Pull request for u-boot master = u-boot-stm32-20201125
Hi Tom,
Please pull the STM32 related patches for u-boot/master, v2021.01: u-boot-stm32-20201125
- STM32 MCU's DT update
- Add DHCOM based STM32MP15x PicoITX board
- Correct ALIGN macro usage for on syram for SPL dcache support
- Fixes on DHCOM: uSD card-detect GPIO and Drop QSPI CS2
- Fix compilation issue for spl_mmc_boot_partition
- Fix MTD partitions for serial boot
- Add support of MCU HOLD BOOT with reset for stm32 remoteproc (prepare alligneent with kernel DT)
- Correct bias information and support in STM32 soc and STMFX
- Support optional vbus in usbphyc
- Update FIT examples to avoid kernel zImage relocation before decompression
CI status:
https://gitlab.denx.de/u-boot/custodians/u-boot-stm/-/commits/u-boot-stm32-20201125
Thanks,
Patrick
git request-pull origin/master https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git u-boot-stm32-20201125
The following changes since commit d361eafe82bfbf90ab0a592ae59daef99faee5ec:
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usb (2020-11-22 11:00:11 -0500)
are available in the Git repository at:
https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git tags/u-boot-stm32-20201125
for you to fetch changes up to 60a2dd6aa20f6c0938856b764e7ebdee722d998e:
board: st: stm32mp1: update load address for FIT examples (2020-11-25 14:27:19 +0100)
----------------------------------------------------------------
- STM32 MCU's DT update
- Add DHCOM based STM32MP15x PicoITX board
- Correct ALIGN macro usage for on syram for SPL dcache support
- Fixes on DHCOM: uSD card-detect GPIO and Drop QSPI CS2
- Fix compilation issue for spl_mmc_boot_partition
- Fix MTD partitions for serial boot
- Add support of MCU HOLD BOOT with reset for stm32 remoteproc (prepare alligneent with kernel DT)
- Correct bias information and support in STM32 soc and STMFX
- Support optional vbus in usbphyc
- Update FIT examples to avoid kernel zImage relocation before decompression
----------------------------------------------------------------
Marek Vasut (3):
ARM: dts: stm32: Add DHCOM based PicoITX board
ARM: dts: stm32: Fix uSD card-detect GPIO on DHCOM
ARM: dts: stm32: Drop QSPI CS2 on DHCOM
Patrice Chotard (4):
ARM: dts: sync armv7-m.dtsi with kernel v5.10-rc1
ARM: dts: stm32: DT sync with kernel v5.10-rc1 for MCU's boards
ARM: dts: stm32: Fix timer initialization for stm32 MCU's board
ARM: dts: stm32: Fix typo in stm32h7-u-boot.dtsi
Patrick Delaunay (11):
arm: stm32mp: correct the ALIGN macro usage
board: stm32mp1: no MTD partitions fixup for serial boot
reset: stm32: Add support of MCU HOLD BOOT
remoteproc: stm32: use reset for hold boot
remoteproc: stm32: update error management in stm32_copro_start
pinctrl: stm32: display bias information for all pins
gpio: stm32: correct the bias management
pinctrl: stmfx: update pincontrol and gpio device name
pinctrl: stmfx: update pin name
phy: stm32: usbphyc: manage optional vbus regulator on phy_power_on/off
board: st: stm32mp1: update load address for FIT examples
Richard Genoud (1):
SPL: stm32mp1: fix spl_mmc_boot_partition not defined
