FAILED: patch "[PATCH] i2c: imx: Fix external abort on interrupt in exit paths" failed to apply to 4.14-stable tree
Subsystems (4)
[email protected]
maintainerThe patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From e50e4f0b85be308a01b830c5fbdffc657e1a6dd0 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <[email protected]>
Date: Sun, 20 Sep 2020 23:12:38 +0200
Subject: [PATCH] i2c: imx: Fix external abort on interrupt in exit paths
If interrupt comes late, during probe error path or device remove (could be triggered with CONFIG_DEBUG_SHIRQ), the interrupt handler i2c_imx_isr() will access registers with the clock being disabled. This leads to external abort on non-linefetch on Toradex Colibri VF50 module (with Vybrid VF5xx):
Unhandled fault: external abort on non-linefetch (0x1008) at 0x8882d003
Internal error: : 1008 [#1] ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.7.0 #607
Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
(i2c_imx_isr) from [<8017009c>] (free_irq+0x25c/0x3b0)
(free_irq) from [<805844ec>] (release_nodes+0x178/0x284)
(release_nodes) from [<80580030>] (really_probe+0x10c/0x348)
(really_probe) from [<80580380>] (driver_probe_device+0x60/0x170)
(driver_probe_device) from [<80580630>] (device_driver_attach+0x58/0x60)
(device_driver_attach) from [<805806bc>] (__driver_attach+0x84/0xc0)
(__driver_attach) from [<8057e228>] (bus_for_each_dev+0x68/0xb4)
(bus_for_each_dev) from [<8057f3ec>] (bus_add_driver+0x144/0x1ec)
(bus_add_driver) from [<80581320>] (driver_register+0x78/0x110)
(driver_register) from [<8010213c>] (do_one_initcall+0xa8/0x2f4)
(do_one_initcall) from [<80c0100c>] (kernel_init_freeable+0x178/0x1dc)
(kernel_init_freeable) from [<80807048>] (kernel_init+0x8/0x110)
(kernel_init) from [<80100114>] (ret_from_fork+0x14/0x20)Additionally, the i2c_imx_isr() could wake up the wait queue (imx_i2c_struct->queue) before its initialization happens.
The resource-managed framework should not be used for interrupt handling, because the resource will be released too late - after disabling clocks. The interrupt handler is not prepared for such case.
drivers/i2c/busses/i2c-imx.c +13 -11
@@ -1169,14 +1169,6 @@ static int i2c_imx_probe(struct platform_device *pdev)return ret; } -/* Request IRQ */ - ret =devm_request_irq (&pdev->dev, irq, i2c_imx_isr,IRQF_SHARED , - pdev->name, i2c_imx); -if (ret) { -dev_err (&pdev->dev,"can't claim irq %d\n" , irq); - goto clk_disable; - } -/* Init queue */ init_waitqueue_head (&i2c_imx->queue);
@@ -1195,6 +1187,14 @@ static int i2c_imx_probe(struct platform_device *pdev)if (ret <0 ) goto rpm_disable; +/* Request IRQ */ + ret =request_threaded_irq (irq, i2c_imx_isr,NULL ,IRQF_SHARED , + pdev->name, i2c_imx); +if (ret) { +dev_err (&pdev->dev,"can't claim irq %d\n" , irq); + goto rpm_disable; + } +/* Set up clock divider */ i2c_imx->bitrate =I2C_MAX_STANDARD_MODE_FREQ ; ret = of_property_read_u32(pdev->dev.of_node,
@@ -1237,13 +1237,12 @@ static int i2c_imx_probe(struct platform_device *pdev) clk_notifier_unregister:clk_notifier_unregister (i2c_imx->clk, &i2c_imx->clk_change_nb); +free_irq (irq, i2c_imx); rpm_disable:pm_runtime_put_noidle (&pdev->dev);pm_runtime_disable (&pdev->dev);pm_runtime_set_suspended (&pdev->dev);pm_runtime_dont_use_autosuspend (&pdev->dev); - -clk_disable:clk_disable_unprepare (i2c_imx->clk);return ret; }
@@ -1251,7 +1250,7 @@ static int i2c_imx_probe(struct platform_device *pdev)static int i2c_imx_remove (struct platform_device *pdev) {struct imx_i2c_struct *i2c_imx =platform_get_drvdata (pdev); -int ret; +int irq, ret; ret =pm_runtime_get_sync (&pdev->dev);if (ret <0 )
@@ -1271,6 +1270,9 @@ static int i2c_imx_remove(struct platform_device *pdev)imx_i2c_write_reg (0 , i2c_imx,IMX_I2C_I2SR );clk_notifier_unregister (i2c_imx->clk, &i2c_imx->clk_change_nb); + irq =platform_get_irq (pdev,0 ); +if (irq >=0 ) +free_irq (irq, i2c_imx);clk_disable_unprepare (i2c_imx->clk);pm_runtime_put_noidle (&pdev->dev);