Skip to contentSkip to conversation

nl80211: fix beacon tx rate mask validation

PATCH New Rajkumar Manoharan 1 participant 2 messages Oct 16, 2020 802.11 (including cfg80211/NL80211)

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 nl80211: fix beacon tx rate mask validation

While adding HE MCS beacon tx rate support, it is observed that legacy beacon tx rate in VHT hwsim test suite is failed. Whenever the application doesn't explicitly set VHT/MCS rate attribute in fixed rate command, by default all HE MCS masks are enabled in cfg80211. In beacon fixed rate, more than one rate mask is not allowed. Fix that by not setting all rate mask by default in case of beacon tx rate.

---
 net/wireless/nl80211.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)
net/wireless/nl80211.c +10 -5
index 554796a6c6fe..b61699a04dc4 100644
@@ -4594,7 +4594,8 @@ static int nl80211_parse_tx_bitrate_mask(struct genl_info *info,
 					 struct nlattr *attrs[],
 					 enum nl80211_attrs attr,
 					 struct cfg80211_bitrate_mask *mask,
-					 struct net_device *dev)
+					 struct net_device *dev,
+					 bool default_all_enabled)
 {
 	struct nlattr *tb[NL80211_TXRATE_MAX + 1];
 	struct cfg80211_registered_device *rdev = info->user_ptr[0];
@@ -4609,6 +4610,9 @@ static int nl80211_parse_tx_bitrate_mask(struct genl_info *info,
 	for (i = 0; i < NUM_NL80211_BANDS; i++) {
 		const struct ieee80211_sta_he_cap *he_cap;
 
+		if (!default_all_enabled)
+			break;
+
 		sband = rdev->wiphy.bands[i];
 
 		if (!sband)
@@ -5243,7 +5247,7 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
 		err = nl80211_parse_tx_bitrate_mask(info, info->attrs,
 						    NL80211_ATTR_TX_RATES,
 						    &params.beacon_rate,
-						    dev);
+						    dev, false);
 		if (err)
 			return err;
 
@@ -11087,7 +11091,7 @@ static int nl80211_set_tx_bitrate_mask(struct sk_buff *skb,
 
 	err = nl80211_parse_tx_bitrate_mask(info, info->attrs,
 					    NL80211_ATTR_TX_RATES, &mask,
-					    dev);
+					    dev, true);
 	if (err)
 		return err;
 
@@ -11696,7 +11700,7 @@ static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info)
 		err = nl80211_parse_tx_bitrate_mask(info, info->attrs,
 						    NL80211_ATTR_TX_RATES,
 						    &setup.beacon_rate,
-						    dev);
+						    dev, false);
 		if (err)
 			return err;
 
@@ -14476,7 +14480,8 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
 		if (tid_conf->txrate_type != NL80211_TX_RATE_AUTOMATIC) {
 			attr = NL80211_TID_CONFIG_ATTR_TX_RATE;
 			err = nl80211_parse_tx_bitrate_mask(info, attrs, attr,
-						    &tid_conf->txrate_mask, dev);
+						    &tid_conf->txrate_mask, dev,
+						    true);
 			if (err)
 				return err;
 
Signature · 1 line
2.7.4
#1 lore raw

PATCH 2/2 cfg80211: add support to configure HE MCS for beacon rate

This allows an option to configure a single HE MCS beacon tx rate.

