So, before detaching, flush work-queue will take care of any current code references h->sdev where dh_list is being traversed.

Flushing the workqueue is a bit of an overkill, seeing that we know exactly which workqueue element we're waiting for.

Quoted 4 lines

IMO, I do not think it would create any problem for future code alterations. Or may be I am missing something over here, what could be possible scenario for that?

Problem is more that I'd like to understand where exactly the race condition is. Can you figure out which spinlock is triggering in your stack trace?

Cheers,

Hannes

Signature · 4 lines
Dr. Hannes Reinecke                Kernel Storage Architect
[email protected]                              +49 911 74053 688
SUSE Software Solutions GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), Geschäftsführer: Felix Imendörffer
#6 lore raw
Quoted 89 lines · Hannes Reinecke
Quoted 73 lines · On 9/18/20 5:49 AM, [email protected] wrote:
Quoted 70 lines · Ewan D. Milne
Quoted 54 lines · Jitendra Khasdev

This is patch to fix the race occurs between bus detach and alua_rtpg.

It fluses the all pending workqueue in bus detach handler, so it can avoid race between alua_bus_detach and alua_rtpg.

Here is call trace where race got detected.

multipathd call stack:
[exception RIP: native_queued_spin_lock_slowpath+100] --- <NMI exception stack> --- native_queued_spin_lock_slowpath at ffffffff89307f54 queued_spin_lock_slowpath at ffffffff89307c18 _raw_spin_lock_irq at ffffffff89bd797b alua_bus_detach at ffffffff8984dcc8 scsi_dh_release_device at ffffffff8984b6f2 scsi_device_dev_release_usercontext at ffffffff89846edf execute_in_process_context at ffffffff892c3e60 scsi_device_dev_release at ffffffff8984637c device_release at ffffffff89800fbc kobject_cleanup at ffffffff89bb1196 kobject_put at ffffffff89bb12ea
put_device at ffffffff89801283
scsi_device_put at ffffffff89838d5b scsi_disk_put at ffffffffc051f650 [sd_mod] sd_release at ffffffffc051f8a2 [sd_mod] __blkdev_put at ffffffff8952c79e
blkdev_put at ffffffff8952c80c
blkdev_close at ffffffff8952c8b5
__fput at ffffffff894e55e6
____fput at ffffffff894e57ee
task_work_run at ffffffff892c94dc exit_to_usermode_loop at ffffffff89204b12 do_syscall_64 at ffffffff892044da entry_SYSCALL_64_after_hwframe at ffffffff89c001b8

kworker:
[exception RIP: alua_rtpg+2003]
account_entity_dequeue at ffffffff892e42c1
alua_rtpg_work at ffffffff8984f097
process_one_work at ffffffff892c4c29
worker_thread at ffffffff892c5a4f
kthread at ffffffff892cb135
ret_from_fork at ffffffff89c00354

---
  drivers/scsi/device_handler/scsi_dh_alua.c | 3 +++

  1 file changed, 3 insertions(+)
drivers/scsi/device_handler/scsi_dh_alua.c +0 -0
index f32da0c..024a752 100644

drivers/scsi/device_handler/scsi_dh_alua.c static void alua_bus_detach(struct scsi_device *sdev) · line 1151

Quoted 8 lines
drivers/scsi/device_handler/scsi_dh_alua.c +2 -0
@@ -1144,6 +1144,9 @@ static void alua_bus_detach(struct scsi_device *sdev)
       struct alua_dh_data *h = sdev->handler_data;
       struct alua_port_group *pg;
   +    sdev_printk(KERN_INFO, sdev, "%s: flushing workqueues\n", ALUA_DH_NAME);
+    flush_workqueue(kaluad_wq);
+
       spin_lock(&h->pg_lock);
       pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
       rcu_assign_pointer(h->pg, NULL);

I'm not sure this is the best solution.  The current code references h->sdev when the dh_list is traversed.  So it needs to remain valid.  Fixing it by flushing the workqueue to avoid the list traversal code running leaves open the possibility that future code alterations may expose this problem again.

Quoted 9 lines
Quoted 3 lines

-Ewan

I see your point, but as we are in detach handler and this code path only execute when device is being detached. So, before detaching, flush work-queue will take care of any current code references h->sdev where dh_list is being traversed.

Flushing the workqueue is a bit of an overkill, seeing that we know exactly which workqueue element we're waiting for.

Quoted 4 lines

IMO, I do not think it would create any problem for future code alterations. Or may be I am missing something over here, what could be possible scenario for that?

Quoted 5 lines

Problem is more that I'd like to understand where exactly the race condition is. Can you figure out which spinlock is triggering in your stack trace?

Cheers,

Hannes

Hannes,

Race is between "alua_bus_detach" and "alua_rtpg_work".

Whenever we perform fail-over or turn off the switch, the path goes down, which eventually triggers
blkdev_put -> .. -> scsi_device_dev_release -> .. -> alua_bus_detach meanwhile another thread of alua_rtpg_work also running in parallel. Both threads are using sdev.

In alua_bus_detach, we are setting null to sdev. From above call trace (multipathd) we can see alua_bus_deatch ran first and set sdev to null. It keeps its execution continue and it does not have any problem.

1138 /*

1139  * alua_bus_detach - Detach device handler                                      
1140  * @sdev: device to be detached from                                            
1141  */                                                                             

1142 static void alua_bus_detach(struct scsi_device *sdev) 1143 {
1144 struct alua_dh_data *h = sdev->handler_data;
1145 struct alua_port_group *pg;
1146

1147         spin_lock(&h->pg_lock);                                                 
1148         pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));    
1149         rcu_assign_pointer(h->pg, NULL);                                        

*1150* h->sdev = NULL; << Looks detach handler won the race and set sdev to null
1151 spin_unlock(&h->pg_lock);
1152 if (pg) {
1153 spin_lock_irq(&pg->lock); <<< from the call trace we can see that we just acquired the lock and got NMI
exception because we encountered a BUG_ON from different thread.
1154 list_del_rcu(&h->node);

Meanwhile alua_rtpg try to check for BUG_ON(!h->sdev);

alua_rtpg_work -> alua_rtpg
----
505 static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg) 506 {
.
.
.
659 list_for_each_entry_rcu(h,
660 &tmp_pg->dh_list, node) {
661 /* h->sdev should always be valid */
*662* BUG_ON(!h->sdev); <<<< 2nd call trace caused the panic due to this bug on.
663 h->sdev->access_state = desc[0];
664 }
665 rcu_read_unlock();
666 }
----

So it looks, alua_rtpg_work triggered to alua_rtpg. alua_rtpg function is in its initial execution but didn't reach to line number 662. Meanwhile alua_bus_detach thread comes in and executes line no. 1150 which set sdev to null. Now, if alua_rtpg reaches to line 662 then it would cause the BUG_ON which will result in panic.

