FAILED: patch "[PATCH] memory: brcmstb: Add driver for DPFE" failed to apply to 5.4-stable tree
Subsystems (4)
[email protected]
maintainerThe patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 2f330caff5776239abb3e0337533886dbb21f6df Mon Sep 17 00:00:00 2001
From: Markus Mayer <[email protected]>
Date: Thu, 24 Aug 2017 16:36:26 -0700
Subject: [PATCH] memory: brcmstb: Add driver for DPFE
This driver allows access to DRAM properties, such as the refresh rate, via the Broadcom STB DDR PHY Front End (DPFE). The refresh rate can be used as indirect indicator of the DRAM temperature.
The driver also allows setting of the sampling interval.
MAINTAINERS +8 -0
@@ -2963,6 +2963,14 @@ L: [email protected] S: Maintained F: drivers/mtd/nand/brcmnand/ +BROADCOM STB DPFE DRIVER +M: Markus Mayer <[email protected]> +M: [email protected] +L: [email protected] (moderated for non-subscribers) +S: Maintained +F: Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt +F: drivers/memory/brcmstb_dpfe.c + BROADCOM SYSTEMPORT ETHERNET DRIVER M: Florian Fainelli <[email protected]> L: [email protected]
drivers/memory/Makefile +1 -0
@@ -8,6 +8,7 @@ endif obj-$(CONFIG_ARM_PL172_MPMC) += pl172.o obj-$(CONFIG_ATMEL_SDRAMC) += atmel-sdramc.o obj-$(CONFIG_ATMEL_EBI) += atmel-ebi.o +obj-$(CONFIG_ARCH_BRCMSTB) += brcmstb_dpfe.o obj-$(CONFIG_TI_AEMIF) += ti-aemif.o obj-$(CONFIG_TI_EMIF) += emif.o obj-$(CONFIG_OMAP_GPMC) += omap-gpmc.o
drivers/memory/brcmstb_dpfe.c new file +701 -0
701 lines not on this page · raw message