---
 include/uapi/linux/nl80211.h |  9 +++++++--
 net/wireless/nl80211.c       | 25 +++++++++++++++++++++++--
 2 files changed, 30 insertions(+), 4 deletions(-)
include/uapi/linux/nl80211.h +7 -2
index 47700a2b9af9..0c9f0b8a1e4e 100644
@@ -1750,8 +1750,9 @@ enum nl80211_commands {
  *	specify just a single bitrate, which is to be used for the beacon.
  *	The driver must also specify support for this with the extended
  *	features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
- *	NL80211_EXT_FEATURE_BEACON_RATE_HT and
- *	NL80211_EXT_FEATURE_BEACON_RATE_VHT.
+ *	NL80211_EXT_FEATURE_BEACON_RATE_HT,
+ *	NL80211_EXT_FEATURE_BEACON_RATE_VHT and
+ *	NL80211_EXT_FEATURE_BEACON_RATE_HE.
  *
  * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
  *	at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
@@ -5896,6 +5897,9 @@ enum nl80211_feature_flags {
  * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports
  *	unsolicited broadcast probe response transmission
  *
+ * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate
+ *	configuration (AP/mesh) with HE rates.
+ *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
@@ -5956,6 +5960,7 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_SAE_OFFLOAD_AP,
 	NL80211_EXT_FEATURE_FILS_DISCOVERY,
 	NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP,
+	NL80211_EXT_FEATURE_BEACON_RATE_HE,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
net/wireless/nl80211.c +23 -2
index b61699a04dc4..2e24d6eef791 100644
@@ -4680,6 +4680,7 @@ static int nl80211_parse_tx_bitrate_mask(struct genl_info *info,
 					mask->control[band].ht_mcs))
 				return -EINVAL;
 		}
+
 		if (tb[NL80211_TXRATE_VHT]) {
 			if (!vht_set_mcs_mask(
 					sband,
@@ -4687,6 +4688,7 @@ static int nl80211_parse_tx_bitrate_mask(struct genl_info *info,
 					mask->control[band].vht_mcs))
 				return -EINVAL;
 		}
+
 		if (tb[NL80211_TXRATE_GI]) {
 			mask->control[band].gi =
 				nla_get_u8(tb[NL80211_TXRATE_GI]);
@@ -4698,6 +4700,7 @@ static int nl80211_parse_tx_bitrate_mask(struct genl_info *info,
 				     nla_data(tb[NL80211_TXRATE_HE]),
 				     mask->control[band].he_mcs))
 			return -EINVAL;
+
 		if (tb[NL80211_TXRATE_HE_GI])
 			mask->control[band].he_gi =
 				nla_get_u8(tb[NL80211_TXRATE_HE_GI]);
@@ -4739,7 +4742,7 @@ static int validate_beacon_tx_rate(struct cfg80211_registered_device *rdev,
 				   enum nl80211_band band,
 				   struct cfg80211_bitrate_mask *beacon_rate)
 {
-	u32 count_ht, count_vht, i;
+	u32 count_ht, count_vht, count_he, i;
 	u32 rate = beacon_rate->control[band].legacy;
 
 	/* Allow only one rate */
@@ -4772,7 +4775,21 @@ static int validate_beacon_tx_rate(struct cfg80211_registered_device *rdev,
 			return -EINVAL;
 	}
 
-	if ((count_ht && count_vht) || (!rate && !count_ht && !count_vht))
+	count_he = 0;
+	for (i = 0; i < NL80211_HE_NSS_MAX; i++) {
+		if (hweight16(beacon_rate->control[band].he_mcs[i]) > 1) {
+			return -EINVAL;
+		} else if (beacon_rate->control[band].he_mcs[i]) {
+			count_he++;
+			if (count_he > 1)
+				return -EINVAL;
+		}
+		if (count_he && rate)
+			return -EINVAL;
+	}
+
+	if ((count_ht && count_vht && count_he) ||
+	    (!rate && !count_ht && !count_vht && !count_he))
 		return -EINVAL;
 
 	if (rate &&
@@ -4787,6 +4804,10 @@ static int validate_beacon_tx_rate(struct cfg80211_registered_device *rdev,
 	    !wiphy_ext_feature_isset(&rdev->wiphy,
 				     NL80211_EXT_FEATURE_BEACON_RATE_VHT))
 		return -EINVAL;
+	if (count_he &&
+	    !wiphy_ext_feature_isset(&rdev->wiphy,
+				     NL80211_EXT_FEATURE_BEACON_RATE_HE))
+		return -EINVAL;
 
 	return 0;
 }
Signature · 1 line
2.7.4