---
Jitendra

#7 lore raw
Quoted 129 lines · On 9/23/20 7:50 PM, [email protected] wrote:
Quoted 89 lines · Hannes Reinecke
Quoted 73 lines · On 9/18/20 5:49 AM, [email protected] wrote:
Quoted 70 lines · Ewan D. Milne
Quoted 54 lines · Jitendra Khasdev

This is patch to fix the race occurs between bus detach and alua_rtpg.

It fluses the all pending workqueue in bus detach handler, so it can avoid race between alua_bus_detach and alua_rtpg.

Here is call trace where race got detected.

multipathd call stack:
[exception RIP: native_queued_spin_lock_slowpath+100] --- <NMI exception stack> --- native_queued_spin_lock_slowpath at ffffffff89307f54 queued_spin_lock_slowpath at ffffffff89307c18 _raw_spin_lock_irq at ffffffff89bd797b alua_bus_detach at ffffffff8984dcc8 scsi_dh_release_device at ffffffff8984b6f2 scsi_device_dev_release_usercontext at ffffffff89846edf execute_in_process_context at ffffffff892c3e60 scsi_device_dev_release at ffffffff8984637c device_release at ffffffff89800fbc kobject_cleanup at ffffffff89bb1196 kobject_put at ffffffff89bb12ea
put_device at ffffffff89801283
scsi_device_put at ffffffff89838d5b scsi_disk_put at ffffffffc051f650 [sd_mod] sd_release at ffffffffc051f8a2 [sd_mod] __blkdev_put at ffffffff8952c79e
blkdev_put at ffffffff8952c80c
blkdev_close at ffffffff8952c8b5
__fput at ffffffff894e55e6
____fput at ffffffff894e57ee
task_work_run at ffffffff892c94dc exit_to_usermode_loop at ffffffff89204b12 do_syscall_64 at ffffffff892044da entry_SYSCALL_64_after_hwframe at ffffffff89c001b8

kworker:
[exception RIP: alua_rtpg+2003]
account_entity_dequeue at ffffffff892e42c1
alua_rtpg_work at ffffffff8984f097
process_one_work at ffffffff892c4c29
worker_thread at ffffffff892c5a4f
kthread at ffffffff892cb135
ret_from_fork at ffffffff89c00354

---
   drivers/scsi/device_handler/scsi_dh_alua.c | 3 +++
   1 file changed, 3 insertions(+)
drivers/scsi/device_handler/scsi_dh_alua.c +0 -0
index f32da0c..024a752 100644

drivers/scsi/device_handler/scsi_dh_alua.c static void alua_bus_detach(struct scsi_device *sdev) · line 1151

Quoted 8 lines
drivers/scsi/device_handler/scsi_dh_alua.c +2 -0
@@ -1144,6 +1144,9 @@ static void alua_bus_detach(struct scsi_device *sdev)
       struct alua_dh_data *h = sdev->handler_data;
       struct alua_port_group *pg;
   +    sdev_printk(KERN_INFO, sdev, "%s: flushing workqueues\n", ALUA_DH_NAME);
+    flush_workqueue(kaluad_wq);
+
       spin_lock(&h->pg_lock);
       pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
       rcu_assign_pointer(h->pg, NULL);

I'm not sure this is the best solution.  The current code references h->sdev when the dh_list is traversed.  So it needs to remain valid.  Fixing it by flushing the workqueue to avoid the list traversal code running leaves open the possibility that future code alterations may expose this problem again.

Quoted 9 lines
Quoted 3 lines

-Ewan

I see your point, but as we are in detach handler and this code path only execute when device is being detached. So, before detaching, flush work-queue will take care of any current code references h->sdev where dh_list is being traversed.

Flushing the workqueue is a bit of an overkill, seeing that we know exactly which workqueue element we're waiting for.

Quoted 4 lines

IMO, I do not think it would create any problem for future code alterations. Or may be I am missing something over here, what could be possible scenario for that?

Quoted 5 lines

Problem is more that I'd like to understand where exactly the race condition is. Can you figure out which spinlock is triggering in your stack trace?

Cheers,

Hannes

Hannes,

Race is between "alua_bus_detach" and "alua_rtpg_work".

Whenever we perform fail-over or turn off the switch, the path goes down, which eventually triggers
blkdev_put -> .. -> scsi_device_dev_release -> .. -> alua_bus_detach meanwhile another thread of alua_rtpg_work also running in parallel. Both threads are using sdev.

In alua_bus_detach, we are setting null to sdev. From above call trace (multipathd) we can see alua_bus_deatch ran first and set sdev to null. It keeps its execution continue and it does not have any problem.

1138 /*

1139  * alua_bus_detach - Detach device handler
1140  * @sdev: device to be detached from
1141  */

1142 static void alua_bus_detach(struct scsi_device *sdev) 1143 {
1144 struct alua_dh_data *h = sdev->handler_data;
1145 struct alua_port_group *pg;
1146

1147         spin_lock(&h->pg_lock);
1148         pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
1149         rcu_assign_pointer(h->pg, NULL);

*1150* h->sdev = NULL; << Looks detach handler won the race and set sdev to null
1151 spin_unlock(&h->pg_lock);
1152 if (pg) {
1153 spin_lock_irq(&pg->lock); <<< from the call trace we can see that we just acquired the lock and got NMI
exception because we encountered a BUG_ON from different thread.
1154 list_del_rcu(&h->node);

Meanwhile alua_rtpg try to check for BUG_ON(!h->sdev);

Quoted 17 lines

alua_rtpg_work -> alua_rtpg
----
505 static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg) 506 {
.
.
.
659 list_for_each_entry_rcu(h,
660 &tmp_pg->dh_list, node) {
661 /* h->sdev should always be valid */
*662* BUG_ON(!h->sdev); <<<< 2nd call trace caused the panic due to this bug on.
663 h->sdev->access_state = desc[0];
664 }
665 rcu_read_unlock();
666 }
----

Ah, yes.