arch/arm/dts/Makefile | 1 + arch/arm/dts/armv7-m.dtsi | 4 +-- arch/arm/dts/stm32429i-eval-u-boot.dtsi | 6 ++++- arch/arm/dts/stm32429i-eval.dts | 21 ++++++++++----- arch/arm/dts/stm32746g-eval-u-boot.dtsi | 4 +-- arch/arm/dts/stm32746g-eval.dts | 13 +++++----- arch/arm/dts/stm32f4-pinctrl.dtsi | 107 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------- arch/arm/dts/stm32f429-disco-u-boot.dtsi | 6 ++++- arch/arm/dts/stm32f429-disco.dts | 99 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--- arch/arm/dts/stm32f429.dtsi | 30 +++++++++++++++------- arch/arm/dts/stm32f469-disco-u-boot.dtsi | 26 +++++++++++-------- arch/arm/dts/stm32f469-disco.dts | 19 +++++++++----- arch/arm/dts/stm32f469.dtsi | 1 - arch/arm/dts/stm32f7-pinctrl.dtsi | 22 ++++++++-------- arch/arm/dts/stm32f7-u-boot.dtsi | 3 +-- arch/arm/dts/stm32f746-disco-u-boot.dtsi | 8 ++---- arch/arm/dts/stm32f746-disco.dts | 2 +- arch/arm/dts/stm32f746.dtsi | 12 ++++----- arch/arm/dts/stm32f769-disco-u-boot.dtsi | 4 +-- arch/arm/dts/stm32f769-disco.dts | 6 ++--- arch/arm/dts/stm32h7-u-boot.dtsi | 6 ++++- arch/arm/dts/stm32h743-pinctrl.dtsi | 10 ++++---- arch/arm/dts/stm32h743.dtsi | 37 +++++++++++++++++++-------- arch/arm/dts/stm32h743i-disco.dts | 2 +- arch/arm/dts/stm32h743i-eval.dts | 2 +- arch/arm/dts/stm32mp15-u-boot.dtsi | 7 +++++ arch/arm/dts/stm32mp15xx-dhcom-picoitx-u-boot.dtsi | 14 ++++++++++ arch/arm/dts/stm32mp15xx-dhcom-picoitx.dts | 93 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/dts/stm32mp15xx-dhcom.dtsi | 15 +++-------- arch/arm/mach-stm32mp/cpu.c | 4 +-- arch/arm/mach-stm32mp/spl.c | 2 ++ board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its | 22 ++++++++++++++++ board/st/stm32mp1/fit_copro_kernel_dtb.its | 18 +++++++++++-- board/st/stm32mp1/fit_kernel_dtb.its | 6 ++--- board/st/stm32mp1/stm32mp1.c | 11 +++++--- configs/stm32mp15_dhcom_basic_defconfig | 2 +- doc/device-tree-bindings/phy/phy-stm32-usbphyc.txt | 2 ++ drivers/gpio/stm32_gpio.c | 28 ++++++++++---------- drivers/phy/phy-stm32-usbphyc.c | 33 ++++++++++++++++-------- drivers/pinctrl/pinctrl-stmfx.c | 13 ++++++---- drivers/pinctrl/pinctrl_stm32.c | 24 ++++++++--------- drivers/remoteproc/stm32_copro.c | 108 +++++++++++++++++++++++------------------------------------------------------ drivers/reset/stm32-reset.c | 17 +++++++++--- include/dt-bindings/reset/stm32mp1-resets.h | 1 + 44 files changed, 611 insertions(+), 260 deletions(-) create mode 100644 arch/arm/dts/stm32mp15xx-dhcom-picoitx-u-boot.dtsi create mode 100644 arch/arm/dts/stm32mp15xx-dhcom-picoitx.dts
Quoted 28 lines · Patrick DELAUNAY
Hi Tom,
Please pull the STM32 related patches for u-boot/master, v2021.01: u-boot-stm32-20201125
- STM32 MCU's DT update
- Add DHCOM based STM32MP15x PicoITX board
- Correct ALIGN macro usage for on syram for SPL dcache support
- Fixes on DHCOM: uSD card-detect GPIO and Drop QSPI CS2
- Fix compilation issue forspl_mmc_boot_partition
- Fix MTD partitions for serial boot
- Add support of MCU HOLD BOOT with reset for stm32 remoteproc (prepare alligneent with kernel DT)
- Correct bias information and support in STM32 soc and STMFX
- Support optional vbus in usbphyc
- Update FIT examples to avoid kernel zImage relocation before decompressionCI status:
https://gitlab.denx.de/u-boot/custodians/u-boot-stm/-/commits/u-boot-stm32-20201125Thanks,
Patrickgit request-pull origin/master https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git u-boot-stm32-20201125
The following changes since commit
d361eafe82bfbf90ab0a592ae59daef99faee5ec:Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usb (2020-11-22 11:00:11 -0500)
Quoted 8 lines
are available in the Git repository at:
https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git tags/u-boot-stm32-20201125
for you to fetch changes up to
60a2dd6aa20f6c0938856b764e7ebdee722d998e:board: st: stm32mp1: update load address for FIT examples (2020-11-25 14:27:19 +0100)
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20201125/4a8d93f2/attachment.sig>