FAILED: patch "[PATCH] arm64: dts: marvell: espressobin: Add ethernet switch aliases" failed to apply to 5.4-stable tree

The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From b64d814257b027e29a474bcd660f6372490138c7 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <[email protected]>
Date: Mon, 7 Sep 2020 13:27:17 +0200
Subject: [PATCH] arm64: dts: marvell: espressobin: Add ethernet switch aliases
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Espressobin boards have 3 ethernet ports and some of them got assigned more then one MAC address. MAC addresses are stored in U-Boot environment.

Since commit a2c7023f7075c ("net: dsa: read mac address from DT for slave device") kernel can use MAC addresses from DT for particular DSA port.

Currently Espressobin DTS file contains alias just for ethernet0.

This patch defines additional ethernet aliases in Espressobin DTS files, so bootloader can fill correct MAC address for DSA switch ports if more MAC addresses were specified.

DT alias ethernet1 is used for wan port, DT aliases ethernet2 and ethernet3 are used for lan ports for both Espressobin revisions (V5 and V7).

Fixes 5253cb8c00a6f ("arm64: dts: marvell: espressobin: add ethernet alias")

Cc <[email protected]> # a2c7023f7075c: dsa: read mac address

Signed-off-by Pali Rohár <[email protected]>

Reviewed-by Andrew Lunn <[email protected]>

Reviewed-by Andre Heider <[email protected]>

Signed-off-by Gregory CLEMENT <[email protected]>

arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts +8 -2

index 03733fd92732..215d2f702623 100644
@@ -20,17 +20,23 @@ / {
 	compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7",
 		     "globalscale,espressobin", "marvell,armada3720",
 		     "marvell,armada3710";
+
+	aliases {
+		/* ethernet1 is wan port */
+		ethernet1 = &switch0port3;
+		ethernet3 = &switch0port1;
+	};
 };
 
 &switch0 {
 	ports {
-		port@1 {
+		switch0port1: port@1 {
 			reg = <1>;
 			label = "lan1";
 			phy-handle = <&switch0phy0>;
 		};
 
-		port@3 {
+		switch0port3: port@3 {
 			reg = <3>;
 			label = "wan";
 			phy-handle = <&switch0phy2>;

arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts +8 -2

index 8570c5f47d7d..b6f4af8ebafb 100644
@@ -19,17 +19,23 @@ / {
 	model = "Globalscale Marvell ESPRESSOBin Board V7";
 	compatible = "globalscale,espressobin-v7", "globalscale,espressobin",
 		     "marvell,armada3720", "marvell,armada3710";
+
+	aliases {
+		/* ethernet1 is wan port */
+		ethernet1 = &switch0port3;
+		ethernet3 = &switch0port1;
+	};
 };
 
 &switch0 {
 	ports {
-		port@1 {
+		switch0port1: port@1 {
 			reg = <1>;
 			label = "lan1";
 			phy-handle = <&switch0phy0>;
 		};
 
-		port@3 {
+		switch0port3: port@3 {
 			reg = <3>;
 			label = "wan";
 			phy-handle = <&switch0phy2>;

arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi +8 -4

index b97218c72727..0775c16e0ec8 100644
@@ -13,6 +13,10 @@
 / {
 	aliases {
 		ethernet0 = &eth0;
+		/* for dsa slave device */
+		ethernet1 = &switch0port1;
+		ethernet2 = &switch0port2;
+		ethernet3 = &switch0port3;
 		serial0 = &uart0;
 		serial1 = &uart1;
 	};

@@ -120,7 +124,7 @@ ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			switch0port0: port@0 {
 				reg = <0>;
 				label = "cpu";
 				ethernet = <&eth0>;

@@ -131,19 +135,19 @@ fixed-link {
 				};
 			};
 
-			port@1 {
+			switch0port1: port@1 {
 				reg = <1>;
 				label = "wan";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			switch0port2: port@2 {
 				reg = <2>;
 				label = "lan0";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@3 {
+			switch0port3: port@3 {
 				reg = <3>;
 				label = "lan1";
 				phy-handle = <&switch0phy2>;