We would need to take 'h->lock' here before checking 'h->sdev'.
Alternatively, we should be able to fix it by not setting h->sdev to NULL, and issuing rcu_synchronize() before issuing kfree(h):

@@ -1147,7 +1148,6 @@ static void alua_bus_detach(struct scsi_device *sdev)

        spin_lock(&h->pg_lock);
        pg = rcu_dereference_protected(h->pg, 
lockdep_is_held(&h->pg_lock));
        rcu_assign_pointer(h->pg, NULL);
-       h->sdev = NULL;
        spin_unlock(&h->pg_lock);
        if (pg) {
                spin_lock_irq(&pg->lock);
@@ -1156,6 +1156,7 @@ static void alua_bus_detach(struct scsi_device *sdev)
                kref_put(&pg->kref, release_port_group);
        }
        sdev->handler_data = NULL;
+       rcu_synchronize();
        kfree(h);

}

The 'rcu_synchronize()' will ensure that any concurrent thread has left the rcu-critical section (ie the loop mentioned above), and the issue will be avoided. Additionally, we could replace the BUG_ON() with

if (!h->sdev)

    continue;

and the problem should be solved.

Cheers,

Hannes

Signature · 4 lines
Dr. Hannes Reinecke		           Kernel Storage Architect
[email protected]			                  +49 911 74053 688
SUSE Software Solutions Germany GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), GF: Felix Imendörffer

From eb295823f4604a939d89cb21aad468fcd393484b Mon Sep 17 00:00:00 2001
From: Hannes Reinecke <[email protected]>
Date: Thu, 24 Sep 2020 12:33:22 +0200
Subject: [PATCH] scsi_dh_alua: avoid crash during alua_bus_detach()

alua_bus_detach() might be running concurrently with alua_rtpg_work(), so we might trip over h->sdev == NULL and call BUG_ON(). The correct way of handling it would be to not set h->sdev to NULL in alua_bus_detach(), and call rcu_synchronize() before the final delete to ensure that all concurrent threads have left the critical section.
Then we can get rid of the BUG_ON(), and replace it with a simple if condition.

---
 drivers/scsi/device_handler/scsi_dh_alua.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/scsi/device_handler/scsi_dh_alua.c +5 -4
index f32da0ca529e..308bda2e9c00 100644
@@ -658,8 +658,8 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg)
 					rcu_read_lock();
 					list_for_each_entry_rcu(h,
 						&tmp_pg->dh_list, node) {
-						/* h->sdev should always be valid */
-						BUG_ON(!h->sdev);
+						if (!h->sdev)
+							continue;
 						h->sdev->access_state = desc[0];
 					}
 					rcu_read_unlock();
@@ -705,7 +705,8 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg)
 			pg->expiry = 0;
 			rcu_read_lock();
 			list_for_each_entry_rcu(h, &pg->dh_list, node) {
-				BUG_ON(!h->sdev);
+				if (!h->sdev)
+					continue;
 				h->sdev->access_state =
 					(pg->state & SCSI_ACCESS_STATE_MASK);
 				if (pg->pref)
@@ -1147,7 +1148,6 @@ static void alua_bus_detach(struct scsi_device *sdev)
 	spin_lock(&h->pg_lock);
 	pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
 	rcu_assign_pointer(h->pg, NULL);
-	h->sdev = NULL;
 	spin_unlock(&h->pg_lock);
 	if (pg) {
 		spin_lock_irq(&pg->lock);
@@ -1156,6 +1156,7 @@ static void alua_bus_detach(struct scsi_device *sdev)
 		kref_put(&pg->kref, release_port_group);
 	}
 	sdev->handler_data = NULL;
+	synchronize_rcu();
 	kfree(h);
 }
 
Signature · 1 line
2.16.4
#8 lore raw
Quoted 171 lines · Hannes Reinecke
Quoted 129 lines · On 9/23/20 7:50 PM, [email protected] wrote:
Quoted 89 lines · Hannes Reinecke
Quoted 73 lines · On 9/18/20 5:49 AM, [email protected] wrote:
Quoted 70 lines · Ewan D. Milne
Quoted 54 lines · Jitendra Khasdev

This is patch to fix the race occurs between bus detach and alua_rtpg.

It fluses the all pending workqueue in bus detach handler, so it can avoid race between alua_bus_detach and alua_rtpg.

Here is call trace where race got detected.

multipathd call stack:
[exception RIP: native_queued_spin_lock_slowpath+100] --- <NMI exception stack> --- native_queued_spin_lock_slowpath at ffffffff89307f54 queued_spin_lock_slowpath at ffffffff89307c18 _raw_spin_lock_irq at ffffffff89bd797b alua_bus_detach at ffffffff8984dcc8 scsi_dh_release_device at ffffffff8984b6f2 scsi_device_dev_release_usercontext at ffffffff89846edf execute_in_process_context at ffffffff892c3e60 scsi_device_dev_release at ffffffff8984637c device_release at ffffffff89800fbc kobject_cleanup at ffffffff89bb1196 kobject_put at ffffffff89bb12ea
put_device at ffffffff89801283
scsi_device_put at ffffffff89838d5b scsi_disk_put at ffffffffc051f650 [sd_mod] sd_release at ffffffffc051f8a2 [sd_mod] __blkdev_put at ffffffff8952c79e
blkdev_put at ffffffff8952c80c
blkdev_close at ffffffff8952c8b5
__fput at ffffffff894e55e6
____fput at ffffffff894e57ee
task_work_run at ffffffff892c94dc exit_to_usermode_loop at ffffffff89204b12 do_syscall_64 at ffffffff892044da entry_SYSCALL_64_after_hwframe at ffffffff89c001b8

kworker:
[exception RIP: alua_rtpg+2003]
account_entity_dequeue at ffffffff892e42c1
alua_rtpg_work at ffffffff8984f097
process_one_work at ffffffff892c4c29
worker_thread at ffffffff892c5a4f
kthread at ffffffff892cb135
ret_from_fork at ffffffff89c00354

---
   drivers/scsi/device_handler/scsi_dh_alua.c | 3 +++

   1 file changed, 3 insertions(+)
drivers/scsi/device_handler/scsi_dh_alua.c +0 -0
index f32da0c..024a752 100644

drivers/scsi/device_handler/scsi_dh_alua.c static void alua_bus_detach(struct scsi_device *sdev) · line 1151

Quoted 8 lines
drivers/scsi/device_handler/scsi_dh_alua.c +2 -0
@@ -1144,6 +1144,9 @@ static void alua_bus_detach(struct scsi_device *sdev)
        struct alua_dh_data *h = sdev->handler_data;
        struct alua_port_group *pg;
    +    sdev_printk(KERN_INFO, sdev, "%s: flushing workqueues\n", ALUA_DH_NAME);
+    flush_workqueue(kaluad_wq);
+
        spin_lock(&h->pg_lock);
        pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
        rcu_assign_pointer(h->pg, NULL);

I'm not sure this is the best solution.  The current code references h->sdev when the dh_list is traversed.  So it needs to remain valid.  Fixing it by flushing the workqueue to avoid the list traversal code running leaves open the possibility that future code alterations may expose this problem again.

Quoted 9 lines
Quoted 3 lines

-Ewan

I see your point, but as we are in detach handler and this code path only execute when device is being detached. So, before detaching, flush work-queue will take care of any current code references h->sdev where dh_list is being traversed.

Flushing the workqueue is a bit of an overkill, seeing that we know exactly which workqueue element we're waiting for.

Quoted 4 lines

IMO, I do not think it would create any problem for future code alterations. Or may be I am missing something over here, what could be possible scenario for that?

Quoted 5 lines

Problem is more that I'd like to understand where exactly the race condition is. Can you figure out which spinlock is triggering in your stack trace?

Cheers,

Hannes

Hannes,

Race is between "alua_bus_detach" and "alua_rtpg_work".

Whenever we perform fail-over or turn off the switch, the path goes down, which eventually triggers
blkdev_put -> .. -> scsi_device_dev_release -> .. ->  alua_bus_detach meanwhile another thread of alua_rtpg_work also running in parallel. Both threads are using sdev.

In alua_bus_detach, we are setting null to sdev. From above call trace (multipathd) we can see alua_bus_deatch ran first and set sdev to null. It keeps its execution continue and it does not have any problem.

1138 /*
1139  * alua_bus_detach - Detach device handler
1140  * @sdev: device to be detached from
1141  */
1142 static void alua_bus_detach(struct scsi_device *sdev)
1143 {
1144         struct alua_dh_data *h = sdev->handler_data;
1145         struct alua_port_group *pg;
1146
1147         spin_lock(&h->pg_lock);
1148         pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
1149         rcu_assign_pointer(h->pg, NULL);
*1150*         h->sdev = NULL;  << Looks detach handler won the race and set sdev to null
1151         spin_unlock(&h->pg_lock);
1152         if (pg) {
1153                 spin_lock_irq(&pg->lock); <<< from the call trace we can see that we just acquired the lock and got NMI exception because we encountered a BUG_ON from different thread.
1154                 list_del_rcu(&h->node);

Meanwhile alua_rtpg try to check for BUG_ON(!h->sdev);

Quoted 17 lines

alua_rtpg_work -> alua_rtpg
----
  505 static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg)
  506 {
  .
  .
  .
  659                                         list_for_each_entry_rcu(h,
  660                                                 &tmp_pg->dh_list, node) {
  661                                                 /* h->sdev should always be valid */
  *662*                                                 BUG_ON(!h->sdev); <<<< 2nd call trace caused the panic due to this bug on. 663                                                 h->sdev->access_state = desc[0];
  664                                         }
  665                                         rcu_read_unlock();
  666                                 }
----

Ah, yes.

We would need to take 'h->lock' here before checking 'h->sdev'.
Alternatively, we should be able to fix it by not setting h->sdev to NULL, and issuing rcu_synchronize() before issuing kfree(h):

drivers/scsi/device_handler/scsi_dh_alua.c +1 -1
@@ -1147,7 +1148,6 @@ static void alua_bus_detach(struct scsi_device *sdev)
         spin_lock(&h->pg_lock);
         pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
         rcu_assign_pointer(h->pg, NULL);
-       h->sdev = NULL;
         spin_unlock(&h->pg_lock);
         if (pg) {
                 spin_lock_irq(&pg->lock);
@@ -1156,6 +1156,7 @@ static void alua_bus_detach(struct scsi_device *sdev)
                 kref_put(&pg->kref, release_port_group);
         }
         sdev->handler_data = NULL;
+       rcu_synchronize();
         kfree(h);
  }
 

The 'rcu_synchronize()' will ensure that any concurrent thread has left the rcu-critical section (ie the loop mentioned above), and the issue will be avoided. Additionally, we could replace the BUG_ON() with

Quoted 8 lines

if (!h->sdev)
    continue;

and the problem should be solved.

Cheers,

Hannes

Thanks Hannes for patch, I am currently testing it.

---
Jitendra

#9 lore raw
In reply to Hannes Reinecke

Hi Hannes,

Quoted 171 lines · Hannes Reinecke
Quoted 129 lines · On 9/23/20 7:50 PM, [email protected] wrote:
Quoted 89 lines · Hannes Reinecke
Quoted 73 lines · On 9/18/20 5:49 AM, [email protected] wrote:
Quoted 70 lines · Ewan D. Milne
Quoted 54 lines · Jitendra Khasdev

This is patch to fix the race occurs between bus detach and alua_rtpg.

It fluses the all pending workqueue in bus detach handler, so it can avoid race between alua_bus_detach and alua_rtpg.

Here is call trace where race got detected.

multipathd call stack:
[exception RIP: native_queued_spin_lock_slowpath+100] --- <NMI exception stack> --- native_queued_spin_lock_slowpath at ffffffff89307f54 queued_spin_lock_slowpath at ffffffff89307c18 _raw_spin_lock_irq at ffffffff89bd797b alua_bus_detach at ffffffff8984dcc8 scsi_dh_release_device at ffffffff8984b6f2 scsi_device_dev_release_usercontext at ffffffff89846edf execute_in_process_context at ffffffff892c3e60 scsi_device_dev_release at ffffffff8984637c device_release at ffffffff89800fbc kobject_cleanup at ffffffff89bb1196 kobject_put at ffffffff89bb12ea
put_device at ffffffff89801283
scsi_device_put at ffffffff89838d5b scsi_disk_put at ffffffffc051f650 [sd_mod] sd_release at ffffffffc051f8a2 [sd_mod] __blkdev_put at ffffffff8952c79e
blkdev_put at ffffffff8952c80c
blkdev_close at ffffffff8952c8b5
__fput at ffffffff894e55e6
____fput at ffffffff894e57ee
task_work_run at ffffffff892c94dc exit_to_usermode_loop at ffffffff89204b12 do_syscall_64 at ffffffff892044da entry_SYSCALL_64_after_hwframe at ffffffff89c001b8

kworker:
[exception RIP: alua_rtpg+2003]
account_entity_dequeue at ffffffff892e42c1
alua_rtpg_work at ffffffff8984f097
process_one_work at ffffffff892c4c29
worker_thread at ffffffff892c5a4f
kthread at ffffffff892cb135
ret_from_fork at ffffffff89c00354

---
   drivers/scsi/device_handler/scsi_dh_alua.c | 3 +++

   1 file changed, 3 insertions(+)
drivers/scsi/device_handler/scsi_dh_alua.c +0 -0
index f32da0c..024a752 100644

drivers/scsi/device_handler/scsi_dh_alua.c static void alua_bus_detach(struct scsi_device *sdev) · line 1151

Quoted 8 lines
drivers/scsi/device_handler/scsi_dh_alua.c +2 -0
@@ -1144,6 +1144,9 @@ static void alua_bus_detach(struct scsi_device *sdev)
        struct alua_dh_data *h = sdev->handler_data;
        struct alua_port_group *pg;
    +    sdev_printk(KERN_INFO, sdev, "%s: flushing workqueues\n", ALUA_DH_NAME);
+    flush_workqueue(kaluad_wq);
+
        spin_lock(&h->pg_lock);
        pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
        rcu_assign_pointer(h->pg, NULL);

I'm not sure this is the best solution.  The current code references h->sdev when the dh_list is traversed.  So it needs to remain valid.  Fixing it by flushing the workqueue to avoid the list traversal code running leaves open the possibility that future code alterations may expose this problem again.

Quoted 9 lines
Quoted 3 lines

-Ewan

I see your point, but as we are in detach handler and this code path only execute when device is being detached. So, before detaching, flush work-queue will take care of any current code references h->sdev where dh_list is being traversed.

Flushing the workqueue is a bit of an overkill, seeing that we know exactly which workqueue element we're waiting for.

Quoted 4 lines

IMO, I do not think it would create any problem for future code alterations. Or may be I am missing something over here, what could be possible scenario for that?

Quoted 5 lines

Problem is more that I'd like to understand where exactly the race condition is. Can you figure out which spinlock is triggering in your stack trace?

Cheers,

Hannes

Hannes,

Race is between "alua_bus_detach" and "alua_rtpg_work".

Whenever we perform fail-over or turn off the switch, the path goes down, which eventually triggers
blkdev_put -> .. -> scsi_device_dev_release -> .. ->  alua_bus_detach meanwhile another thread of alua_rtpg_work also running in parallel. Both threads are using sdev.

In alua_bus_detach, we are setting null to sdev. From above call trace (multipathd) we can see alua_bus_deatch ran first and set sdev to null. It keeps its execution continue and it does not have any problem.

1138 /*
1139  * alua_bus_detach - Detach device handler
1140  * @sdev: device to be detached from
1141  */
1142 static void alua_bus_detach(struct scsi_device *sdev)
1143 {
1144         struct alua_dh_data *h = sdev->handler_data;
1145         struct alua_port_group *pg;
1146
1147         spin_lock(&h->pg_lock);
1148         pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
1149         rcu_assign_pointer(h->pg, NULL);
*1150*         h->sdev = NULL;  << Looks detach handler won the race and set sdev to null
1151         spin_unlock(&h->pg_lock);
1152         if (pg) {
1153                 spin_lock_irq(&pg->lock); <<< from the call trace we can see that we just acquired the lock and got NMI exception because we encountered a BUG_ON from different thread.
1154                 list_del_rcu(&h->node);

Meanwhile alua_rtpg try to check for BUG_ON(!h->sdev);

Quoted 17 lines

alua_rtpg_work -> alua_rtpg
----
  505 static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg)
  506 {
  .
  .
  .
  659                                         list_for_each_entry_rcu(h,
  660                                                 &tmp_pg->dh_list, node) {
  661                                                 /* h->sdev should always be valid */
  *662*                                                 BUG_ON(!h->sdev); <<<< 2nd call trace caused the panic due to this bug on. 663                                                 h->sdev->access_state = desc[0];
  664                                         }
  665                                         rcu_read_unlock();
  666                                 }
----

Ah, yes.

We would need to take 'h->lock' here before checking 'h->sdev'.
Alternatively, we should be able to fix it by not setting h->sdev to NULL, and issuing rcu_synchronize() before issuing kfree(h):

drivers/scsi/device_handler/scsi_dh_alua.c +1 -1
@@ -1147,7 +1148,6 @@ static void alua_bus_detach(struct scsi_device *sdev)
         spin_lock(&h->pg_lock);
         pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
         rcu_assign_pointer(h->pg, NULL);
-       h->sdev = NULL;
         spin_unlock(&h->pg_lock);
         if (pg) {
                 spin_lock_irq(&pg->lock);
@@ -1156,6 +1156,7 @@ static void alua_bus_detach(struct scsi_device *sdev)
                 kref_put(&pg->kref, release_port_group);
         }
         sdev->handler_data = NULL;
+       rcu_synchronize();
         kfree(h);
  }
 

The 'rcu_synchronize()' will ensure that any concurrent thread has left the rcu-critical section (ie the loop mentioned above), and the issue will be avoided. Additionally, we could replace the BUG_ON() with

Quoted 8 lines

if (!h->sdev)
    continue;

and the problem should be solved.

Cheers,

Hannes

This patch works and avoid crash during fail-over. It looks good to me in testing.

---
Jitendra

#10 lore raw

Hi Hannes,

Quoted 181 lines · On 10/12/20 2:22 PM, [email protected] wrote:

Hi Hannes,

Quoted 178 lines · Hannes Reinecke
Quoted 129 lines · On 9/23/20 7:50 PM, [email protected] wrote:
Quoted 89 lines · Hannes Reinecke
Quoted 73 lines · On 9/18/20 5:49 AM, [email protected] wrote:
Quoted 70 lines · Ewan D. Milne
Quoted 54 lines · Jitendra Khasdev

This is patch to fix the race occurs between bus detach and alua_rtpg.

It fluses the all pending workqueue in bus detach handler, so it can avoid race between alua_bus_detach and alua_rtpg.

Here is call trace where race got detected.

multipathd call stack:
[exception RIP: native_queued_spin_lock_slowpath+100] --- <NMI exception stack> --- native_queued_spin_lock_slowpath at ffffffff89307f54 queued_spin_lock_slowpath at ffffffff89307c18 _raw_spin_lock_irq at ffffffff89bd797b alua_bus_detach at ffffffff8984dcc8 scsi_dh_release_device at ffffffff8984b6f2 scsi_device_dev_release_usercontext at ffffffff89846edf execute_in_process_context at ffffffff892c3e60 scsi_device_dev_release at ffffffff8984637c device_release at ffffffff89800fbc kobject_cleanup at ffffffff89bb1196 kobject_put at ffffffff89bb12ea
put_device at ffffffff89801283
scsi_device_put at ffffffff89838d5b scsi_disk_put at ffffffffc051f650 [sd_mod] sd_release at ffffffffc051f8a2 [sd_mod] __blkdev_put at ffffffff8952c79e
blkdev_put at ffffffff8952c80c
blkdev_close at ffffffff8952c8b5
__fput at ffffffff894e55e6
____fput at ffffffff894e57ee
task_work_run at ffffffff892c94dc exit_to_usermode_loop at ffffffff89204b12 do_syscall_64 at ffffffff892044da entry_SYSCALL_64_after_hwframe at ffffffff89c001b8

kworker:
[exception RIP: alua_rtpg+2003]
account_entity_dequeue at ffffffff892e42c1
alua_rtpg_work at ffffffff8984f097
process_one_work at ffffffff892c4c29
worker_thread at ffffffff892c5a4f
kthread at ffffffff892cb135
ret_from_fork at ffffffff89c00354

---
   drivers/scsi/device_handler/scsi_dh_alua.c | 3 +++

   1 file changed, 3 insertions(+)
drivers/scsi/device_handler/scsi_dh_alua.c +0 -0
index f32da0c..024a752 100644

drivers/scsi/device_handler/scsi_dh_alua.c static void alua_bus_detach(struct scsi_device *sdev) · line 1151

Quoted 8 lines
drivers/scsi/device_handler/scsi_dh_alua.c +2 -0
@@ -1144,6 +1144,9 @@ static void alua_bus_detach(struct scsi_device *sdev)
        struct alua_dh_data *h = sdev->handler_data;
        struct alua_port_group *pg;
    +    sdev_printk(KERN_INFO, sdev, "%s: flushing workqueues\n", ALUA_DH_NAME);
+    flush_workqueue(kaluad_wq);
+
        spin_lock(&h->pg_lock);
        pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
        rcu_assign_pointer(h->pg, NULL);

I'm not sure this is the best solution.  The current code references h->sdev when the dh_list is traversed.  So it needs to remain valid.  Fixing it by flushing the workqueue to avoid the list traversal code running leaves open the possibility that future code alterations may expose this problem again.

Quoted 9 lines
Quoted 3 lines

-Ewan

I see your point, but as we are in detach handler and this code path only execute when device is being detached. So, before detaching, flush work-queue will take care of any current code references h->sdev where dh_list is being traversed.

Flushing the workqueue is a bit of an overkill, seeing that we know exactly which workqueue element we're waiting for.

Quoted 4 lines

IMO, I do not think it would create any problem for future code alterations. Or may be I am missing something over here, what could be possible scenario for that?

Quoted 5 lines

Problem is more that I'd like to understand where exactly the race condition is. Can you figure out which spinlock is triggering in your stack trace?

Cheers,

Hannes

Hannes,

Race is between "alua_bus_detach" and "alua_rtpg_work".

Whenever we perform fail-over or turn off the switch, the path goes down, which eventually triggers
blkdev_put -> .. -> scsi_device_dev_release -> .. ->  alua_bus_detach meanwhile another thread of alua_rtpg_work also running in parallel. Both threads are using sdev.

In alua_bus_detach, we are setting null to sdev. From above call trace (multipathd) we can see alua_bus_deatch ran first and set sdev to null. It keeps its execution continue and it does not have any problem.

1138 /*
1139  * alua_bus_detach - Detach device handler
1140  * @sdev: device to be detached from
1141  */
1142 static void alua_bus_detach(struct scsi_device *sdev)
1143 {
1144         struct alua_dh_data *h = sdev->handler_data;
1145         struct alua_port_group *pg;
1146
1147         spin_lock(&h->pg_lock);
1148         pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
1149         rcu_assign_pointer(h->pg, NULL);
*1150*         h->sdev = NULL;  << Looks detach handler won the race and set sdev to null
1151         spin_unlock(&h->pg_lock);
1152         if (pg) {
1153                 spin_lock_irq(&pg->lock); <<< from the call trace we can see that we just acquired the lock and got NMI exception because we encountered a BUG_ON from different thread.
1154                 list_del_rcu(&h->node);

Meanwhile alua_rtpg try to check for BUG_ON(!h->sdev);

Quoted 17 lines

alua_rtpg_work -> alua_rtpg
----
  505 static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg)
  506 {
  .
  .
  .
  659                                         list_for_each_entry_rcu(h,
  660                                                 &tmp_pg->dh_list, node) {
  661                                                 /* h->sdev should always be valid */
  *662*                                                 BUG_ON(!h->sdev); <<<< 2nd call trace caused the panic due to this bug on. 663                                                 h->sdev->access_state = desc[0];
  664                                         }
  665                                         rcu_read_unlock();
  666                                 }
----

Ah, yes.

We would need to take 'h->lock' here before checking 'h->sdev'.
Alternatively, we should be able to fix it by not setting h->sdev to NULL, and issuing rcu_synchronize() before issuing kfree(h):

drivers/scsi/device_handler/scsi_dh_alua.c +1 -1
@@ -1147,7 +1148,6 @@ static void alua_bus_detach(struct scsi_device *sdev)
         spin_lock(&h->pg_lock);
         pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
         rcu_assign_pointer(h->pg, NULL);
-       h->sdev = NULL;
         spin_unlock(&h->pg_lock);
         if (pg) {
                 spin_lock_irq(&pg->lock);
@@ -1156,6 +1156,7 @@ static void alua_bus_detach(struct scsi_device *sdev)
                 kref_put(&pg->kref, release_port_group);
         }
         sdev->handler_data = NULL;
+       rcu_synchronize();
         kfree(h);
  }
 

The 'rcu_synchronize()' will ensure that any concurrent thread has left the rcu-critical section (ie the loop mentioned above), and the issue will be avoided. Additionally, we could replace the BUG_ON() with

if (!h->sdev)
    continue;

and the problem should be solved.

Cheers,

Quoted 8 lines
Quoted 1 line

Hannes

This patch works and avoid crash during fail-over. It looks good to me in testing.

---
Jitendra

Gentle reminder, I am wondering if we can proceed to integrate this patch to mainline.

---
Jitendra

author Reviewed-by Tested-by
#11 lore raw
In reply to Hannes Reinecke
Quoted 175 lines · Hannes Reinecke
Quoted 129 lines · On 9/23/20 7:50 PM, [email protected] wrote:
Quoted 89 lines · Hannes Reinecke
Quoted 73 lines · On 9/18/20 5:49 AM, [email protected] wrote:
Quoted 70 lines · Ewan D. Milne
Quoted 54 lines · Jitendra Khasdev

This is patch to fix the race occurs between bus detach and alua_rtpg.

It fluses the all pending workqueue in bus detach handler, so it can avoid race between alua_bus_detach and alua_rtpg.

Here is call trace where race got detected.

multipathd call stack:
[exception RIP: native_queued_spin_lock_slowpath+100] --- <NMI exception stack> --- native_queued_spin_lock_slowpath at ffffffff89307f54 queued_spin_lock_slowpath at ffffffff89307c18 _raw_spin_lock_irq at ffffffff89bd797b alua_bus_detach at ffffffff8984dcc8 scsi_dh_release_device at ffffffff8984b6f2 scsi_device_dev_release_usercontext at ffffffff89846edf execute_in_process_context at ffffffff892c3e60 scsi_device_dev_release at ffffffff8984637c device_release at ffffffff89800fbc kobject_cleanup at ffffffff89bb1196 kobject_put at ffffffff89bb12ea
put_device at ffffffff89801283
scsi_device_put at ffffffff89838d5b scsi_disk_put at ffffffffc051f650 [sd_mod] sd_release at ffffffffc051f8a2 [sd_mod] __blkdev_put at ffffffff8952c79e
blkdev_put at ffffffff8952c80c
blkdev_close at ffffffff8952c8b5
__fput at ffffffff894e55e6
____fput at ffffffff894e57ee
task_work_run at ffffffff892c94dc exit_to_usermode_loop at ffffffff89204b12 do_syscall_64 at ffffffff892044da entry_SYSCALL_64_after_hwframe at ffffffff89c001b8

kworker:
[exception RIP: alua_rtpg+2003]
account_entity_dequeue at ffffffff892e42c1
alua_rtpg_work at ffffffff8984f097
process_one_work at ffffffff892c4c29
worker_thread at ffffffff892c5a4f
kthread at ffffffff892cb135
ret_from_fork at ffffffff89c00354

---
  drivers/scsi/device_handler/scsi_dh_alua.c | 3 +++

  1 file changed, 3 insertions(+)
drivers/scsi/device_handler/scsi_dh_alua.c +0 -0
index f32da0c..024a752 100644

drivers/scsi/device_handler/scsi_dh_alua.c static void alua_bus_detach(struct scsi_device *sdev) · line 1151

Quoted 8 lines
drivers/scsi/device_handler/scsi_dh_alua.c +2 -0
@@ -1144,6 +1144,9 @@ static void alua_bus_detach(struct scsi_device *sdev)
       struct alua_dh_data *h = sdev->handler_data;
       struct alua_port_group *pg;
   +    sdev_printk(KERN_INFO, sdev, "%s: flushing workqueues\n", ALUA_DH_NAME);
+    flush_workqueue(kaluad_wq);
+
       spin_lock(&h->pg_lock);
       pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
       rcu_assign_pointer(h->pg, NULL);

I'm not sure this is the best solution.  The current code references h->sdev when the dh_list is traversed.  So it needs to remain valid.  Fixing it by flushing the workqueue to avoid the list traversal code running leaves open the possibility that future code alterations may expose this problem again.

Quoted 9 lines
Quoted 3 lines

-Ewan

I see your point, but as we are in detach handler and this code path only execute when device is being detached. So, before detaching, flush work-queue will take care of any current code references h->sdev where dh_list is being traversed.

Flushing the workqueue is a bit of an overkill, seeing that we know exactly which workqueue element we're waiting for.

Quoted 4 lines

IMO, I do not think it would create any problem for future code alterations. Or may be I am missing something over here, what could be possible scenario for that?

Quoted 5 lines

Problem is more that I'd like to understand where exactly the race condition is. Can you figure out which spinlock is triggering in your stack trace?

Cheers,

Hannes

Hannes,

Race is between "alua_bus_detach" and "alua_rtpg_work".

Whenever we perform fail-over or turn off the switch, the path goes down, which eventually triggers
blkdev_put -> .. -> scsi_device_dev_release -> .. -> alua_bus_detach meanwhile another thread of alua_rtpg_work also running in parallel. Both threads are using sdev.

In alua_bus_detach, we are setting null to sdev. From above call trace (multipathd) we can see alua_bus_deatch ran first and set sdev to null. It keeps its execution continue and it does not have any problem.

1138 /*

1139  * alua_bus_detach - Detach device handler
1140  * @sdev: device to be detached from
1141  */

1142 static void alua_bus_detach(struct scsi_device *sdev) 1143 {
1144 struct alua_dh_data *h = sdev->handler_data;
1145 struct alua_port_group *pg;
1146

1147         spin_lock(&h->pg_lock);
1148         pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
1149         rcu_assign_pointer(h->pg, NULL);

*1150* h->sdev = NULL; << Looks detach handler won the race and set sdev to null
1151 spin_unlock(&h->pg_lock);
1152 if (pg) {
1153 spin_lock_irq(&pg->lock); <<< from the call trace we can see that we just acquired the lock and got NMI
exception because we encountered a BUG_ON from different thread.
1154 list_del_rcu(&h->node);

Meanwhile alua_rtpg try to check for BUG_ON(!h->sdev);

Quoted 17 lines

alua_rtpg_work -> alua_rtpg
----
505 static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg) 506 {
.
.
.
659 list_for_each_entry_rcu(h,
660 &tmp_pg->dh_list, node) {
661 /* h->sdev should always be valid */
*662* BUG_ON(!h->sdev); <<<< 2nd call trace caused the panic due to this bug on.
663 h->sdev->access_state = desc[0];
664 }
665 rcu_read_unlock();
666 }
----

Ah, yes.

We would need to take 'h->lock' here before checking 'h->sdev'. Alternatively, we should be able to fix it by not setting h->sdev to NULL, and issuing rcu_synchronize() before issuing kfree(h):

drivers/scsi/device_handler/scsi_dh_alua.c +0 -1
@@ -1147,7 +1148,6 @@ static void alua_bus_detach(struct scsi_device *sdev)
        spin_lock(&h->pg_lock);
        pg = rcu_dereference_protected(h->pg,
 lockdep_is_held(&h->pg_lock));
        rcu_assign_pointer(h->pg, NULL);
-       h->sdev = NULL;
        spin_unlock(&h->pg_lock);
        if (pg) {
                spin_lock_irq(&pg->lock);
drivers/scsi/device_handler/scsi_dh_alua.c +1 -0
@@ -1156,6 +1156,7 @@ static void alua_bus_detach(struct scsi_device *sdev)
                kref_put(&pg->kref, release_port_group);
        }
        sdev->handler_data = NULL;
+       rcu_synchronize();
        kfree(h);
 }
 

The 'rcu_synchronize()' will ensure that any concurrent thread has left the rcu-critical section (ie the loop mentioned above), and the issue will be avoided.
Additionally, we could replace the BUG_ON() with

Quoted 30 lines

if (!h->sdev)

    continue;

and the problem should be solved.

Cheers,

Hannes

Signature · 21 lines
Dr. Hannes Reinecke		           Kernel Storage Architect
[email protected]			                  +49 911 74053 688
SUSE Software Solutions Germany GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), GF: Felix Imendörffer

From eb295823f4604a939d89cb21aad468fcd393484b Mon Sep 17 00:00:00 2001
From: Hannes Reinecke <[email protected]>
Date: Thu, 24 Sep 2020 12:33:22 +0200
Subject: [PATCH] scsi_dh_alua: avoid crash during alua_bus_detach()

alua_bus_detach() might be running concurrently with alua_rtpg_work(),
so we might trip over h->sdev == NULL and call BUG_ON().
The correct way of handling it would be to not set h->sdev to NULL
in alua_bus_detach(), and call rcu_synchronize() before the final
delete to ensure that all concurrent threads have left the critical
section.
Then we can get rid of the BUG_ON(), and replace it with a simple
if condition.

Signed-off-by: Hannes Reinecke <[email protected]>
---
Quoted 47 lines
 drivers/scsi/device_handler/scsi_dh_alua.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/scsi/device_handler/scsi_dh_alua.c +5 -4
index f32da0ca529e..308bda2e9c00 100644
@@ -658,8 +658,8 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg)
 					rcu_read_lock();
 					list_for_each_entry_rcu(h,
 						&tmp_pg->dh_list, node) {
-						/* h->sdev should always be valid */
-						BUG_ON(!h->sdev);
+						if (!h->sdev)
+							continue;
 						h->sdev->access_state = desc[0];
 					}
 					rcu_read_unlock();
@@ -705,7 +705,8 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg)
 			pg->expiry = 0;
 			rcu_read_lock();
 			list_for_each_entry_rcu(h, &pg->dh_list, node) {
-				BUG_ON(!h->sdev);
+				if (!h->sdev)
+					continue;
 				h->sdev->access_state =
 					(pg->state & SCSI_ACCESS_STATE_MASK);
 				if (pg->pref)
@@ -1147,7 +1148,6 @@ static void alua_bus_detach(struct scsi_device *sdev)
 	spin_lock(&h->pg_lock);
 	pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
 	rcu_assign_pointer(h->pg, NULL);
-	h->sdev = NULL;
 	spin_unlock(&h->pg_lock);
 	if (pg) {
 		spin_lock_irq(&pg->lock);
@@ -1156,6 +1156,7 @@ static void alua_bus_detach(struct scsi_device *sdev)
 		kref_put(&pg->kref, release_port_group);
 	}
 	sdev->handler_data = NULL;
+	synchronize_rcu();
 	kfree(h);
 }
 
Signature · 1 line
2.16.4